[edk2-devel] [PATCH v6 1/1] Platform: Intel: Add Stratix 10 platform support
Loh, Tien Hock
tien.hock.loh at intel.com
Mon Aug 5 09:39:04 UTC 2019
Hi Leif,
OK noted, I'll submit a new patch on top of the commit.
I'll also try to ping Micheal.
Thanks
Tien Hock
> -----Original Message-----
> From: Leif Lindholm <leif.lindholm at linaro.org>
> Sent: Monday, August 5, 2019 5:26 PM
> To: Loh, Tien Hock <tien.hock.loh at intel.com>; Kinney, Michael D
> <michael.d.kinney at intel.com>
> Cc: devel at edk2.groups.io; thloh85 at gmail.com; Ard Biesheuvel
> <ard.biesheuvel at linaro.org>
> Subject: Re: [PATCH v6 1/1] Platform: Intel: Add Stratix 10 platform support
>
> Hi Tien Hock,
>
> I have already given my reviewed-by to v5 of this patch.
> So can you please resubmit the changes since then as a separate patch?
>
> But I am still waiting for a response from Mike to
> https://edk2.groups.io/g/devel/message/44042
> before I am able to push the platform support.
>
> Best Regards,
>
> Leif
>
> On Mon, Aug 05, 2019 at 03:34:14AM +0000, Loh, Tien Hock wrote:
> > Hi Leif, Ard, Micheal,
> >
> > Any comments on this patch?
> >
> > Thanks
> > Tien Hock
> >
> > > -----Original Message-----
> > > From: Loh, Tien Hock
> > > Sent: Thursday, August 1, 2019 6:32 PM
> > > To: devel at edk2.groups.io; thloh85 at gmail.com
> > > Cc: Loh, Tien Hock <tien.hock.loh at intel.com>; Ard Biesheuvel
> > > <ard.biesheuvel at linaro.org>; Leif Lindholm <leif.lindholm at linaro.org>;
> > > Kinney, Michael D <michael.d.kinney at intel.com>
> > > Subject: [PATCH v6 1/1] Platform: Intel: Add Stratix 10 platform support
> > >
> > > From: "Tien Hock, Loh" <tien.hock.loh at intel.com>
> > >
> > > Adds support for Intel Stratix 10 Platform.
> > >
> > > Signed-off-by: "Tien Hock, Loh" <tien.hock.loh at intel.com>
> > > Contributed-under: TianoCore Contribution Agreement 1.1
> > > Cc: Ard Biesheuvel <ard.biesheuvel at linaro.org>
> > > Cc: Leif Lindholm <leif.lindholm at linaro.org>
> > > Cc: Michael D Kinney <michael.d.kinney at intel.com>
> > >
> > > ---
> > > v5:
> > > Remove hardcoded UART clock
> > > ---
> > > Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.c
> |
> > > 44 ++
> > > Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.inf
> |
> > > 48 ++
> > >
> > >
> Platform/Intel/Stratix10/Library/IntelPlatformLib/AArch64/ArmPlatformHelp
> > > er.S | 51 ++
> > > Platform/Intel/Stratix10/Library/IntelPlatformLib/IntelPlatformLib.inf
> |
> > > 54 +++
> > > Platform/Intel/Stratix10/Library/IntelPlatformLib/Stratix10Mmu.c
> |
> > > 155 ++++++
> > > Platform/Intel/Stratix10/Library/IntelPlatformLib/Stratix10PlatformLib.c
> |
> > > 153 ++++++
> > > Platform/Intel/Stratix10/Library/PlatformHookLib/PlatformHookLib.c
> |
> > > 43 ++
> > > Platform/Intel/Stratix10/Library/PlatformHookLib/PlatformHookLib.inf
> > > | 40 ++
> > > Platform/Intel/Stratix10/Library/S10ClockManager/S10ClockManager.c
> > > | 121 +++++
> > > Platform/Intel/Stratix10/Library/S10ClockManager/S10ClockManager.h
> > > | 40 ++
> > > Platform/Intel/Stratix10/Readme.md | 61 +++
> > > Platform/Intel/Stratix10/Stratix10SoCPkg.dec | 22 +
> > > Platform/Intel/Stratix10/Stratix10SoCPkg.dsc | 501
> > > ++++++++++++++++++++
> > > Platform/Intel/Stratix10/Stratix10SoCPkg.fdf | 253
> > > ++++++++++
> > > Readme.md | 3 +
> > > 15 files changed, 1589 insertions(+)
> > >
> > > diff --git
> > > a/Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.c
> > > b/Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.c
> > > new file mode 100644
> > > index 000000000000..a801f12bb59e
> > > --- /dev/null
> > > +++
> b/Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.c
> > > @@ -0,0 +1,44 @@
> > > +/** @file
> > > +*
> > > +* Copyright (c) 2019, Intel All rights reserved.
> > > +*
> > > +* This program and the accompanying materials
> > > +* are licensed and made available under the terms and conditions of
> the
> > > BSD License
> > > +* which accompanies this distribution. The full text of the license may
> be
> > > found at
> > > +* http://opensource.org/licenses/bsd-license.php
> > > +*
> > > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS
> IS"
> > > BASIS,
> > > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > > EXPRESS OR IMPLIED.
> > > +*
> > > +**/
> > > +
> > > +
> > > +#include <Uefi.h>
> > > +#include <Guid/GlobalVariable.h>
> > > +#include <Library/ArmLib.h>
> > > +#include <Library/BaseLib.h>
> > > +#include <Library/BaseMemoryLib.h>
> > > +#include <Library/DebugLib.h>
> > > +#include <Library/DevicePathLib.h>
> > > +#include <Library/DxeServicesTableLib.h>
> > > +#include <Library/IoLib.h>
> > > +#include <Library/MemoryAllocationLib.h>
> > > +#include <Library/PrintLib.h>
> > > +#include <Library/UefiBootServicesTableLib.h>
> > > +#include <Library/UefiLib.h>
> > > +#include <Library/UefiRuntimeServicesTableLib.h>
> > > +#include <Protocol/DevicePathFromText.h>
> > > +
> > > +#include "../../Library/S10ClockManager/S10ClockManager.h"
> > > +EFI_STATUS
> > > +EFIAPI
> > > +IntelPlatformDxeEntryPoint (
> > > + IN EFI_HANDLE ImageHandle,
> > > + IN EFI_SYSTEM_TABLE *SystemTable
> > > + )
> > > +{
> > > + EFI_STATUS Status = 0;
> > > +
> > > + return Status;
> > > +}
> > > +
> > > diff --git
> > > a/Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.inf
> > > b/Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.inf
> > > new file mode 100644
> > > index 000000000000..64b398969f1e
> > > --- /dev/null
> > > +++
> > > b/Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.inf
> > > @@ -0,0 +1,48 @@
> > > +#/** @file
> > > +#
> > > +# Copyright (c) 2019, Intel All rights reserved.
> > > +#
> > > +# This program and the accompanying materials
> > > +# are licensed and made available under the terms and conditions of
> the
> > > BSD License
> > > +# which accompanies this distribution. The full text of the license may
> be
> > > found at
> > > +# http://opensource.org/licenses/bsd-license.php
> > > +#
> > > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS
> IS"
> > > BASIS,
> > > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > > EXPRESS OR IMPLIED.
> > > +#
> > > +#
> > > +#**/
> > > +
> > > +[Defines]
> > > + INF_VERSION = 0x0001001B
> > > + BASE_NAME = IntelPlatformDxe
> > > + FILE_GUID = AB87E291-1689-4c7b-B613-FB54A0E38CEA
> > > + MODULE_TYPE = DXE_DRIVER
> > > + VERSION_STRING = 1.0
> > > + ENTRY_POINT = IntelPlatformDxeEntryPoint
> > > +
> > > +[Sources.common]
> > > + IntelPlatformDxe.c
> > > +
> > > +[Packages]
> > > + ArmPkg/ArmPkg.dec
> > > + ArmPlatformPkg/ArmPlatformPkg.dec
> > > + EmbeddedPkg/EmbeddedPkg.dec
> > > + MdePkg/MdePkg.dec
> > > +
> > > +[LibraryClasses]
> > > + ArmLib
> > > + BaseMemoryLib
> > > + DebugLib
> > > + DxeServicesTableLib
> > > + PcdLib
> > > + PrintLib
> > > + SerialPortLib
> > > + UefiBootServicesTableLib
> > > + UefiRuntimeServicesTableLib
> > > + UefiLib
> > > + UefiDriverEntryPoint
> > > +
> > > +[Depex]
> > > + # We depend on these protocols to create the default boot entries
> > > + gEfiVariableArchProtocolGuid AND gEfiVariableWriteArchProtocolGuid
> > > diff --git
> > >
> a/Platform/Intel/Stratix10/Library/IntelPlatformLib/AArch64/ArmPlatformHe
> > > lper.S
> > >
> b/Platform/Intel/Stratix10/Library/IntelPlatformLib/AArch64/ArmPlatformHe
> > > lper.S
> > > new file mode 100644
> > > index 000000000000..2f4cf95cbf13
> > > --- /dev/null
> > > +++
> > >
> b/Platform/Intel/Stratix10/Library/IntelPlatformLib/AArch64/ArmPlatformHe
> > > lper.S
> > > @@ -0,0 +1,51 @@
> > > +//
> > > +// Copyright (c) 2012-2013, ARM Limited. All rights reserved.
> > > +//
> > > +// This program and the accompanying materials
> > > +// are licensed and made available under the terms and conditions of
> the
> > > BSD License
> > > +// which accompanies this distribution. The full text of the license may
> be
> > > found at
> > > +// http://opensource.org/licenses/bsd-license.php
> > > +//
> > > +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS
> IS"
> > > BASIS,
> > > +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > > EXPRESS OR IMPLIED.
