[dm-devel] [PATCH v2] qat: fix deadlock in backlog processing
Mikulas Patocka
mpatocka at redhat.com
Fri Sep 22 16:34:16 UTC 2023
Hi
On Fri, 22 Sep 2023, Giovanni Cabiddu wrote:
> Hi Mikulas,
>
> many thanks for reporting this issue and finding a solution.
>
> On Thu, Sep 21, 2023 at 10:53:55PM +0200, Mikulas Patocka wrote:
> > I was evaluating whether it is feasible to use QAT with dm-crypt (the
> > answer is that it is not - QAT is slower than AES-NI for this type of
> > workload; QAT starts to be benefical for encryption requests longer than
> > 64k).
> Correct. Is there anything that we can do to batch requests in a single
> call?
Ask Herbert Xu. I think it would complicate the design of crypto API.
> Sometime ago there was some work done to build a geniv template cipher
> and optimize dm-crypt to encrypt larger block sizes in a single call,
> see [1][2]. Don't know if that work was completed.
>
> >And I got some deadlocks.
> Ouch!
>
> > The reason for the deadlocks is this: suppose that one of the "if"
> > conditions in "qat_alg_send_message_maybacklog" is true and we jump to the
> > "enqueue" label. At this point, an interrupt comes in and clears all
> > pending messages. Now, the interrupt returns, we grab backlog->lock, add
> > the message to the backlog, drop backlog->lock - and there is no one to
> > remove the backlogged message out of the list and submit it.
> Makes sense. In my testing I wasn't able to reproduce this condition.
I reproduced it with this:
Use a system with two Intel(R) Xeon(R) Gold 5420+ processors
Use a kernel 6.6-rc2
Patch the kernel, so that dm-crypt uses QAT - that is, in
drivers/md/dm-crypt.c, replace all strings
"CRYPTO_ALG_ALLOCATES_MEMORY" with "0"
Use .config from RHEL-9.4 beta and compile the kernel
On the system, disable hyperthreading with
"echo off >/sys/devices/system/cpu/smt/control"
Activate dm-crypt on the top of nvme:
"cryptsetup create cr /dev/nvme3n1 --sector-size=4096"
Run fio in a loop:
"while true; do
fio --ioengine=psync --iodepth=1 --rw=randwrite --direct=1
--end_fsync=1 --bs=64k --numjobs=56 --time_based
--runtime=10 --group_reporting --name=job
--filename=/dev/mapper/cr
done"
With this setup, I get a deadlock in a few iterations of fio.
> > I fixed it with this patch - with this patch, the test passes and there
> > are no longer any deadlocks. I didn't want to add a spinlock to the hot
> > path, so I take it only if some of the condition suggests that queuing may
> > be required.
> >
> > Signed-off-by: Mikulas Patocka <mpatocka at redhat.com>
> > Cc: stable at vger.kernel.org
> The commit message requires a bit of rework to describe the change.
I improved the message and I send a second version of the patch.
> Also, deserves a fixes tag.
"Fixes" tag is for something that worked and that was broken in some
previous commit. A quick search through git shows that QAT backlogging was
broken since the introduction of QAT.
> >
> > ---
> > drivers/crypto/intel/qat/qat_common/qat_algs_send.c | 31 ++++++++++++--------
> > 1 file changed, 20 insertions(+), 11 deletions(-)
> >
> > Index: linux-2.6/drivers/crypto/intel/qat/qat_common/qat_algs_send.c
> > ===================================================================
> > --- linux-2.6.orig/drivers/crypto/intel/qat/qat_common/qat_algs_send.c
> > +++ linux-2.6/drivers/crypto/intel/qat/qat_common/qat_algs_send.c
> > @@ -40,16 +40,6 @@ void qat_alg_send_backlog(struct qat_ins
> > spin_unlock_bh(&backlog->lock);
> > }
> >
> > -static void qat_alg_backlog_req(struct qat_alg_req *req,
> > - struct qat_instance_backlog *backlog)
> > -{
> > - INIT_LIST_HEAD(&req->list);
> Is the initialization of an element no longer needed?
It was never needed. list_add_tail calls __list_add and __list_add
overwrites new->next and new->prev without reading them. So, there's no
need to initialize them.
