[edk2-devel] [edk2-staging/RISC-V-V2 PATCH v3 37/39] edk2-staging:RISC-V-V2: Add RiscVEdk2Readme.md

[Leif Lindholm]

On Mon, Oct 28, 2019 at 09:59:15 +0800, Abner Chang wrote:
> Add readme of RISC-V edk2 port.
> 
> Signed-off-by: Abner Chang <abner.chang at hpe.com>
> 
> Cc: Leif Lindholm <leif.lindholm at linaro.org>
> Cc: Gilbert Chen <gilbert.chen at hpe.com>
> ---
>  RiscVEdk2Readme.md | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 64 insertions(+)
>  create mode 100644 RiscVEdk2Readme.md
> 
> diff --git a/RiscVEdk2Readme.md b/RiscVEdk2Readme.md
> new file mode 100644
> index 0000000..ebd7495
> --- /dev/null
> +++ b/RiscVEdk2Readme.md
> @@ -0,0 +1,64 @@
> +This branch is used to contribute RISC-V architecture to EDK2
> +
> +The branch owner:
> +Abner Chang < abner.chang at hpe.com >
> +Gilbert Chen < gilbert.chen at hpe.com >
> +
> +## RISC-V EDK2 Port Introduction
> +RISC-V is an open ISA which was designed to support research and education of
> +computer architecture, but now it becomes a standard open Instruction Set
> +Architecture for industry implementations. The RISC-V edk2 project is to create
> +a new processor binding in UEFI spec and have the RISC-V edk2 implementation.
> +The goal is to have RISC-V edk2 port as the firmware reference for RISC-V
> +platforms.
> +
> +This branch (RISC-V-V2) on edk2-staging is RISC-V edk2 port with RISC-V
> +OpenSbi (https://github.com/riscv/opensbi) library integrated.
> +RiscVPkg provides the generic and common modules of RISC-V prcessor.
> +Two edk2 RISC-V platforms are introduced in this branch,
> +- SiFive Freedome U500 platform whcih is maintained in FreedomU500VC707Board
> +under Platform/SiFive/U5SeriesPkg.
> +- SiFive Freedome U540 HiFive Unleashed platform whcih is maintained in
> +FreedomU540HiFiveUnleashedBoard under Platform/SiFive/U5SeriesPkg.
> +
> +Refer to Platform/SiFive/U5Series/Readme.md on edk2-platform repository.
> +
> +## RISC-V EDK2 Package
> +```
> +RiscVPkg       - RISC-V processor package. This package provides RISC-V
> +                 processor related protocols/libraries accroding to UEFI
> +                 specification and edk2 implementations.
> +RiscVPlatformPkg  - RISC-V platform package. This package provides RISC-V
> +                    platform common modules, libraries, PCDs and definitoins.
> +```
> +## Toolchain of RISC-V EDK2 port
> +Due to not yet tracked down bugs, only the following toolchain is known to
> +produce bootoable binaries.

Was this issue also resolved by Mark's linker script patch?

> +https://github.com/riscv/riscv-gnu-toolchain at commit ID 64879b24.
> +The commit ID 64879b24 of riscv-gnu-toolchain repository is verified to build
> +RISC-V edk2 platform and boot to EFI SHELL successfully.
> +You have to clone the toolchain from above link and check out commit:64879b24
> +for building RISC-V edk2 port.
> +The commit later than 64879b24 causes system hangs at the PEI phase to DXE phase
> +transition. We are still figuring out the root cause.
> +
> +## EDK2 Build Target
> +"RISCV64" ARCH is the RISC-V architecture which currently supported and verified.
> +The verified RISC-V toolchain is https://github.com/riscv/riscv-gnu-toolchain
> + at 64879b24 as mentioned above, toolchain tag is "GCC5" which is declared in
> +tools_def.txt.

If this text is still needed:
Which environment has this toolchain successfully been built in?

/
    Leif

> +Below is the edk2 build options for building RISC-V RV64 platform,
> +```
> +build -a RISCV64 -p Platform/{Vendor}/{Platform}/{Platform}.dsc -t GCC5
> +```
> +For example,
> +```
> +build -a RISCV64 -p Platform/SiFive/U5SeriesPkg/FreedomU500VC707Board/U500.dsc
> +-t GCC5
> +```
> +
> +Make sure RISC-V toolchain is built succesfully and the toolchain binaries are
> +generated in somewhere you specified when building toolchain.
> +'GCC5_RISCV64_PREFIX' is the cross compilation prefix to toolchain binraries.
> +For example, set 'GCC5_RISCV64_PREFIX' to '~/RiscVToolchain/riscv64-unknown-elf-'
> +before you build RISC-V edk2 port.
> -- 
> 2.7.4
> 

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#51103): https://edk2.groups.io/g/devel/message/51103
Mute This Topic: https://groups.io/mt/38757597/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-