> > > +//
> > > +//
> > > +
> > > +#include <AsmMacroIoLibV8.h>
> > > +#include <Library/ArmLib.h>
> > > +
> > > +ASM_FUNC(ArmPlatformPeiBootAction)
> > > + ret
> > > +
> > > +//UINTN
> > > +//ArmPlatformGetCorePosition (
> > > +// IN UINTN MpId
> > > +// );
> > > +// With this function: CorePos = (ClusterId * 4) + CoreId
> > > +ASM_FUNC(ArmPlatformGetCorePosition)
> > > + and x1, x0, #ARM_CORE_MASK
> > > + and x0, x0, #ARM_CLUSTER_MASK
> > > + add x0, x1, x0, LSR #6
> > > + ret
> > > +
> > > +//UINTN
> > > +//ArmPlatformGetPrimaryCoreMpId (
> > > +// VOID
> > > +// );
> > > +ASM_FUNC(ArmPlatformGetPrimaryCoreMpId)
> > > + MOV32 (w0, FixedPcdGet32 (PcdArmPrimaryCore))
> > > + ret
> > > +
> > > +//UINTN
> > > +//ArmPlatformIsPrimaryCore (
> > > +// IN UINTN MpId
> > > +// );
> > > +ASM_FUNC(ArmPlatformIsPrimaryCore)
> > > + MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCoreMask))
> > > + and x0, x0, x1
> > > + MOV32 (w1, FixedPcdGet32 (PcdArmPrimaryCore))
> > > + cmp w0, w1
> > > + mov x0, #1
> > > + mov x1, #0
> > > + csel x0, x0, x1, eq
> > > + ret
> > > diff --git
> > > a/Platform/Intel/Stratix10/Library/IntelPlatformLib/IntelPlatformLib.inf
> > > b/Platform/Intel/Stratix10/Library/IntelPlatformLib/IntelPlatformLib.inf
> > > new file mode 100644
> > > index 000000000000..7693a8604bd9
> > > --- /dev/null
> > > +++
> b/Platform/Intel/Stratix10/Library/IntelPlatformLib/IntelPlatformLib.inf
> > > @@ -0,0 +1,54 @@
> > > +/** @file
> > > +*
> > > +* Stratix 10 Platform Library
> > > +*
> > > +* Copyright (c) 2019, Intel Corporations All rights reserved.
> > > +*
> > > +* This program and the accompanying materials
> > > +* are licensed and made available under the terms and conditions of
> the
> > > BSD License
> > > +* which accompanies this distribution. The full text of the license may
> be
> > > found at
> > > +* http://opensource.org/licenses/bsd-license.php
> > > +*
> > > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS
> IS"
> > > BASIS,
> > > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > > EXPRESS OR IMPLIED.
> > > +*
> > > +**/
> > > +
> > > +[Defines]
> > > + INF_VERSION = 0x0001001B
> > > + BASE_NAME = Stratix10PlatformLib
> > > + FILE_GUID = 99E236C7-D5FD-42A0-B520-60C85C4870B8
> > > + MODULE_TYPE = BASE
> > > + VERSION_STRING = 1.0
> > > + LIBRARY_CLASS = ArmPlatformLib
> > > +
> > > +[Packages]
> > > + ArmPlatformPkg/ArmPlatformPkg.dec
> > > + ArmPkg/ArmPkg.dec
> > > + MdeModulePkg/MdeModulePkg.dec
> > > + MdePkg/MdePkg.dec
> > > + Platform/Intel/Stratix10/Stratix10SoCPkg.dec
> > > +
> > > +[LibraryClasses]
> > > + ArmLib
> > > + ArmMmuLib
> > > + DebugLib
> > > + PlatformHookLib
> > > + IoLib
> > > + PcdLib
> > > +
> > > +[Sources.common]
> > > + Stratix10PlatformLib.c
> > > + Stratix10Mmu.c
> > > + ../S10ClockManager/S10ClockManager.c
> > > +
> > > +[Sources.AArch64]
> > > + AArch64/ArmPlatformHelper.S
> > > +
> > > +[FixedPcd]
> > > + gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
> > > + gArmTokenSpaceGuid.PcdArmPrimaryCore
> > > +
> > > +[Pcd]
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate ##
> PRODUCES
> > > +
> > > diff --git
> a/Platform/Intel/Stratix10/Library/IntelPlatformLib/Stratix10Mmu.c
> > > b/Platform/Intel/Stratix10/Library/IntelPlatformLib/Stratix10Mmu.c
> > > new file mode 100644
> > > index 000000000000..892387bf5d07
> > > --- /dev/null
> > > +++ b/Platform/Intel/Stratix10/Library/IntelPlatformLib/Stratix10Mmu.c
> > > @@ -0,0 +1,155 @@
> > > +/** @file
> > > +*
> > > +* Stratix 10 Mmu configuration
> > > +*
> > > +* Copyright (c) 2019, Intel Corporations All rights reserved.
> > > +*
> > > +* This program and the accompanying materials
> > > +* are licensed and made available under the terms and conditions of
> the
> > > BSD License
> > > +* which accompanies this distribution. The full text of the license may
> be
> > > found at
> > > +* http://opensource.org/licenses/bsd-license.php
> > > +*
> > > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS
> IS"
> > > BASIS,
> > > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > > EXPRESS OR IMPLIED.
> > > +*
> > > +**/
> > > +
> > > +#include <Library/ArmLib.h>
> > > +#include <Library/ArmMmuLib.h>
> > > +#include <Library/ArmPlatformLib.h>
> > > +#include <Library/BaseMemoryLib.h>
> > > +#include <Library/DebugLib.h>
> > > +#include <Library/IoLib.h>
> > > +#include <Library/MemoryAllocationLib.h>
> > > +#include <Library/PcdLib.h>
> > > +#include <Library/TimerLib.h>
> > > +
> > > +// The total number of descriptors, including the final "end-of-table"
> > > descriptor.
> > > +#define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 16
> > > +ARM_MEMORY_REGION_DESCRIPTOR
> > > gVirtualMemoryTable[MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS];
> > > +
> > > +// DDR attributes
> > > +#define DDR_ATTRIBUTES_CACHED
> > > ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK
> > > +#define DDR_ATTRIBUTES_UNCACHED
> > > ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED
> > > +
> > > +#define DRAM_BASE 0x0
> > > +#define DRAM_SIZE 0x40000000
> > > +
> > > +#define FPGA_SLAVES_BASE 0x80000000
> > > +#define FPGA_SLAVES_SIZE 0x60000000
> > > +
> > > +#define PERIPHERAL_BASE 0xF7000000
> > > +#define PERIPHERAL_SIZE 0x08E00000
> > > +
> > > +#define OCRAM_BASE 0xFFE00000
> > > +#define OCRAM_SIZE 0x00100000
> > > +
> > > +#define GIC_BASE 0xFFFC0000
> > > +#define GIC_SIZE 0x00008000
> > > +
> > > +#define MEM64_BASE 0x0100000000
> > > +#define MEM64_SIZE 0x1F00000000
> > > +
> > > +#define DEVICE64_BASE 0x2000000000
> > > +#define DEVICE64_SIZE 0x0100000000
> > > +/**
> > > + Return the Virtual Memory Map of your platform
> > > +
> > > + This Virtual Memory Map is used to initialize the MMU for DXE Phase.
> > > +
> > > + @param[out] VirtualMemoryMap Array of
> > > ARM_MEMORY_REGION_DESCRIPTOR describing a Physical-to-
> > > + Virtual Memory mapping. This array must be ended
> by
> > > a zero-filled
> > > + entry
> > > +
> > > +**/
> > > +VOID
> > > +EFIAPI
> > > +ArmPlatformGetVirtualMemoryMap (
> > > + IN ARM_MEMORY_REGION_DESCRIPTOR** VirtualMemoryMap
> > > + )
> > > +{
> > > + ARM_MEMORY_REGION_DESCRIPTOR *VirtualMemoryTable;
> > > + ARM_MEMORY_REGION_ATTRIBUTES CacheAttributes;
> > > + UINTN Index = 0;
> > > +
> > > + VirtualMemoryTable = &gVirtualMemoryTable[0];
> > > +
> > > + CacheAttributes = DDR_ATTRIBUTES_CACHED;
> > > +
> > > + // Start create the Virtual Memory Map table
> > > + // Our goal is to a simple 1:1 mapping where virtual==physical address
> > > +
> > > + // DDR SDRAM
> > > + VirtualMemoryTable[Index].PhysicalBase = DRAM_BASE;
> > > + VirtualMemoryTable[Index].VirtualBase =
> > > VirtualMemoryTable[Index].PhysicalBase;
> > > + VirtualMemoryTable[Index].Length = DRAM_SIZE;
> > > + VirtualMemoryTable[Index++].Attributes = CacheAttributes;
> > > +
> > > + // FPGA
> > > + VirtualMemoryTable[Index].PhysicalBase = FPGA_SLAVES_BASE;
> > > + VirtualMemoryTable[Index].VirtualBase =
> > > VirtualMemoryTable[Index].PhysicalBase;
> > > + VirtualMemoryTable[Index].Length = FPGA_SLAVES_SIZE;
> > > + VirtualMemoryTable[Index++].Attributes =
> > > ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
> > > +
> > > + // DEVICE 142MB
> > > + VirtualMemoryTable[Index].PhysicalBase = PERIPHERAL_BASE;
> > > + VirtualMemoryTable[Index].VirtualBase =
> > > VirtualMemoryTable[Index].PhysicalBase;
> > > + VirtualMemoryTable[Index].Length = PERIPHERAL_SIZE;
> > > + VirtualMemoryTable[Index++].Attributes =
> > > ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
> > > +
> > > + // OCRAM 1MB but available 256KB
> > > + VirtualMemoryTable[Index].PhysicalBase = OCRAM_BASE;
> > > + VirtualMemoryTable[Index].VirtualBase =
> > > VirtualMemoryTable[Index].PhysicalBase;
> > > + VirtualMemoryTable[Index].Length = OCRAM_SIZE;
> > > + VirtualMemoryTable[Index++].Attributes = CacheAttributes;
> > > +
> > > + // DEVICE 32KB
> > > + VirtualMemoryTable[Index].PhysicalBase = GIC_BASE;
> > > + VirtualMemoryTable[Index].VirtualBase =
> > > VirtualMemoryTable[Index].PhysicalBase;
> > > + VirtualMemoryTable[Index].Length = GIC_SIZE;
> > > + VirtualMemoryTable[Index++].Attributes =
> > > ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
> > > +
> > > + // MEM 124GB
> > > + VirtualMemoryTable[Index].PhysicalBase = MEM64_BASE;
> > > + VirtualMemoryTable[Index].VirtualBase =
> > > VirtualMemoryTable[Index].PhysicalBase;
> > > + VirtualMemoryTable[Index].Length = MEM64_SIZE;
> > > + VirtualMemoryTable[Index++].Attributes = CacheAttributes;
> > > +
> > > + // DEVICE 4GB
> > > + VirtualMemoryTable[Index].PhysicalBase = DEVICE64_BASE;
> > > + VirtualMemoryTable[Index].VirtualBase =
> > > VirtualMemoryTable[Index].PhysicalBase;
> > > + VirtualMemoryTable[Index].Length = DEVICE64_SIZE;
> > > + VirtualMemoryTable[Index++].Attributes =
> > > ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
> > > +
> > > + // End of Table
> > > + VirtualMemoryTable[Index].PhysicalBase = 0;
> > > + VirtualMemoryTable[Index].VirtualBase = 0;
> > > + VirtualMemoryTable[Index].Length = 0;
> > > + VirtualMemoryTable[Index++].Attributes =
> > > (ARM_MEMORY_REGION_ATTRIBUTES)0;
> > > +
> > > + ASSERT((Index) <= MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS);
> > > +
> > > + *VirtualMemoryMap = VirtualMemoryTable;
> > > +}
> > > +
> > > +
> > > +VOID
> > > +EFIAPI
> > > +InitMmu (
> > > + VOID
> > > + )
> > > +{
> > > + ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable;
> > > + VOID *TranslationTableBase;
> > > + UINTN TranslationTableSize;
> > > + RETURN_STATUS Status;
> > > + // Construct a Virtual Memory Map for this platform
> > > + ArmPlatformGetVirtualMemoryMap (&MemoryTable);
> > > +
> > > + // Configure the MMU
> > > + Status = ArmConfigureMmu (MemoryTable, &TranslationTableBase,
> > > &TranslationTableSize);
> > > + if (EFI_ERROR (Status)) {
> > > + DEBUG ((DEBUG_ERROR, "Error: Failed to enable MMU\n"));
> > > + }
> > > +}
> > > +
> > > diff --git
> > >
> a/Platform/Intel/Stratix10/Library/IntelPlatformLib/Stratix10PlatformLib.c
> > >
> b/Platform/Intel/Stratix10/Library/IntelPlatformLib/Stratix10PlatformLib.c
> > > new file mode 100644
> > > index 000000000000..8ac30559362d
> > > --- /dev/null
> > > +++
> > >
> b/Platform/Intel/Stratix10/Library/IntelPlatformLib/Stratix10PlatformLib.c
> > > @@ -0,0 +1,153 @@
> > > +/** @file
> > > +*
> > > +* Stratix 10 Platform Library
> > > +*
> > > +* Copyright (c) 2019, Intel Corporations All rights reserved.
