[edk2-devel] [edk2-platforms][PATCH v2 5/5] Platform/RPi3/PlatformSmbiosDxe: Derive RAM size from board revision

Leif Lindholm leif.lindholm at linaro.org
Thu Oct 10 09:03:06 UTC 2019


On Tue, Oct 08, 2019 at 01:38:41PM +0100, Pete Batard wrote:
> The board revision is the proper channel to use to detect the amount of
> RAM available as bits [20-22] report the effective RAM size for the board
> starting with 256 MB (000b) and doubling in size for each value.
> 
> Signed-off-by: Pete Batard <pete at akeo.ie>

Reviewed-by: Leif Lindholm <leif.lindholm at linaro.org>

> ---
>  Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c | 18 ++++++++++++------
>  1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c b/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
> index 66ffadd0cade..540e3fd61f25 100644
> --- a/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
> +++ b/Platform/RaspberryPi/RPi3/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe.c
> @@ -863,16 +863,22 @@ MemArrMapInfoUpdateSmbiosType19 (
>    )
>  {
>    EFI_STATUS Status;
> -  UINT32 Base;
> -  UINT32 Size;
> +  UINT32 BoardRevision = 0;
>  
> -  Status = mFwProtocol->GetArmMem (&Base, &Size);
> +  // Note: Type 19 addresses are expressed in KB, not bytes
> +  mMemArrMapInfoType19.StartingAddress = 0;
> +  // The minimum RAM size used on any Raspberry Pi model is 256 MB
> +  mMemArrMapInfoType19.EndingAddress = 256 * 1024;
> +  Status = mFwProtocol->GetModelRevision (&BoardRevision);
>    if (Status != EFI_SUCCESS) {
> -    DEBUG ((DEBUG_ERROR, "Couldn't get the ARM memory size: %r\n", Status));
> +    DEBUG ((DEBUG_WARNING, "Couldn't get the board memory size - defaulting to 256 MB: %r\n", Status));
>    } else {
> -    mMemArrMapInfoType19.StartingAddress = Base / 1024;
> -    mMemArrMapInfoType19.EndingAddress = (Base + Size - 1) / 1024;
> +    // www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
> +    // Bits [20-22] indicate the amount of memory starting with 256MB (000b)
> +    // and doubling in size for each value (001b = 512 MB, 010b = 1GB, etc.)
> +    mMemArrMapInfoType19.EndingAddress <<= (BoardRevision >> 20) & 0x07;
>    }
> +  mMemArrMapInfoType19.EndingAddress -= 1;
>  
>    LogSmbiosData ((EFI_SMBIOS_TABLE_HEADER*)&mMemArrMapInfoType19, mMemArrMapInfoType19Strings, NULL);
>  }
> -- 
> 2.21.0.windows.1
> 

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#48716): https://edk2.groups.io/g/devel/message/48716
Mute This Topic: https://groups.io/mt/34441820/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-




More information about the edk2-devel-archive mailing list