[edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH 07/12] PciBusDxe: Record the PCI-Express Capability Structure
Ni, Ray
ray.ni at intel.com
Tue Dec 17 12:03:32 UTC 2019
2 minor comments.
And I suggest you don't change EFI_D_xxx in this patch. Or you could change in a separate patch.
> > + PCI_CAPABILITY_PCIEXP PciExpStruct;
1. to align "Pci" which buffers the PCI config space, this can be simply "PciExp".
> > + //
> > + // For SR-IOV
> > + //
> > UINT32 AriCapabilityOffset;
> > UINT32 SrIovCapabilityOffset;
> > UINT32 MrIovCapabilityOffset;
> > diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c
> > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c
> > index c7eafff..2343702 100644
> > --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c
> > +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c
> > @@ -230,7 +230,7 @@ PciSearchDevice (
> > PciIoDevice = NULL;
> >
> > DEBUG ((
> > - EFI_D_INFO,
> > + DEBUG_INFO,
> > "PciBus: Discovered %s @ [%02x|%02x|%02x]\n",
> > IS_PCI_BRIDGE (Pci) ? L"PPB" :
> > IS_CARDBUS_BRIDGE (Pci) ? L"P2C" :
> > @@ -397,7 +397,7 @@ DumpPpbPaddingResource (
> >
> > if ((Type != PciBarTypeUnknown) && ((ResourceType == PciBarTypeUnknown)
> > || (ResourceType == Type))) {
> > DEBUG ((
> > - EFI_D_INFO,
> > + DEBUG_INFO,
> > " Padding: Type = %s; Alignment = 0x%lx;\tLength = 0x%lx\n",
> > mBarTypeStr[Type], Descriptor->AddrRangeMax, Descriptor->AddrLen
> > ));
> > @@ -424,7 +424,7 @@ DumpPciBars (
> > }
> >
> > DEBUG ((
> > - EFI_D_INFO,
> > + DEBUG_INFO,
> > " BAR[%d]: Type = %s; Alignment = 0x%lx;\tLength = 0x%lx;\tOffset =
> > 0x%02x\n",
> > Index, mBarTypeStr[MIN (PciIoDevice->PciBar[Index].BarType,
> > PciBarTypeMaxType)],
> > PciIoDevice->PciBar[Index].Alignment, PciIoDevice->PciBar[Index].Length,
> > PciIoDevice->PciBar[Index].Offset @@ -437,13 +437,13 @@ DumpPciBars (
> > }
> >
> > DEBUG ((
> > - EFI_D_INFO,
> > + DEBUG_INFO,
> > " VFBAR[%d]: Type = %s; Alignment = 0x%lx;\tLength = 0x%lx;\tOffset =
> > 0x%02x\n",
> > Index, mBarTypeStr[MIN (PciIoDevice->VfPciBar[Index].BarType,
> > PciBarTypeMaxType)],
> > PciIoDevice->VfPciBar[Index].Alignment, PciIoDevice-
> > >VfPciBar[Index].Length, PciIoDevice->VfPciBar[Index].Offset
> > ));
> > }
> > - DEBUG ((EFI_D_INFO, "\n"));
> > + DEBUG ((DEBUG_INFO, "\n"));
> > }
> >
> > /**
> > @@ -1903,7 +1903,7 @@ PciParseBar (
> > // Fix the length to support some special 64 bit BAR
> > //
> > if (Value == 0) {
> > - DEBUG ((EFI_D_INFO, "[PciBus]BAR probing for upper 32bit of MEM64 BAR
> > returns 0, change to 0xFFFFFFFF.\n"));
> > + DEBUG ((DEBUG_INFO, "[PciBus]BAR probing for upper 32bit of
> > + MEM64 BAR returns 0, change to 0xFFFFFFFF.\n"));
> > Value = (UINT32) -1;
> > } else {
> > Value |= ((UINT32)(-1) << HighBitSet32 (Value)); @@ -2153,7 +2153,17 @@
> > CreatePciIoDevice (
> > NULL
> > );
> > if (!EFI_ERROR (Status)) {
> > - PciIoDevice->IsPciExp = TRUE;
> > + PciIoDevice->IsPciExp = TRUE;
> > + //
> > + // read the PCI device's entire PCI Express Capability structure
> > + //
> > + PciIo->Pci.Read (
> > + PciIo,
> > + EfiPciIoWidthUint8,
> > + PciIoDevice->PciExpressCapabilityOffset,
> > + sizeof (PCI_CAPABILITY_PCIEXP) / sizeof (UINT8),
> > + &PciIoDevice->PciExpStruct
> > + );