> > > +*
> > > +* This program and the accompanying materials
> > > +* are licensed and made available under the terms and conditions of
> the
> > > BSD License
> > > +* which accompanies this distribution. The full text of the license may
> be
> > > found at
> > > +* http://opensource.org/licenses/bsd-license.php
> > > +*
> > > +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS
> IS"
> > > BASIS,
> > > +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > > EXPRESS OR IMPLIED.
> > > +*
> > > +**/
> > > +
> > > +#include <Library/ArmLib.h>
> > > +#include <Library/ArmPlatformLib.h>
> > > +#include <Library/DebugLib.h>
> > > +#include <Library/IoLib.h>
> > > +#include <Library/PcdLib.h>
> > > +#include <Library/TimerLib.h>
> > > +#include <Ppi/ArmMpCoreInfo.h>
> > > +
> > > +#define ALT_RSTMGR_OFST 0xffd11000
> > > +#define ALT_RSTMGR_PER1MODRST_OFST 0x28
> > > +#define ALT_RSTMGR_PER1MODRST_WATCHDOG0_SET_MSK
> 0x00000001
> > > +#define ALT_RSTMGR_PER1MODRST_L4SYSTIMER0_CLR_MSK 0xffffffef
> > > +
> > > +STATIC EFI_GUID mArmMpCoreInfoPpiGuid =
> > > ARM_MP_CORE_INFO_PPI_GUID;
> > > +// This Table will be consume by Hob init code to publish it into HOB as
> > > MPCore Info
> > > +// Hob init code will retrieve it by calling PrePeiCoreGetMpCoreInfo via
> Ppi
> > > +STATIC ARM_CORE_INFO mArmPlatformNullMpCoreInfoTable[] = {
> > > + {
> > > + // Cluster 0, Core 0
> > > + 0x0, 0x0,
> > > +
> > > + // MP Core MailBox Set/Get/Clear Addresses and Clear Value
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (UINT64)0xFFFFFFFF
> > > + },
> > > + {
> > > + // Cluster 0, Core 1
> > > + 0x0, 0x1,
> > > +
> > > + // MP Core MailBox Set/Get/Clear Addresses and Clear Value
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (UINT64)0xFFFFFFFF
> > > + },
> > > + {
> > > + // Cluster 0, Core 2
> > > + 0x0, 0x2,
> > > +
> > > + // MP Core MailBox Set/Get/Clear Addresses and Clear Value
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (UINT64)0xFFFFFFFF
> > > + },
> > > + {
> > > + // Cluster 0, Core 3
> > > + 0x0, 0x3,
> > > +
> > > + // MP Core MailBox Set/Get/Clear Addresses and Clear Value
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (EFI_PHYSICAL_ADDRESS)0,
> > > + (UINT64)0xFFFFFFFF
> > > + }
> > > +};
> > > +
> > > +STATIC
> > > +VOID
> > > +AssertWatchDogTimerZeroReset (
> > > + VOID
> > > + )
> > > +{
> > > + // Assert the Reset signal of Watchdog Timer 0 which may have been
> > > enabled by BootROM
> > > + MmioOr32 (ALT_RSTMGR_OFST +
> > > + ALT_RSTMGR_PER1MODRST_OFST,
> > > + ALT_RSTMGR_PER1MODRST_WATCHDOG0_SET_MSK);
> > > +}
> > > +
> > > +/**
> > > + * Return the current Boot Mode
> > > + *
> > > + * This function returns the boot reason on the platform
> > > + *
> > > + * **/
> > > +EFI_BOOT_MODE
> > > +ArmPlatformGetBootMode (
> > > + VOID
> > > + )
> > > +{
> > > + return BOOT_WITH_FULL_CONFIGURATION;
> > > +}
> > > +
> > > +
> > > +/**
> > > + Initialize controllers that must setup before entering PEI MAIN
> > > +**/
> > > +RETURN_STATUS
> > > +ArmPlatformInitialize (
> > > + IN UINTN MpId
> > > + )
> > > +{
> > > + AssertWatchDogTimerZeroReset();
> > > + return EFI_SUCCESS;
> > > +}
> > > +
> > > +//-----------------------------------------------------------------------------------------
> > > +// BEGIN ARM CPU RELATED CODE
> > > +//-----------------------------------------------------------------------------------------
> > > +
> > > +EFI_STATUS
> > > +PrePeiCoreGetMpCoreInfo (
> > > + OUT UINTN *CoreCount,
> > > + OUT ARM_CORE_INFO **ArmCoreTable
> > > + )
> > > +{
> > > + *CoreCount = ARRAY_SIZE(mArmPlatformNullMpCoreInfoTable);
> > > + *ArmCoreTable = mArmPlatformNullMpCoreInfoTable;
> > > + return EFI_SUCCESS;
> > > +}
> > > +
> > > +ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = {
> PrePeiCoreGetMpCoreInfo
> > > };
> > > +
> > > +EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = {
> > > + {
> > > + EFI_PEI_PPI_DESCRIPTOR_PPI,
> > > + &mArmMpCoreInfoPpiGuid,
> > > + &mMpCoreInfoPpi
> > > + }
> > > +};
> > > +
> > > +VOID
> > > +ArmPlatformGetPlatformPpiList (
> > > + OUT UINTN *PpiListSize,
> > > + OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
> > > + )
> > > +{
> > > + *PpiListSize = sizeof(gPlatformPpiTable);
> > > + *PpiList = gPlatformPpiTable;
> > > +}
> > > +
> > > +//-----------------------------------------------------------------------------------------
> > > +// END ARM CPU RELATED CODE
> > > +//-----------------------------------------------------------------------------------------
> > > +
> > > diff --git
> > > a/Platform/Intel/Stratix10/Library/PlatformHookLib/PlatformHookLib.c
> > > b/Platform/Intel/Stratix10/Library/PlatformHookLib/PlatformHookLib.c
> > > new file mode 100644
> > > index 000000000000..d367e5ebf8b3
> > > --- /dev/null
> > > +++
> b/Platform/Intel/Stratix10/Library/PlatformHookLib/PlatformHookLib.c
> > > @@ -0,0 +1,43 @@
> > > +/** @file
> > > + Platform Hook Library
> > > +
> > > +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> > > +SPDX-License-Identifier: BSD-2-Clause-Patent
> > > +
> > > +**/
> > > +
> > > +#include <Base.h>
> > > +#include <Uefi/UefiBaseType.h>
> > > +#include <Library/PlatformHookLib.h>
> > > +#include <Library/BaseLib.h>
> > > +#include <Library/IoLib.h>
> > > +#include <Library/PcdLib.h>
> > > +
> > > +#include "../S10ClockManager/S10ClockManager.h"
> > > +
> > > +/**
> > > + Performs platform specific initialization required for the CPU to access
> > > + the hardware associated with a SerialPortLib instance. This function
> does
> > > + not initialize the serial port hardware itself. Instead, it initializes
> > > + hardware devices that are required for the CPU to access the serial port
> > > + hardware. This function may be called more than once.
> > > +
> > > + @retval RETURN_SUCCESS The platform specific initialization
> > > succeeded.
> > > + @retval RETURN_DEVICE_ERROR The platform specific initialization
> could
> > > not be completed.
> > > +
> > > +**/
> > > +RETURN_STATUS
> > > +EFIAPI
> > > +PlatformHookSerialPortInitialize (
> > > + VOID
> > > + )
> > > +{
> > > + RETURN_STATUS Status;
> > > +
> > > + Status = PcdSet32S (PcdSerialClockRate,
> S10ClockManagerGetUartClock());
> > > + if (RETURN_ERROR (Status)) {
> > > + return Status;
> > > + }
> > > +
> > > + return RETURN_SUCCESS;
> > > +}
> > > diff --git
> > > a/Platform/Intel/Stratix10/Library/PlatformHookLib/PlatformHookLib.inf
> > > b/Platform/Intel/Stratix10/Library/PlatformHookLib/PlatformHookLib.inf
> > > new file mode 100644
> > > index 000000000000..cdc4a51c40c0
> > > --- /dev/null
> > > +++
> b/Platform/Intel/Stratix10/Library/PlatformHookLib/PlatformHookLib.inf
> > > @@ -0,0 +1,40 @@
> > > +## @file
> > > +# Platform Hook Library instance for UART device.
