[edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH] PciBusDxe: New PCI features Max_Payload_Size, Max_Read_Req_Size
Ni, Ray
ray.ni at intel.com
Mon Oct 21 05:35:09 UTC 2019
+ Liming.
> -----Original Message-----
> From: Javeed, Ashraf <ashraf.javeed at intel.com>
> Sent: Thursday, October 17, 2019 10:45 PM
> To: devel at edk2.groups.io; Javeed, Ashraf <ashraf.javeed at intel.com>; Ni,
> Ray <ray.ni at intel.com>
> Cc: Wang, Jian J <jian.j.wang at intel.com>; Wu, Hao A <hao.a.wu at intel.com>
> Subject: RE: [edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH]
> PciBusDxe: New PCI features Max_Payload_Size, Max_Read_Req_Size
>
> Can anyone point me to the documentation on how to use this ECC tool?
> Thanks
> Ashraf
>
> > -----Original Message-----
> > From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of
> Javeed,
> > Ashraf
> > Sent: Tuesday, October 15, 2019 3:47 PM
> > To: Ni, Ray <ray.ni at intel.com>; 'devel at edk2.groups.io'
> > <devel at edk2.groups.io>
> > Cc: Wang, Jian J <jian.j.wang at intel.com>; Wu, Hao A <hao.a.wu at intel.com>
> > Subject: Re: [edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH]
> > PciBusDxe: New PCI features Max_Payload_Size, Max_Read_Req_Size
> >
> >
> >
> > > -----Original Message-----
> > > From: Ni, Ray <ray.ni at intel.com>
> > > Sent: Tuesday, October 15, 2019 3:19 PM
> > > To: Javeed, Ashraf <ashraf.javeed at intel.com>; 'devel at edk2.groups.io'
> > > <devel at edk2.groups.io>
> > > Cc: Wang, Jian J <jian.j.wang at intel.com>; Wu, Hao A
> <hao.a.wu at intel.com>
> > > Subject: RE: [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH] PciBusDxe:
> New PCI
> > > features Max_Payload_Size, Max_Read_Req_Size
> > >
> > > > > > > 1. IsPciRootPortEmpty(): can you just check whether PciDevice-
> > > > >ChildList is
> > > > > > > empty by using IsListEmpty (&PciDevice->ChildList)?
> > > > > > OK, will do the additional check.
> > > > >
> > > > > Can that be the only check?
> > > > It cannot be the only check when I am parsing the list as it is going to
> loop
> > > > over; or may be where exactly you want to have this check? I
> understand it
> > > > can be the first check before traversing the list.
> > >
> > > My idea is:
> > > BOOLEAN
> > > IsPciRootPortEmpty(PciIoDevice) {
> > > Return IsListEmpty (&PciIoDevice->ChildLIst);
> > > }
> > >
> > OK, got it, will do. Thanks!
> >
> > > >
> > > > >
> > > > > >
> > > > > > > 2. Can you point to me which spec requires the MPS to be 128 for
> > > > empty
> > > > > > root
> > > > > > > ports?
> > > > > > Refer the PCI Express Base Specification Revision 5, chapter 7.5.3.4
> > > > > > Implementation Notes section.
> > > > > Can you please paste the specific wording that supports the logic to
> > > > program
> > > > > MPS to 128B for empty root ports?
> > > > > Below wording seems to require 128B only for special OSes that don't
> > > > support
> > > > > PCIE.
> > > > > " For example, if the operating system environment does not
> comprehend
> > > > PCI
> > > > > Express, firmware probably should
> > > > > not program a non-default Max_Payload_Size for a hierarchy that
> supports
> > > > Hot-
> > > > > Plug operations"
> > > > Yes; since the PCI Bus driver does not know what OS it is going to boot
> to, it
> > > > has to assume for the worst and set it to default, or leave it to default
> as the
> > > > HW default is set to 128B. Besides, the Max_Payload_Size is for the
> Data
> > > > Packet size, since the PCI RP is empty there is no point changing to any
> other
> > > > value as there won't be any PCI transactions.
> > >
> > > Agree.
> > >
> > > >
> > > > >
> > > > > >
> > > > > > > 3. GetPciRootPortBusAssigned() is dangerous because it assumes
> the
> > > > input
> > > > > > > PciDevice points to the bridge.
> > > > > > Good catch! Will make the right change.
> > > > >
> > > > > As we discussed over phone, using device path can eliminate the
> needs of
> > > > > comparing bus number. Then this function is not needed.
> > > > Yes, I am looking towards that direction.
> > >
> > > Thanks.
> > >
> > > >
> > > > >
> > > > > >
> > > > > > > 4. RecordPciRootPortBridges() could be simplified to just collect all
> > > > > > PciDevice
> > > > > > > instances who:
> > > > > > > a. belongs to the linked list of the root bridge
> > > > > > > b. is a bridge
> > > > > > I can see if I can optimize further, but do note that I need to align
> the PCI
> > > > > > feature Max_Payload_Size and Max_Read_Request_Size among all
> the
> > > > child
> > > > > > PCI devices of the Root Port (RP) in the Root Complex (RC) and since
> a
> > > > single
> > > > > > RC is known to have multiple RP I need to maintain the list of all the
> > > > primary
> > > > > > RP in the Root Bridge handle so that each primary RP can have its
> PCI
> > > > > > configuration table to track the Max_Payload_Size and
> > > > > > Max_Read_Request_Size that needs to be assigned to all its child
> PCI
> > > > devices
> > > > > > in the tree.
> > > > >
> > > > > I am not suggesting to stop collecting all root ports.
> > > > > Can you simplify the logic of RecordPciRootPortBridges() as below?
> > > > > for each node in PciRootBridge.ChildList:
> > > > > if (!IsListEmpty (node.ChildList)) {
> > > > > RootPortList.add (node)
> > > > OK, will do.
> > >
> > > Thanks.
> > >
> > > >
> > > > >
> > > > > > > > 2. GetPciPlatformProtocol(): better to rename to
> InitializePciPlatform
> > > > ().
> > > > > > To me, the word "Initialize" would mean also installing the PCI
> Platform
> > > > > > Protocol which is not the case with the PCI Bus driver; since it only
> > fetches
> > > > > > the existing protocol already installed by the platform...
> > > > > I agree with your concern : )
> > > > > But "Get" means to return the PciPlatform protocol back through
> function
> > > > return
> > > > > result.
> > > > > How about "Locate"?
> > > > Ok, will use this key word.
> > >
> > > Thanks.
> > >
> > > >
> > > > >
> > > > > >
> > > > > > > > 3. Why the type cast is needed in below code? If it is because
> > > > > > PciPlatform2
> > > > > > > > protocol reuses the prototype of GetPciRom defined for
> PciPlatform
> > > > > > protocol,
> > > > > > > > I suggest you define GetPciRom for PciPlatform2. Type
> redefinition
> > > > > > seems a
> > > > > > > > duplication. But below type-cast is more annoyed.
> > > > > > > >
> > > > > > > > Status = mPciPlatformProtocol2->GetPciRom (
> > > > > > > >
> > > > > > > (EFI_PCI_PLATFORM_PROTOCOL*)mPciPlatformProtocol2,
> > > > > > > > PciIoDevice->Handle,
> > > > > > > > &PlatformOpRomBuffer,
> > > > > > > > &PlatformOpRomSize
> > > > > > > > );
> > > > > > > >
> > > > > > Yes, the PciPlatform2.h which I had submitted to the edk2-staging
> branch
> > > > > > previously; includes the PciPlatform.h during compilation. Even I
> was
> > > > thinking
> > > > > > the same and since the new definition of the PCI Platform Protocol
> has to
> > > > > > used in future; I can port the legacy definitions into the new
> definition
> > > > source
> > > > > > file itself to avoid further change in future.
> > > > >
> > > > > Thanks.
> > > > >
> > > > > >
> > > > > > > > 4. Please run ECC tool and fix all coding style issue
> > > > > > I thought the ECC tool is used once the changes are submitted into
> the
> > > > > > Gerritt by the maintainer; it is good if I can use it offline; please let
> me
> > > > know
> > > > > > where to get this tool.
> > > > >
> > > > > The tool is inside BaseTools\BinWrappers\WindowsLike\Ecc.bat.
> > > > Thanks! Will use this. By the way; I did make the code changes by
> referring
> > > > the "EDK-II C Coding Style Standards Specification".
> > >
> > > I saw several coding style issues so I asked you to run the tool.
> > > e.g.:
> > > 1. "if (!Pointer)" should be "if (Pointer != NULL)"
> > I agree with this; since it was defined in many other places I thought this is
> the
> > standard here. I shall make the suggested changes to my new code added.
> >
> > > 2. "Function ( parameter);" should be "Function (parameter);" // no
> space
> > before
> > > 1st parameter
> > OK, will adopt to this. I had done as per the Server platform firmware style
> as I
> > understand.
> >
> > > 3. "if (...) <\n> {" should be "if (...) {" // no new-line before "{"
> > OK, will fix this, along with the ECC tool requirements.
> >
> > >
> > >
> > > >
> > > > >
> > > > > >
> > > > > > > > 5. I don't quite understand what *primary* PCI root port is. So I
> don't
> > > > > > quite
> > > > > > > > understand what RecordPciRootPortBridges() does.
> > > > > > I used the word primary for the PCI Root port to indicate the first
> level
> > > > Root
> > > > > > port in the RC of the host; there can be multiple first level PCI RP in
> the
> > > > Root
> > > > > > Bridge handle and each RP can have its downstream hierarchy which
> in
> > > > turn
> > > > > > can be the PCIe-PCIe/PCI/PCI-X bridge devices and its endpoint
> devices.
> > > > > > Since the RP and its downstream PCI bridges both have the same
> PCI
> > > > Type 1
> > > > > > PCI Configuration header, I have to maintain the list of first level RP
> of
> > the
> > > > > > Root Bridge handle.
> > > > > >
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Ray
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Javeed, Ashraf <ashraf.javeed at intel.com>
> > > > > > > > > Sent: Monday, September 23, 2019 10:21 PM
> > > > > > > > > To: devel at edk2.groups.io
> > > > > > > > > Cc: Wang, Jian J <jian.j.wang at intel.com>; Wu, Hao A
> > > > > > > > <hao.a.wu at intel.com>;
> > > > > > > > > Ni, Ray <ray.ni at intel.com>
> > > > > > > > > Subject: [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH]
> PciBusDxe:
> > > > New
> > > > > > PCI
> > > > > > > > > features Max_Payload_Size, Max_Read_Req_Size
> > > > > > > > >
> > > > > > > > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2194
> > > > > > > > >
> > > > > > > > > The EDK2 Kernel PciBusDxe driver is enhanced to enable the
> > > > > > configuration
> > > > > > > > > of PCI features like Max_Payload_Size and
> Max_Read_Req_Size.
> > > > > > > > >
> > > > > > > > > Max_Payload_Size:- The PCI Device Control register provides
> this
> > > > > > feature
> > > > > > > > > register field which controls the maximum data packet (TLP)
> size
> > > > that a
> > > > > > > > > PCI device should maintain as a requester. The PCI Bus driver is
> > > > > > required
> > > > > > > > > to maintain a highest common value supported by all the PCI
> > > > devices in
> > > > > > a
> > > > > > > > > PCIe hierarchy, especially in case of isochronous applications.
> > > > > > > > >
> > > > > > > > > Max_Read_Req_Size:- The PCI Device Control register
> provides this
> > > > > > > > feature
> > > > > > > > > register field which controls the maximum memory read
> request
> > > > size
> > > > > > that a
> > > > > > > > > PCI device should maintain as a requester. The PCI Bus driver is
> > > > > > required
> > > > > > > > > to maintain a common value, same as Max_Payload_Size, in
> case of
> > > > > > > > > isochronous applications only; or else, it should maintain the
> user
> > > > > > > > > requested value uniformly in a PCIe hierarchy (PCI root port
> and its
> > > > > > > > > downstream devices).
> > > > > > > > >
> > > > > > > > > The PCI Base Specification 4 Revision 1 contains detailed
> > information
> > > > > > > > > about these features. The EDK2 PCI Bus driver needs to enable
> the
> > > > > > > > > configuration of these features as per the PCI Base
> specification.
> > > > > > > > >
> > > > > > > > > The EDK2 PCI Bus driver also needs to take the PCI device-
> specific
> > > > > > > > > platform policy into the consideration while programming
> these
> > > > > > features;
> > > > > > > > > thus the code changes to support these, is explicitly
> dependent on
> > > > the
> > > > > > > > > new PCI Platform Protocol interface definition defined in the
> below
> > > > > > > > > record:-
> > > > > > > > > https://bugzilla.tianocore.org/show_bug.cgi?id=1954
> > > > > > > > >
> > > > > > > > > Signed-off-by: Ashraf Javeed <ashraf.javeed at intel.com>
> > > > > > > > > Cc: Jian J Wang <jian.j.wang at intel.com>
> > > > > > > > > Cc: Hao A Wu <hao.a.wu at intel.com>
> > > > > > > > > Cc: Ray Ni <ray.ni at intel.com>
> > > > > > > > > ---
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c | 23 ++--
> ------
> > > > ----
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h | 14
> > > > ++++++++-
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf | 9
> +++++-
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c |
> 229
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > > ++++++++++++++++++++++++++++-------------------------------
> -------
> > > > ----
> > > > > > -----
> > > > > > > > -
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c |
> 139
> > > > > > > > > ++++++++++++++++++++--------------------------------------------
> -------
> > > > ----
> > > > > > ----
> > > > > > > > ---
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c
> | 34
> > > > > > > > > ++++++++++++--------
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.c |
> 1601
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > > +++++++++
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.h |
> 201
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > > ++
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciPlatformSupport.c |
> 565
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > > +++++++++++++++++++++++++++++++++++++++++
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciPlatformSupport.h |
> 193
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > >
> > > > > >
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > > > MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c |
> 15
> > > > +-----
> > > > > > ---
> > > > > > > > > MdeModulePkg/MdeModulePkg.dec | 10
> ++++++
> > > > > > > > > 12 files changed, 2797 insertions(+), 236 deletions(-)
> > > > > > > > >
> > > > > > > > > diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c
> > > > > > > > > index b020ce50ce..2503b298f4 100644
> > > > > > > > > --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c
> > > > > > > > > +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c
> > > > > > > > > @@ -8,7 +8,7 @@
> > > > > > > > > PCI Root Bridges. So it means platform needs install PCI Root
> > > > Bridge IO
> > > > > > > > > protocol for each
> > > > > > > > >
> > > > > > > > > PCI Root Bus and install PCI Host Bridge Resource Allocation
> > > > Protocol.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > -Copyright (c) 2006 - 2018, Intel Corporation. All rights
> > reserved.<BR>
> > > > > > > > >
> > > > > > > > > +Copyright (c) 2006 - 2019, Intel Corporation. All rights
> > reserved.<BR>
> > > > > > > > >
> > > > > > > > > SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > **/
> > > > > > > > >
> > > > > > > > > @@ -34,8 +34,6 @@ BOOLEAN
> > > gFullEnumeration
> > > > > =
> > > > > > > > TRUE;
> > > > > > > > > UINT64 gAllOne =
> > > > 0xFFFFFFFFFFFFFFFFULL;
> > > > > > > > >
> > > > > > > > > UINT64 gAllZero = 0;
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > -EFI_PCI_PLATFORM_PROTOCOL
> *gPciPlatformProtocol;
> > > > > > > > >
> > > > > > > > > -EFI_PCI_OVERRIDE_PROTOCOL
> *gPciOverrideProtocol;
> > > > > > > > >
> > > > > > > > > EDKII_IOMMU_PROTOCOL *mIoMmuProtocol;
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > @@ -266,24 +264,7 @@ PciBusDriverBindingStart (
> > > > > > > > > // If PCI Platform protocol is available, get it now.
> > > > > > > > >
> > > > > > > > > // If the platform implements this, it must be installed before
> BDS
> > > > > > phase
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol = NULL;
> > > > > > > > >
> > > > > > > > > - gBS->LocateProtocol (
> > > > > > > > >
> > > > > > > > > - &gEfiPciPlatformProtocolGuid,
> > > > > > > > >
> > > > > > > > > - NULL,
> > > > > > > > >
> > > > > > > > > - (VOID **) &gPciPlatformProtocol
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // If PCI Platform protocol doesn't exist, try to Pci Override
> > > > Protocol.
