[edk2-devel] [edk2-platforms: PATCH v2 09/10] Marvell/Cn9132Db: Introduce board support
Leif Lindholm
leif.lindholm at linaro.org
Fri Aug 16 17:40:47 UTC 2019
On Thu, Aug 15, 2019 at 04:54:13AM +0200, Marcin Wojtas wrote:
> This patch introduces all necessary components required
> for building EDK2 firmware for CN9132-DB setup A. Note
> the ACPI is not yet available for this variant, due to
> the current ICU (CP1xx interrupt controller) support
> implementation.
>
> In order to build this variant, '-D CN9132' flag should be added.
> Otherwise the default (CN9130) will be compiled.
Same comment on commit message - don't forget to update if logic
changed.
> Signed-off-by: Marcin Wojtas <mw at semihalf.com>
> ---
> Platform/Marvell/Cn913xDb/Cn9132DbA.dsc.inc | 72 +++++++++++
> Platform/Marvell/Cn913xDb/Cn913xDbA.dsc | 15 ++-
> Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.inf | 29 +++++
> Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf | 22 ++++
> Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.h | 4 +
> Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.c | 135 ++++++++++++++++++++
> Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.c | 42 ++++++
> Platform/Marvell/Cn913xDb/Cn913xDbA.fdf.inc | 2 +
> Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts | 6 -
> Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dtsi | 20 ++-
> 10 files changed, 333 insertions(+), 14 deletions(-)
> create mode 100644 Platform/Marvell/Cn913xDb/Cn9132DbA.dsc.inc
> create mode 100644 Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.inf
> create mode 100644 Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf
> create mode 100644 Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.c
>
> diff --git a/Platform/Marvell/Cn913xDb/Cn9132DbA.dsc.inc b/Platform/Marvell/Cn913xDb/Cn9132DbA.dsc.inc
> new file mode 100644
> index 0000000..a0b90fa
> --- /dev/null
> +++ b/Platform/Marvell/Cn913xDb/Cn9132DbA.dsc.inc
> @@ -0,0 +1,72 @@
> +## @file
> +# Component description file for the CN9132 Development Board (variant A)
> +#
> +# Copyright (c) 2019 Marvell International Ltd.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +################################################################################
> +#
> +# Pcd Section - list of all EDK II PCD Entries defined by this Platform
> +#
> +################################################################################
> +[PcdsFixedAtBuild.common]
> + # CP115 count
> + gMarvellTokenSpaceGuid.PcdMaxCpCount|3
> +
> + # MPP
> + gMarvellTokenSpaceGuid.PcdMppChipCount|4
> +
> + # CP115 #2 MPP
> + gMarvellTokenSpaceGuid.PcdChip3MppReverseFlag|FALSE
> + gMarvellTokenSpaceGuid.PcdChip3MppBaseAddress|0xF6440000
> + gMarvellTokenSpaceGuid.PcdChip3MppPinCount|64
> + gMarvellTokenSpaceGuid.PcdChip3MppSel0|{ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
> + gMarvellTokenSpaceGuid.PcdChip3MppSel1|{ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
> + gMarvellTokenSpaceGuid.PcdChip3MppSel2|{ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x9, 0x9, 0x0 }
> + gMarvellTokenSpaceGuid.PcdChip3MppSel3|{ 0x0, 0x0, 0x8, 0x0, 0x8, 0x0, 0x0, 0x2, 0x2, 0x0 }
> + gMarvellTokenSpaceGuid.PcdChip3MppSel4|{ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
> + gMarvellTokenSpaceGuid.PcdChip3MppSel5|{ 0x0, 0x0, 0x0, 0x0, 0xA, 0xB, 0xE, 0xE, 0xE, 0xE }
> + gMarvellTokenSpaceGuid.PcdChip3MppSel6|{ 0xE, 0xE, 0xE, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
> +
> + # ComPhy
> + gMarvellTokenSpaceGuid.PcdComPhyDevices|{ 0x1, 0x1, 0x1 }