> > > +#
> > > +# Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
> > > +#
> > > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > > +#
> > > +##
> > > +
> > > +[Defines]
> > > + INF_VERSION = 0x0001001B
> > > + BASE_NAME = PlatformHookLib
> > > + FILE_GUID = 90A73C58-A6E3-4EED-A1A3-6F9C7C3D998F
> > > + MODULE_TYPE = BASE
> > > + VERSION_STRING = 1.0
> > > + LIBRARY_CLASS = PlatformHookLib
> > > + CONSTRUCTOR = PlatformHookSerialPortInitialize
> > > +
> > > +[Sources]
> > > + PlatformHookLib.c
> > > + ../S10ClockManager/S10ClockManager.c
> > > +
> > > +[LibraryClasses]
> > > + PcdLib
> > > + PciLib
> > > +
> > > +[Packages]
> > > + MdePkg/MdePkg.dec
> > > + MdeModulePkg/MdeModulePkg.dec
> > > + UefiPayloadPkg/UefiPayloadPkg.dec
> > > +
> > > +[Pcd]
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio ##
> PRODUCES
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase ##
> PRODUCES
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate ##
> PRODUCES
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride ##
> PRODUCES
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate ##
> PRODUCES
> > > + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate ##
> PRODUCES
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters ##
> > > PRODUCES
> > > +
> > > diff --git
> > > a/Platform/Intel/Stratix10/Library/S10ClockManager/S10ClockManager.c
> > > b/Platform/Intel/Stratix10/Library/S10ClockManager/S10ClockManager.c
> > > new file mode 100644
> > > index 000000000000..6698c80de90f
> > > --- /dev/null
> > > +++
> > > b/Platform/Intel/Stratix10/Library/S10ClockManager/S10ClockManager.c
> > > @@ -0,0 +1,121 @@
> > > +#include <Library/IoLib.h>
> > > +#include "S10ClockManager.h"
> > > +
> > > +UINT32
> > > +S10ClockManagerGetPerClock() {
> > > + UINT32 PllGlob, MDiv, RefClkDiv, RefClk;
> > > +
> > > + PllGlob = MmioRead32(CLOCK_MANAGER_PERPLL +
> > > CLOCK_MANAGER_PERPLL_PLLGLOB);
> > > +
> > > + switch (CLOCK_MANAGER_MAINPLL_PLLGLOB_PSRC(PllGlob)) {
> > > + case CLOCK_MANAGER_PLLGLOB_PSRC_EOSC1:
> > > + RefClk = MmioRead32(S10_SYSTEM_MANAGER +
> > > S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD1);
> > > + break;
> > > + case CLOCK_MANAGER_PLLGLOB_PSRC_INTOSC:
> > > + RefClk = S10_CLOCK_INTOSC;
> > > + break;
> > > + case CLOCK_MANAGER_PLLGLOB_PSRC_F2S:
> > > + RefClk = MmioRead32(S10_SYSTEM_MANAGER +
> > > S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD2);
> > > + break;
> > > + }
> > > +
> > > + RefClkDiv = CLOCK_MANAGER_PLLGLOB_REFCLKDIV(PllGlob);
> > > +
> > > + MDiv = MmioRead32(CLOCK_MANAGER_MAINPLL +
> > > CLOCK_MANAGER_FDBCK);
> > > +
> > > + return (RefClk / RefClkDiv) * (6 + MDiv);
> > > +}
> > > +
> > > +UINT32
> > > +S10ClockManagerGetMainClock() {
> > > + UINT32 PllGlob, MDiv, RefClkDiv, RefClk;
> > > +
> > > + PllGlob = MmioRead32(CLOCK_MANAGER_MAINPLL +
> > > CLOCK_MANAGER_MAINPLL_PLLGLOB);
> > > +
> > > + switch (CLOCK_MANAGER_MAINPLL_PLLGLOB_PSRC(PllGlob)) {
> > > + case CLOCK_MANAGER_PLLGLOB_PSRC_EOSC1:
> > > + RefClk = MmioRead32(S10_SYSTEM_MANAGER +
> > > S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD1);
> > > + break;
> > > + case CLOCK_MANAGER_PLLGLOB_PSRC_INTOSC:
> > > + RefClk = S10_CLOCK_INTOSC;
> > > + break;
> > > + case CLOCK_MANAGER_PLLGLOB_PSRC_F2S:
> > > + RefClk = MmioRead32(S10_SYSTEM_MANAGER +
> > > S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD2);
> > > + break;
> > > + }
> > > +
> > > + RefClkDiv = CLOCK_MANAGER_PLLGLOB_REFCLKDIV(PllGlob);
> > > + MDiv =
> > >
> CLOCK_MANAGER_FDBCK_MDIV(MmioRead32(CLOCK_MANAGER_MAINPLL
> > > + CLOCK_MANAGER_PERPLL_FDBCK));
> > > +
> > > + return (RefClk / RefClkDiv) * (6 + MDiv);
> > > +}
> > > +
> > > +INTN
> > > +S10ClockManagerGetL3MainClock() {
> > > + UINT32 Clock;
> > > + UINT32 ClockSrc = MmioRead32(CLOCK_MANAGER_MAINPLL +
> > > CLOCK_MANAGER_MAINPLL_NOCCLK);
> > > +
> > > + ClockSrc = (ClockSrc >> CLOCK_MANAGER_SRC) &
> > > CLOCK_MANAGER_SRC_MSK;
> > > +
> > > + switch (ClockSrc) {
> > > + case CLOCK_MANAGER_SRC_MAIN:
> > > + Clock = S10ClockManagerGetMainClock() /
> > > +
> > > CLOCK_MANAGER_PLLC1_DIV(MmioRead32(CLOCK_MANAGER_MAINPLL
> +
> > > CLOCK_MANAGER_PLLC1));
> > > + break;
> > > + case CLOCK_MANAGER_SRC_PERI:
> > > + Clock = S10ClockManagerGetPerClock() /
> > > +
> CLOCK_MANAGER_PLLC1_DIV(MmioRead32(CLOCK_MANAGER_PERPLL
> > > + CLOCK_MANAGER_PLLC1));
> > > + break;
> > > + case CLOCK_MANAGER_SRC_OSC1:
> > > + Clock = MmioRead32(S10_SYSTEM_MANAGER +
> > > S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD1);
> > > + break;
> > > + case CLOCK_MANAGER_SRC_INTOSC:
> > > + Clock = S10_CLOCK_INTOSC;
> > > + break;
> > > + case CLOCK_MANAGER_SRC_FPGA:
> > > + Clock = MmioRead32(S10_SYSTEM_MANAGER +
> > > S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD2);
> > > + break;
> > > + }
> > > +
> > > + Clock /= 1 + (MmioRead32(CLOCK_MANAGER_MAINPLL +
> > > CLOCK_MANAGER_MAINPLL_NOCCLK) & CLOCK_MANAGER_CNT_MSK);
> > > +
> > > + return Clock;
> > > +}
> > > +
> > > +UINT32
> > > +S10ClockManagerGetUartClock() {
> > > + return S10ClockManagerGetL3MainClock() /
> > > + (1 <<
> > >
> (CLOCK_MANAGER_NOCDIV_L4SPCLK(MmioRead32(CLOCK_MANAGER_MAI
> > > NPLL_NOCDIV))));
> > > +}
> > > +
> > > +UINT32
> > > +S10ClockManagerGetMmcClock() {
> > > + UINT32 Clock = MmioRead32(CLOCK_MANAGER_PERPLL +
> > > CLOCK_MANAGER_PERPLL_CNTR6CLK);
> > > +
> > > + Clock = (Clock >> CLOCK_MANAGER_SRC) &
> CLOCK_MANAGER_SRC_MSK;
> > > +
> > > + switch (Clock) {
> > > + case CLOCK_MANAGER_SRC_MAIN:
> > > + Clock = S10ClockManagerGetL3MainClock();
> > > + Clock /= 1 + (MmioRead32(CLOCK_MANAGER_PERPLL +
> > > CLOCK_MANAGER_PERPLL_CNTR6CLK) &
> > > + CLOCK_MANAGER_CNT_MSK);
> > > + break;
> > > + case CLOCK_MANAGER_SRC_PERI:
> > > + Clock = S10ClockManagerGetPerClock();
> > > + Clock /= 1 + (MmioRead32(CLOCK_MANAGER_PERPLL +
> > > CLOCK_MANAGER_PERPLL_CNTR6CLK) &
> > > + CLOCK_MANAGER_CNT_MSK);
> > > + break;
> > > + case CLOCK_MANAGER_SRC_OSC1:
> > > + Clock = MmioRead32(S10_SYSTEM_MANAGER +
> > > S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD1);
> > > + break;
> > > + case CLOCK_MANAGER_SRC_INTOSC:
> > > + Clock = S10_CLOCK_INTOSC;
> > > + break;
> > > + case CLOCK_MANAGER_SRC_FPGA:
> > > + Clock = MmioRead32(S10_SYSTEM_MANAGER +
> > > S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD2);
> > > + break;
> > > + }
> > > +
> > > + return Clock / 4;
> > > +}
> > > +
> > > diff --git
> > > a/Platform/Intel/Stratix10/Library/S10ClockManager/S10ClockManager.h
> > > b/Platform/Intel/Stratix10/Library/S10ClockManager/S10ClockManager.h
> > > new file mode 100644
> > > index 000000000000..7e58d66a60f9
> > > --- /dev/null
> > > +++
> > > b/Platform/Intel/Stratix10/Library/S10ClockManager/S10ClockManager.h
> > > @@ -0,0 +1,40 @@
> > > +#ifndef _S10_CLOCK_MANAGER_
> > > +#define _S10_CLOCK_MANAGER_
> > > +#define CLOCK_MANAGER_MAINPLL 0xffd10030
> > > +#define CLOCK_MANAGER_MAINPLL_NOCCLK 0x4c
> > > +
> > > +#define CLOCK_MANAGER_PERPLL 0xffd100a4
> > > +#define CLOCK_MANAGER_MAINPLL_PLLGLOB 0x44
> > > +#define CLOCK_MANAGER_PERPLL_PLLGLOB 0x40
> > > +#define CLOCK_MANAGER_MAINPLL_PLLGLOB_PSRC(x) (((x) >> 16) &
> 3)
> > > +#define CLOCK_MANAGER_CNTR6CLK 0x4c
> > > +#define CLOCK_MANAGER_PLLGLOB_PSRC_EOSC1 0
> > > +#define CLOCK_MANAGER_PLLGLOB_PSRC_INTOSC 1
> > > +#define CLOCK_MANAGER_PLLGLOB_PSRC_F2S 2
> > > +#define CLOCK_MANAGER_SRC 16
> > > +#define CLOCK_MANAGER_SRC_MSK 0x7
> > > +#define CLOCK_MANAGER_SRC_MAIN (0)
> > > +#define CLOCK_MANAGER_SRC_PERI (1)
> > > +#define CLOCK_MANAGER_SRC_OSC1 (2)
> > > +#define CLOCK_MANAGER_SRC_INTOSC (3)
> > > +#define CLOCK_MANAGER_SRC_FPGA (4)
> > > +#define CLOCK_MANAGER_FDBCK 0x44
> > > +#define CLOCK_MANAGER_FDBCK_MDIV(x) ((x) >> 24 & 0xff)
> > > +#define CLOCK_MANAGER_PERPLL_FDBCK 0x48
> > > +#define CLOCK_MANAGER_CNT_MSK 0x3ff
> > > +#define CLOCK_MANAGER_PERPLL_CNTR6CLK 0x28
> > > +#define CLOCK_MANAGER_PLLGLOB_REFCLKDIV(x) (((x) >> 8) &
> 0x3f)
> > > +#define CLOCK_MANAGER_PLLC1_DIV(x) ((x) & 0x7f)
> > > +#define CLOCK_MANAGER_PLLC1 0x54
> > > +#define CLOCK_MANAGER_NOCDIV_L4SPCLK(x) ((x) >> 16 & 0x3)
> > > +#define CLOCK_MANAGER_MAINPLL_NOCDIV 0x40
> > > +
> > > +#define S10_SYSTEM_MANAGER 0xffd12000
> > > +#define S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD1 0x204
> > > +#define S10_SYSTEM_MANAGER_BOOTSCRATCH_COLD2 0x208
> > > +#define S10_CLOCK_INTOSC 460000000
> > > +
> > > +UINT32 S10ClockManagerGetMmcClock();
> > > +UINT32 S10ClockManagerGetUartClock();
> > > +
> > > +#endif
> > > diff --git a/Platform/Intel/Stratix10/Readme.md
> > > b/Platform/Intel/Stratix10/Readme.md
> > > new file mode 100644
> > > index 000000000000..f0348332e106
> > > --- /dev/null
> > > +++ b/Platform/Intel/Stratix10/Readme.md
> > > @@ -0,0 +1,61 @@
> > > +Intel Stratix 10 Platform
> > > +=========================
> > > +
> > > +# Summary
> > > +
> > > +This is a port of 64-bit Tiano Core UEFI for the Intel Stratix 10 platform
> > > +based on Stratix 10 SX development board.