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - if (gPciPlatformProtocol == NULL) {
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol = NULL;
> > > > > > > > >
> > > > > > > > > - gBS->LocateProtocol (
> > > > > > > > >
> > > > > > > > > - &gEfiPciOverrideProtocolGuid,
> > > > > > > > >
> > > > > > > > > - NULL,
> > > > > > > > >
> > > > > > > > > - (VOID **) &gPciOverrideProtocol
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - }
> > > > > > > > >
> > > > > > > > > + GetPciPlatformProtocol ();
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > if (mIoMmuProtocol == NULL) {
> > > > > > > > >
> > > > > > > > > gBS->LocateProtocol (
> > > > > > > > >
> > > > > > > > > diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h
> > > > > > > > > index 504a1b1c12..7955bf8a26 100644
> > > > > > > > > --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h
> > > > > > > > > +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h
> > > > > > > > > @@ -27,6 +27,8 @@ SPDX-License-Identifier: BSD-2-Clause-
> Patent
> > > > > > > > > #include <Protocol/PciOverride.h>
> > > > > > > > >
> > > > > > > > > #include <Protocol/PciEnumerationComplete.h>
> > > > > > > > >
> > > > > > > > > #include <Protocol/IoMmu.h>
> > > > > > > > >
> > > > > > > > > +#include <Protocol/PciPlatform2.h>
> > > > > > > > >
> > > > > > > > > +#include <Protocol/PciOverride2.h>
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > #include <Library/DebugLib.h>
> > > > > > > > >
> > > > > > > > > #include <Library/UefiDriverEntryPoint.h>
> > > > > > > > >
> > > > > > > > > @@ -79,6 +81,7 @@ typedef enum {
> > > > > > > > > #include "PciPowerManagement.h"
> > > > > > > > >
> > > > > > > > > #include "PciHotPlugSupport.h"
> > > > > > > > >
> > > > > > > > > #include "PciLib.h"
> > > > > > > > >
> > > > > > > > > +#include "PciFeatureSupport.h"
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > #define VGABASE1 0x3B0
> > > > > > > > >
> > > > > > > > > #define VGALIMIT1 0x3BB
> > > > > > > > >
> > > > > > > > > @@ -263,9 +266,13 @@ struct _PCI_IO_DEVICE {
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > BOOLEAN IsPciExp;
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > - // For SR-IOV
> > > > > > > > >
> > > > > > > > > + // For PCI Express Capability List Structure
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > UINT8 PciExpressCapabilityOffset;
> > > > > > > > >
> > > > > > > > > + PCI_CAPABILITY_PCIEXP PciExpStruct;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // For SR-IOV
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > UINT32 AriCapabilityOffset;
> > > > > > > > >
> > > > > > > > > UINT32 SrIovCapabilityOffset;
> > > > > > > > >
> > > > > > > > > UINT32 MrIovCapabilityOffset;
> > > > > > > > >
> > > > > > > > > @@ -279,6 +286,11 @@ struct _PCI_IO_DEVICE {
> > > > > > > > > // This field is used to support this case.
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > UINT16 BridgeIoAlignment;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Other PCI features setup flags
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + UINT8 SetupMPS;
> > > > > > > > >
> > > > > > > > > + UINT8 SetupMRRS;
> > > > > > > > >
> > > > > > > > > };
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > #define PCI_IO_DEVICE_FROM_PCI_IO_THIS(a) \
> > > > > > > > >
> > > > > > > > > diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> > > > > > > > > index 05c22025b8..13768d7ded 100644
> > > > > > > > > --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> > > > > > > > > +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> > > > > > > > > @@ -2,7 +2,7 @@
> > > > > > > > > # The PCI bus driver will probe all PCI devices and allocate
> MMIO
> > > > and
> > > > > > IO
> > > > > > > > > space for these devices.
> > > > > > > > >
> > > > > > > > > # Please use PCD feature flag
> PcdPciBusHotplugDeviceSupport to
> > > > > > enable
> > > > > > > > > hot plug supporting.
> > > > > > > > >
> > > > > > > > > #
> > > > > > > > >
> > > > > > > > > -# Copyright (c) 2006 - 2018, Intel Corporation. All rights
> > > > reserved.<BR>
> > > > > > > > >
> > > > > > > > > +# Copyright (c) 2006 - 2019, Intel Corporation. All rights
> > > > reserved.<BR>
> > > > > > > > >
> > > > > > > > > #
> > > > > > > > >
> > > > > > > > > # SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > > > > > >
> > > > > > > > > #
> > > > > > > > >
> > > > > > > > > @@ -57,6 +57,10 @@
> > > > > > > > > PciCommand.h
> > > > > > > > >
> > > > > > > > > PciIo.h
> > > > > > > > >
> > > > > > > > > PciBus.h
> > > > > > > > >
> > > > > > > > > + PciFeatureSupport.c
> > > > > > > > >
> > > > > > > > > + PciFeatureSupport.h
> > > > > > > > >
> > > > > > > > > + PciPlatformSupport.c
> > > > > > > > >
> > > > > > > > > + PciPlatformSupport.h
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > [Packages]
> > > > > > > > >
> > > > > > > > > MdePkg/MdePkg.dec
> > > > > > > > >
> > > > > > > > > @@ -91,6 +95,8 @@
> > > > > > > > > gEfiLoadFile2ProtocolGuid ##
> > SOMETIMES_PRODUCES
> > > > > > > > >
> > > > > > > > > gEdkiiIoMmuProtocolGuid ##
> > > > SOMETIMES_CONSUMES
> > > > > > > > >
> > > > > > > > > gEfiLoadedImageDevicePathProtocolGuid ##
> CONSUMES
> > > > > > > > >
> > > > > > > > > + gEfiPciPlatformProtocol2Guid ##
> > > > SOMETIMES_CONSUMES
> > > > > > > > >
> > > > > > > > > + gEfiPciOverrideProtocol2Guid ##
> > > > SOMETIMES_CONSUMES
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > [FeaturePcd]
> > > > > > > > >
> > > > > > > > >
> > > > gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport
> > > > > > > > ##
> > > > > > > > > CONSUMES
> > > > > > > > >
> > > > > > > > > @@ -104,6 +110,7 @@
> > > > > > > > > gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport
> ##
> > > > > > > > CONSUMES
> > > > > > > > >
> > > > > > > > > gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport
> ##
> > > > > > > > > CONSUMES
> > > > > > > > >
> > > > > > > > >
> > > > gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration
> > > > > > ##
> > > > > > > > > SOMETIMES_CONSUMES
> > > > > > > > >
> > > > > > > > > + gEfiMdeModulePkgTokenSpaceGuid.PcdOtherPciFeatures
> > > > > > ##
> > > > > > > > > CONSUMES
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > [UserExtensions.TianoCore."ExtraFiles"]
> > > > > > > > >
> > > > > > > > > PciBusDxeExtra.uni
> > > > > > > > >
> > > > > > > > > diff --git
> a/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
> > > > > > > > > index b7832c6970..0f76ab1cd5 100644
> > > > > > > > > --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
> > > > > > > > > +++
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
> > > > > > > > > @@ -170,6 +170,8 @@ DestroyRootBridgeByHandle (
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > if (Temp->Handle == Controller) {
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > + DestroyRootBridgePciFeaturesConfigCompletionList
> ( Temp);
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > RemoveEntryList (CurrentLink);
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > DestroyPciDeviceTree (Temp);
> > > > > > > > >
> > > > > > > > > @@ -208,8 +210,6 @@ RegisterPciDevice (
> > > > > > > > > )
> > > > > > > > >
> > > > > > > > > {
> > > > > > > > >
> > > > > > > > > EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > - VOID *PlatformOpRomBuffer;
> > > > > > > > >
> > > > > > > > > - UINTN PlatformOpRomSize;
> > > > > > > > >
> > > > > > > > > EFI_PCI_IO_PROTOCOL *PciIo;
> > > > > > > > >
> > > > > > > > > UINT8 Data8;
> > > > > > > > >
> > > > > > > > > BOOLEAN HasEfiImage;
> > > > > > > > >
> > > > > > > > > @@ -244,49 +244,13 @@ RegisterPciDevice (
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > // Get the OpRom provided by platform
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > - if (gPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > - Status = gPciPlatformProtocol->GetPciRom (
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > - PciIoDevice->Handle,
> > > > > > > > >
> > > > > > > > > - &PlatformOpRomBuffer,
> > > > > > > > >
> > > > > > > > > - &PlatformOpRomSize
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - if (!EFI_ERROR (Status)) {
> > > > > > > > >
> > > > > > > > > - PciIoDevice->EmbeddedRom = FALSE;
> > > > > > > > >
> > > > > > > > > - PciIoDevice->RomSize = (UINT32) PlatformOpRomSize;
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.RomSize = PlatformOpRomSize;
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.RomImage = PlatformOpRomBuffer;
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // For OpROM read from gPciPlatformProtocol:
> > > > > > > > >
> > > > > > > > > - // Add the Rom Image to internal database for later PCI
> light
> > > > > > > > > enumeration
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - PciRomAddImageMapping (
> > > > > > > > >
> > > > > > > > > - NULL,
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciRootBridgeIo->SegmentNumber,
> > > > > > > > >
> > > > > > > > > - PciIoDevice->BusNumber,
> > > > > > > > >
> > > > > > > > > - PciIoDevice->DeviceNumber,
> > > > > > > > >
> > > > > > > > > - PciIoDevice->FunctionNumber,
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.RomImage,
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.RomSize
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - }
> > > > > > > > >
> > > > > > > > > - } else if (gPciOverrideProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > - Status = gPciOverrideProtocol->GetPciRom (
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > - PciIoDevice->Handle,
> > > > > > > > >
> > > > > > > > > - &PlatformOpRomBuffer,
> > > > > > > > >
> > > > > > > > > - &PlatformOpRomSize
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - if (!EFI_ERROR (Status)) {
> > > > > > > > >
> > > > > > > > > - PciIoDevice->EmbeddedRom = FALSE;
> > > > > > > > >
> > > > > > > > > - PciIoDevice->RomSize = (UINT32) PlatformOpRomSize;
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.RomSize = PlatformOpRomSize;
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.RomImage = PlatformOpRomBuffer;
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // For OpROM read from gPciOverrideProtocol:
> > > > > > > > >
> > > > > > > > > - // Add the Rom Image to internal database for later PCI
> light
> > > > > > > > > enumeration
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - PciRomAddImageMapping (
> > > > > > > > >
> > > > > > > > > + Status = GetPlatformPciOptionRom ( Controller,
> PciIoDevice);
> > > > > > > > >
> > > > > > > > > + if (!EFI_ERROR (Status)) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // For OpROM read from the PCI Platform Protocol:
> > > > > > > > >
> > > > > > > > > + // Add the Rom Image to internal database for later PCI
> light
> > > > > > > > > enumeration
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciRomAddImageMapping (
> > > > > > > > >
> > > > > > > > > NULL,
> > > > > > > > >
> > > > > > > > > PciIoDevice->PciRootBridgeIo->SegmentNumber,
> > > > > > > > >
> > > > > > > > > PciIoDevice->BusNumber,
> > > > > > > > >
> > > > > > > > > @@ -294,8 +258,7 @@ RegisterPciDevice (
> > > > > > > > > PciIoDevice->FunctionNumber,
> > > > > > > > >
> > > > > > > > > PciIoDevice->PciIo.RomImage,
> > > > > > > > >
> > > > > > > > > PciIoDevice->PciIo.RomSize
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - }
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > @@ -597,7 +560,7 @@ DeRegisterPciDevice (
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > /**
> > > > > > > > >
> > > > > > > > > - Start to manage the PCI device on the specified root bridge
> or
> > PCI-
> > > > PCI
> > > > > > > > > Bridge.
> > > > > > > > >
> > > > > > > > > + Start the PCI root Ports or PCI-PCI Bridge only.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > @param Controller The root bridge handle.
> > > > > > > > >
> > > > > > > > > @param RootBridge A pointer to the PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > @@ -612,7 +575,82 @@ DeRegisterPciDevice (
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > **/
> > > > > > > > >
> > > > > > > > > EFI_STATUS
> > > > > > > > >
> > > > > > > > > -StartPciDevicesOnBridge (
> > > > > > > > >
> > > > > > > > > +StartPciRootPortsOnBridge (
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE Controller,
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + PCI_IO_DEVICE *PciIoDevice;
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *CurrentLink;
> > > > > > > > >
> > > > > > > > > + UINT64 Supports;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + PciIoDevice = NULL;
> > > > > > > > >
> > > > > > > > > + CurrentLink = RootBridge->ChildList.ForwardLink;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + while (CurrentLink != NULL && CurrentLink != &RootBridge-
> > > > >ChildList)
> > > > > > {
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + PciIoDevice = PCI_IO_DEVICE_FROM_LINK (CurrentLink);
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // check if the device has been assigned with required
> resource
> > > > > > > > >
> > > > > > > > > + // and registered
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if (!PciIoDevice->Registered && !PciIoDevice->Allocated) {
> > > > > > > > >
> > > > > > > > > + return EFI_NOT_READY;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {
> > > > > > > > >
> > > > > > > > > + Status = StartPciRootPortsOnBridge (
> > > > > > > > >
> > > > > > > > > + Controller,
> > > > > > > > >
> > > > > > > > > + PciIoDevice
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + PciIoDevice->PciIo.Attributes (
> > > > > > > > >
> > > > > > > > > + &(PciIoDevice->PciIo),
> > > > > > > > >
> > > > > > > > > + EfiPciIoAttributeOperationSupported,
> > > > > > > > >
> > > > > > > > > + 0,
> > > > > > > > >
> > > > > > > > > + &Supports
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
> > > > > > > > >
> > > > > > > > > + PciIoDevice->PciIo.Attributes (
> > > > > > > > >
> > > > > > > > > + &(PciIoDevice->PciIo),
> > > > > > > > >
> > > > > > > > > + EfiPciIoAttributeOperationEnable,
> > > > > > > > >
> > > > > > > > > + Supports,
> > > > > > > > >
> > > > > > > > > + NULL
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + CurrentLink = CurrentLink->ForwardLink;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if (PciIoDevice == NULL) {
> > > > > > > > >
> > > > > > > > > + return EFI_NOT_FOUND;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Register to manage the PCI device on the specified root
> bridge or
> > > > > > PCI-PCI
> > > > > > > > > Bridge.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param Controller The root bridge handle.
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > + @param RemainingDevicePath A pointer to the
> > > > > > > > > EFI_DEVICE_PATH_PROTOCOL.
> > > > > > > > >
> > > > > > > > > + @param NumberOfChildren Children number.
> > > > > > > > >
> > > > > > > > > + @param ChildHandleBuffer A pointer to the child handle
> buffer.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_NOT_READY Device is not allocated.
> > > > > > > > >
> > > > > > > > > + @retval EFI_UNSUPPORTED Device only support PCI-PCI
> bridge.
> > > > > > > > >
> > > > > > > > > + @retval EFI_NOT_FOUND Can not find the specific device.
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS Success to start Pci devices on
> bridge.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +RegisterPciDevicesOnBridge (
> > > > > > > > >
> > > > > > > > > IN EFI_HANDLE Controller,
> > > > > > > > >
> > > > > > > > > IN PCI_IO_DEVICE *RootBridge,
> > > > > > > > >
> > > > > > > > > IN EFI_DEVICE_PATH_PROTOCOL
> *RemainingDevicePath,
> > > > > > > > >
> > > > > > > > > @@ -626,7 +664,6 @@ StartPciDevicesOnBridge (
> > > > > > > > > EFI_DEVICE_PATH_PROTOCOL *CurrentDevicePath;
> > > > > > > > >
> > > > > > > > > EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > LIST_ENTRY *CurrentLink;
> > > > > > > > >
> > > > > > > > > - UINT64 Supports;
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > PciIoDevice = NULL;
> > > > > > > > >
> > > > > > > > > CurrentLink = RootBridge->ChildList.ForwardLink;
> > > > > > > > >
> > > > > > > > > @@ -681,7 +718,7 @@ StartPciDevicesOnBridge (
> > > > > > > > > // If it is a PPB
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {
> > > > > > > > >
> > > > > > > > > - Status = StartPciDevicesOnBridge (
> > > > > > > > >
> > > > > > > > > + Status = RegisterPciDevicesOnBridge (
> > > > > > > > >
> > > > > > > > > Controller,
> > > > > > > > >
> > > > > > > > > PciIoDevice,
> > > > > > > > >
> > > > > > > > > CurrentDevicePath,
> > > > > > > > >
> > > > > > > > > @@ -689,20 +726,6 @@ StartPciDevicesOnBridge (
> > > > > > > > > ChildHandleBuffer
> > > > > > > > >
> > > > > > > > > );
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.Attributes (
> > > > > > > > >
> > > > > > > > > - &(PciIoDevice->PciIo),
> > > > > > > > >
> > > > > > > > > - EfiPciIoAttributeOperationSupported,
> > > > > > > > >
> > > > > > > > > - 0,
> > > > > > > > >
> > > > > > > > > - &Supports
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.Attributes (
> > > > > > > > >
> > > > > > > > > - &(PciIoDevice->PciIo),
> > > > > > > > >
> > > > > > > > > - EfiPciIoAttributeOperationEnable,
> > > > > > > > >
> > > > > > > > > - Supports,
> > > > > > > > >
> > > > > > > > > - NULL
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > return Status;
> > > > > > > > >
> > > > > > > > > } else {
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > @@ -733,28 +756,13 @@ StartPciDevicesOnBridge (
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {
> > > > > > > > >
> > > > > > > > > - Status = StartPciDevicesOnBridge (
> > > > > > > > >
> > > > > > > > > + Status = RegisterPciDevicesOnBridge (
> > > > > > > > >
> > > > > > > > > Controller,
> > > > > > > > >
> > > > > > > > > PciIoDevice,
> > > > > > > > >
> > > > > > > > > RemainingDevicePath,
> > > > > > > > >
> > > > > > > > > NumberOfChildren,
> > > > > > > > >
> > > > > > > > > ChildHandleBuffer
> > > > > > > > >
> > > > > > > > > );
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.Attributes (
> > > > > > > > >
> > > > > > > > > - &(PciIoDevice->PciIo),
> > > > > > > > >
> > > > > > > > > - EfiPciIoAttributeOperationSupported,
> > > > > > > > >
> > > > > > > > > - 0,
> > > > > > > > >
> > > > > > > > > - &Supports
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
> > > > > > > > >
> > > > > > > > > - PciIoDevice->PciIo.Attributes (
> > > > > > > > >
> > > > > > > > > - &(PciIoDevice->PciIo),
> > > > > > > > >
> > > > > > > > > - EfiPciIoAttributeOperationEnable,
> > > > > > > > >
> > > > > > > > > - Supports,
> > > > > > > > >
> > > > > > > > > - NULL
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > CurrentLink = CurrentLink->ForwardLink;
> > > > > > > > >
> > > > > > > > > @@ -768,6 +776,65 @@ StartPciDevicesOnBridge (
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Start to manage the PCI device on the specified root bridge
> or
> > > > PCI-PCI
> > > > > > > > > Bridge.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param Controller The root bridge handle.