> + # ComPhy1
> + # 0: PCIE0 5 Gbps
> + # 1: PCIE0 5 Gbps
> + # 2: SATA0 5 Gbps
> + # 3: USB3_HOST1 5 Gbps
> + # 4: SFI 10.31 Gbps
> + # 5: PCIE2 5 Gbps
> + gMarvellTokenSpaceGuid.PcdChip2ComPhyTypes|{ $(CP_PCIE0), $(CP_PCIE0), $(CP_SATA0), $(CP_USB3_HOST1), $(CP_SFI), $(CP_PCIE2)}
> + gMarvellTokenSpaceGuid.PcdChip2ComPhySpeeds|{ $(CP_5G), $(CP_5G), $(CP_5G), $(CP_5G), $(CP_10_3125G), $(CP_5G) }
> +
> + # UtmiPhy
> + gMarvellTokenSpaceGuid.PcdUtmiControllersEnabled|{ 0x1, 0x1, 0x0, 0x1, 0x1, 0x1 }
> + gMarvellTokenSpaceGuid.PcdUtmiPortType|{ $(UTMI_USB_HOST0), $(UTMI_USB_HOST1), $(UTMI_USB_HOST0), $(UTMI_USB_HOST1), $(UTMI_USB_HOST0), $(UTMI_USB_HOST1) }
> +
> + # MDIO
> + gMarvellTokenSpaceGuid.PcdMdioControllersEnabled|{ 0x1, 0x0 }
> +
> + # PHY
> + gMarvellTokenSpaceGuid.PcdPhy2MdioController|{ 0x0, 0x0 }
> + gMarvellTokenSpaceGuid.PcdPhyDeviceIds|{ 0x0, 0x0 }
> + gMarvellTokenSpaceGuid.PcdPhySmiAddresses|{ 0x0, 0x1 }
> + gMarvellTokenSpaceGuid.PcdPhyStartupAutoneg|FALSE
> +
> + # NET
> + gMarvellTokenSpaceGuid.PcdPp2GopIndexes|{ 0x0, 0x2, 0x3, 0x0, 0x0 }
> + gMarvellTokenSpaceGuid.PcdPp2InterfaceAlwaysUp|{ 0x0, 0x0, 0x0, 0x0, 0x0 }
> + gMarvellTokenSpaceGuid.PcdPp2InterfaceSpeed|{ $(PHY_SPEED_10000), $(PHY_SPEED_1000), $(PHY_SPEED_1000), $(PHY_SPEED_10000), $(PHY_SPEED_10000) }
> + gMarvellTokenSpaceGuid.PcdPp2PhyConnectionTypes|{ $(PHY_SFI), $(PHY_RGMII), $(PHY_RGMII), $(PHY_SFI), $(PHY_SFI) }
> + gMarvellTokenSpaceGuid.PcdPp2PhyIndexes|{ 0xFF, 0x0, 0x1, 0xFF, 0xFF }
> + gMarvellTokenSpaceGuid.PcdPp2Port2Controller|{ 0x0, 0x0, 0x0, 0x1, 0x2 }
> + gMarvellTokenSpaceGuid.PcdPp2PortIds|{ 0x0, 0x1, 0x2, 0x0, 0x0 }
> + gMarvellTokenSpaceGuid.PcdPp2Controllers|{ 0x1, 0x1, 0x1 }
> +
> + # NonDiscoverableDevices
> + gMarvellTokenSpaceGuid.PcdPciEXhci|{ 0x1, 0x1, 0x0, 0x1, 0x1, 0x1 }
> + gMarvellTokenSpaceGuid.PcdPciEAhci|{ 0x1, 0x1, 0x1 }
> + gMarvellTokenSpaceGuid.PcdPciESdhci|{ 0x1, 0x1, 0x0, 0x1 }
> diff --git a/Platform/Marvell/Cn913xDb/Cn913xDbA.dsc b/Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
> index 5aca5a1..1b28fae 100644
> --- a/Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
> +++ b/Platform/Marvell/Cn913xDb/Cn913xDbA.dsc
> @@ -13,7 +13,9 @@
> #
> ################################################################################
> [Defines]
> -!if $(CN9131)
> +!if $(CN9132)
> + PLATFORM_NAME = Cn9132DbA
> +!elseif $(CN9131)
> PLATFORM_NAME = Cn9131DbA
> !else
> PLATFORM_NAME = Cn9130DbA
> @@ -38,16 +40,25 @@
>
> !include Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
> !include Platform/Marvell/Cn913xDb/Cn9130DbA.dsc.inc
> -!if $(CN9131)
> +!if $(CN9131) || $(CN9132)
> !include Platform/Marvell/Cn913xDb/Cn9131DbA.dsc.inc
> !endif
> +!if $(CN9132)
> +!include Platform/Marvell/Cn913xDb/Cn9132DbA.dsc.inc
> +!endif
>
> [Components.common]
> Silicon/Marvell/OcteonTx/DeviceTree/T91/$(PLATFORM_NAME).inf
>
> +!ifndef $(CN9132)
> [Components.AARCH64]
> Silicon/Marvell/OcteonTx/AcpiTables/T91/$(PLATFORM_NAME).inf
> +!endif
>
> [LibraryClasses.common]
> +!if $(CN9132)
> + ArmadaBoardDescLib|Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.inf
> +!else
> ArmadaBoardDescLib|Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9130DbABoardDescLib.inf
> +!endif
> NonDiscoverableInitLib|Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.inf
> diff --git a/Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.inf b/Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.inf
> new file mode 100644
> index 0000000..27a0214
> --- /dev/null
> +++ b/Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.inf