> > > +
> > > +This UEFI port works with ATF + UEFI implementation for Intel Stratix 10
> > > board, and
> > > +will boot to Linux port of Stratix 10.
> > > +
> > > +# Status
> > > +
> > > +This firmware has been validated to boot to Linux for Stratix 10 that can
> be
> > > obtained from
> > > +https://github.com/altera-opensource/linux-socfpga.
> > > +
> > > +The default boot is the UEFI shell. The UEFI
> > > +shell will run startup.nsh by default, and you may change the
> startup.nsh to
> > > run commands on boot.
> > > +
> > > +# Building the firmware
> > > +
> > > +- Fetch the ATF, edk2, and edk2-platforms repositories into local host.
> > > + Make all the repositories in the same ${BUILD\_PATH}.
> > > +
> > > +- Install the AARCH64 GNU 4.8 toolchain.
> > > +
> > > +- Build UEFI using Stratix 10 platform as configuration
> > > +
> > > + . edksetup.sh
> > > +
> > > + build -a AARCH64 -p Platform/Intel/Stratix10/Stratix10SoCPkg.dsc -t
> > > GCC5 -b RELEASE -y report.log -j build.log -Y PCD -Y LIBRARY -Y FLASH -Y
> > > DEPEX -Y BUILD_FLAGS -Y FIXED_ADDRESS
> > > +
> > > +Note: Refer to build instructions from the top level edk2-platforms
> > > Readme.md for further details
> > > +
> > > +- Build ATF for Stratix 10 platform (commit
> > > id:2cbeee4d519bac0d79da98faae969fae9f9558f9 is tested and known
> > > working)
> > > +
> > > + make CROSS_COMPILE=aarch64-linux-gnu- device=s10
> > > +
> > > +- Build atf providing the previously generated UEFI as the BL33 image
> > > +
> > > + make CROSS_COMPILE=aarch64-linux-gnu- bl2 fip PLAT=stratix10
> > > + BL33=PEI.ROM
> > > +
> > > +Install Procedure
> > > +-----------------
> > > +
> > > +- dd fip.bin to a A2 partition on the MMC drive to be booted in Stratix 10
> > > + board.
> > > +
> > > +- Generate a SOF containing bl2
> > > +
> > > +.. code:: bash
> > > + aarch64-linux-gnu-objcopy -I binary -O ihex --change-addresses
> > > 0xffe00000 bl2.bin bl2.hex
> > > + quartus_cpf --bootloader bl2.hex <quartus_generated_sof>
> > > <output_sof_with_bl2>
> > > +
> > > +- Configure SOF to board
> > > +
> > > +.. code:: bash
> > > + nios2-configure-sof <output_sof_with_bl2>
> > > +
> > > +
> > > diff --git a/Platform/Intel/Stratix10/Stratix10SoCPkg.dec
> > > b/Platform/Intel/Stratix10/Stratix10SoCPkg.dec
> > > new file mode 100755
> > > index 000000000000..7c44670d591d
> > > --- /dev/null
> > > +++ b/Platform/Intel/Stratix10/Stratix10SoCPkg.dec
> > > @@ -0,0 +1,22 @@
> > > +#
> > > +# Copyright (c) 2013-2018, Intel All rights reserved.
> > > +#
> > > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > > +#
> > > +
> > > +[Defines]
> > > + DEC_SPECIFICATION = 0x0001001B
> > > + PACKAGE_NAME = Stratix10SocPkg
> > > + PACKAGE_GUID = 45533DD0-C41F-4ab6-A5DF-65B52684AC60
> > > + PACKAGE_VERSION = 0.1
> > > +
> > > +[Includes.common]
> > > +
> > > +[Guids.common]
> > > + gStratix10SocFpgaTokenSpaceGuid = { 0x0fe272eb, 0xb2cf, 0x4390, {
> 0xa5,
> > > 0xc4, 0x60, 0x13, 0x2c, 0x6b, 0xd0, 0x34 } }
> > > +
> > > +[PcdsFeatureFlag.common]
> > > +
> > > +[PcdsFixedAtBuild.common]
> > > +
> > > +
> > > diff --git a/Platform/Intel/Stratix10/Stratix10SoCPkg.dsc
> > > b/Platform/Intel/Stratix10/Stratix10SoCPkg.dsc
> > > new file mode 100755
> > > index 000000000000..69d1d9000b49
> > > --- /dev/null
> > > +++ b/Platform/Intel/Stratix10/Stratix10SoCPkg.dsc
> > > @@ -0,0 +1,501 @@
> > > +#
> > > +# Copyright (c) 2013-2018, Intel All rights reserved.
> > > +#
> > > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > > +#
> > > +
> > >
> +###############################################################
> > > #################
> > > +#
> > > +# Defines Section - statements that will be processed to create a
> Makefile.
> > > +#
> > >
> +###############################################################
> > > #################
> > > +[Defines]
> > > + PLATFORM_NAME = Intel Stratix 10 SoC Development Board
> > > + PLATFORM_GUID = A2D10D02-7C36-4de8-831B-
> EFBFC2092D1B
> > > + PLATFORM_VERSION = 0.1
> > > + FIRMWARE_VERSION = 1.0
> > > + DSC_SPECIFICATION = 0x0001001C
> > > + SUPPORTED_ARCHITECTURES = AARCH64
> > > + BUILD_TARGETS = DEBUG|RELEASE|NOOPT
> > > + SKUID_IDENTIFIER = DEFAULT
> > > + FLASH_DEFINITION =
> Platform/Intel/Stratix10/Stratix10SoCPkg.fdf
> > > + OUTPUT_DIRECTORY = Build/Stratix10SoCPkg
> > > + SECURE_BOOT_ENABLE = FALSE
> > > +
> > >
> +###############################################################
> > > #################
> > > +#
> > > +# Pcd Section - list of all EDK II PCD Entries defined by this Platform
> > > +#
> > >
> +###############################################################
> > > #################
> > > +[PcdsPatchableInModule.common]
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|184320
> > > +
> > > +[PcdsFixedAtBuild.common]
> > > +
> gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable|TRUE
> > > + gArmPlatformTokenSpaceGuid.PcdCoreCount|1
> > > +
> > > + # Stacks for MPCores in PEI Phase
> > > + gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x6d000
> > > + gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x30000
> > > +
> > > + # ARM L2x0 PCDs
> > > + gArmTokenSpaceGuid.PcdL2x0ControllerBase|0xFFFFF000
> > > +
> > > + # ARM GIC
> > > + gArmTokenSpaceGuid.PcdGicDistributorBase|0xFFFC1000
> > > + gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0xFFFC2000
> > > +
> > > + # ARM Floating Point architecture (VFP)
> > > + gArmTokenSpaceGuid.PcdVFPEnabled|1
> > > +
> > > + # System Memory (1GB, minus reserved memory for Linux PSCI calls)
> > > + gArmTokenSpaceGuid.PcdSystemMemoryBase|0x01000000
> > > + gArmTokenSpaceGuid.PcdSystemMemorySize|0x3f000000
> > > +
> > > + # Arm Architectural Timer
> > > + gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|400000000
> > > +
> > > + # Trustzone Enable
> > > + gArmTokenSpaceGuid.PcdTrustzoneSupport|TRUE
> > > +
> > > + #-------------------------------
> > > + # gEfiMdeModulePkgTokenSpaceGuid
> > > + #-------------------------------
> > > +
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L"$(FIRMWA
> > > RE_VERSION)"
> > > +
> > > + #-------------------------------
> > > + # gEfiMdePkgTokenSpaceGuid
> > > + #-------------------------------
> > > +
> gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000
> > > + gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000
> > > + gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
> > > + gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000
> > > + gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF
> > > + gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|0
> > > + gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
> > > + gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
> > > +
> > > + # DEBUG_ASSERT_ENABLED 0x01
> > > + # DEBUG_PRINT_ENABLED 0x02
> > > + # DEBUG_CODE_ENABLED 0x04
> > > + # CLEAR_MEMORY_ENABLED 0x08
> > > + # ASSERT_BREAKPOINT_ENABLED 0x10
> > > + # ASSERT_DEADLOOP_ENABLED 0x20
> > > +!if $(TARGET) == RELEASE
> > > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f
> > > +!else
> > > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f
> > > +!endif
> > > +
> > > + # DEBUG_INIT 0x00000001 // Initialization
> > > + # DEBUG_WARN 0x00000002 // Warnings
> > > + # DEBUG_LOAD 0x00000004 // Load events
> > > + # DEBUG_FS 0x00000008 // EFI File system
> > > + # DEBUG_POOL 0x00000010 // Alloc & Free's
> > > + # DEBUG_PAGE 0x00000020 // Alloc & Free's
> > > + # DEBUG_INFO 0x00000040 // Verbose
> > > + # DEBUG_DISPATCH 0x00000080 // PEI/DXE Dispatchers
> > > + # DEBUG_VARIABLE 0x00000100 // Variable
> > > + # DEBUG_BM 0x00000400 // Boot Manager
> > > + # DEBUG_BLKIO 0x00001000 // BlkIo Driver
> > > + # DEBUG_NET 0x00004000 // SNI Driver
> > > + # DEBUG_UNDI 0x00010000 // UNDI Driver
> > > + # DEBUG_LOADFILE 0x00020000 // UNDI Driver
> > > + # DEBUG_EVENT 0x00080000 // Event messages
> > > + # DEBUG_GCD 0x00100000 // Global Coherency Database changes
> > > + # DEBUG_CACHE 0x00200000 // Memory range cachability changes
> > > + # DEBUG_ERROR 0x80000000 // Error
> > > +# gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x803010CF
> > > + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F
> > > +
> > > + gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x00
> > > +
> > > + #-------------------------------
> > > + # gEmbeddedTokenSpaceGuid
> > > + #-------------------------------
> > > +
> > > + # MMC
> > > + gEmbeddedTokenSpaceGuid.PcdDwEmmcDxeBaseAddress|0xff808000
> > > +
> > >
> gEmbeddedTokenSpaceGuid.PcdDwEmmcDxeClockFrequencyInHz|50000000
> > > +
> > >
> gEmbeddedTokenSpaceGuid.PcdDwEmmcDxeMaxClockFreqInHz|25000000
> > > +
> > > + #
> > > + # Optional feature to help prevent EFI memory map fragments
> > > + # Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob
> > > + # Values are in EFI Pages (4K). DXE Core will make sure that
> > > + # at least this much of each type of memory can be allocated
> > > + # from a single memory range. This way you only end up with
> > > + # maximum of two fragements for each type in the memory map
> > > + # (the memory used, and the free memory that was prereserved
> > > + # but not used).