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > + @param RemainingDevicePath A pointer to the
> > > > > > > > > EFI_DEVICE_PATH_PROTOCOL.
> > > > > > > > >
> > > > > > > > > + @param NumberOfChildren Children number.
> > > > > > > > >
> > > > > > > > > + @param ChildHandleBuffer A pointer to the child handle
> buffer.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_NOT_READY Device is not allocated.
> > > > > > > > >
> > > > > > > > > + @retval EFI_UNSUPPORTED Device only support PCI-PCI
> bridge.
> > > > > > > > >
> > > > > > > > > + @retval EFI_NOT_FOUND Can not find the specific device.
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS Success to start Pci devices on
> bridge.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +StartPciDevicesOnBridge (
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE Controller,
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge,
> > > > > > > > >
> > > > > > > > > + IN EFI_DEVICE_PATH_PROTOCOL
> *RemainingDevicePath,
> > > > > > > > >
> > > > > > > > > + IN OUT UINT8 *NumberOfChildren,
> > > > > > > > >
> > > > > > > > > + IN OUT EFI_HANDLE *ChildHandleBuffer
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // first register all the PCI devices
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + Status = RegisterPciDevicesOnBridge (
> > > > > > > > >
> > > > > > > > > + Controller,
> > > > > > > > >
> > > > > > > > > + RootBridge,
> > > > > > > > >
> > > > > > > > > + RemainingDevicePath,
> > > > > > > > >
> > > > > > > > > + NumberOfChildren,
> > > > > > > > >
> > > > > > > > > + ChildHandleBuffer
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if (EFI_ERROR (Status) == EFI_NOT_FOUND) {
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + if ( CheckOtherPciFeaturesPcd ()) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // the late configuration of PCI features
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + Status = EnumerateOtherPciFeatures (
> > > > > > > > >
> > > > > > > > > + RootBridge
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // finally start those PCI bridge port devices only
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return StartPciRootPortsOnBridge (
> > > > > > > > >
> > > > > > > > > + Controller,
> > > > > > > > >
> > > > > > > > > + RootBridge
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > /**
> > > > > > > > >
> > > > > > > > > Start to manage all the PCI devices it found previously under
> > > > > > > > >
> > > > > > > > > the entire host bridge.
> > > > > > > > >
> > > > > > > > > diff --git
> a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c
> > > > > > > > > index 8db1ebf8ec..0a56668380 100644
> > > > > > > > > --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c
> > > > > > > > > +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c
> > > > > > > > > @@ -1003,7 +1003,7 @@ PciHostBridgeAdjustAllocation (
> > > > > > > > > Status = RejectPciDevice (PciResNode->PciDev);
> > > > > > > > >
> > > > > > > > > if (Status == EFI_SUCCESS) {
> > > > > > > > >
> > > > > > > > > DEBUG ((
> > > > > > > > >
> > > > > > > > > - EFI_D_ERROR,
> > > > > > > > >
> > > > > > > > > + DEBUG_ERROR,
> > > > > > > > >
> > > > > > > > > "PciBus: [%02x|%02x|%02x] was rejected due to resource
> > > > > > > > > confliction.\n",
> > > > > > > > >
> > > > > > > > > PciResNode->PciDev->BusNumber, PciResNode->PciDev-
> > > > > > > > > >DeviceNumber, PciResNode->PciDev->FunctionNumber
> > > > > > > > >
> > > > > > > > > ));
> > > > > > > > >
> > > > > > > > > @@ -1746,7 +1746,7 @@ NotifyPhase (
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > HostBridgeHandle = NULL;
> > > > > > > > >
> > > > > > > > > RootBridgeHandle = NULL;
> > > > > > > > >
> > > > > > > > > - if (gPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + if ( CheckPciPlatformProtocolInstall()) {
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > // Get Host Bridge Handle.
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > @@ -1770,42 +1770,11 @@ NotifyPhase (
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > // Call PlatformPci::PlatformNotify() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol->PlatformNotify (
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > - HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > - Phase,
> > > > > > > > >
> > > > > > > > > - ChipsetEntry
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - } else if (gPciOverrideProtocol != NULL){
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // Get Host Bridge Handle.
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - PciResAlloc->GetNextRootBridge (PciResAlloc,
> > > > &RootBridgeHandle);
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // Get the rootbridge Io protocol to find the host bridge
> handle
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - Status = gBS->HandleProtocol (
> > > > > > > > >
> > > > > > > > > - RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > - &gEfiPciRootBridgeIoProtocolGuid,
> > > > > > > > >
> > > > > > > > > - (VOID **) &PciRootBridgeIo
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > - if (EFI_ERROR (Status)) {
> > > > > > > > >
> > > > > > > > > - return EFI_NOT_FOUND;
> > > > > > > > >
> > > > > > > > > - }
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > - HostBridgeHandle = PciRootBridgeIo->ParentHandle;
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // Call PlatformPci::PhaseNotify() if the protocol is present.
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol->PlatformNotify (
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > - HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > - Phase,
> > > > > > > > >
> > > > > > > > > - ChipsetEntry
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > + PciPlatformNotifyPhase (
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ChipsetEntry
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Status = PciResAlloc->NotifyPhase (
> > > > > > > > >
> > > > > > > > > @@ -1813,27 +1782,15 @@ NotifyPhase (
> > > > > > > > > Phase
> > > > > > > > >
> > > > > > > > > );
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > - if (gPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + if ( CheckPciPlatformProtocolInstall()) {
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > // Call PlatformPci::PlatformNotify() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol->PlatformNotify (
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > - HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > - Phase,
> > > > > > > > >
> > > > > > > > > - ChipsetExit
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > - } else if (gPciOverrideProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // Call PlatformPci::PhaseNotify() if the protocol is present.
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol->PlatformNotify (
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > - HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > - Phase,
> > > > > > > > >
> > > > > > > > > - ChipsetExit
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > + PciPlatformNotifyPhase (
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ChipsetExit
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > return Status;
> > > > > > > > >
> > > > > > > > > @@ -1914,31 +1871,16 @@ PreprocessController (
> > > > > > > > > RootBridgePciAddress.Bus = Bus;
> > > > > > > > >
> > > > > > > > > RootBridgePciAddress.ExtendedRegister = 0;
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > - if (gPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol->PlatformPrepController (
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > - HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > - RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > - RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > - Phase,
> > > > > > > > >
> > > > > > > > > - ChipsetEntry
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - } else if (gPciOverrideProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol->PlatformPrepController (
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > - HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > - RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > - RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > - Phase,
> > > > > > > > >
> > > > > > > > > - ChipsetEntry
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciPlatformPreprocessController (
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ChipsetEntry
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Status = PciResAlloc->PreprocessController (
> > > > > > > > >
> > > > > > > > > PciResAlloc,
> > > > > > > > >
> > > > > > > > > @@ -1947,31 +1889,16 @@ PreprocessController (
> > > > > > > > > Phase
> > > > > > > > >
> > > > > > > > > );
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > - if (gPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol->PlatformPrepController (
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > - HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > - RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > - RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > - Phase,
> > > > > > > > >
> > > > > > > > > - ChipsetExit
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - } else if (gPciOverrideProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > - //
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol->PlatformPrepController (
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > - HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > - RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > - RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > - Phase,
> > > > > > > > >
> > > > > > > > > - ChipsetExit
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciPlatformPreprocessController (
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ChipsetExit
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > diff --git
> > > > > > a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c
> > > > > > > > >
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c
> > > > > > > > > index c7eafff593..2343702154 100644
> > > > > > > > > ---
> a/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c
> > > > > > > > > +++
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumeratorSupport.c
> > > > > > > > > @@ -230,7 +230,7 @@ PciSearchDevice (
> > > > > > > > > PciIoDevice = NULL;
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > DEBUG ((
> > > > > > > > >
> > > > > > > > > - EFI_D_INFO,
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO,
> > > > > > > > >
> > > > > > > > > "PciBus: Discovered %s @ [%02x|%02x|%02x]\n",
> > > > > > > > >
> > > > > > > > > IS_PCI_BRIDGE (Pci) ? L"PPB" :
> > > > > > > > >
> > > > > > > > > IS_CARDBUS_BRIDGE (Pci) ? L"P2C" :
> > > > > > > > >
> > > > > > > > > @@ -397,7 +397,7 @@ DumpPpbPaddingResource (
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > if ((Type != PciBarTypeUnknown) && ((ResourceType ==
> > > > > > > > > PciBarTypeUnknown) || (ResourceType == Type))) {
> > > > > > > > >
> > > > > > > > > DEBUG ((
> > > > > > > > >
> > > > > > > > > - EFI_D_INFO,
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO,
> > > > > > > > >
> > > > > > > > > " Padding: Type = %s; Alignment = 0x%lx;\tLength =
> 0x%lx\n",
> > > > > > > > >
> > > > > > > > > mBarTypeStr[Type], Descriptor->AddrRangeMax,
> Descriptor-
> > > > > > >AddrLen
> > > > > > > > >
> > > > > > > > > ));
> > > > > > > > >
> > > > > > > > > @@ -424,7 +424,7 @@ DumpPciBars (
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > DEBUG ((
> > > > > > > > >
> > > > > > > > > - EFI_D_INFO,
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO,
> > > > > > > > >
> > > > > > > > > " BAR[%d]: Type = %s; Alignment = 0x%lx;\tLength =
> > > > 0x%lx;\tOffset
> > > > > > =
> > > > > > > > > 0x%02x\n",
> > > > > > > > >
> > > > > > > > > Index, mBarTypeStr[MIN (PciIoDevice-
> >PciBar[Index].BarType,
> > > > > > > > > PciBarTypeMaxType)],
> > > > > > > > >
> > > > > > > > > PciIoDevice->PciBar[Index].Alignment, PciIoDevice-
> > > > > > > > > >PciBar[Index].Length, PciIoDevice->PciBar[Index].Offset
> > > > > > > > >
> > > > > > > > > @@ -437,13 +437,13 @@ DumpPciBars (
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > DEBUG ((
> > > > > > > > >
> > > > > > > > > - EFI_D_INFO,
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO,
> > > > > > > > >
> > > > > > > > > " VFBAR[%d]: Type = %s; Alignment = 0x%lx;\tLength =
> > > > > > 0x%lx;\tOffset =
> > > > > > > > > 0x%02x\n",
> > > > > > > > >
> > > > > > > > > Index, mBarTypeStr[MIN (PciIoDevice-
> > >VfPciBar[Index].BarType,
> > > > > > > > > PciBarTypeMaxType)],
> > > > > > > > >
> > > > > > > > > PciIoDevice->VfPciBar[Index].Alignment, PciIoDevice-
> > > > > > > > > >VfPciBar[Index].Length, PciIoDevice->VfPciBar[Index].Offset
> > > > > > > > >
> > > > > > > > > ));
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > - DEBUG ((EFI_D_INFO, "\n"));
> > > > > > > > >
> > > > > > > > > + DEBUG ((DEBUG_INFO, "\n"));
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > /**
> > > > > > > > >
> > > > > > > > > @@ -1903,7 +1903,7 @@ PciParseBar (
> > > > > > > > > // Fix the length to support some special 64 bit BAR
> > > > > > > > >
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > if (Value == 0) {
> > > > > > > > >
> > > > > > > > > - DEBUG ((EFI_D_INFO, "[PciBus]BAR probing for upper
> 32bit of
> > > > > > MEM64
> > > > > > > > > BAR returns 0, change to 0xFFFFFFFF.\n"));
> > > > > > > > >
> > > > > > > > > + DEBUG ((DEBUG_INFO, "[PciBus]BAR probing for upper
> 32bit
> > > > of
> > > > > > > > MEM64
> > > > > > > > > BAR returns 0, change to 0xFFFFFFFF.\n"));
> > > > > > > > >
> > > > > > > > > Value = (UINT32) -1;
> > > > > > > > >
> > > > > > > > > } else {
> > > > > > > > >
> > > > > > > > > Value |= ((UINT32)(-1) << HighBitSet32 (Value));
> > > > > > > > >
> > > > > > > > > @@ -2153,7 +2153,17 @@ CreatePciIoDevice (
> > > > > > > > > NULL
> > > > > > > > >
> > > > > > > > > );
> > > > > > > > >
> > > > > > > > > if (!EFI_ERROR (Status)) {
> > > > > > > > >
> > > > > > > > > - PciIoDevice->IsPciExp = TRUE;
> > > > > > > > >
> > > > > > > > > + PciIoDevice->IsPciExp = TRUE;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // read the PCI device's entire PCI Express Capability
> structure
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciIo->Pci.Read (
> > > > > > > > >
> > > > > > > > > + PciIo,
> > > > > > > > >
> > > > > > > > > + EfiPciIoWidthUint8,
> > > > > > > > >
> > > > > > > > > + PciIoDevice->PciExpressCapabilityOffset,
> > > > > > > > >
> > > > > > > > > + sizeof (PCI_CAPABILITY_PCIEXP) / sizeof (UINT8),
> > > > > > > > >
> > > > > > > > > + &PciIoDevice->PciExpStruct
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > if (PcdGetBool (PcdAriSupport)) {
> > > > > > > > >
> > > > > > > > > @@ -2206,7 +2216,7 @@ CreatePciIoDevice (
> > > > > > > > > &Data32
> > > > > > > > >
> > > > > > > > > );
> > > > > > > > >
> > > > > > > > > DEBUG ((
> > > > > > > > >
> > > > > > > > > - EFI_D_INFO,
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO,
> > > > > > > > >
> > > > > > > > > " ARI: forwarding enabled for PPB[%02x:%02x:%02x]\n",
> > > > > > > > >
> > > > > > > > > Bridge->BusNumber,
> > > > > > > > >
> > > > > > > > > Bridge->DeviceNumber,
> > > > > > > > >
> > > > > > > > > @@ -2215,7 +2225,7 @@ CreatePciIoDevice (
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > - DEBUG ((EFI_D_INFO, " ARI: CapOffset = 0x%x\n",
> PciIoDevice-
> > > > > > > > > >AriCapabilityOffset));
> > > > > > > > >
> > > > > > > > > + DEBUG ((DEBUG_INFO, " ARI: CapOffset = 0x%x\n",
> > > > PciIoDevice-
> > > > > > > > > >AriCapabilityOffset));
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > @@ -2325,12 +2335,12 @@ CreatePciIoDevice (
> > > > > > > > > PciIoDevice->ReservedBusNum =
> > > > (UINT16)(EFI_PCI_BUS_OF_RID
> > > > > > > > (LastVF)
> > > > > > > > > - Bus + 1);
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > DEBUG ((
> > > > > > > > >
> > > > > > > > > - EFI_D_INFO,
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO,
> > > > > > > > >
> > > > > > > > > " SR-IOV: SupportedPageSize = 0x%x; SystemPageSize =
> 0x%x;
> > > > > > > > > FirstVFOffset = 0x%x;\n",
> > > > > > > > >
> > > > > > > > > SupportedPageSize, PciIoDevice->SystemPageSize >> 12,
> > > > > > FirstVFOffset
> > > > > > > > >
> > > > > > > > > ));
> > > > > > > > >
> > > > > > > > > DEBUG ((
> > > > > > > > >
> > > > > > > > > - EFI_D_INFO,
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO,
> > > > > > > > >
> > > > > > > > > " InitialVFs = 0x%x; ReservedBusNum = 0x%x;
> CapOffset =
> > > > > > 0x%x\n",
> > > > > > > > >
> > > > > > > > > PciIoDevice->InitialVFs, PciIoDevice->ReservedBusNum,
> > > > > > PciIoDevice-
> > > > > > > > > >SrIovCapabilityOffset
> > > > > > > > >
> > > > > > > > > ));
> > > > > > > > >
> > > > > > > > > @@ -2345,7 +2355,7 @@ CreatePciIoDevice (
> > > > > > > > > NULL
> > > > > > > > >
> > > > > > > > > );
> > > > > > > > >
> > > > > > > > > if (!EFI_ERROR (Status)) {
> > > > > > > > >
> > > > > > > > > - DEBUG ((EFI_D_INFO, " MR-IOV: CapOffset = 0x%x\n",
> > > > PciIoDevice-
> > > > > > > > > >MrIovCapabilityOffset));
> > > > > > > > >
> > > > > > > > > + DEBUG ((DEBUG_INFO, " MR-IOV: CapOffset = 0x%x\n",
> > > > > > PciIoDevice-
> > > > > > > > > >MrIovCapabilityOffset));
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > diff --git
> a/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.c
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.c
> > > > > > > > > new file mode 100644
> > > > > > > > > index 0000000000..0819da6536
> > > > > > > > > --- /dev/null
> > > > > > > > > +++
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.c
> > > > > > > > > @@ -0,0 +1,1601 @@
> > > > > > > > > +/** @file
> > > > > > > > >
> > > > > > > > > + PCI standard feature support functions implementation for
> PCI
> > > > Bus
> > > > > > > > > module..
