[edk2-devel] [PATCHv2 2/4] MdeModulePkg/UfsPassThruDxe: Refactor UfsExecUicCommand function
Albecki, Mateusz
mateusz.albecki at intel.com
Fri Aug 9 12:20:51 UTC 2019
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
UfsExecUicCommand function has been refactored to allow
the caller to check the command results which is important
for commands such as UIC read.
Cc: Hao A Wu <hao.a.wu at intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki at intel.com>
---
MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h | 1 +
.../Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c | 45 ++++++++++++----------
2 files changed, 25 insertions(+), 21 deletions(-)
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
index e092401f54..fad4a8ee90 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.h
@@ -19,6 +19,7 @@
#include <Protocol/ScsiPassThruExt.h>
#include <Protocol/UfsDeviceConfig.h>
#include <Protocol/UfsHostController.h>
+#include <Protocol/UfsHostControllerPlatform.h>
#include <Library/DebugLib.h>
#include <Library/UefiDriverEntryPoint.h>
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
index 52be852d65..27f5711a31 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
@@ -1669,11 +1669,8 @@ Exit1:
/**
Send UIC command.
- @param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
- @param[in] UicOpcode The opcode of the UIC command.
- @param[in] Arg1 The value for 1st argument of the UIC command.
- @param[in] Arg2 The value for 2nd argument of the UIC command.
- @param[in] Arg3 The value for 3rd argument of the UIC command.
+ @param[in] Private The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
+ @param[in, out] UicCommand UIC command descriptor. On exit contains UIC command results.
@return EFI_SUCCESS Successfully execute this UIC command and detect attached UFS device.
@return EFI_DEVICE_ERROR Fail to execute this UIC command and detect attached UFS device.
@@ -1682,10 +1679,7 @@ Exit1:
EFI_STATUS
UfsExecUicCommands (
IN UFS_PASS_THRU_PRIVATE_DATA *Private,
- IN UINT8 UicOpcode,
- IN UINT32 Arg1,
- IN UINT32 Arg2,
- IN UINT32 Arg3
+ IN OUT EDKII_UIC_COMMAND *UicCommand
)
{
EFI_STATUS Status;
@@ -1711,17 +1705,17 @@ UfsExecUicCommands (
// only after all the UIC command argument registers (UICCMDARG1, UICCMDARG2 and UICCMDARG3)
// are set.
//
- Status = UfsMmioWrite32 (Private, UFS_HC_UCMD_ARG1_OFFSET, Arg1);
+ Status = UfsMmioWrite32 (Private, UFS_HC_UCMD_ARG1_OFFSET, UicCommand->Arg1);
if (EFI_ERROR (Status)) {
return Status;
}
- Status = UfsMmioWrite32 (Private, UFS_HC_UCMD_ARG2_OFFSET, Arg2);
+ Status = UfsMmioWrite32 (Private, UFS_HC_UCMD_ARG2_OFFSET, UicCommand->Arg2);
if (EFI_ERROR (Status)) {
return Status;
}
- Status = UfsMmioWrite32 (Private, UFS_HC_UCMD_ARG3_OFFSET, Arg3);
+ Status = UfsMmioWrite32 (Private, UFS_HC_UCMD_ARG3_OFFSET, UicCommand->Arg3);
if (EFI_ERROR (Status)) {
return Status;
}
@@ -1734,7 +1728,7 @@ UfsExecUicCommands (
return Status;
}
- Status = UfsMmioWrite32 (Private, UFS_HC_UIC_CMD_OFFSET, (UINT32)UicOpcode);
+ Status = UfsMmioWrite32 (Private, UFS_HC_UIC_CMD_OFFSET, UicCommand->Opcode);
if (EFI_ERROR (Status)) {
return Status;
}
@@ -1748,14 +1742,18 @@ UfsExecUicCommands (
return Status;
}
- if (UicOpcode != UfsUicDmeReset) {
- Status = UfsMmioRead32 (Private, UFS_HC_UCMD_ARG2_OFFSET, &Data);
+ if (UicCommand->Opcode != UfsUicDmeReset) {
+ Status = UfsMmioRead32 (Private, UFS_HC_UCMD_ARG2_OFFSET, &UicCommand->Arg2);
if (EFI_ERROR (Status)) {
return Status;
}
- if ((Data & 0xFF) != 0) {
+ Status = UfsMmioRead32 (Private, UFS_HC_UCMD_ARG3_OFFSET, &UicCommand->Arg3);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if ((UicCommand->Arg2 & 0xFF) != 0) {
DEBUG_CODE_BEGIN();
- DumpUicCmdExecResult (UicOpcode, (UINT8)(Data & 0xFF));
+ DumpUicCmdExecResult ((UINT8)UicCommand->Opcode, (UINT8)(UicCommand->Arg2 & 0xFF));
DEBUG_CODE_END();
return EFI_DEVICE_ERROR;
}
@@ -1934,16 +1932,21 @@ UfsDeviceDetection (
IN UFS_PASS_THRU_PRIVATE_DATA *Private
)
{
- UINTN Retry;
- EFI_STATUS Status;
- UINT32 Data;
+ UINTN Retry;
+ EFI_STATUS Status;
+ UINT32 Data;
+ EDKII_UIC_COMMAND LinkStartupCommand;
//
// Start UFS device detection.
// Try up to 3 times for establishing data link with device.
//
for (Retry = 0; Retry < 3; Retry++) {
- Status = UfsExecUicCommands (Private, UfsUicDmeLinkStartup, 0, 0, 0);
+ LinkStartupCommand.Opcode = UfsUicDmeLinkStartup;
+ LinkStartupCommand.Arg1 = 0;
+ LinkStartupCommand.Arg2 = 0;
+ LinkStartupCommand.Arg3 = 0;
+ Status = UfsExecUicCommands (Private, &LinkStartupCommand);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
--
2.14.1.windows.1
--------------------------------------------------------------------
Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 | Kapital zakladowy 200.000 PLN.
Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek
przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by
others is strictly prohibited.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#45267): https://edk2.groups.io/g/devel/message/45267
Mute This Topic: https://groups.io/mt/32809844/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list