> @@ -0,0 +1,29 @@
> +## @file
> +#
> +# Copyright (C) 2019, Marvell International Ltd. and its affiliates<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = Cn9132DbABoardDescLib
> + FILE_GUID = cf7a0f12-45fe-417b-9c34-053605973b68
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = ArmadaBoardDescLib
> +
> +[Sources]
> + Cn9132DbABoardDescLib.c
> +
> +[Packages]
> + EmbeddedPkg/EmbeddedPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> + Silicon/Marvell/Marvell.dec
> +
> +[LibraryClasses]
> + DebugLib
> + IoLib
> diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf b/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf
> new file mode 100644
> index 0000000..c9e3b04
> --- /dev/null
> +++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/Cn9132DbA.inf
> @@ -0,0 +1,22 @@
> +## @file
> +#
> +# Device tree description of the Marvell CN9130-DB-A platform
> +#
> +# Copyright (c) 2019, Marvell International Ltd. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = Cn9132DbADeviceTree
> + FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
> + MODULE_TYPE = USER_DEFINED
> + VERSION_STRING = 1.0
> +
> +[Sources]
> + cn9132-db-A.dts
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> diff --git a/Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.h b/Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.h
> index 6618737..084bea0 100644
> --- a/Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.h
> +++ b/Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.h
> @@ -17,5 +17,9 @@
> #define CN9130_DB_SDMMC_VCCQ_PIN 15
> #define CN9131_DB_VBUS0_PIN 3
> #define CN9131_DB_VBUS0_LIMIT_PIN 2
> +#define CN9132_DB_VBUS0_PIN 2
> +#define CN9132_DB_VBUS0_LIMIT_PIN 0
> +#define CN9132_DB_VBUS1_PIN 3
> +#define CN9132_DB_VBUS1_LIMIT_PIN 1
>
> #endif
> diff --git a/Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.c b/Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.c
> new file mode 100644
> index 0000000..d2846dd
> --- /dev/null
> +++ b/Platform/Marvell/Cn913xDb/BoardDescriptionLib/Cn9132DbABoardDescLib.c
> @@ -0,0 +1,135 @@
> +/**
> +*
> +* Copyright (C) 2019, Marvell International Ltd. and its affiliates.
> +*
> +* SPDX-License-Identifier: BSD-2-Clause-Patent
> +*
> +**/
> +
> +#include <Uefi.h>
> +
> +#include <Library/ArmadaBoardDescLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/MemoryAllocationLib.h>
> +#include <Library/MvGpioLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +
> +//
> +// GPIO Expander
> +//
> +STATIC MV_GPIO_EXPANDER mGpioExpander = {
> + PCA9555_ID,
> + 0x21,
> + 0x0,
> +};
> +
> +
> +EFI_STATUS
> +EFIAPI
> +ArmadaBoardGpioExpanderGet (
> + IN OUT MV_GPIO_EXPANDER **GpioExpanders,
> + IN OUT UINTN *GpioExpanderCount
> + )
> +{
> + *GpioExpanderCount = 1;
> + *GpioExpanders = &mGpioExpander;
> +
> + return EFI_SUCCESS;
> +}
> +
> +//
> +// PCIE
> +//
> +STATIC
> +MV_PCIE_CONTROLLER mPcieController[] = {
> + { /* PCIE0 @0xF2640000 */
> + .PcieDbiAddress = 0xF2600000,
> + .ConfigSpaceAddress = 0xD0000000,
> + .HaveResetGpio = FALSE,
> + .PcieResetGpio = { 0 },
> + .PcieBusMin = 0,
> + .PcieBusMax = 0xFE,
> + .PcieIoTranslation = 0xDFF00000,
> + .PcieIoWinBase = 0x0,
> + .PcieIoWinSize = 0x10000,
> + .PcieMmio32Translation = 0,
> + .PcieMmio32WinBase = 0xC0000000,
> + .PcieMmio32WinSize = 0x10000000,
> + .PcieMmio64Translation = 0,
> + .PcieMmio64WinBase = MAX_UINT64,
> + .PcieMmio64WinSize = 0,
> + }
> +};
> +
> +/**
> + Return the number and description of PCIE controllers used on the platform.