> > > + #
> > > +
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0
> > > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0
> > > +
> > >
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|8192
> > > +
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|80
> > > +
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|65
> > > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|400
> > > +
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|20000
> > > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|20
> > > + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0
> > > +
> > > + # We want to use the Shell Libraries but don't want it to initialise
> > > + # automatically. We initialise the libraries when the command is called
> by
> > > the
> > > + # Shell.
> > > + gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
> > > +
> > > + # Pcd Settings - UART Serial Terminal
> > > + # Intel Stratix10 SoCFPGA HPS UART0 is 0xFFC02000.
> > > + # Intel Stratix10 SoCFPGA HPS UART1 is 0xFFC02100.
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|TRUE
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterAccessWidth|32
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0xFFC02000
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF,
> 0xFF,
> > > 0xFF, 0xFF, 0xFF}
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|4
> > > +
> > > + gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
> > > +
> > > + gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|5
> > > +
> > > + # RunAxf support via Dynamic Shell Command protocol
> > > + # We want to use the Shell Libraries but don't want it to initialise
> > > + # automatically. We initialise the libraries when the command is called
> by
> > > the
> > > + # Shell.
> > > + gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
> > > +
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21,
> > > 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4,
> 0x66,
> > > 0x23, 0x31 }
> > > +
> > > +!if $(USE_ARM_BDS) == FALSE
> > > +
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationCh
> > > ange|FALSE
> > > +!endif
> > > +
> > > +[PcdsFeatureFlag.common]
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|FALSE
> > > +
> > > + # Use the Vector Table location in CpuDxe. We will not copy the Vector
> > > Table at PcdCpuVectorBaseAddress
> > > + gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE
> > > +
> > > +
> gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE
> > > + # If TRUE, Graphics Output Protocol will be installed on virtual handle
> > > created by ConsplitterDxe.
> > > + # Set FALSE to save size.
> > > + gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|FALSE
> > > +
> > > + #-------------------------------
> > > + # gEfiMdePkgTokenSpaceGuid
> > > + #-------------------------------
> > > + gEfiMdePkgTokenSpaceGuid.PcdComponentNameDisable|TRUE
> > > + gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnosticsDisable|TRUE
> > > + gEfiMdePkgTokenSpaceGuid.PcdComponentName2Disable|TRUE
> > > + gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnostics2Disable|TRUE
> > > +
> > > +[LibraryClasses.common]
> > > + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
> > > +
> > >
> ArmGenericTimerCounterLib|ArmPkg/Library/ArmGenericTimerPhyCounterL
> > > ib/ArmGenericTimerPhyCounterLib.inf
> > > + AcpiLib|EmbeddedPkg/Library/AcpiLib/AcpiLib.inf
> > > +
> > >
> ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler
> > > Lib.inf
> > > + ArmGicLib|ArmPkg/Drivers/ArmGic/ArmGicLib.inf
> > > +
> > >
> ArmPlatformLib|Platform/Intel/Stratix10/Library/IntelPlatformLib/IntelPlatfo
> > > rmLib.inf
> > > +
> > > +
> > >
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/Dxe
> > > ReportStatusCodeLib.inf
> > > +
> FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
> > > + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
> > > +
> > > + ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
> > > +
> > >
> ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlat
> > > formStackLib.inf
> > > + ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf
> > > + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> > > + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> > > +
> > >
> CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCache
> > > MaintenanceLib.inf
> > > +
> > >
> CpuExceptionHandlerLib|ArmPkg/Library/ArmExceptionLib/ArmExceptionLib
> > > .inf
> > > + PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
> > > + CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
> > > +
> > >
> DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/De
> > > faultExceptionHandlerLib.inf
> > > +
> DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
> > > +
> > >
> DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTable
> > > Lib.inf
> > > + FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf
> > > + HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
> > > + HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
> > > + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> > > + PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
> > > +
> > >
> PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BaseP
> > > eCoffGetEntryPointLib.inf
> > > + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> > > +
> > >
> PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformance
> > > LibNull.inf
> > > + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
> > > +
> > >
> RealTimeClockLib|EmbeddedPkg/Library/VirtualRealTimeClockLib/VirtualRea
> > > lTimeClockLib.inf
> > > + TimeBaseLib|EmbeddedPkg/Library/TimeBaseLib/TimeBaseLib.inf
> > > + SemihostLib|ArmPkg/Library/SemihostLib/SemihostLib.inf
> > > +
> > > +
> > >
> SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPort
> > > Lib16550.inf
> > > +
> > >
> PlatformHookLib|Platform/Intel/Stratix10/Library/PlatformHookLib/Platform
> > > HookLib.inf
> > > +
> > > +
> > >
> SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchroniz
> > > ationLib.inf
> > > +
> > >
> UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBoot
> > > ManagerLib.inf
> > > +
> > >
> PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/Platfor
> > > mBootManagerLib.inf
> > > + BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
> > > +
> > > + TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
> > > +
> > > +
> > >
> UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiAp
> > > plicationEntryPoint.inf
> > > +
> > >
> UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBoo
> > > tServicesTableLib.inf
> > > +
> > >
> UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDeco
> > > mpressLib.inf
> > > +
> > >
> UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryP
> > > oint.inf
> > > +
> > >
> UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServices
> > > Lib.inf
> > > + UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
> > > + UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf
> > > +
> > >
> UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/
> > > UefiRuntimeServicesTableLib.inf
> > > +
> > > + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
> > > +
> > >
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/Dxe
> > > ReportStatusCodeLib.inf
> > > + PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf
> > > + PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
> > > +
> > > +
> > >
> CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.in
> > > f
> > > +#
> > >
> GenericBdsLib|IntelFrameworkModulePkg/Library/GenericBdsLib/GenericBd
> > > sLib.inf
> > > +
> > >
> CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/Custo
> > > mizedDisplayLib.inf
> > > +
> > > + #
> > > + # Secure Boot dependencies
> > > + #
> > > +!if $(SECURE_BOOT_ENABLE) == TRUE
> > > + IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
> > > + OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
> > > +
> > >
> TpmMeasurementLib|SecurityPkg/Library/DxeTpmMeasurementLib/DxeTp
> > > mMeasurementLib.inf
> > > +
> AuthVariableLib|SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf
> > > + BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
> > > +
> > > + # re-use the UserPhysicalPresent() dummy implementation from the
> ovmf
> > > tree
> > > +
> > >
> PlatformSecureLib|OvmfPkg/Library/PlatformSecureLib/PlatformSecureLib.in
> > > f
> > > +!else
> > > +
> > >
> TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/Tp
> > > mMeasurementLibNull.inf
> > > +
> > >
> AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableL
> > > ibNull.inf
> > > +!endif
> > > + VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
> > > +
> > > + #-------------------------------
> > > + # These libraries are used by the dynamic EFI Shell commands
> > > + #-------------------------------
> > > + ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
> > > + FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
> > > + SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
> > > +
> > > + #-------------------------------
> > > + # Build Debug / Release
> > > + #-------------------------------
> > > +!if $(TARGET) == RELEASE
> > > + DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
> > > +!else
> > > +
> > >
> DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.i
> > > nf
> > > +!endif
> > > +
> > > +
> > >
> DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLib
> > > Null.inf
> > > +
> > >
> DebugAgentTimerLib|EmbeddedPkg/Library/DebugAgentTimerLibNull/Debu
> > > gAgentTimerLibNull.inf
> > > +
> > >
> DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/Base
> > > DebugPrintErrorLevelLib.inf
> > > +
> > >
> PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeC
> > > offExtraActionLib.inf
> > > +
> > > +[LibraryClasses.common.SEC, LibraryClasses.common.PEI_CORE]
> > > + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
> > > + ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
> > > +
> > >
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/Dxe
> > > ReportStatusCodeLib.inf
> > > +
> > >
> UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDeco
> > > mpressLib.inf
> > > +
> > >
> ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLi
> > > b/PrePiExtractGuidedSectionLib.inf
> > > +
> > >
> LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/Lz
> > > maCustomDecompressLib.inf
> > > +
> > > + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> > > +
> > > + HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
> > > +
> > >
> PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PreP
> > > iHobListPointerLib.inf
> > > +
> > >
> MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/Pre
> > > PiMemoryAllocationLib.inf
> > > +
> > >
> PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformance
> > > Lib.inf
> > > + PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
> > > +
> MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf
> > > +
> > > +[LibraryClasses.common.DXE_DRIVER,
> > > LibraryClasses.common.UEFI_APPLICATION,
> > > LibraryClasses.common.UEFI_DRIVER]
> > > +
> > >
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/Dxe
> > > ReportStatusCodeLib.inf
> > > + ArmGicArchLib|ArmPkg/Library/ArmGicArchLib/ArmGicArchLib.inf
> > > +
> > > +[LibraryClasses.common.PEI_CORE]
> > > +
> > >
> ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLi
> > > b/PrePiExtractGuidedSectionLib.inf
> > > + HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
> > > +
> > >
> LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/Lz
> > > maCustomDecompressLib.inf
> > > +
> > >
> MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemory
