<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2523" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi again,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I posted a while back about a dead UP2000 cpu. I
was sent replacement CPUs and Motherboard by the seller in an attempt to get
things up and running again. Using the new CPUs (also 667MHz 4MB) it appears the
1st motherboard I have has developed a fault on the secondary CPU slot and it
also appears one of the original CPUs is now dead too.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Unfortuantely, Ive ran into different problems with
the "new" UP2000 board (seems older than the original):</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Upon power on it goes to a blue screen with a
blinking cursor and stays there.</FONT></DIV>
<DIV><FONT face=Arial size=2>I have checked the online manuals (not much
help) and set the system to "Factory Defaults" (no change) and then to
Recovery Using Firmware. When in this Recovery mode I have a bunch of options,
but most SRM commands do not work. I have tried the firmware update (fwupdate)
from within the Recovery Bios, I got it to flash the UP2000 SRM bios by renaming
the UP20SRM.rom FW file to "pc264srm.rom". This flashed, but doesnt seem to have
done anything.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Can anyone point me in the right direction? What do
I do in the Recovery Mode? What could be causing the blue screen with
blinking cursor?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Alan</FONT></DIV></BODY></HTML>