> +
> + @param[in out] **PcieControllers Array containing PCIE controllers'
> + description.
> + @param[in out] *PcieControllerCount Amount of used PCIE controllers.
> +
> + @retval EFI_SUCCESS The data were obtained successfully.
> + @retval other Return error status.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ArmadaBoardPcieControllerGet (
> + IN OUT MV_PCIE_CONTROLLER CONST **PcieControllers,
> + IN OUT UINTN *PcieControllerCount
> + )
> +{
> + *PcieControllers = mPcieController;
> + *PcieControllerCount = ARRAY_SIZE (mPcieController);
> +
> + return EFI_SUCCESS;
> +}
> +
> +//
> +// Order of devices in SdMmcDescTemplate has to be in par with ArmadaSoCDescLib
> +//
> +STATIC
> +MV_BOARD_SDMMC_DESC mSdMmcDescTemplate[] = {
> + { /* eMMC 0xF06E0000 */
> + 0, /* SOC will be filled by MvBoardDescDxe */
> + 0, /* SdMmcDevCount will be filled by MvBoardDescDxe */
> + FALSE, /* Xenon1v8Enabled */
> + TRUE, /* Xenon8BitBusEnabled */
> + FALSE, /* XenonSlowModeEnabled */
> + 0x40, /* XenonTuningStepDivisor */
> + EmbeddedSlot /* SlotType */
> + },
> + { /* SD/MMC 0xF2780000 */
> + 0, /* SOC will be filled by MvBoardDescDxe */
> + 0, /* SdMmcDevCount will be filled by MvBoardDescDxe */
> + FALSE, /* Xenon1v8Enabled */
> + FALSE, /* Xenon8BitBusEnabled */
> + FALSE, /* XenonSlowModeEnabled */
> + 0x19, /* XenonTuningStepDivisor */
> + EmbeddedSlot /* SlotType */
> + },
> + { /* SD/MMC 0xF6780000 */
> + 0, /* SOC will be filled by MvBoardDescDxe */
> + 0, /* SdMmcDevCount will be filled by MvBoardDescDxe */
> + FALSE, /* Xenon1v8Enabled */
> + FALSE, /* Xenon8BitBusEnabled */
> + FALSE, /* XenonSlowModeEnabled */
> + 0x19, /* XenonTuningStepDivisor */
> + EmbeddedSlot /* SlotType */
> + }
> +};
> +
> +EFI_STATUS
> +EFIAPI
> +ArmadaBoardDescSdMmcGet (
> + OUT UINTN *SdMmcDevCount,
> + OUT MV_BOARD_SDMMC_DESC **SdMmcDesc
> + )
> +{
> + *SdMmcDesc = mSdMmcDescTemplate;
> + *SdMmcDevCount = ARRAY_SIZE (mSdMmcDescTemplate);
> +
> + return EFI_SUCCESS;
> +}
> diff --git a/Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.c b/Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.c
> index dded150..42dc54a 100644
> --- a/Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.c
> +++ b/Platform/Marvell/Cn913xDb/NonDiscoverableInitLib/NonDiscoverableInitLib.c
> @@ -118,6 +118,45 @@ Cp1XhciInit (
> MV_GPIO_DRIVER_TYPE_SOC_CONTROLLER);
> }
>
> +STATIC CONST MV_GPIO_PIN mCp2XhciVbusPins[] = {
> + {
> + MV_GPIO_DRIVER_TYPE_SOC_CONTROLLER,
> + MV_GPIO_CP2_CONTROLLER0,
> + CN9132_DB_VBUS0_PIN,
> + TRUE,
> + },
> + {
> + MV_GPIO_DRIVER_TYPE_SOC_CONTROLLER,
> + MV_GPIO_CP2_CONTROLLER0,
> + CN9132_DB_VBUS0_LIMIT_PIN,
> + TRUE,
> + },
> + {
> + MV_GPIO_DRIVER_TYPE_SOC_CONTROLLER,
> + MV_GPIO_CP2_CONTROLLER0,
> + CN9132_DB_VBUS1_PIN,
> + TRUE,
> + },
> + {
> + MV_GPIO_DRIVER_TYPE_SOC_CONTROLLER,
> + MV_GPIO_CP2_CONTROLLER0,
> + CN9132_DB_VBUS1_LIMIT_PIN,
> + TRUE,
> + },
> +};
> +
> +STATIC
> +EFI_STATUS
> +EFIAPI
> +Cp2XhciInit (
> + IN NON_DISCOVERABLE_DEVICE *This
> + )
> +{
> + return ConfigurePins (mCp2XhciVbusPins,