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> > > > > > > > >
> > > > > > > > > +SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +#include "PciFeatureSupport.h"
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + A gobal pointer to PRIMARY_ROOT_PORT_NODE buffer to
> track
> > > > all
> > > > > > the
> > > > > > > > > primary physical
> > > > > > > > >
> > > > > > > > > + PCI Root Ports (PCI Controllers) for a given PCI Root Bridge
> > > > instance
> > > > > > while
> > > > > > > > >
> > > > > > > > > + enumerating to configure the PCI features
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +PRIMARY_ROOT_PORT_NODE
> *mPrimaryRootPortList;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + A gobal pointer to
> > > > OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > buffer
> > > > > > > > > all the PCI
> > > > > > > > >
> > > > > > > > > + Feature configuration Table nodes to pair against each of
> the
> > > > > > > > > PRIMARY_ROOT_PORT_NODE
> > > > > > > > >
> > > > > > > > > + buffer nodes. Each node of these is used to align all the PCI
> > > > devices
> > > > > > > > > originating
> > > > > > > > >
> > > > > > > > > + from the PCI Root Port devices of a PCI Root Bridge instance
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > > *mPciFeaturesConfigurationTableInstances;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + A global pointer to
> > > > > > PCI_FEATURE_CONFIGURATION_COMPLETION_LIST,
> > > > > > > > > which stores all
> > > > > > > > >
> > > > > > > > > + the PCI Root Bridge instances that are enumerated for the
> other
> > > > PCI
> > > > > > > > > features,
> > > > > > > > >
> > > > > > > > > + like MaxPayloadSize & MaxReadReqSize; during the the
> Start()
> > > > > > interface
> > > > > > > > of
> > > > > > > > > the
> > > > > > > > >
> > > > > > > > > + driver binding protocol. The records pointed by this pointer
> would
> > > > be
> > > > > > > > > destroyed
> > > > > > > > >
> > > > > > > > > + when the DXE core invokes the Stop() interface.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +PCI_FEATURE_CONFIGURATION_COMPLETION_LIST
> > > > > > > > > *mPciFeaturesConfigurationCompletionList = NULL;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Main routine to indicate platform selection of any of the
> other
> > PCI
> > > > > > > > features
> > > > > > > > >
> > > > > > > > > + to be configured by this driver
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE platform has selected the other PCI features
> to
> > be
> > > > > > > > > configured
> > > > > > > > >
> > > > > > > > > + FALSE platform has not selected any of the other PCI
> > > > features
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +CheckOtherPciFeaturesPcd (
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + return PcdGet32 ( PcdOtherPciFeatures) ? TRUE : FALSE;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Main routine to indicate whether the platform has selected
> the
> > > > > > > > > Max_Payload_Size
> > > > > > > > >
> > > > > > > > > + PCI feature to be configured by this driver
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE platform has selected the
> Max_Payload_Size to
> > > > be
> > > > > > > > > configured
> > > > > > > > >
> > > > > > > > > + FALSE platform has not selected this feature
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +SetupMaxPayloadSize (
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + return (PcdGet32 ( PcdOtherPciFeatures) &
> > > > > > > > > PCI_FEATURE_SUPPORT_FLAG_MPS) ? TRUE : FALSE;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Main routine to indicate whether the platform has selected
> the
> > > > > > > > > Max_Read_Req_Size
> > > > > > > > >
> > > > > > > > > + PCI feature to be configured by this driver
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE platform has selected the
> Max_Read_Req_Size to
> > > > be
> > > > > > > > > configured
> > > > > > > > >
> > > > > > > > > + FALSE platform has not selected this feature
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +SetupMaxReadReqSize (
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + return (PcdGet32 ( PcdOtherPciFeatures) &
> > > > > > > > > PCI_FEATURE_SUPPORT_FLAG_MRRS) ? TRUE : FALSE;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Helper routine which determines whether the given PCI
> Root
> > > > Bridge
> > > > > > > > > instance
> > > > > > > > >
> > > > > > > > > + record already exist. This routine shall help avoid duplicate
> record
> > > > > > > > creation
> > > > > > > > >
> > > > > > > > > + in case of re-enumeration of PCI configuation features.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE
> for
> > > > the
> > > > > > Root
> > > > > > > > > Bridge
> > > > > > > > >
> > > > > > > > > + @param PciFeatureConfigRecord A pointer to a pointer for
> type
> > > > > > > > >
> > > > > > > > > +
> > > > PCI_FEATURE_CONFIGURATION_COMPLETION_LIST
> > > > > > > > >
> > > > > > > > > + record, Use to return the specific record.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE Record already exist
> > > > > > > > >
> > > > > > > > > + FALSE Record does not exist for the given PCI
> Root
> > > > > > Bridge
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +CheckPciFeatureConfigurationRecordExist (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge,
> > > > > > > > >
> > > > > > > > > + OUT PCI_FEATURE_CONFIGURATION_COMPLETION_LIST
> > > > > > > > > **PciFeatureConfigRecord
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PCI_FEATURE_CONFIGURATION_COMPLETION_LIST
> *Temp;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( mPciFeaturesConfigurationCompletionList) {
> > > > > > > > >
> > > > > > > > > + Link = &mPciFeaturesConfigurationCompletionList-
> > > > >RootBridgeLink;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + do {
> > > > > > > > >
> > > > > > > > > + Temp =
> > > > > > > > >
> PCI_FEATURE_CONFIGURATION_COMPLETION_LIST_FROM_LINK
> > > > > > (Link);
> > > > > > > > >
> > > > > > > > > + if ( Temp->RootBridgeHandle == RootBridge->Handle) {
> > > > > > > > >
> > > > > > > > > + *PciFeatureConfigRecord = Temp;
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Link = Link->ForwardLink;
> > > > > > > > >
> > > > > > > > > + } while (Link !=
> &mPciFeaturesConfigurationCompletionList-
> > > > > > > > > >RootBridgeLink);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // not found on the PCI feature configuration completion list
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + *PciFeatureConfigRecord = NULL;
> > > > > > > > >
> > > > > > > > > + return FALSE;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This routine is primarily to avoid multiple configuration of PCI
> > > > features
> > > > > > > > >
> > > > > > > > > + to the same PCI Root Bridge due to EDK2 core's
> > ConnectController
> > > > > > calls
> > > > > > > > on
> > > > > > > > >
> > > > > > > > > + all the EFI handles. This routine also provide re-enumeration
> of
> > > > the
> > > > > > PCI
> > > > > > > > >
> > > > > > > > > + features on the same PCI Root Bridge based on the policy of
> > > > > > > > > ReEnumeratePciFeatureConfiguration
> > > > > > > > >
> > > > > > > > > + of the PCI_FEATURE_CONFIGURATION_COMPLETION_LIST.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE
> for
> > > > the
> > > > > > Root
> > > > > > > > > Bridge
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE PCI Feature configuration required
> for
> > the
> > > > PCI
> > > > > > > > >
> > > > > > > > > + Root Bridge
> > > > > > > > >
> > > > > > > > > + FALSE PCI Feature configuration is not required
> to
> > be
> > > > > > > > >
> > > > > > > > > + re-enumerated for the PCI Root Bridge
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +CheckPciFeaturesConfigurationRequired (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PCI_FEATURE_CONFIGURATION_COMPLETION_LIST
> *Temp;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( mPciFeaturesConfigurationCompletionList) {
> > > > > > > > >
> > > > > > > > > + Link = &mPciFeaturesConfigurationCompletionList-
> > > > >RootBridgeLink;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + do {
> > > > > > > > >
> > > > > > > > > + Temp =
> > > > > > > > >
> PCI_FEATURE_CONFIGURATION_COMPLETION_LIST_FROM_LINK
> > > > > > (Link);
> > > > > > > > >
> > > > > > > > > + if ( Temp->RootBridgeHandle == RootBridge->Handle) {
> > > > > > > > >
> > > > > > > > > + return Temp->ReEnumeratePciFeatureConfiguration;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Link = Link->ForwardLink;
> > > > > > > > >
> > > > > > > > > + } while (Link !=
> &mPciFeaturesConfigurationCompletionList-
> > > > > > > > > >RootBridgeLink);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // not found on the PCI feature configuration completion list,
> > > > return
> > > > > > as
> > > > > > > > > required
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This routine finds the duplicate record if exist and assigns
> the re-
> > > > > > > > > enumeration
> > > > > > > > >
> > > > > > > > > + requirement flag, as passed as input. It creates new record
> for
> > > > the
> > > > > > PCI
> > > > > > > > > Root
> > > > > > > > >
> > > > > > > > > + Bridge and appends the list after updating its re-
> enumeration
> > flag.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to PCI_IO_DEVICE of
> the
> > > > Root
> > > > > > > > Bridge
> > > > > > > > >
> > > > > > > > > + @param ReEnumerationRequired A BOOLEAN for recording
> the
> > > > re-
> > > > > > > > > enumeration requirement
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS new record inserted into the list
> or
> > > > > > updated
> > > > > > > > the
> > > > > > > > >
> > > > > > > > > + existing record
> > > > > > > > >
> > > > > > > > > + EFI_INVALID_PARAMETER Unexpected error as
> > > > > > > > > CheckPciFeatureConfigurationRecordExist
> > > > > > > > >
> > > > > > > > > + reports as record exist but does not return its
> > > > pointer
> > > > > > > > >
> > > > > > > > > + EFI_OUT_OF_RESOURCES Not able to create PCI
> features
> > > > > > > > configuratin
> > > > > > > > > complete
> > > > > > > > >
> > > > > > > > > + record for the RootBridge
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +AddRootBridgeInPciFeaturesConfigCompletionList (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge,
> > > > > > > > >
> > > > > > > > > + IN BOOLEAN ReEnumerationRequired
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + PCI_FEATURE_CONFIGURATION_COMPLETION_LIST
> *Temp;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( CheckPciFeatureConfigurationRecordExist ( RootBridge,
> > > > &Temp))
> > > > > > {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // this PCI Root Bridge record already exist; it may have
> been re-
> > > > > > > > > enumerated
> > > > > > > > >
> > > > > > > > > + // hence just update its enumeration required flag again to
> exit
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( Temp) {
> > > > > > > > >
> > > > > > > > > + Temp->ReEnumeratePciFeatureConfiguration =
> > > > > > > > > ReEnumerationRequired;
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // PCI feature configuration complete record reported as
> exist
> > > > and
> > > > > > no
> > > > > > > > >
> > > > > > > > > + // record pointer returned
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return EFI_INVALID_PARAMETER;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Temp = AllocateZeroPool ( sizeof
> > > > > > > > > ( PCI_FEATURE_CONFIGURATION_COMPLETION_LIST));
> > > > > > > > >
> > > > > > > > > + if ( !Temp) {
> > > > > > > > >
> > > > > > > > > + return EFI_OUT_OF_RESOURCES;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Temp->Signature =
> > > > > > > > > PCI_FEATURE_CONFIGURATION_SIGNATURE;
> > > > > > > > >
> > > > > > > > > + Temp->RootBridgeHandle = RootBridge->Handle;
> > > > > > > > >
> > > > > > > > > + Temp->ReEnumeratePciFeatureConfiguration =
> > > > > > > > ReEnumerationRequired;
> > > > > > > > >
> > > > > > > > > + if ( mPciFeaturesConfigurationCompletionList) {
> > > > > > > > >
> > > > > > > > > + InsertTailList
> ( &mPciFeaturesConfigurationCompletionList-
> > > > > > > > > >RootBridgeLink,
> > > > > > > > >
> > > > > > > > > + &Temp->RootBridgeLink);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // init the very first node of the Root Bridge
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + mPciFeaturesConfigurationCompletionList = Temp;
> > > > > > > > >
> > > > > > > > > + InitializeListHead
> ( &mPciFeaturesConfigurationCompletionList-
> > > > > > > > > >RootBridgeLink);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Free up memory alloted for the primary physical PCI Root
> ports of
> > > > the
> > > > > > > > PCI
> > > > > > > > > Root
> > > > > > > > >
> > > > > > > > > + Bridge instance. Free up all the nodes of type
> > > > > > > > > PRIMARY_ROOT_PORT_NODE.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +VOID
> > > > > > > > >
> > > > > > > > > +DestroyPrimaryRootPortNodes ()
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PRIMARY_ROOT_PORT_NODE *Temp;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( mPrimaryRootPortList) {
> > > > > > > > >
> > > > > > > > > + Link = &mPrimaryRootPortList->NeighborRootPort;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( IsListEmpty ( Link)) {
> > > > > > > > >
> > > > > > > > > + FreePool ( mPrimaryRootPortList);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + do {
> > > > > > > > >
> > > > > > > > > + if ( Link->ForwardLink != &mPrimaryRootPortList-
> > > > > > >NeighborRootPort)
> > > > > > > > {
> > > > > > > > >
> > > > > > > > > + Link = Link->ForwardLink;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Temp = PRIMARY_ROOT_PORT_NODE_FROM_LINK
> ( Link);
> > > > > > > > >
> > > > > > > > > + Link = RemoveEntryList ( Link);
> > > > > > > > >
> > > > > > > > > + FreePool ( Temp);
> > > > > > > > >
> > > > > > > > > + } while ( !IsListEmpty ( Link));
> > > > > > > > >
> > > > > > > > > + FreePool ( mPrimaryRootPortList);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + mPrimaryRootPortList = NULL;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Free up the memory allocated for temporarily maintaining
> the PCI
> > > > > > > > feature
> > > > > > > > >
> > > > > > > > > + configuration table for all the nodes of the primary PCI Root
> port.
> > > > > > > > >
> > > > > > > > > + Free up memory alloted for
> > > > > > > > > OTHER_PCI_FEATURES_CONFIGURATION_TABLE.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +VOID
> > > > > > > > >
> > > > > > > > > +ErasePciFeaturesConfigurationTable (
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + if ( mPciFeaturesConfigurationTableInstances) {
> > > > > > > > >
> > > > > > > > > + FreePool ( mPciFeaturesConfigurationTableInstances);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + mPciFeaturesConfigurationTableInstances = NULL;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Routine meant for initializing any global variables used. It
> > primarily
> > > > > > cleans
> > > > > > > > >
> > > > > > > > > + up the internal data structure memory allocated for the
> previous
> > > > PCI
> > > > > > > > Root
> > > > > > > > > Bridge
> > > > > > > > >
> > > > > > > > > + instance. This should be the first routine to call for any
> virtual PCI
> > > > > > Root
> > > > > > > > >
> > > > > > > > > + Bridge instance.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +VOID
> > > > > > > > >
> > > > > > > > > +SetupPciFeaturesConfigurationDefaults ()
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // delete the primary root port list
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if (mPrimaryRootPortList) {
> > > > > > > > >
> > > > > > > > > + DestroyPrimaryRootPortNodes ();
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( mPciFeaturesConfigurationTableInstances) {
> > > > > > > > >
> > > > > > > > > + ErasePciFeaturesConfigurationTable ();
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Helper routine to determine whether the PCI device is a
> physical
> > > > root
> > > > > > > > port
> > > > > > > > >
> > > > > > > > > + recorded in the list.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to the
> PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE The PCI device instance is a
> primary
> > > > > > > > >
> > > > > > > > > + primary physical PCI Root Port
> > > > > > > > >
> > > > > > > > > + FALSE Not a primary physical PCI Root port
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +CheckRootBridgePrimaryPort (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PRIMARY_ROOT_PORT_NODE *Temp;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( !mPrimaryRootPortList) {
> > > > > > > > >
> > > > > > > > > + return FALSE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Link = &mPrimaryRootPortList->NeighborRootPort;
> > > > > > > > >
> > > > > > > > > + do {
> > > > > > > > >
> > > > > > > > > + Temp = PRIMARY_ROOT_PORT_NODE_FROM_LINK ( Link);
> > > > > > > > >
> > > > > > > > > + if ( Temp->RootBridgeHandle == PciDevice->Parent-
> >Handle
> > > > > > > > >
> > > > > > > > > + && Temp->RootPortHandle == PciDevice->Handle) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // the given PCI device is the primary root port of the Root
> > > > Bridge
> > > > > > > > > controller
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Link = Link->ForwardLink;
> > > > > > > > >
> > > > > > > > > + } while ( Link != &mPrimaryRootPortList-
> >NeighborRootPort);
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // the given PCI device is not the primary root port of the
> Bridge
> > > > > > > > controller
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return FALSE;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Main routine to determine the child PCI devices of a physical
> PCI
> > > > > > bridge
> > > > > > > > > device
> > > > > > > > >
> > > > > > > > > + and group them under a common internal PCI features
> > > > Configuration
> > > > > > > > table.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to the
> PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > + @param PciFeaturesConfigTable A pointer to a pointer
> to
> > > > the
> > > > > > > > >
> > > > > > > > > +
> > > > > OTHER_PCI_FEATURES_CONFIGURATION_TABLE.