> > > AllocationLib.inf
> > > +
> > >
> OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNu
> > > ll/OemHookStatusCodeLibNull.inf
> > > +
> > >
> PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BaseP
> > > eCoffGetEntryPointLib.inf
> > > +
> > >
> PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
> > > + PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
> > > +
> > >
> PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformance
> > > Lib.inf
> > > +
> > >
> PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PreP
> > > iHobListPointerLib.inf
> > > + PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
> > > +
> > >
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/Dxe
> > > ReportStatusCodeLib.inf
> > > +
> > >
> UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDeco
> > > mpressLib.inf
> > > +
> > >
> PeiCrc32GuidedSectionExtractLib|MdeModulePkg/Library/PeiCrc32GuidedSe
> > > ctionExtractLib/PeiCrc32GuidedSectionExtractLib.inf
> > > +
> > > +[LibraryClasses.common.DXE_CORE]
> > > + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> > > +
> > >
> DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.i
> > > nf
> > > + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
> > > +
> > >
> ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeE
> > > xtractGuidedSectionLib.inf
> > > + HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
> > > +
> > >
> MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib
> > > /DxeCoreMemoryAllocationLib.inf
> > > +
> > >
> PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCoreP
> > > erformanceLib.inf
> > > +
> > >
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/Dxe
> > > ReportStatusCodeLib.inf
> > > +
> > >
> UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDeco
> > > mpressLib.inf
> > > +
> > > +[LibraryClasses.common.DXE_DRIVER]
> > > + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
> > > +
> > >
> MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemor
> > > yAllocationLib.inf
> > > +
> > >
> SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLi
> > > b/DxeSecurityManagementLib.inf
> > > +
> > >
> PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerforman
> > > ceLib.inf
> > > +
> > >
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/Dxe
> > > ReportStatusCodeLib.inf
> > > +
> > > +[LibraryClasses.common.UEFI_APPLICATION]
> > > + HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
> > > +
> > >
> MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemor
> > > yAllocationLib.inf
> > > +
> > >
> PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerforman
> > > ceLib.inf
> > > +
> > >
> UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDeco
> > > mpressLib.inf
> > > +
> > > +[LibraryClasses.common.UEFI_DRIVER]
> > > + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
> > > +
> > >
> ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeE
> > > xtractGuidedSectionLib.inf
> > > +
> > >
> MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemor
> > > yAllocationLib.inf
> > > +
> > >
> PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerforman
> > > ceLib.inf
> > > +
> > >
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/Dxe
> > > ReportStatusCodeLib.inf
> > > +
> > >
> UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDeco
> > > mpressLib.inf
> > > +
> > > +[LibraryClasses.common.DXE_RUNTIME_DRIVER]
> > > +!if $(SECURE_BOOT_ENABLE) == TRUE
> > > + BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
> > > +!endif
> > > +
> > >
> CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.in
> > > f
> > > + HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
> > > +
> > >
> MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemor
> > > yAllocationLib.inf
> > > +
> > >
> ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/Dxe
> > > ReportStatusCodeLib.inf
> > > +
> > > +[LibraryClasses.AARCH64.DXE_RUNTIME_DRIVER]
> > > + #
> > > + # PSCI support in EL3 may not be available if we are not running under
> a
> > > PSCI
> > > + # compliant secure firmware, but since the default VExpress
> > > EfiResetSystemLib
> > > + # cannot be supported at runtime (due to the fact that the syscfg
> MMIO
> > > registers
> > > + # cannot be runtime remapped), it is our best bet to get ResetSystem
> > > functionality
> > > + # on these platforms.
> > > + #
> > > +
> > >
> EfiResetSystemLib|ArmPkg/Library/ArmPsciResetSystemLib/ArmPsciResetSys
> > > temLib.inf
> > > +
> > > +[LibraryClasses.ARM, LibraryClasses.AARCH64]
> > > + # It is not possible to prevent the ARM compiler for generic intrinsic
> > > functions.
> > > + # This library provides the instrinsic functions generate by a given
> > > compiler.
> > > + # [LibraryClasses.ARM] and NULL mean link this library into all ARM
> > > images.
> > > + #
> > > + NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
> > > +
> > > + # Add support for GCC stack protector
> > > + NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf
> > > +
> > >
> +###############################################################
> > > #################
> > > +#
> > > +# Components Section - list of all EDK II Modules needed by this
> Platform
> > > +#
> > >
> +###############################################################
> > > #################
> > > +[Components.common]
> > > + MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
> > > + <LibraryClasses>
> > > + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> > > + }
> > > +
> > > + EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
> > > +
> > > + ArmPlatformPkg/PrePi/PeiUniCore.inf {
> > > + <LibraryClasses>
> > > + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> > > + }
> > > +
> > > + #
> > > + # DXE
> > > + #
> > > + MdeModulePkg/Core/Dxe/DxeMain.inf {
> > > + <LibraryClasses>
> > > + #PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> > > +
> > >
> NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32G
> > > uidedSectionExtractLib.inf
> > > + }
> > > +
> > > + MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
> > > + MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
> > > + MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
> > > + MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
> > > + MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
> > > + MdeModulePkg/Application/UiApp/UiApp.inf {
> > > + <LibraryClasses>
> > > +
> > >
> NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
> > > +
> NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
> > > +
> > >
> NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMainten
> > > anceManagerUiLib.inf
> > > + }
> > > +
> > > + ArmPkg/Drivers/TimerDxe/TimerDxe.inf
> > > + ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
> > > + ArmPkg/Drivers/CpuDxe/CpuDxe.inf
> > > + ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
> > > +
> > > + FatPkg/EnhancedFatDxe/Fat.inf
> > > +
> > > + EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
> > > +
> EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
> > > + EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> > > + MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
> > > +
> > > + MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
> > > +
> MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
> > > +
> MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
> > > + MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
> > > +
> > >
> MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDx
> > > e.inf
> > > + MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
> > > + MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
> > > + MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
> > > +
> > >
> MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
> > > +
> > >
> MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
> > > +
> > >
> MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.in
> > > f
> > > +
> > >
> MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCount
> > > erRuntimeDxe.inf
> > > + MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> > > +
> MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
> > > + <LibraryClasses>
> > > + NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
> > > + }
> > > + MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
> > > +
> > > + # Multimedia Card Interface
> > > + EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
> > > + EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.inf
> > > +
> > > + # Shell
> > > + ShellPkg/Application/Shell/Shell.inf {
> > > + <LibraryClasses>
> > > +
> > >
> ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellComman
> > > dLib.inf
> > > +
> > >
> NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2Comma
> > > ndsLib.inf
> > > +
> > >
> NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1Comma
> > > ndsLib.inf
> > > +
> > >
> NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3Comma
> > > ndsLib.inf
> > > +
> > >
> NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1Comm
> > > andsLib.inf
> > > +
> > >
> NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1Com
> > > mandsLib.inf
> > > +
> > >
> NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1Comm
> > > andsLib.inf
> > > +#
> > >
> NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1C
> > > ommandsLib.inf
> > > +
> > >
> HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingL
> > > ib.inf
> > > + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
> > > +
> > >
> BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgC
> > > ommandLib.inf
> > > +
> > > + <PcdsFixedAtBuild>
> > > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xFF
> > > + gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
> > > + gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|8000
> > > + }
> > > +
> > > + #
> > > + # Platform Specific Init for DXE phase
> > > + #
> > > + Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.inf
> > > +
> > > +[BuildOptions]
> > > + #-------------------------------
> > > + # Common
> > > + #-------------------------------
> > > + GCC:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG
> > > + GCC:RELEASE_*_*_DLINK_FLAGS = -z noexecstack -z relro -z now
> > > +
> > > diff --git a/Platform/Intel/Stratix10/Stratix10SoCPkg.fdf
> > > b/Platform/Intel/Stratix10/Stratix10SoCPkg.fdf
> > > new file mode 100755
> > > index 000000000000..2c4e5ee887ca
> > > --- /dev/null
> > > +++ b/Platform/Intel/Stratix10/Stratix10SoCPkg.fdf
> > > @@ -0,0 +1,253 @@
> > > +#
> > > +# Copyright (c) 2019, Intel All rights reserved.
> > > +#
> > > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > > +#
> > > +
> > >
> +###############################################################
> > > #################
> > > +#
> > > +# FD Section
> > > +# The [FD] Section is made up of the definition statements and a
> > > +# description of what goes into the Flash Device Image. Each FD section
> > > +# defines one flash "device" image. A flash device image may be one of
> > > +# the following: Removable media bootable image (like a boot floppy
> > > +# image,) an Option ROM image (that would be "flashed" into an add-in
> > > +# card,) a System "Flash" image (that would be burned into a system's
> > > +# flash) or an Update ("Capsule") image that will be used to update and
> > > +# existing system flash.
> > > +#
> > >
> +###############################################################
> > > #################
> > > +
> > > +[FD.IntelStratix10_EFI]
> > > +BaseAddress = 0x0050000|gArmTokenSpaceGuid.PcdFdBaseAddress #
> The
> > > base address of the Firmware in remapped DRAM.