> + ARRAY_SIZE (mCp2XhciVbusPins),
> + MV_GPIO_DRIVER_TYPE_SOC_CONTROLLER);
> +}
> +
> STATIC CONST MV_GPIO_PIN mCp0SdMmcPins[] = {
> {
> MV_GPIO_DRIVER_TYPE_PCA95XX,
> @@ -159,6 +198,9 @@ NonDiscoverableDeviceInitializerGet (
> return Cp0XhciInit;
> case 2:
> return Cp1XhciInit;
> + case 3:
> + case 4:
> + return Cp2XhciInit;
> }
> }
>
> diff --git a/Platform/Marvell/Cn913xDb/Cn913xDbA.fdf.inc b/Platform/Marvell/Cn913xDb/Cn913xDbA.fdf.inc
> index 0c321d1..78bdb79 100644
> --- a/Platform/Marvell/Cn913xDb/Cn913xDbA.fdf.inc
> +++ b/Platform/Marvell/Cn913xDb/Cn913xDbA.fdf.inc
> @@ -12,7 +12,9 @@
> # DTB
> INF RuleOverride = DTB Silicon/Marvell/OcteonTx/DeviceTree/T91/$(PLATFORM_NAME).inf
>
> +!ifndef $(CN9132)
> !if $(ARCH) == AARCH64
> # ACPI support
> INF RuleOverride = ACPITABLE Silicon/Marvell/OcteonTx/AcpiTables/T91/$(PLATFORM_NAME).inf
> !endif
> +!endif
> diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts
> index e9464f8..724d7dc 100644
> --- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts
> +++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db-A.dts
> @@ -55,12 +55,6 @@
>
> &cp2_sata0 {
> status = "okay";
> - /* SLM-1521-V2, CON4 */
> - sata-port at 0 {
> - status = "okay";
> - /* Generic PHY, providing serdes lanes */
> - phys = <&cp2_comphy2 0>;
> - };
> };
>
> /* CON 2 on SLM-1683 - microSD */
> diff --git a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dtsi b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dtsi
> index 8613607..7dc6c6e 100644
> --- a/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dtsi
> +++ b/Silicon/Marvell/OcteonTx/DeviceTree/T91/cn9132-db.dtsi
Same license comment - break out and submit for edk2-non-osi?
/
Leif
> @@ -6,15 +6,23 @@
> */
>
> #undef CP110_NUM
> -#undef CP110_PCIE_MEM_SIZE
> +#undef CP110_NAME
> +#undef CP110_BASE
> +#undef CP110_PCIE0_BASE
> +#undef CP110_PCIE1_BASE
> +#undef CP110_PCIE2_BASE
> #undef CP110_PCIEx_CPU_MEM_BASE
> -#undef CP110_PCIEx_BUS_MEM_BASE
> +#undef CP110_PCIEx_MEM_BASE
>
> /* CP110-1 Settings */
> +#define CP110_NAME cp2
> #define CP110_NUM 2
> -#define CP110_PCIE_MEM_SIZE(iface) (0xf00000)
> -#define CP110_PCIEx_CPU_MEM_BASE(iface) (0xe5000000 + (iface) * 0x1000000)
> -#define CP110_PCIEx_BUS_MEM_BASE(iface) (CP110_PCIEx_CPU_MEM_BASE(iface))
> +#define CP110_BASE f6000000
> +#define CP110_PCIE0_BASE f6600000
> +#define CP110_PCIE1_BASE f6620000
> +#define CP110_PCIE2_BASE f6640000
> +#define CP110_PCIEx_CPU_MEM_BASE(iface) (0xe5000000 + (iface) * 0x1000000)
> +#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIEx_CPU_MEM_BASE(iface))
>
> #include "armada-cp110.dtsi"
>
> @@ -124,7 +132,7 @@
>
> &cp2_syscon0 {
> cp2_pinctrl: pinctrl {
> - compatible = "marvell,cp115-standalone-pinctrl";
> + compatible = "marvell,armada-7k-pinctrl";
>
> cp2_i2c0_pins: cp2-i2c-pins-0 {
> marvell,pins = "mpp37", "mpp38";
> --
> 2.7.4
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#45843): https://edk2.groups.io/g/devel/message/45843
Mute This Topic: https://groups.io/mt/32882742/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list