> > > > > > > > >
> > > > > > > > > + Returns NULL in case of RCiEP or the PCI
> > > > > > > > >
> > > > > > > > > + device does match with any of the
> physical
> > > > > > > > >
> > > > > > > > > + Root ports, or it does not belong to any
> > > > > > > > >
> > > > > > > > > + Root port's PCU bus range (not a child)
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS able to determine the PCI
> > feature
> > > > > > > > >
> > > > > > > > > + configuration table. For RCiEP since
> > > > > > > > >
> > > > > > > > > + since it is not prepared.
> > > > > > > > >
> > > > > > > > > + EFI_NOT_FOUND the PCI feature configuration
> > table
> > > > > > does
> > > > > > > > >
> > > > > > > > > + not exist as the PCI physical Bridge
> device
> > > > > > > > >
> > > > > > > > > + is not found for this device's parent
> > > > > > > > >
> > > > > > > > > + Root Bridge instance
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +GetPciFeaturesConfigurationTable (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice,
> > > > > > > > >
> > > > > > > > > + OUT OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > > **PciFeaturesConfigTable
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PRIMARY_ROOT_PORT_NODE *Temp;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( !mPrimaryRootPortList) {
> > > > > > > > >
> > > > > > > > > + *PciFeaturesConfigTable = NULL;
> > > > > > > > >
> > > > > > > > > + return EFI_NOT_FOUND;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // The PCI features configuration table is not built for RCiEP,
> > > > return
> > > > > > NULL
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( PciDevice->PciExpStruct.Capability.Bits.DevicePortType
> == \
> > > > > > > > >
> > > > > > > > > +
> > > > > >
> PCIE_DEVICE_PORT_TYPE_ROOT_COMPLEX_INTEGRATED_ENDPOINT)
> > > > > > > > > {
> > > > > > > > >
> > > > > > > > > + *PciFeaturesConfigTable = NULL;
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Link = &mPrimaryRootPortList->NeighborRootPort;
> > > > > > > > >
> > > > > > > > > + do {
> > > > > > > > >
> > > > > > > > > + Temp = PRIMARY_ROOT_PORT_NODE_FROM_LINK ( Link);
> > > > > > > > >
> > > > > > > > > + if ( Temp->RootBridgeHandle == PciDevice->Parent-
> >Handle
> > > > > > > > >
> > > > > > > > > + && Temp->RootPortHandle == PciDevice->Handle) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // the given PCI device is the primary root port of the Root
> > > > Bridge
> > > > > > > > > controller
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + *PciFeaturesConfigTable = Temp-
> > > > > > > > >OtherPciFeaturesConfigurationTable;
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // check this PCI device belongs to the primary root port of
> the
> > > > root
> > > > > > > > > bridge
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( PciDevice->BusNumber >= Temp->SecondaryBusStart
> > > > > > > > >
> > > > > > > > > + && PciDevice->BusNumber <= Temp-
> >SecondaryBusEnd) {
> > > > > > > > >
> > > > > > > > > + *PciFeaturesConfigTable = Temp-
> > > > > > > > >OtherPciFeaturesConfigurationTable;
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Link = Link->ForwardLink;
> > > > > > > > >
> > > > > > > > > + } while ( Link != &mPrimaryRootPortList-
> >NeighborRootPort);
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // the PCI device must be RCiEP, does not belong to any
> primary
> > > > root
> > > > > > > > port
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + *PciFeaturesConfigTable = NULL;
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + The helper routine to retrieve the PCI bus numbers from
> the PCI
> > > > > > Bridge
> > > > > > > > or
> > > > > > > > > Root
> > > > > > > > >
> > > > > > > > > + port device. Assumes the input PCI device has the PCI Type
> 1
> > > > > > > > configuration
> > > > > > > > > header.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to the
> PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > + @param PrimaryBusNumber A pointer to return the
> PCI
> > > > > > Priamry
> > > > > > > > >
> > > > > > > > > + Bus number.
> > > > > > > > >
> > > > > > > > > + @param SecondaryBusNumber A pointer to return
> the PCI
> > > > > > > > > Secondary
> > > > > > > > >
> > > > > > > > > + Bus number.
> > > > > > > > >
> > > > > > > > > + @param SubordinateBusNumber A pointer to return
> the
> > > > PCI
> > > > > > > > > Subordinate
> > > > > > > > >
> > > > > > > > > + Bus number.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS The data was read from the PCI
> > device.
> > > > > > > > >
> > > > > > > > > + @retval EFI_UNSUPPORTED The address range specified
> by
> > > > Offset,
> > > > > > > > > Width, and Count is not
> > > > > > > > >
> > > > > > > > > + valid for the PCI configuration header of the
> PCI
> > > > > device.
> > > > > > > > >
> > > > > > > > > + @retval EFI_INVALID_PARAMETER input parameters
> provided to
> > > > the
> > > > > > > > read
> > > > > > > > > operation were invalid.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +GetPciRootPortBusAssigned (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice,
> > > > > > > > >
> > > > > > > > > + OUT UINT8 *PrimaryBusNumber,
> > > > > > > > >
> > > > > > > > > + OUT UINT8 *SecondaryBusNumber,
> > > > > > > > >
> > > > > > > > > + OUT UINT8 *SubordinateBusNumber
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > + UINT32 RootPortBusAssigned;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Status = PciDevice->PciIo.Pci.Read (
> > > > > > > > >
> > > > > > > > > + &PciDevice->PciIo,
> > > > > > > > >
> > > > > > > > > + EfiPciIoWidthUint32,
> > > > > > > > >
> > > > > > > > > +
> > PCI_BRIDGE_PRIMARY_BUS_REGISTER_OFFSET,
> > > > > > > > >
> > > > > > > > > + 1,
> > > > > > > > >
> > > > > > > > > + &RootPortBusAssigned
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + if ( !EFI_ERROR(Status)) {
> > > > > > > > >
> > > > > > > > > + if ( PrimaryBusNumber) {
> > > > > > > > >
> > > > > > > > > + *PrimaryBusNumber = (UINT8) (0xFF &
> RootPortBusAssigned);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + if ( SecondaryBusNumber) {
> > > > > > > > >
> > > > > > > > > + *SecondaryBusNumber = (UINT8)(0xFF &
> > > > (RootPortBusAssigned >>
> > > > > > 8));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + if ( SubordinateBusNumber) {
> > > > > > > > >
> > > > > > > > > + *SubordinateBusNumber = (UINT8)(0xFF &
> > > > > > (RootPortBusAssigned >>
> > > > > > > > > 16));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This routine determines the existance of the child PCI device
> for
> > > > the
> > > > > > > > given
> > > > > > > > >
> > > > > > > > > + PCI Root / Bridge Port device. Always assumes the input PCI
> > > > device is
> > > > > > the
> > > > > > > > > bridge
> > > > > > > > >
> > > > > > > > > + or PCI-PCI Bridge device. This routine should not be used
> with PCI
> > > > > > > > > endpoint device.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to the
> PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE child device exist
> > > > > > > > >
> > > > > > > > > + FALSE no child device
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +IsPciRootPortEmpty (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + UINT8 SecBus,
> > > > > > > > >
> > > > > > > > > + SubBus;
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PCI_IO_DEVICE *NextPciDevice;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // check secondary & suboridinate bus numbers for its
> endpoint
> > > > > > device
> > > > > > > > >
> > > > > > > > > + // existance
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + Status = GetPciRootPortBusAssigned ( PciDevice, NULL,
> &SecBus,
> > > > > > > > > &SubBus);
> > > > > > > > >
> > > > > > > > > + if ( !EFI_ERROR( Status)) {
> > > > > > > > >
> > > > > > > > > + Link = PciDevice->ChildList.ForwardLink;
> > > > > > > > >
> > > > > > > > > + if ( IsListEmpty ( Link)) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // return as PCI Root port empty
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "RP empty,"));
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + do {
> > > > > > > > >
> > > > > > > > > + NextPciDevice = PCI_IO_DEVICE_FROM_LINK ( Link);
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "dev@%x", NextPciDevice-
> > > > >BusNumber));
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( NextPciDevice->BusNumber >= SecBus
> > > > > > > > >
> > > > > > > > > + && NextPciDevice->BusNumber <= SubBus) {
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + return FALSE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Link = Link->ForwardLink;
> > > > > > > > >
> > > > > > > > > + } while ( Link != &PciDevice->ChildList);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + SecBus = SubBus = 0;
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_ERROR, "unable to retrieve root port's
> bus
> > > > range
> > > > > > > > > assigned!!!"));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // return as PCI Root port empty
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + The main routine which process the PCI feature
> > > > Max_Payload_Size as
> > > > > > > > per
> > > > > > > > > the
> > > > > > > > >
> > > > > > > > > + device-specific platform policy, as well as in complaince with
> the
> > > > PCI
> > > > > > Base
> > > > > > > > >
> > > > > > > > > + specification Revision 4, that aligns the value for the entire
> PCI
> > > > > > heirarchy
> > > > > > > > >
> > > > > > > > > + starting from its physical PCI Root port / Bridge device.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to the
> PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > + @param PciConfigPhase for the PCI feature
> > configuration
> > > > > > phases:
> > > > > > > > >
> > > > > > > > > + PciFeatureGetDevicePolicy &
> > > > > > PciFeatureSetupPhase
> > > > > > > > >
> > > > > > > > > + @param PciFeaturesConfigurationTable pointer to
> > > > > > > > > OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS processing of PCI feature
> > > > > > > > > Max_Payload_Size
> > > > > > > > >
> > > > > > > > > + is successful.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +ProcessMaxPayloadSize (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice,
> > > > > > > > >
> > > > > > > > > + IN PCI_FEATURE_CONFIGURATION_PHASE
> PciConfigPhase,
> > > > > > > > >
> > > > > > > > > + IN OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > > *PciFeaturesConfigurationTable
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + PCI_REG_PCIE_DEVICE_CAPABILITY PciDeviceCap;
> > > > > > > > >
> > > > > > > > > + UINT8 MpsValue;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + PciDeviceCap.Uint32 = PciDevice-
> > > > > > >PciExpStruct.DeviceCapability.Uint32;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( PciConfigPhase == PciFeatureGetDevicePolicy) {
> > > > > > > > >
> > > > > > > > > + if ( SetupMpsAsPerDeviceCapability ( PciDevice-
> >SetupMPS))
> > > > > > > > >
> > > > > > > > > + {
> > > > > > > > >
> > > > > > > > > + MpsValue = (UINT8)PciDeviceCap.Bits.MaxPayloadSize;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // no change to PCI Root ports without any endpoint
> device
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( IS_PCI_BRIDGE ( &PciDevice->Pci) &&
> > > > > > > > > PciDeviceCap.Bits.MaxPayloadSize) {
> > > > > > > > >
> > > > > > > > > + if ( IsPciRootPortEmpty ( PciDevice)) {
> > > > > > > > >
> > > > > > > > > + MpsValue = PCIE_MAX_PAYLOAD_SIZE_128B;
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "(reset RP MPS to min.)"));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + MpsValue = TranslateMpsSetupValueToPci ( PciDevice-
> > > > > > >SetupMPS);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // discard device policy override request if greater than PCI
> > > > device
> > > > > > > > > capability
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMPS =
> > > > > > > > MIN( (UINT8)PciDeviceCap.Bits.MaxPayloadSize,
> > > > > > > > > MpsValue);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // align the MPS of the tree to the HCF with this device
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( PciFeaturesConfigurationTable) {
> > > > > > > > >
> > > > > > > > > + MpsValue = PciFeaturesConfigurationTable-
> >Max_Payload_Size;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + MpsValue = MIN ( PciDevice->SetupMPS, MpsValue);
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMPS = MIN ( PciDevice->SetupMPS,
> > > > MpsValue);
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( MpsValue != PciFeaturesConfigurationTable-
> > > > >Max_Payload_Size)
> > > > > > {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "reset MPS of the tree to %d,",
> > > > > > MpsValue));
> > > > > > > > >
> > > > > > > > > + PciFeaturesConfigurationTable->Max_Payload_Size =
> > > > MpsValue;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO,
> > > > > > > > >
> > > > > > > > > + "Max_Payload_Size: %d [DevCap:%d],",
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMPS, PciDeviceCap.Bits.MaxPayloadSize
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + The main routine which process the PCI feature
> > > > Max_Read_Req_Size
> > > > > > as
> > > > > > > > > per the
> > > > > > > > >
> > > > > > > > > + device-specific platform policy, as well as in complaince with
> the
> > > > PCI
> > > > > > Base
> > > > > > > > >
> > > > > > > > > + specification Revision 4, that aligns the value for the entire
> PCI
> > > > > > heirarchy
> > > > > > > > >
> > > > > > > > > + starting from its physical PCI Root port / Bridge device.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to the
> PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > + @param PciConfigPhase for the PCI feature
> > configuration
> > > > > > phases:
> > > > > > > > >
> > > > > > > > > + PciFeatureGetDevicePolicy &
> > > > > > PciFeatureSetupPhase
> > > > > > > > >
> > > > > > > > > + @param PciFeaturesConfigurationTable pointer to
> > > > > > > > > OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS processing of PCI feature
> > > > > > > > > Max_Read_Req_Size
> > > > > > > > >
> > > > > > > > > + is successful.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +ProcessMaxReadReqSize (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice,
> > > > > > > > >
> > > > > > > > > + IN PCI_FEATURE_CONFIGURATION_PHASE
> PciConfigPhase,
> > > > > > > > >
> > > > > > > > > + IN OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > > *PciFeaturesConfigurationTable
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + PCI_REG_PCIE_DEVICE_CAPABILITY PciDeviceCap;
> > > > > > > > >
> > > > > > > > > + UINT8 MrrsValue;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + PciDeviceCap.Uint32 = PciDevice-
> > > > > > >PciExpStruct.DeviceCapability.Uint32;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( PciConfigPhase == PciFeatureGetDevicePolicy) {
> > > > > > > > >
> > > > > > > > > + if ( SetupMrrsAsPerDeviceCapability ( PciDevice-
> >SetupMRRS))
> > > > > > > > >
> > > > > > > > > + {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // The maximum read request size is not the data packet
> size of
> > > > the
> > > > > > > > TLP,
> > > > > > > > >
> > > > > > > > > + // but the memory read request size, and set to the
> function as
> > > > a
> > > > > > > > > requestor
> > > > > > > > >
> > > > > > > > > + // to not exceed this limit.
> > > > > > > > >
> > > > > > > > > + // However, for the PCI device capable of isochronous
> traffic;
> > > > this
> > > > > > > > > memory read
> > > > > > > > >
> > > > > > > > > + // request size should not extend beyond the
> > > > Max_Payload_Size.
