[edk2-devel] [PATCH v1 3/4] UefiCpuPkg: Add definitions for EDKII microcode patch HOB
Wu, Hao A
hao.a.wu at intel.com
Wed Dec 25 05:42:28 UTC 2019
> -----Original Message-----
> From: Ni, Ray
> Sent: Tuesday, December 24, 2019 4:16 PM
> To: Wu, Hao A; devel at edk2.groups.io
> Cc: Dong, Eric; Laszlo Ersek; Zeng, Star; Fu, Siyuan; Kinney, Michael D
> Subject: RE: [PATCH v1 3/4] UefiCpuPkg: Add definitions for EDKII microcode
> patch HOB
>
> I suggest to let the DetectedPatchOffset points to the microcode header instead
> of microcode data.
> Consumers can use the offset to get more information from header than just
> the microcode data.
Yes.
I will handle this as well in the next version of the series.
Best Regards,
Hao Wu
>
> > -----Original Message-----
> > From: Wu, Hao A <hao.a.wu at intel.com>
> > Sent: Tuesday, December 24, 2019 9:37 AM
> > To: devel at edk2.groups.io
> > Cc: Wu, Hao A <hao.a.wu at intel.com>; Dong, Eric <eric.dong at intel.com>; Ni,
> > Ray <ray.ni at intel.com>; Laszlo Ersek <lersek at redhat.com>; Zeng, Star
> > <star.zeng at intel.com>; Fu, Siyuan <siyuan.fu at intel.com>; Kinney, Michael
> > D <michael.d.kinney at intel.com>
> > Subject: [PATCH v1 3/4] UefiCpuPkg: Add definitions for EDKII microcode
> > patch HOB
> >
> > REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
> >
> > This commit will add the definitions for EDKII microcode patch HOB.
> >
> > The intention of adding this HOB is to provide a scheme to store the below
> > information:
> >
> > A. The base address and size of the microcode patches that are being
> > loaded (from flash) into memory;
> > B. The information of applied microcode patch for each processor within
> > the system.
> >
> > The producer of the HOB will be the UefiCpuPkg/MpInitLib (where the load,
> > detect and apply of the microcode happen). The consumer of the HOB can
> > be
> > modules that want to detect/apply the microcode patch by themselves again
> > later during the boot flow.
> >
> > Cc: Eric Dong <eric.dong at intel.com>
> > Cc: Ray Ni <ray.ni at intel.com>
> > Cc: Laszlo Ersek <lersek at redhat.com>
> > Cc: Star Zeng <star.zeng at intel.com>
> > Cc: Siyuan Fu <siyuan.fu at intel.com>
> > Cc: Michael D Kinney <michael.d.kinney at intel.com>
> > Signed-off-by: Hao A Wu <hao.a.wu at intel.com>
> > ---
> > UefiCpuPkg/UefiCpuPkg.dec | 3 ++
> > UefiCpuPkg/Include/Guid/MicrocodePatchHob.h | 50
> > ++++++++++++++++++++
> > 2 files changed, 53 insertions(+)
> >
> > diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
> > index 797f948631..45b267ac61 100644
> > --- a/UefiCpuPkg/UefiCpuPkg.dec
> > +++ b/UefiCpuPkg/UefiCpuPkg.dec
> > @@ -63,6 +63,9 @@ [Guids]
> > ## Include/Guid/CpuFeaturesInitDone.h
> > gEdkiiCpuFeaturesInitDoneGuid = { 0xc77c3a41, 0x61ab, 0x4143, { 0x98,
> > 0x3e, 0x33, 0x39, 0x28, 0x6, 0x28, 0xe5 }}
> >
> > + ## Include/Guid/MicrocodePatchHob.h
> > + gEdkiiMicrocodePatchHobGuid = { 0xd178f11d, 0x8716, 0x418e, { 0xa1,
> > 0x31, 0x96, 0x7d, 0x2a, 0xc4, 0x28, 0x43 }}
> > +
> > [Protocols]
> > ## Include/Protocol/SmmCpuService.h
> > gEfiSmmCpuServiceProtocolGuid = { 0x1d202cab, 0xc8ab, 0x4d5c, { 0x94,
> > 0xf7, 0x3c, 0xfc, 0xc0, 0xd3, 0xd3, 0x35 }}
> > diff --git a/UefiCpuPkg/Include/Guid/MicrocodePatchHob.h
> > b/UefiCpuPkg/Include/Guid/MicrocodePatchHob.h
> > new file mode 100644
> > index 0000000000..3667fc3786
> > --- /dev/null
> > +++ b/UefiCpuPkg/Include/Guid/MicrocodePatchHob.h
> > @@ -0,0 +1,50 @@
> > +/** @file
> > + The microcode patch HOB is used to store the information of:
> > + A. Base address and size of the loaded microcode patches data;
> > + B. Applied microcode patch for each processor within system.
> > +
> > + Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> > + This program and the accompanying materials
> > + are licensed and made available under the terms and conditions of the BSD
> > License
> > + which accompanies this distribution. The full text of the license may be
> > found at
> > + http://opensource.org/licenses/bsd-license.php.
> > +
> > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> > BASIS,
> > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> > EXPRESS OR IMPLIED.
> > +
> > +**/
> > +
> > +#ifndef _MICROCODE_PATCH_HOB_H_
> > +#define _MICROCODE_PATCH_HOB_H_
> > +
> > +extern EFI_GUID gEdkiiMicrocodePatchHobGuid;
> > +
> > +//
> > +// The EDKII microcode patch HOB will be produced by MpInitLib and it can
> > be
> > +// consumed by modules that want to detect/apply microcode patches.
> > +//
> > +typedef struct {
> > + //
> > + // The base address of the microcode patches data after being loaded into
> > + // memory.
> > + //
> > + UINT64 MicrocodePatchAddress;
> > + //
> > + // The total size of the loaded microcode patches.
> > + //
> > + UINT64 MicrocodePatchRegionSize;
> > + //
> > + // The number of processors within the system.
> > + //
> > + UINT32 ProcessorNumber;
> > + //
> > + // An array with 'ProcessorNumber' elements that stores the offset (with
> > + // regard to 'MicrocodePatchAddress') of the applied microcode patch for
> > each
> > + // processor.
> > + // If no microcode patch is applied for certain processor, the relating
> > + // element will be set to MAX_UINT64.
> > + //
> > + UINT64 DetectedPatchOffset[0];
> > +} EDKII_MICROCODE_PATCH_HOB;
> > +
> > +#endif
> > --
> > 2.12.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#52553): https://edk2.groups.io/g/devel/message/52553
Mute This Topic: https://groups.io/mt/69242655/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list