> > -
> > - spin_lock_bh(&backlog->lock);
> > - list_add_tail(&req->list, &backlog->list);
> > - spin_unlock_bh(&backlog->lock);
> > -}
> > -
> > static int qat_alg_send_message_maybacklog(struct qat_alg_req *req)
> > {
> > struct qat_instance_backlog *backlog = req->backlog;
> > @@ -71,8 +61,27 @@ static int qat_alg_send_message_maybackl
> > return -EINPROGRESS;
> >
> > enqueue:
> > - qat_alg_backlog_req(req, backlog);
> > + spin_lock_bh(&backlog->lock);
> > +
> > + /* If any request is already backlogged, then add to backlog list */
> > + if (!list_empty(&backlog->list))
> > + goto enqueue2;
> >
> > + /* If ring is nearly full, then add to backlog list */
> > + if (adf_ring_nearly_full(tx_ring))
> > + goto enqueue2;
> > +
> > + /* If adding request to HW ring fails, then add to backlog list */
> > + if (adf_send_message(tx_ring, fw_req))
> > + goto enqueue2;
> In a nutshell, you are re-doing the same steps taking the backlog lock.
>
> It should be possible to re-write it so that there is a function that
> attempts enqueuing and if it fails, then the same is called again taking
> the lock.
> If you want I can rework it and resubmit.
Yes, if you prefer it this way, I reworked the patch so that we execute
the same code with or without the spinlock held.
> > +
> > + spin_unlock_bh(&backlog->lock);
> > + return -EINPROGRESS;
> > +
> > +enqueue2:
> > + list_add_tail(&req->list, &backlog->list);
> > +
> > + spin_unlock_bh(&backlog->lock);
> > return -EBUSY;
> > }
>
> [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1276510.html
> [2] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1428293.html
>
> Regards,
>
> --
> Giovanni
>
From: Mikulas Patocka <mpatocka at redhat.com>
Subject: [PATCH] qat: fix deadlock in backlog processing
I was testing QAT with dm-crypt and I got some deadlocks.
The reason for the deadlocks is this: suppose that one of the "if"
conditions in "qat_alg_send_message_maybacklog" is true and we jump to the
"enqueue" label. At this point, an interrupt comes in and clears all
pending messages. Now, the interrupt returns, we grab backlog->lock, add
the message to the backlog, drop backlog->lock - and there is no one to
remove the backlogged message out of the list and submit it.
In order to fix the bug, we must hold the spinlock backlog->lock when we
perform test for free space in the ring - so that the test for free space
and adding the request to a backlog is atomic and can't be interrupted by
an interrupt. Every completion interrupt calls qat_alg_send_backlog which
grabs backlog->lock, so holding this spinlock is sufficient to synchronize
with interrupts.
I didn't want to add a spinlock unconditionally to the hot path for
performance reasons, so I take it only if some of the condition suggests
that queuing may be required.
Signed-off-by: Mikulas Patocka <mpatocka at redhat.com>
Cc: stable at vger.kernel.org
---
drivers/crypto/intel/qat/qat_common/qat_algs_send.c | 23 ++++++++++----------
1 file changed, 12 insertions(+), 11 deletions(-)
Index: linux-2.6/drivers/crypto/intel/qat/qat_common/qat_algs_send.c
===================================================================
--- linux-2.6.orig/drivers/crypto/intel/qat/qat_common/qat_algs_send.c
+++ linux-2.6/drivers/crypto/intel/qat/qat_common/qat_algs_send.c
@@ -40,22 +40,14 @@ void qat_alg_send_backlog(struct qat_ins
spin_unlock_bh(&backlog->lock);
}
-static void qat_alg_backlog_req(struct qat_alg_req *req,
- struct qat_instance_backlog *backlog)
-{
- INIT_LIST_HEAD(&req->list);
-
- spin_lock_bh(&backlog->lock);
- list_add_tail(&req->list, &backlog->list);
- spin_unlock_bh(&backlog->lock);
-}
-
static int qat_alg_send_message_maybacklog(struct qat_alg_req *req)
{
struct qat_instance_backlog *backlog = req->backlog;
struct adf_etr_ring_data *tx_ring = req->tx_ring;
u32 *fw_req = req->fw_req;
+ bool locked = false;
+repeat:
/* If any request is already backlogged, then add to backlog list */
if (!list_empty(&backlog->list))
goto enqueue;
@@ -68,11 +60,20 @@ static int qat_alg_send_message_maybackl
if (adf_send_message(tx_ring, fw_req))
goto enqueue;
+ if (unlikely(locked))
+ spin_unlock_bh(&backlog->lock);
return -EINPROGRESS;
enqueue:
- qat_alg_backlog_req(req, backlog);
+ if (!locked) {
+ spin_lock_bh(&backlog->lock);
+ locked = true;
+ goto repeat;
+ }
+
+ list_add_tail(&req->list, &backlog->list);
+ spin_unlock_bh(&backlog->lock);
return -EBUSY;
}
More information about the dm-devel
mailing list