> > > > > > Thus,
> > > > > > > > > in case if
> > > > > > > > >
> > > > > > > > > + // device policy return by platform indicates to set as per
> device
> > > > > > > > > capability
> > > > > > > > >
> > > > > > > > > + // than set as per Max_Payload_Size configuration value
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( SetupMaxPayloadSize()) {
> > > > > > > > >
> > > > > > > > > + MrrsValue = PciDevice->SetupMPS;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // in case this driver is not required to configure the
> > > > > > > > Max_Payload_Size
> > > > > > > > >
> > > > > > > > > + // than consider programming HCF of the device
> capability's
> > > > > > > > > Max_Payload_Size
> > > > > > > > >
> > > > > > > > > + // in this PCI hierarchy; thus making this an
> implementation
> > > > > > specific
> > > > > > > > > feature
> > > > > > > > >
> > > > > > > > > + // which the platform should avoid. For better results,
> the
> > > > > > platform
> > > > > > > > > should
> > > > > > > > >
> > > > > > > > > + // make both the Max_Payload_Size &
> > > > Max_Read_Request_Size
> > > > > > to
> > > > > > > > be
> > > > > > > > > configured
> > > > > > > > >
> > > > > > > > > + // by this driver
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + MrrsValue = (UINT8)PciDeviceCap.Bits.MaxPayloadSize;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // override as per platform based device policy
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + MrrsValue = TranslateMrrsSetupValueToPci ( PciDevice-
> > > > > > >SetupMRRS);
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // align this device's Max_Read_Request_Size value to the
> > > > entire
> > > > > > PCI
> > > > > > > > > tree
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( PciFeaturesConfigurationTable) {
> > > > > > > > >
> > > > > > > > > + if ( !PciFeaturesConfigurationTable-
> > > > > > >Lock_Max_Read_Request_Size)
> > > > > > > > {
> > > > > > > > >
> > > > > > > > > + PciFeaturesConfigurationTable-
> > > > >Lock_Max_Read_Request_Size
> > > > > > =
> > > > > > > > > TRUE;
> > > > > > > > >
> > > > > > > > > + PciFeaturesConfigurationTable-
> >Max_Read_Request_Size =
> > > > > > > > > MrrsValue;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // in case of another user enforced value of MRRS
> within the
> > > > > > same
> > > > > > > > > tree,
> > > > > > > > >
> > > > > > > > > + // pick the smallest between the locked value and this
> value;
> > > > to
> > > > > > set
> > > > > > > > >
> > > > > > > > > + // across entire PCI tree nodes
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + MrrsValue = MIN (
> > > > > > > > >
> > > > > > > > > + MrrsValue,
> > > > > > > > >
> > > > > > > > > + PciFeaturesConfigurationTable-
> > > > >Max_Read_Request_Size
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + PciFeaturesConfigurationTable-
> >Max_Read_Request_Size =
> > > > > > > > > MrrsValue;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // align this device's Max_Read_Request_Size to derived
> > > > > > configuration
> > > > > > > > > value
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMRRS = MrrsValue;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // align the Max_Read_Request_Size of the PCI tree based
> on 3
> > > > > > > > conditions:
> > > > > > > > >
> > > > > > > > > + // first, if user defines MRRS for any one PCI device in the
> tree
> > > > than
> > > > > > align
> > > > > > > > >
> > > > > > > > > + // all the devices in the PCI tree.
> > > > > > > > >
> > > > > > > > > + // second, if user override is not define for this PCI tree than
> > > > setup
> > > > > > the
> > > > > > > > > MRRS
> > > > > > > > >
> > > > > > > > > + // based on MPS value of the tree to meet the criteria for
> the
> > > > > > > > isochronous
> > > > > > > > >
> > > > > > > > > + // traffic.
> > > > > > > > >
> > > > > > > > > + // third, if no user override, or platform firmware policy has
> not
> > > > > > selected
> > > > > > > > >
> > > > > > > > > + // this PCI bus driver to configure the MPS; than configure
> the
> > > > MRRS
> > > > > > to a
> > > > > > > > >
> > > > > > > > > + // highest common value of PCI device capability for the
> MPS
> > > > found
> > > > > > > > among
> > > > > > > > > all
> > > > > > > > >
> > > > > > > > > + // the PCI devices in this tree
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( PciFeaturesConfigurationTable) {
> > > > > > > > >
> > > > > > > > > + if ( PciFeaturesConfigurationTable-
> > > > >Lock_Max_Read_Request_Size)
> > > > > > {
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMRRS = PciFeaturesConfigurationTable-
> > > > > > > > > >Max_Read_Request_Size;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + if ( SetupMaxPayloadSize()) {
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMRRS = PciDevice->SetupMPS;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMRRS = MIN (
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMRRS,
> > > > > > > > >
> > > > > > > > > + PciFeaturesConfigurationTable-
> > > > > > > > >Max_Read_Request_Size
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + PciFeaturesConfigurationTable-
> >Max_Read_Request_Size =
> > > > > > > > PciDevice-
> > > > > > > > > >SetupMRRS;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "Max_Read_Request_Size: %d\n",
> > > > > > PciDevice-
> > > > > > > > > >SetupMRRS));
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Overrides the PCI Device Control register MaxPayloadSize
> register
> > > > > > field;
> > > > > > > > if
> > > > > > > > >
> > > > > > > > > + the hardware value is different than the intended value.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to the PCI_IO_DEVICE
> > > > instance.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS The data was read from or
> written to
> > > > the
> > > > > > PCI
> > > > > > > > > device.
> > > > > > > > >
> > > > > > > > > + @retval EFI_UNSUPPORTED The address range specified
> by
> > > > Offset,
> > > > > > > > > Width, and Count is not
> > > > > > > > >
> > > > > > > > > + valid for the PCI configuration header of the
> PCI
> > > > > > > controller.
> > > > > > > > >
> > > > > > > > > + @retval EFI_INVALID_PARAMETER Buffer is NULL or Width
> is
> > > > invalid.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +OverrideMaxPayloadSize (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + PCI_REG_PCIE_DEVICE_CONTROL PcieDev;
> > > > > > > > >
> > > > > > > > > + UINT32 Offset;
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + PcieDev.Uint16 = 0;
> > > > > > > > >
> > > > > > > > > + Offset = PciDevice->PciExpressCapabilityOffset +
> > > > > > > > >
> > > > > > > > > + OFFSET_OF (PCI_CAPABILITY_PCIEXP, DeviceControl);
> > > > > > > > >
> > > > > > > > > + Status = PciDevice->PciIo.Pci.Read (
> > > > > > > > >
> > > > > > > > > + &PciDevice->PciIo,
> > > > > > > > >
> > > > > > > > > + EfiPciIoWidthUint16,
> > > > > > > > >
> > > > > > > > > + Offset,
> > > > > > > > >
> > > > > > > > > + 1,
> > > > > > > > >
> > > > > > > > > + &PcieDev.Uint16
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + if ( EFI_ERROR(Status)){
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_ERROR, "Unexpected DeviceControl
> register
> > > > > > (0x%x)
> > > > > > > > > read error!",
> > > > > > > > >
> > > > > > > > > + Offset
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + if ( PcieDev.Bits.MaxPayloadSize != PciDevice->SetupMPS) {
> > > > > > > > >
> > > > > > > > > + PcieDev.Bits.MaxPayloadSize = PciDevice->SetupMPS;
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "Max_Payload_Size=%d,",
> PciDevice-
> > > > > > > > > >SetupMPS));
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Status = PciDevice->PciIo.Pci.Write (
> > > > > > > > >
> > > > > > > > > + &PciDevice->PciIo,
> > > > > > > > >
> > > > > > > > > + EfiPciIoWidthUint16,
> > > > > > > > >
> > > > > > > > > + Offset,
> > > > > > > > >
> > > > > > > > > + 1,
> > > > > > > > >
> > > > > > > > > + &PcieDev.Uint16
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + if ( !EFI_ERROR(Status)) {
> > > > > > > > >
> > > > > > > > > + PciDevice->PciExpStruct.DeviceControl.Uint16 =
> > PcieDev.Uint16;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_ERROR, "Unexpected DeviceControl
> register
> > > > > > (0x%x)
> > > > > > > > > write error!",
> > > > > > > > >
> > > > > > > > > + Offset
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "No write of
> Max_Payload_Size=%d,",
> > > > > > > > PciDevice-
> > > > > > > > > >SetupMPS));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Overrides the PCI Device Control register MaxPayloadSize
> register
> > > > > > field;
> > > > > > > > if
> > > > > > > > >
> > > > > > > > > + the hardware value is different than the intended value.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to the PCI_IO_DEVICE
> > > > instance.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS The data was read from or
> written to
> > > > the
> > > > > > PCI
> > > > > > > > > controller.
> > > > > > > > >
> > > > > > > > > + @retval EFI_UNSUPPORTED The address range specified
> by
> > > > Offset,
> > > > > > > > > Width, and Count is not
> > > > > > > > >
> > > > > > > > > + valid for the PCI configuration header of the
> PCI
> > > > > > > controller.
> > > > > > > > >
> > > > > > > > > + @retval EFI_INVALID_PARAMETER Buffer is NULL or Width
> is
> > > > invalid.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +OverrideMaxReadReqSize (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + PCI_REG_PCIE_DEVICE_CONTROL PcieDev;
> > > > > > > > >
> > > > > > > > > + UINT32 Offset;
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + PcieDev.Uint16 = 0;
> > > > > > > > >
> > > > > > > > > + Offset = PciDevice->PciExpressCapabilityOffset +
> > > > > > > > >
> > > > > > > > > + OFFSET_OF (PCI_CAPABILITY_PCIEXP, DeviceControl);
> > > > > > > > >
> > > > > > > > > + Status = PciDevice->PciIo.Pci.Read (
> > > > > > > > >
> > > > > > > > > + &PciDevice->PciIo,
> > > > > > > > >
> > > > > > > > > + EfiPciIoWidthUint16,
> > > > > > > > >
> > > > > > > > > + Offset,
> > > > > > > > >
> > > > > > > > > + 1,
> > > > > > > > >
> > > > > > > > > + &PcieDev.Uint16
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + if ( EFI_ERROR(Status)){
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_ERROR, "Unexpected DeviceControl
> register
> > > > > > (0x%x)
> > > > > > > > > read error!",
> > > > > > > > >
> > > > > > > > > + Offset
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + if ( PcieDev.Bits.MaxReadRequestSize != PciDevice-
> >SetupMRRS)
> > > > {
> > > > > > > > >
> > > > > > > > > + PcieDev.Bits.MaxReadRequestSize = PciDevice-
> >SetupMRRS;
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "Max_Read_Request_Size: %d\n",
> > > > > > PciDevice-
> > > > > > > > > >SetupMRRS));
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Status = PciDevice->PciIo.Pci.Write (
> > > > > > > > >
> > > > > > > > > + &PciDevice->PciIo,
> > > > > > > > >
> > > > > > > > > + EfiPciIoWidthUint16,
> > > > > > > > >
> > > > > > > > > + Offset,
> > > > > > > > >
> > > > > > > > > + 1,
> > > > > > > > >
> > > > > > > > > + &PcieDev.Uint16
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + if ( !EFI_ERROR(Status)) {
> > > > > > > > >
> > > > > > > > > + PciDevice->PciExpStruct.DeviceControl.Uint16 =
> > PcieDev.Uint16;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_ERROR, "Unexpected DeviceControl
> register
> > > > > > (0x%x)
> > > > > > > > > write error!",
> > > > > > > > >
> > > > > > > > > + Offset
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "No write of
> > > > > > Max_Read_Request_Size=%d\n",
> > > > > > > > > PciDevice->SetupMRRS));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + helper routine to dump the PCIe Device Port Type
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +VOID
> > > > > > > > >
> > > > > > > > > +DumpDevicePortType (
> > > > > > > > >
> > > > > > > > > + IN UINT8 DevicePortType
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + switch ( DevicePortType){
> > > > > > > > >
> > > > > > > > > + case PCIE_DEVICE_PORT_TYPE_PCIE_ENDPOINT:
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "PCIe endpoint found\n"));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > + case PCIE_DEVICE_PORT_TYPE_LEGACY_PCIE_ENDPOINT:
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "legacy PCI endpoint found\n"));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > + case PCIE_DEVICE_PORT_TYPE_ROOT_PORT:
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "PCIe Root Port found\n"));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > + case PCIE_DEVICE_PORT_TYPE_UPSTREAM_PORT:
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "PCI switch upstream port
> found\n"));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > + case PCIE_DEVICE_PORT_TYPE_DOWNSTREAM_PORT:
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "PCI switch downstream port
> > > > found\n"));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > + case PCIE_DEVICE_PORT_TYPE_PCIE_TO_PCI_BRIDGE:
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "PCIe-PCI bridge found\n"));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > + case PCIE_DEVICE_PORT_TYPE_PCI_TO_PCIE_BRIDGE:
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "PCI-PCIe bridge found\n"));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > + case
> > > > > > > > >
> > > > PCIE_DEVICE_PORT_TYPE_ROOT_COMPLEX_INTEGRATED_ENDPOINT:
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "RCiEP found\n"));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > + case
> > > > > > PCIE_DEVICE_PORT_TYPE_ROOT_COMPLEX_EVENT_COLLECTOR:
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "RC Event Collector found\n"));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Process each PCI device as per the pltaform and device-
> specific
> > > > > > policy.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS processing each PCI feature as
> per
> > > > policy
> > > > > > > > > defined
> > > > > > > > >
> > > > > > > > > + was successful.
> > > > > > > > >
> > > > > > > > > + **/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +SetupDevicePciFeatures (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice,
> > > > > > > > >
> > > > > > > > > + IN PCI_FEATURE_CONFIGURATION_PHASE PciConfigPhase
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > + PCI_REG_PCIE_CAPABILITY PcieCap;
> > > > > > > > >
> > > > > > > > > + OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > > *OtherPciFeaturesConfigTable;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + PcieCap.Uint16 = PciDevice->PciExpStruct.Capability.Uint16;
> > > > > > > > >
> > > > > > > > > + DumpDevicePortType
> ( (UINT8)PcieCap.Bits.DevicePortType);
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + OtherPciFeaturesConfigTable = NULL;
> > > > > > > > >
> > > > > > > > > + Status = GetPciFeaturesConfigurationTable ( PciDevice,
> > > > > > > > > &OtherPciFeaturesConfigTable);
> > > > > > > > >
> > > > > > > > > + if ( EFI_ERROR( Status)) {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + EFI_D_WARN, "No primary root port found in these root
> > > > bridge
> > > > > > > > > nodes!\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + } else if ( !OtherPciFeaturesConfigTable) {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "No PCI features config. table for this
> > > > device!\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "using PCI features config. table ID: %d\n",
> > > > > > > > >
> > > > > > > > > + OtherPciFeaturesConfigTable->ID
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( PciConfigPhase == PciFeatureGetDevicePolicy) {
> > > > > > > > >
> > > > > > > > > + Status = GetPciDevicePlatformPolicy ( PciDevice);
> > > > > > > > >
> > > > > > > > > + if ( EFI_ERROR(Status)) {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_ERROR, "Error in obtaining PCI device
> policy!!!\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( SetupMaxPayloadSize ()) {
> > > > > > > > >
> > > > > > > > > + Status = ProcessMaxPayloadSize (
> > > > > > > > >
> > > > > > > > > + PciDevice,
> > > > > > > > >
> > > > > > > > > + PciConfigPhase,
> > > > > > > > >
> > > > > > > > > + OtherPciFeaturesConfigTable
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // implementation specific rule:- the MRRS of any PCI device
> > > > should
> > > > > > be
> > > > > > > > > processed
> > > > > > > > >
> > > > > > > > > + // only after the MPS is processed for that device
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( SetupMaxReadReqSize ()) {
> > > > > > > > >
> > > > > > > > > + Status = ProcessMaxReadReqSize (
> > > > > > > > >
> > > > > > > > > + PciDevice,
> > > > > > > > >
> > > > > > > > > + PciConfigPhase,
> > > > > > > > >
> > > > > > > > > + OtherPciFeaturesConfigTable
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Traverse all the nodes from the root bridge or PCI-PCI bridge
> > > > instance,
> > > > > > to
> > > > > > > > >
> > > > > > > > > + configure the PCI features as per the device-specific
> platform
> > > > policy,
> > > > > > and
> > > > > > > > >
> > > > > > > > > + as per the device capability, as applicable.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS Traversing all the nodes of the
> root
> > > > bridge
> > > > > > > > >
> > > > > > > > > + instances were successfull.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +SetupPciFeatures (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge,
> > > > > > > > >
> > > > > > > > > + IN PCI_FEATURE_CONFIGURATION_PHASE PciConfigPhase
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PCI_IO_DEVICE *Device;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + for ( Link = RootBridge->ChildList.ForwardLink
> > > > > > > > >
> > > > > > > > > + ; Link != &RootBridge->ChildList
> > > > > > > > >
> > > > > > > > > + ; Link = Link->ForwardLink
> > > > > > > > >
> > > > > > > > > + ) {
> > > > > > > > >
> > > > > > > > > + Device = PCI_IO_DEVICE_FROM_LINK (Link);
> > > > > > > > >
> > > > > > > > > + if (IS_PCI_BRIDGE (&Device->Pci)) {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "::Bridge [%02x|%02x|%02x] -",
> > > > > > > > >
> > > > > > > > > + Device->BusNumber, Device->DeviceNumber, Device-
> > > > > > > > > >FunctionNumber
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + if (Device->IsPciExp) {
> > > > > > > > >
> > > > > > > > > + Status = SetupDevicePciFeatures ( Device,
> PciConfigPhase);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "Not a PCIe capable device!\n"));
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // PCI Bridge which does not have PCI Express Capability
> > > > structure
> > > > > > > > >
> > > > > > > > > + // cannot process this kind of PCI Bridge device
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + SetupPciFeatures ( Device, PciConfigPhase);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "::Device [%02x|%02x|%02x] -",
> > > > > > > > >
> > > > > > > > > + Device->BusNumber, Device->DeviceNumber, Device-
> > > > > > > > > >FunctionNumber
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + if (Device->IsPciExp) {
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Status = SetupDevicePciFeatures ( Device,
> PciConfigPhase);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "Not a PCIe capable device!\n"));
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // PCI Device which does not have PCI Express Capability
> > > > structure
> > > > > > > > >
> > > > > > > > > + // cannot process this kind of PCI device
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Program the PCI device, to override the PCI features as per
> the
> > > > policy,
> > > > > > > > >
> > > > > > > > > + resolved from previous traverse.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS The other PCI features
> configuration
> > > > > > during
> > > > > > > > > enumeration
> > > > > > > > >
> > > > > > > > > + of all the nodes of the PCI root bridge
> instance
> > > > were
> > > > > > > > >
> > > > > > > > > + programmed in PCI-compliance pattern along
> > with
> > > > the
> > > > > > > > >
> > > > > > > > > + device-specific policy, as applicable.