> > > +Size = 0x00100000|gArmTokenSpaceGuid.PcdFdSize # The size
> in
> > > bytes
> > > +ErasePolarity = 1
> > > +BlockSize = 0x00000001
> > > +NumBlocks = 0x00100000
> > > +
> > >
> +###############################################################
> > > #################
> > > +#
> > > +# FD Region layout
> > > +#
> > > +# A Layout Region start with a eight digit hex offset (leading "0x"
> required)
> > > +# followed by the pipe "|" character,
> > > +# followed by the size of the region, also in hex with the leading "0x"
> > > characters.
> > > +# Must be defined in ascending order and may not overlap.
> > > +# Like:
> > > +# Offset|Size
> > > +# PcdOffsetCName|PcdSizeCName
> > > +# RegionType <FV, DATA, or FILE>
> > > +#
> > >
> +###############################################################
> > > #################
> > > +0x00000000|0x00100000
> > >
> +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> > > +FV = FV_PEIDXE
> > > +
> > > +[FV.FV_PEIDXE]
> > > +FvAlignment = 8
> > > +ERASE_POLARITY = 1
> > > +MEMORY_MAPPED = TRUE
> > > +STICKY_WRITE = TRUE
> > > +LOCK_CAP = TRUE
> > > +LOCK_STATUS = TRUE
> > > +WRITE_DISABLED_CAP = TRUE
> > > +WRITE_ENABLED_CAP = TRUE
> > > +WRITE_STATUS = TRUE
> > > +WRITE_LOCK_CAP = TRUE
> > > +WRITE_LOCK_STATUS = TRUE
> > > +READ_DISABLED_CAP = TRUE
> > > +READ_ENABLED_CAP = TRUE
> > > +READ_STATUS = TRUE
> > > +READ_LOCK_CAP = TRUE
> > > +READ_LOCK_STATUS = TRUE
> > > +
> > > + INF ArmPlatformPkg/PrePi/PeiUniCore.inf
> > > +
> > > + FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
> > > + SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF
> > > PROCESSING_REQUIRED = TRUE {
> > > + SECTION FV_IMAGE = FV_DXE
> > > + }
> > > + }
> > > +
> > > +[FV.FV_DXE]
> > > +BlockSize = 0x00000001
> > > +NumBlocks = 0 # This FV gets compressed so make it just big
> > > enough
> > > +FvAlignment = 8 # FV alignment and FV attributes setting.
> > > +ERASE_POLARITY = 1
> > > +MEMORY_MAPPED = TRUE
> > > +STICKY_WRITE = TRUE
> > > +LOCK_CAP = TRUE
> > > +LOCK_STATUS = TRUE
> > > +WRITE_DISABLED_CAP = TRUE
> > > +WRITE_ENABLED_CAP = TRUE
> > > +WRITE_STATUS = TRUE
> > > +WRITE_LOCK_CAP = TRUE
> > > +WRITE_LOCK_STATUS = TRUE
> > > +READ_DISABLED_CAP = TRUE
> > > +READ_ENABLED_CAP = TRUE
> > > +READ_STATUS = TRUE
> > > +READ_LOCK_CAP = TRUE
> > > +READ_LOCK_STATUS = TRUE
> > > +FvNameGuid = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c
> > > +
> > > + INF MdeModulePkg/Core/Dxe/DxeMain.inf
> > > + INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
> > > + INF
> > > EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
> > > +
> > > + #
> > > + # PI DXE Drivers producing Architectural Protocols (EFI Services)
> > > + #
> > > + INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
> > > + INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
> > > + INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> > > + INF
> > > MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
> > > + INF
> > > MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
> > > + INF
> > >
> MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
> > > + INF
> > >
> MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCount
> > > erRuntimeDxe.inf
> > > + INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
> > > + INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
> > > + INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
> > > +
> > > + # Multiple Console IO support
> > > + INF
> > > MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
> > > + INF
> MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
> > > + INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
> > > + INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
> > > + INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
> > > +
> > > + # ARM packages
> > > + INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
> > > + INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
> > > + INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
> > > +
> > > + # FAT filesystem + GPT/MBR partitioning
> > > + INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
> > > + INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
> > > + INF FatPkg/EnhancedFatDxe/Fat.inf
> > > + INF
> > >
> MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
> > > +
> > > + # Multimedia Card Interface
> > > + INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
> > > + INF EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.inf
> > > +
> > > + # Platform Specific Init for DXE phase
> > > + INF
> > > Platform/Intel/Stratix10/Drivers/IntelPlatformDxe/IntelPlatformDxe.inf
> > > +
> > > + # UEFI application (Shell Embedded Boot Loader)
> > > + INF ShellPkg/Application/Shell/Shell.inf
> > > +
> > > + # Bds
> > > + INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
> > > + INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
> > > + INF MdeModulePkg/Application/UiApp/UiApp.inf
> > > + INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
> > > + INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
> > > +
> > > + # FV Filesystem
> > > + INF
> > >
> MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.in
> > > f
> > > +
> > >
> +###############################################################
> > > #################
> > > +#
> > > +# Rules are use with the [FV] section's module INF type to define
> > > +# how an FFS file is created for a given INF file. The following Rule are
> the
> > > default
> > > +# rules for the different module type. User can add the customized rules
> to
> > > define the
> > > +# content of the FFS file.
> > > +#
> > >
> +###############################################################
> > > #################
> > > +
> > > +
> > >
> +###############################################################
> > > #############
> > > +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation
> section
> > > #
> > >
> +###############################################################
> > > #############
> > > +#
> > > +#[Rule.Common.DXE_DRIVER]
> > > +# FILE DRIVER = $(NAMED_GUID) {
> > > +# DXE_DEPEX DXE_DEPEX Optional
> > > $(INF_OUTPUT)/$(MODULE_NAME).depex
> > > +# COMPRESS PI_STD {
> > > +# GUIDED {
> > > +# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > +# UI STRING="$(MODULE_NAME)" Optional
> > > +# VERSION STRING="$(INF_VERSION)" Optional
> > > BUILD_NUM=$(BUILD_NUMBER)
> > > +# }
> > > +# }
> > > +# }
> > > +#
> > >
> +###############################################################
> > > #############
> > > +
> > > +[Rule.Common.SEC]
> > > + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
> > > + TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > + }
> > > +
> > > +[Rule.Common.PEI_CORE]
> > > + FILE PEI_CORE = $(NAMED_GUID) FIXED {
> > > + TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > + UI STRING ="$(MODULE_NAME)" Optional
> > > + }
> > > +
> > > +[Rule.Common.PEIM]
> > > + FILE PEIM = $(NAMED_GUID) FIXED {
> > > + PEI_DEPEX PEI_DEPEX Optional
> > > $(INF_OUTPUT)/$(MODULE_NAME).depex
> > > + TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > + UI STRING="$(MODULE_NAME)" Optional
> > > + }
> > > +
> > > +[Rule.Common.PEIM.TIANOCOMPRESSED]
> > > + FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
> > > + PEI_DEPEX PEI_DEPEX Optional
> > > $(INF_OUTPUT)/$(MODULE_NAME).depex
> > > + GUIDED A31280AD-481E-41B6-95E8-127F4C984779
> > > PROCESSING_REQUIRED = TRUE {
> > > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > + UI STRING="$(MODULE_NAME)" Optional
> > > + }
> > > + }
> > > +
> > > +[Rule.Common.DXE_CORE]
> > > + FILE DXE_CORE = $(NAMED_GUID) {
> > > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > + UI STRING="$(MODULE_NAME)" Optional
> > > + }
> > > +
> > > +[Rule.Common.UEFI_DRIVER]
> > > + FILE DRIVER = $(NAMED_GUID) {
> > > + DXE_DEPEX DXE_DEPEX Optional
> > > $(INF_OUTPUT)/$(MODULE_NAME).depex
> > > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > + UI STRING="$(MODULE_NAME)" Optional
> > > + }
> > > +
> > > +[Rule.Common.DXE_DRIVER]
> > > + FILE DRIVER = $(NAMED_GUID) {
> > > + DXE_DEPEX DXE_DEPEX Optional
> > > $(INF_OUTPUT)/$(MODULE_NAME).depex
> > > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > + UI STRING="$(MODULE_NAME)" Optional
> > > + }
> > > +
> > > +[Rule.Common.DXE_RUNTIME_DRIVER]
> > > + FILE DRIVER = $(NAMED_GUID) {
> > > + DXE_DEPEX DXE_DEPEX Optional
> > > $(INF_OUTPUT)/$(MODULE_NAME).depex
> > > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > + UI STRING="$(MODULE_NAME)" Optional
> > > + }
> > > +
> > > +[Rule.Common.UEFI_APPLICATION]
> > > + FILE APPLICATION = $(NAMED_GUID) {
> > > + UI STRING ="$(MODULE_NAME)" Optional
> > > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > > + }
> > > +
> > > +[Rule.Common.UEFI_DRIVER.BINARY]
> > > + FILE DRIVER = $(NAMED_GUID) {
> > > + DXE_DEPEX DXE_DEPEX Optional |.depex
> > > + PE32 PE32 |.efi
> > > + UI STRING="$(MODULE_NAME)" Optional
> > > + VERSION STRING="$(INF_VERSION)" Optional
> > > BUILD_NUM=$(BUILD_NUMBER)
> > > + }
> > > +
> > > +[Rule.Common.UEFI_APPLICATION.BINARY]
> > > + FILE APPLICATION = $(NAMED_GUID) {
> > > + PE32 PE32 |.efi
> > > + UI STRING="$(MODULE_NAME)" Optional
> > > + VERSION STRING="$(INF_VERSION)" Optional
> > > BUILD_NUM=$(BUILD_NUMBER)
> > > + }
> > > +
> > > +
> > > +
> > > diff --git a/Readme.md b/Readme.md
> > > index 63e59f60b416..833c1757c025 100644
> > > --- a/Readme.md
> > > +++ b/Readme.md
> > > @@ -229,6 +229,9 @@ they will be documented with the platform.
> > > * [Kaby Lake](Platform/Intel/KabylakeOpenBoardPkg)
> > > * [Purley](Platform/Intel/PurleyOpenBoardPkg)
> > >
> > > +### SoCFPGA Platforms
> > > +* [Stratix10](Platform/Intel/Stratix10)
> > > +
> > > For more information, see the
> > > [EDK II Minimum Platform Specification](https://edk2-
> docs.gitbooks.io/edk-
> > > ii-minimum-platform-specification).
> > > ### Other Platforms
> > > --
> > > 2.19.0
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#44908): https://edk2.groups.io/g/devel/message/44908
Mute This Topic: https://groups.io/mt/32677389/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list