2. Please follow EDKII coding style document regarding the indent.
> > }
> >
> > if (PcdGetBool (PcdAriSupport)) {
> > @@ -2206,7 +2216,7 @@ CreatePciIoDevice (
> > &Data32
> > );
> > DEBUG ((
> > - EFI_D_INFO,
> > + DEBUG_INFO,
> > " ARI: forwarding enabled for PPB[%02x:%02x:%02x]\n",
> > Bridge->BusNumber,
> > Bridge->DeviceNumber,
> > @@ -2215,7 +2225,7 @@ CreatePciIoDevice (
> > }
> > }
> >
> > - DEBUG ((EFI_D_INFO, " ARI: CapOffset = 0x%x\n", PciIoDevice-
> > >AriCapabilityOffset));
> > + DEBUG ((DEBUG_INFO, " ARI: CapOffset = 0x%x\n",
> > + PciIoDevice->AriCapabilityOffset));
> > }
> > }
> >
> > @@ -2325,12 +2335,12 @@ CreatePciIoDevice (
> > PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) -
> > Bus + 1);
> >
> > DEBUG ((
> > - EFI_D_INFO,
> > + DEBUG_INFO,
> > " SR-IOV: SupportedPageSize = 0x%x; SystemPageSize = 0x%x; FirstVFOffset
> > = 0x%x;\n",
> > SupportedPageSize, PciIoDevice->SystemPageSize >> 12, FirstVFOffset
> > ));
> > DEBUG ((
> > - EFI_D_INFO,
> > + DEBUG_INFO,
> > " InitialVFs = 0x%x; ReservedBusNum = 0x%x; CapOffset = 0x%x\n",
> > PciIoDevice->InitialVFs, PciIoDevice->ReservedBusNum, PciIoDevice-
> > >SrIovCapabilityOffset
> > ));
> > @@ -2345,7 +2355,7 @@ CreatePciIoDevice (
> > NULL
> > );
> > if (!EFI_ERROR (Status)) {
> > - DEBUG ((EFI_D_INFO, " MR-IOV: CapOffset = 0x%x\n", PciIoDevice-
> > >MrIovCapabilityOffset));
> > + DEBUG ((DEBUG_INFO, " MR-IOV: CapOffset = 0x%x\n",
> > + PciIoDevice->MrIovCapabilityOffset));
> > }
> > }
> >
> > diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.c
> > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.c
> > index 9e6671d..df9e696 100644
> > --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.c
> > +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.c
> > @@ -467,6 +467,14 @@ GetPciFeaturesConfigurationTable (
> > return EFI_SUCCESS;
> > }
> >
> > + //
> > + // The PCI features configuration table is not built for RCiEP,
> > + return NULL // if
> > + (PciDevice->PciExpStruct.Capability.Bits.DevicePortType == \
> > + PCIE_DEVICE_PORT_TYPE_ROOT_COMPLEX_INTEGRATED_ENDPOINT) {
> > + *PciFeaturesConfigTable = NULL;
> > + return EFI_SUCCESS;
> > + }
> >
> > if (IsDevicePathEnd (PciDevice->DevicePath)){
> > //
> > @@ -575,6 +583,45 @@ IsPciRootPortEmpty ( }
> >
> >
> > +/**
> > + helper routine to dump the PCIe Device Port Type **/ VOID
> > +DumpDevicePortType (
> > + IN UINT8 DevicePortType
> > + )
> > +{
> > + switch (DevicePortType){
> > + case PCIE_DEVICE_PORT_TYPE_PCIE_ENDPOINT:
> > + DEBUG (( DEBUG_INFO, "PCIe endpoint found\n"));
> > + break;
> > + case PCIE_DEVICE_PORT_TYPE_LEGACY_PCIE_ENDPOINT:
> > + DEBUG (( DEBUG_INFO, "legacy PCI endpoint found\n"));
> > + break;
> > + case PCIE_DEVICE_PORT_TYPE_ROOT_PORT:
> > + DEBUG (( DEBUG_INFO, "PCIe Root Port found\n"));
> > + break;
> > + case PCIE_DEVICE_PORT_TYPE_UPSTREAM_PORT:
> > + DEBUG (( DEBUG_INFO, "PCI switch upstream port found\n"));
> > + break;
> > + case PCIE_DEVICE_PORT_TYPE_DOWNSTREAM_PORT:
> > + DEBUG (( DEBUG_INFO, "PCI switch downstream port found\n"));
> > + break;
> > + case PCIE_DEVICE_PORT_TYPE_PCIE_TO_PCI_BRIDGE:
> > + DEBUG (( DEBUG_INFO, "PCIe-PCI bridge found\n"));
> > + break;
> > + case PCIE_DEVICE_PORT_TYPE_PCI_TO_PCIE_BRIDGE:
> > + DEBUG (( DEBUG_INFO, "PCI-PCIe bridge found\n"));
> > + break;
> > + case PCIE_DEVICE_PORT_TYPE_ROOT_COMPLEX_INTEGRATED_ENDPOINT:
> > + DEBUG (( DEBUG_INFO, "RCiEP found\n"));
> > + break;
> > + case PCIE_DEVICE_PORT_TYPE_ROOT_COMPLEX_EVENT_COLLECTOR:
> > + DEBUG (( DEBUG_INFO, "RC Event Collector found\n"));
> > + break;
> > + }
> > +}
> > +
> > /**
> > Process each PCI device as per the pltaform and device-specific policy.
> >
> > @@ -590,8 +637,12 @@ SetupDevicePciFeatures (
> > )
> > {
> > EFI_STATUS Status;
> > + PCI_REG_PCIE_CAPABILITY PcieCap;
> > OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > *OtherPciFeaturesConfigTable;
> >
> > + PcieCap.Uint16 = PciDevice->PciExpStruct.Capability.Uint16;
> > + DumpDevicePortType ((UINT8)PcieCap.Bits.DevicePortType);
> > +
> > OtherPciFeaturesConfigTable = NULL;
> > Status = GetPciFeaturesConfigurationTable (PciDevice,
> > &OtherPciFeaturesConfigTable);
> > if (EFI_ERROR( Status)) {
> > --
> > 2.21.0.windows.1
> >
> >
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#52287): https://edk2.groups.io/g/devel/message/52287
Mute This Topic: https://groups.io/mt/55161380/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list