> > > > > > > > >
> > > > > > > > > + @retval EFI_UNSUPPORTED One of the override
> operation
> > > > maong
> > > > > > the
> > > > > > > > > nodes of
> > > > > > > > >
> > > > > > > > > + the PCI hierarchy resulted in a incompatible
> > > > address
> > > > > > > > >
> > > > > > > > > + range.
> > > > > > > > >
> > > > > > > > > + @retval EFI_INVALID_PARAMETER The override operation is
> > > > > > performed
> > > > > > > > > with invalid input
> > > > > > > > >
> > > > > > > > > + parameters.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +ProgramDevicePciFeatures (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( SetupMaxPayloadSize ()) {
> > > > > > > > >
> > > > > > > > > + Status = OverrideMaxPayloadSize (PciDevice);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + if ( SetupMaxReadReqSize ()) {
> > > > > > > > >
> > > > > > > > > + Status = OverrideMaxReadReqSize (PciDevice);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Program all the nodes of the specified root bridge or PCI-PCI
> > > > Bridge,
> > > > > > to
> > > > > > > > >
> > > > > > > > > + override the PCI features.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS The other PCI features
> configuration
> > > > > > during
> > > > > > > > > enumeration
> > > > > > > > >
> > > > > > > > > + of all the nodes of the PCI root bridge
> instance
> > > > were
> > > > > > > > >
> > > > > > > > > + programmed in PCI-compliance pattern along
> > with
> > > > the
> > > > > > > > >
> > > > > > > > > + device-specific policy, as applicable.
> > > > > > > > >
> > > > > > > > > + @retval EFI_UNSUPPORTED One of the override
> operation
> > > > maong
> > > > > > the
> > > > > > > > > nodes of
> > > > > > > > >
> > > > > > > > > + the PCI hierarchy resulted in a incompatible
> > > > address
> > > > > > > > >
> > > > > > > > > + range.
> > > > > > > > >
> > > > > > > > > + @retval EFI_INVALID_PARAMETER The override operation is
> > > > > > performed
> > > > > > > > > with invalid input
> > > > > > > > >
> > > > > > > > > + parameters.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +ProgramPciFeatures (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PCI_IO_DEVICE *Device;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + for ( Link = RootBridge->ChildList.ForwardLink
> > > > > > > > >
> > > > > > > > > + ; Link != &RootBridge->ChildList
> > > > > > > > >
> > > > > > > > > + ; Link = Link->ForwardLink
> > > > > > > > >
> > > > > > > > > + ) {
> > > > > > > > >
> > > > > > > > > + Device = PCI_IO_DEVICE_FROM_LINK (Link);
> > > > > > > > >
> > > > > > > > > + if (IS_PCI_BRIDGE (&Device->Pci)) {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "::Bridge [%02x|%02x|%02x] -",
> > > > > > > > >
> > > > > > > > > + Device->BusNumber, Device->DeviceNumber, Device-
> > > > > > > > > >FunctionNumber
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + if (Device->IsPciExp) {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "ready to override!\n"));
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Status = ProgramDevicePciFeatures ( Device);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "skipped!\n"));
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // PCI Bridge which does not have PCI Express Capability
> > > > structure
> > > > > > > > >
> > > > > > > > > + // cannot process this kind of PCI Bridge device
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Status = ProgramPciFeatures ( Device);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "::Device [%02x|%02x|%02x] -",
> > > > > > > > >
> > > > > > > > > + Device->BusNumber, Device->DeviceNumber, Device-
> > > > > > > > > >FunctionNumber
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + if (Device->IsPciExp) {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "ready to override!\n"));
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Status = ProgramDevicePciFeatures ( Device);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG (( DEBUG_INFO, "skipped!\n"));
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // PCI Device which does not have PCI Express Capability
> > > > structure
> > > > > > > > >
> > > > > > > > > + // cannot process this kind of PCI device
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Create a node of type PRIMARY_ROOT_PORT_NODE for the
> > > > given
> > > > > > PCI
> > > > > > > > > device, and
> > > > > > > > >
> > > > > > > > > + assigns EFI handles of its Root Bridge and its own, along with
> its
> > > > PCI
> > > > > > Bus
> > > > > > > > >
> > > > > > > > > + range for the secondary and subordinate bus range.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE
> for its
> > > > PCI
> > > > > > Root
> > > > > > > > > Bridge
> > > > > > > > >
> > > > > > > > > + @param Device A pointer to the PCI_IO_DEVICE for
> the
> > > > PCI
> > > > > > > > > controller
> > > > > > > > >
> > > > > > > > > + @param RootPortSecBus PCI controller's Secondary Bus
> > > > number
> > > > > > > > >
> > > > > > > > > + @param RootPortSubBus PCI controller's Subordinate
> Bus
> > > > number
> > > > > > > > >
> > > > > > > > > + @param PrimaryRootPortNode A pointer to the
> > > > > > > > > PRIMARY_ROOT_PORT_NODE to return
> > > > > > > > >
> > > > > > > > > + the newly created node for the PCI controller.
> In
> > > > > > > > >
> > > > > > > > > + case of error nothing is return in this.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS new node of
> > > > > > PRIMARY_ROOT_PORT_NODE is
> > > > > > > > > returned for
> > > > > > > > >
> > > > > > > > > + the PCI controller
> > > > > > > > >
> > > > > > > > > + EFI_OUT_OF_RESOURCES unable to create the node for
> the
> > > > PCI
> > > > > > > > > controller
> > > > > > > > >
> > > > > > > > > + EFI_INVALID_PARAMETER unable to store the node as
> the
> > > > input
> > > > > > > > > buffer is
> > > > > > > > >
> > > > > > > > > + not empty (*PrimaryRootPortNode)
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +CreatePrimaryPciRootPortNode (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge,
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *Device,
> > > > > > > > >
> > > > > > > > > + IN UINT8 RootPortSecBus,
> > > > > > > > >
> > > > > > > > > + IN UINT8 RootPortSubBus,
> > > > > > > > >
> > > > > > > > > + OUT PRIMARY_ROOT_PORT_NODE
> **PrimaryRootPortNode
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + PRIMARY_ROOT_PORT_NODE *RootPortNode = NULL;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( !*PrimaryRootPortNode) {
> > > > > > > > >
> > > > > > > > > + RootPortNode = AllocateZeroPool ( sizeof
> > > > > > > > > (PRIMARY_ROOT_PORT_NODE));
> > > > > > > > >
> > > > > > > > > + if ( RootPortNode == NULL) {
> > > > > > > > >
> > > > > > > > > + return EFI_OUT_OF_RESOURCES;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + RootPortNode->Signature =
> PCI_ROOT_PORT_SIGNATURE;
> > > > > > > > >
> > > > > > > > > + RootPortNode->RootBridgeHandle = RootBridge->Handle;
> > > > > > > > >
> > > > > > > > > + RootPortNode->RootPortHandle = Device->Handle;
> > > > > > > > >
> > > > > > > > > + RootPortNode->SecondaryBusStart = RootPortSecBus;
> > > > > > > > >
> > > > > > > > > + RootPortNode->SecondaryBusEnd = RootPortSubBus;
> > > > > > > > >
> > > > > > > > > + InitializeListHead ( &RootPortNode->NeighborRootPort);
> > > > > > > > >
> > > > > > > > > + *PrimaryRootPortNode = RootPortNode;
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + return EFI_INVALID_PARAMETER;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Checks to report whether the input PCI controller's
> secondary /
> > > > > > > > > subordinate
> > > > > > > > >
> > > > > > > > > + bus numbers are within the recorded list of other PCI
> controllers
> > > > > > (root
> > > > > > > > > ports).
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootPortNode A pointer to the first node of
> > > > > > > > > PRIMARY_ROOT_PORT_NODE
> > > > > > > > >
> > > > > > > > > + @param RootPortSecBus PCI secondary bus number of
> the PCI
> > > > > > > > controller
> > > > > > > > > found
> > > > > > > > >
> > > > > > > > > + @param RootPortSubBus PCI subordinate bus number of
> the
> > > > PCI
> > > > > > Root
> > > > > > > > > Port found
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE A child PCI Root port found
> > > > > > > > >
> > > > > > > > > + FALSE A new PCI controller found
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +CheckChildRootPort (
> > > > > > > > >
> > > > > > > > > + IN PRIMARY_ROOT_PORT_NODE *RootPortNode,
> > > > > > > > >
> > > > > > > > > + IN UINT8 RootPortSecBus,
> > > > > > > > >
> > > > > > > > > + IN UINT8 RootPortSubBus
> > > > > > > > >
> > > > > > > > > +)
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PRIMARY_ROOT_PORT_NODE *Temp;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( !RootPortNode) {
> > > > > > > > >
> > > > > > > > > + return FALSE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Link = &RootPortNode->NeighborRootPort;
> > > > > > > > >
> > > > > > > > > + do {
> > > > > > > > >
> > > > > > > > > + Temp = PRIMARY_ROOT_PORT_NODE_FROM_LINK ( Link);
> > > > > > > > >
> > > > > > > > > + if ( RootPortSecBus >= Temp->SecondaryBusStart
> > > > > > > > >
> > > > > > > > > + && RootPortSubBus <= Temp->SecondaryBusEnd) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // given root port's secondary & subordinate within its
> primary
> > > > > > ports
> > > > > > > > >
> > > > > > > > > + // hence return as child port
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Link = Link->ForwardLink;
> > > > > > > > >
> > > > > > > > > + } while (Link != &RootPortNode->NeighborRootPort);
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // the given root port's secondary / subordinate bus
> numbers do
> > > > not
> > > > > > > > > belong to
> > > > > > > > >
> > > > > > > > > + // any existing primary root port's bus range hence consider
> > > > another
> > > > > > > > > primary
> > > > > > > > >
> > > > > > > > > + // root port of the root bridge controller
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return FALSE;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Create the vector of PCI Feature configuration table as per
> the
> > > > > > number
> > > > > > > > of
> > > > > > > > >
> > > > > > > > > + the PCI Root Ports given, assigns default value to the PCI
> features
> > > > > > > > > supported
> > > > > > > > >
> > > > > > > > > + and assign its address to the global variable
> > > > > > > > > "mPciFeaturesConfigurationTableInstances".
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param NumberOfRootPorts An input arguement of
> UINTN to
> > > > > > indicate
> > > > > > > > > number of
> > > > > > > > >
> > > > > > > > > + primary PCI physical Root Bridge devices found
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_OUT_OF_RESOURCES unable to allocate buffer
> to
> > > > store
> > > > > > PCI
> > > > > > > > > feature
> > > > > > > > >
> > > > > > > > > + configuration table for all the physical PCI
> root
> > > > > > > > >
> > > > > > > > > + ports given
> > > > > > > > >
> > > > > > > > > + EFI_SUCCESS PCI Feature COnfiguration table
> created
> > for
> > > > all
> > > > > > > > >
> > > > > > > > > + the PCI Rooot ports reported
> > > > > > > > >
> > > > > > > > > + */
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +CreatePciFeaturesConfigurationTableInstances (
> > > > > > > > >
> > > > > > > > > + IN UINTN NumberOfRootPorts
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > > *PciRootBridgePortFeatures = NULL;
> > > > > > > > >
> > > > > > > > > + UINTN Instances;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + PciRootBridgePortFeatures = AllocateZeroPool (
> > > > > > > > >
> > > > > > > > > + sizeof
> > > > > > ( OTHER_PCI_FEATURES_CONFIGURATION_TABLE)
> > > > > > > > *
> > > > > > > > > NumberOfRootPorts
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + if ( !PciRootBridgePortFeatures) {
> > > > > > > > >
> > > > > > > > > + return EFI_OUT_OF_RESOURCES;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + for ( Instances = 0; Instances < NumberOfRootPorts;
> Instances++)
> > > > {
> > > > > > > > >
> > > > > > > > > + PciRootBridgePortFeatures [Instances].ID =
> Instances
> > +
> > > > 1;
> > > > > > > > >
> > > > > > > > > + PciRootBridgePortFeatures [Instances].Max_Payload_Size
> =
> > > > > > > > > PCIE_MAX_PAYLOAD_SIZE_4096B;
> > > > > > > > >
> > > > > > > > > + PciRootBridgePortFeatures
> > > > [Instances].Max_Read_Request_Size =
> > > > > > > > > PCIE_MAX_READ_REQ_SIZE_4096B;
> > > > > > > > >
> > > > > > > > > + PciRootBridgePortFeatures
> > > > > > [Instances].Lock_Max_Read_Request_Size
> > > > > > > > =
> > > > > > > > > FALSE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + mPciFeaturesConfigurationTableInstances =
> > > > > > PciRootBridgePortFeatures;
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This routine pairs the each PCI Root Port node with one of
> the PCI
> > > > > > > > Feature
> > > > > > > > >
> > > > > > > > > + Configuration Table node. Each physical PCI Root Port has its
> > own
> > > > PCI
> > > > > > > > > feature
> > > > > > > > >
> > > > > > > > > + configuration table which will used for aligning all its
> downstream
> > > > > > > > > components.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param NumberOfRootPorts inputs the number of
> physical
> > > > PCI
> > > > > > root
> > > > > > > > > ports
> > > > > > > > >
> > > > > > > > > + found on the Root bridge instance
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_INVALID_PARAMETER if the primary PCI root
> ports
> > > > list is
> > > > > > > > > vacant when
> > > > > > > > >
> > > > > > > > > + there is one or more PCI Root port indicated
> as
> > per
> > > > > > > > >
> > > > > > > > > + input parameter
> > > > > > > > >
> > > > > > > > > + EFI_UNSUPPORTED The PCI Root Port nodes not
> paired
> > > > > > equally
> > > > > > > > with
> > > > > > > > >
> > > > > > > > > + the PCI Configuration Table nodes
> > > > > > > > >
> > > > > > > > > + EFI_SUCCESS each PCI feature configuration node
> is
> > > > paired
> > > > > > > > > equally
> > > > > > > > >
> > > > > > > > > + with each PCI Root port in the list
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +AssignPciFeaturesConfigurationTable (
> > > > > > > > >
> > > > > > > > > + IN UINTN NumberOfRootPorts
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + UINTN Instances;
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PRIMARY_ROOT_PORT_NODE *Temp;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( !mPrimaryRootPortList
> > > > > > > > >
> > > > > > > > > + && NumberOfRootPorts) {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_ERROR,
> > > > > > > > >
> > > > > > > > > + "Critical error! no internal table setup for %d PCI Root
> ports
> > \n",
> > > > > > > > >
> > > > > > > > > + NumberOfRootPorts
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + return EFI_INVALID_PARAMETER;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( NumberOfRootPorts) {
> > > > > > > > >
> > > > > > > > > + Link = &mPrimaryRootPortList->NeighborRootPort;
> > > > > > > > >
> > > > > > > > > + for ( Instances = 0
> > > > > > > > >
> > > > > > > > > + ; (Instances < NumberOfRootPorts)
> > > > > > > > >
> > > > > > > > > + ; Instances++
> > > > > > > > >
> > > > > > > > > + ) {
> > > > > > > > >
> > > > > > > > > + Temp = PRIMARY_ROOT_PORT_NODE_FROM_LINK ( Link);
> > > > > > > > >
> > > > > > > > > + Temp->OtherPciFeaturesConfigurationTable =
> > > > > > > > > &mPciFeaturesConfigurationTableInstances [Instances];
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO,
> > > > > > > > >
> > > > > > > > > + "Assigned to %dth primary root port\n",
> > > > > > > > >
> > > > > > > > > + Instances
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Link = Link->ForwardLink;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + if ( Link != &mPrimaryRootPortList->NeighborRootPort) {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_ERROR,
> > > > > > > > >
> > > > > > > > > + "Error!! PCI Root Port list is not properly matched with
> > Config.,
> > > > > > Table
> > > > > > > > > list \n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + return EFI_UNSUPPORTED;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Prepare each PCI Controller (Root Port) with its own PCI
> Feature
> > > > > > > > > configuration
> > > > > > > > >
> > > > > > > > > + table node that can be used for tracking to align all PCI
> nodes in
> > its
> > > > > > > > > hierarchy.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PrimaryRootPorts A pointer to
> > > > > > PRIMARY_ROOT_PORT_NODE
> > > > > > > > >
> > > > > > > > > + @param NumberOfRootPorts Total number of pysical
> primary
> > > > PCI
> > > > > > > > Root
> > > > > > > > > ports
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_OUT_OF_RESOURCES unable to allocate buffer
> to
> > > > store
> > > > > > PCI
> > > > > > > > > feature
> > > > > > > > >
> > > > > > > > > + configuration table for all the physical PCI
> root
> > > > > > > > >
> > > > > > > > > + ports given
> > > > > > > > >
> > > > > > > > > + EFI_INVALID_PARAMETER if the primary PCI root ports
> list is
> > > > > > vacant
> > > > > > > > > when
> > > > > > > > >
> > > > > > > > > + there is one or more PCI Root port indicated
> as
> > per
> > > > > > > > >
> > > > > > > > > + input parameter
> > > > > > > > >
> > > > > > > > > + EFI_UNSUPPORTED The PCI Root Port nodes not
> paired
> > > > > > equally
> > > > > > > > with
> > > > > > > > >
> > > > > > > > > + the PCI Configuration Table nodes
> > > > > > > > >
> > > > > > > > > + EFI_SUCCESS each PCI feature configuration node
> is
> > > > paired
> > > > > > > > > equally
> > > > > > > > >
> > > > > > > > > + with each PCI Root port in the list
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +PreparePciControllerConfigurationTable (
> > > > > > > > >
> > > > > > > > > + IN PRIMARY_ROOT_PORT_NODE *PrimaryRootPorts,
> > > > > > > > >
> > > > > > > > > + IN UINTN NumberOfRootPorts
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + mPrimaryRootPortList = PrimaryRootPorts;
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "Number of primary Root Ports found on
> this
> > > > bridge
> > > > > > > > > = %d\n",
> > > > > > > > >
> > > > > > > > > + NumberOfRootPorts
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Status = CreatePciFeaturesConfigurationTableInstances
> > > > > > > > > ( NumberOfRootPorts);
> > > > > > > > >
> > > > > > > > > + if ( EFI_ERROR(Status)) {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_ERROR, "Unexpected memory node creation
> error for
> > > > PCI
> > > > > > > > > features!\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // align the primary root port nodes list with the PCI
> Feature
> > > > > > > > configuration
> > > > > > > > >
> > > > > > > > > + // table. Note that the PCI Feature configuration table is
> not
> > > > > > maintain
> > > > > > > > for
> > > > > > > > >
> > > > > > > > > + // the RCiEP devices
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + Status = AssignPciFeaturesConfigurationTable
> > > > > > ( NumberOfRootPorts);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Scan all the nodes of the RootBridge to identify and create a
> > > > separate
> > > > > > list
> > > > > > > > >
> > > > > > > > > + of all primary physical PCI root ports and link each with its
> own
> > > > > > instance
> > > > > > > > of
> > > > > > > > >
> > > > > > > > > + the PCI Feature Configuration Table.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE of
> the PCI
> > > > > > Root
> > > > > > > > > Bridge
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_OUT_OF_RESOURCES unable to allocate buffer
> to
> > > > store
> > > > > > PCI
> > > > > > > > > feature
> > > > > > > > >
> > > > > > > > > + configuration table for all the physical PCI
> root
> > > > > > > > >
> > > > > > > > > + ports given
> > > > > > > > >
> > > > > > > > > + EFI_NOT_FOUND No PCI Bridge device found
> > > > > > > > >
> > > > > > > > > + EFI_SUCCESS PCI Feature COnfiguration table
> created
> > for
> > > > all
> > > > > > > > >
> > > > > > > > > + the PCI Rooot ports found
> > > > > > > > >
> > > > > > > > > + EFI_INVALID_PARAMETER invalid parameter passed to
> the
> > > > > > routine
> > > > > > > > > which
> > > > > > > > >
> > > > > > > > > + creates the PCI controller node for the
> primary
> > > > > > > > >
> > > > > > > > > + Root post list
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +RecordPciRootPortBridges (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status = EFI_NOT_FOUND;
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PCI_IO_DEVICE *Device;
> > > > > > > > >
> > > > > > > > > + UINTN NumberOfRootPorts;
> > > > > > > > >
> > > > > > > > > + PRIMARY_ROOT_PORT_NODE *PrimaryRootPorts,
> > > > > > > > >
> > > > > > > > > + *TempNode;
> > > > > > > > >
> > > > > > > > > + UINT8 RootPortSecBus,
> > > > > > > > >
> > > > > > > > > + RootPortSubBus;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "<<********** RecordPciRootPortBridges
> -
> > > > start
> > > > > > > > > *************>>\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + NumberOfRootPorts = 0;
> > > > > > > > >
> > > > > > > > > + PrimaryRootPorts = NULL;
> > > > > > > > >
> > > > > > > > > + for ( Link = RootBridge->ChildList.ForwardLink
> > > > > > > > >
> > > > > > > > > + ; Link != &RootBridge->ChildList
> > > > > > > > >
> > > > > > > > > + ; Link = Link->ForwardLink
> > > > > > > > >
> > > > > > > > > + ) {
> > > > > > > > >
> > > > > > > > > + Device = PCI_IO_DEVICE_FROM_LINK (Link);
> > > > > > > > >
> > > > > > > > > + if (IS_PCI_BRIDGE (&Device->Pci)) {
> > > > > > > > >
> > > > > > > > > + Status = GetPciRootPortBusAssigned (
> > > > > > > > >
> > > > > > > > > + Device,
> > > > > > > > >
> > > > > > > > > + NULL,
> > > > > > > > >
> > > > > > > > > + &RootPortSecBus,
> > > > > > > > >
> > > > > > > > > + &RootPortSubBus
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + if ( !EFI_ERROR(Status)) {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "::Device [%02x|%02x|%02x] -
> SecBus=0x%x,
> > > > > > > > > SubBus=0x%x\n",
> > > > > > > > >
> > > > > > > > > + Device->BusNumber, Device->DeviceNumber, Device-
> > > > > > > > > >FunctionNumber,
> > > > > > > > >
> > > > > > > > > + RootPortSecBus, RootPortSubBus
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_ERROR, "Unexpected read error
> [0x%lx]::Device
> > > > > > > > > [%02x|%02x|%02x]\n",
> > > > > > > > >
> > > > > > > > > + Status, Device->BusNumber, Device->DeviceNumber,
> > > > Device-
> > > > > > > > > >FunctionNumber
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + RootPortSecBus = RootPortSubBus = 0;
> > > > > > > > >
> > > > > > > > > + continue;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( !PrimaryRootPorts) {
> > > > > > > > >
> > > > > > > > > + NumberOfRootPorts++;
> > > > > > > > >
> > > > > > > > > + Status = CreatePrimaryPciRootPortNode (
> > > > > > > > >
> > > > > > > > > + RootBridge,
> > > > > > > > >
> > > > > > > > > + Device,
> > > > > > > > >
> > > > > > > > > + RootPortSecBus,
> > > > > > > > >
> > > > > > > > > + RootPortSubBus,
> > > > > > > > >
> > > > > > > > > + &PrimaryRootPorts
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + if ( EFI_ERROR(Status)) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // abort mission to scan for all primary roots ports of a
> > bridge
> > > > > > > > >
> > > > > > > > > + // controller if error encountered for very first PCI
> primary
> > > > root
> > > > > > port
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_ERROR, "Unexpected node creation error
> > > > > > [0x%lx]::Device
> > > > > > > > > [%02x|%02x|%02x]\n",
> > > > > > > > >
> > > > > > > > > + Status, Device->BusNumber, Device->DeviceNumber,
> > > > Device-
> > > > > > > > > >FunctionNumber
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "first primary root port found::Device
> > > > > > > > > [%02x|%02x|%02x]\n",
> > > > > > > > >
> > > > > > > > > + Device->BusNumber, Device->DeviceNumber, Device-
> > > > > > > > > >FunctionNumber
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + if ( !CheckChildRootPort ( PrimaryRootPorts,
> RootPortSecBus,
> > > > > > > > > RootPortSubBus)) {
> > > > > > > > >
> > > > > > > > > + NumberOfRootPorts++;
> > > > > > > > >
> > > > > > > > > + TempNode = NULL;
> > > > > > > > >
> > > > > > > > > + Status = CreatePrimaryPciRootPortNode (
> > > > > > > > >
> > > > > > > > > + RootBridge,
> > > > > > > > >
> > > > > > > > > + Device,
> > > > > > > > >
> > > > > > > > > + RootPortSecBus,
> > > > > > > > >
> > > > > > > > > + RootPortSubBus,
> > > > > > > > >
> > > > > > > > > + &TempNode
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + if ( !EFI_ERROR(Status)) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // another primary root port found on the same bridge
> > > > > > controller
> > > > > > > > >
> > > > > > > > > + // insert in the node list
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + InsertTailList ( &PrimaryRootPorts->NeighborRootPort,
> > > > > > > > &TempNode-
> > > > > > > > > >NeighborRootPort);
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "next primary root port found::Device
> > > > > > > > > [%02x|%02x|%02x]\n",
> > > > > > > > >
> > > > > > > > > + Device->BusNumber, Device->DeviceNumber,
> Device-
> > > > > > > > > >FunctionNumber
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_ERROR, "Unexpected node creation error
> > > > > > [0x%lx]::Device
> > > > > > > > > [%02x|%02x|%02x]\n",
> > > > > > > > >
> > > > > > > > > + Status, Device->BusNumber, Device->DeviceNumber,
> > > > Device-
> > > > > > > > > >FunctionNumber
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // prepare the PCI root port and its feature configuration
> table
> > list
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( NumberOfRootPorts) {
> > > > > > > > >
> > > > > > > > > + Status = PreparePciControllerConfigurationTable (
> > > > > > > > >
> > > > > > > > > + PrimaryRootPorts,
> > > > > > > > >
> > > > > > > > > + NumberOfRootPorts
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "No PCI Root port found on this bridge!\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "<<********** RecordPciRootPortBridges
> -
> > > > end
> > > > > > > > > **********>>\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Enumerate all the nodes of the specified root bridge or PCI-
> PCI
> > > > > > Bridge, to
> > > > > > > > >
> > > > > > > > > + configure the other PCI features.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS The other PCI features
> configuration
> > > > > > during
> > > > > > > > > enumeration
> > > > > > > > >
> > > > > > > > > + of all the nodes of the PCI root bridge
> instance
> > > > were
> > > > > > > > >
> > > > > > > > > + programmed in PCI-compliance pattern along
> > with
> > > > the
> > > > > > > > >
> > > > > > > > > + device-specific policy, as applicable.
> > > > > > > > >
> > > > > > > > > + @retval EFI_UNSUPPORTED One of the override
> operation
> > > > maong
> > > > > > the
> > > > > > > > > nodes of
> > > > > > > > >
> > > > > > > > > + the PCI hierarchy resulted in a incompatible
> > > > address
> > > > > > > > >
> > > > > > > > > + range.
> > > > > > > > >
> > > > > > > > > + @retval EFI_INVALID_PARAMETER The override operation is
> > > > > > performed
> > > > > > > > > with invalid input
> > > > > > > > >
> > > > > > > > > + parameters.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +EnumerateOtherPciFeatures (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > + CHAR16 *Str;
> > > > > > > > >
> > > > > > > > > + UINTN OtherPciFeatureConfigPhase;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // check on PCI features configuration is complete and re-
> > > > > > enumeration is
> > > > > > > > > required
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if ( !CheckPciFeaturesConfigurationRequired ( RootBridge)) {
> > > > > > > > >
> > > > > > > > > + return EFI_ALREADY_STARTED;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + Str = ConvertDevicePathToText (
> > > > > > > > >
> > > > > > > > > + DevicePathFromHandle (RootBridge->Handle),
> > > > > > > > >
> > > > > > > > > + FALSE,
> > > > > > > > >
> > > > > > > > > + FALSE
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + DEBUG ((DEBUG_INFO, "Enumerating PCI features for Root
> > > > > > Bridge %s\n",
> > > > > > > > > Str != NULL ? Str : L""));
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + for ( OtherPciFeatureConfigPhase =
> PciFeatureRootBridgeScan
> > > > > > > > >
> > > > > > > > > + ; OtherPciFeatureConfigPhase <=
> > > > > > PciFeatureConfigurationComplete
> > > > > > > > >
> > > > > > > > > + ; OtherPciFeatureConfigPhase++
> > > > > > > > >
> > > > > > > > > + ) {
> > > > > > > > >
> > > > > > > > > + switch ( OtherPciFeatureConfigPhase){
> > > > > > > > >
> > > > > > > > > + case PciFeatureRootBridgeScan:
> > > > > > > > >
> > > > > > > > > + SetupPciFeaturesConfigurationDefaults ();
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + //first scan the entire root bridge heirarchy for the
> primary PCI
> > > > > > root
> > > > > > > > > ports
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + RecordPciRootPortBridges ( RootBridge);
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + case PciFeatureGetDevicePolicy:
> > > > > > > > >
> > > > > > > > > + case PciFeatureSetupPhase:
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "<<********** SetupPciFeatures -
> start
> > > > > > > > > **********>>\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // enumerate the other PCI features
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + Status = SetupPciFeatures ( RootBridge,
> > > > > > OtherPciFeatureConfigPhase);
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "<<********** SetupPciFeatures - end
> > > > > > > > > **********>>\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + case PciFeatureConfigurationPhase:
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // override the PCI features as per enumeration phase
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + DEBUG ((DEBUG_INFO, "PCI features override for Root
> > > > > > Bridge %s\n",
> > > > > > > > > Str != NULL ? Str : L""));
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "<<********** ProgramPciFeatures -
> start
> > > > > > > > > **********>>\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + Status = ProgramPciFeatures ( RootBridge);
> > > > > > > > >
> > > > > > > > > + DEBUG ((
> > > > > > > > >
> > > > > > > > > + DEBUG_INFO, "<<********** ProgramPciFeatures -
> end
> > > > > > > > > **********>>\n"
> > > > > > > > >
> > > > > > > > > + ));
> > > > > > > > >
> > > > > > > > > + break;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + case PciFeatureConfigurationComplete:
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // clean up the temporary resource nodes created for
> this root
> > > > > > bridge
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + DestroyPrimaryRootPortNodes ();
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + ErasePciFeaturesConfigurationTable ();
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if (Str != NULL) {
> > > > > > > > >
> > > > > > > > > + FreePool (Str);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // mark this root bridge as PCI features configuration
> complete,
> > > > and
> > > > > > no
> > > > > > > > > new
> > > > > > > > >
> > > > > > > > > + // enumeration is required
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + AddRootBridgeInPciFeaturesConfigCompletionList
> ( RootBridge,
> > > > > > FALSE);
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This routine is invoked from the Stop () interface for the EFI
> > > > handle of
> > > > > > > > the
> > > > > > > > >
> > > > > > > > > + RootBridge. Free up its node of type
> > > > > > > > > PCI_FEATURE_CONFIGURATION_COMPLETION_LIST.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +VOID
> > > > > > > > >
> > > > > > > > > +DestroyRootBridgePciFeaturesConfigCompletionList (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY *Link;
> > > > > > > > >
> > > > > > > > > + PCI_FEATURE_CONFIGURATION_COMPLETION_LIST
> *Temp;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( mPciFeaturesConfigurationCompletionList) {
> > > > > > > > >
> > > > > > > > > + Link = &mPciFeaturesConfigurationCompletionList-
> > > > >RootBridgeLink;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + do {
> > > > > > > > >
> > > > > > > > > + Temp =
> > > > > > > > >
> PCI_FEATURE_CONFIGURATION_COMPLETION_LIST_FROM_LINK
> > > > > > (Link);
> > > > > > > > >
> > > > > > > > > + if ( Temp->RootBridgeHandle == RootBridge->Handle) {
> > > > > > > > >
> > > > > > > > > + RemoveEntryList ( Link);
> > > > > > > > >
> > > > > > > > > + FreePool ( Temp);
> > > > > > > > >
> > > > > > > > > + return;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + Link = Link->ForwardLink;
> > > > > > > > >
> > > > > > > > > + } while (Link !=
> &mPciFeaturesConfigurationCompletionList-
> > > > > > > > > >RootBridgeLink);
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // not found on the PCI feature configuration completion list,
> > > > return
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > diff --git
> > > > a/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.h
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.h
> > > > > > > > > new file mode 100644
> > > > > > > > > index 0000000000..9f225fa993
> > > > > > > > > --- /dev/null
> > > > > > > > > +++
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.h
> > > > > > > > > @@ -0,0 +1,201 @@
> > > > > > > > > +/** @file
> > > > > > > > >
> > > > > > > > > + PCI standard feature support functions implementation for
> PCI
> > > > Bus
> > > > > > > > > module..
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> > > > > > > > >
> > > > > > > > > +SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +#ifndef _EFI_PCI_FEATURES_SUPPORT_H_
> > > > > > > > >
> > > > > > > > > +#define _EFI_PCI_FEATURES_SUPPORT_H_
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +#include "PciBus.h"
> > > > > > > > >
> > > > > > > > > +#include "PciPlatformSupport.h"
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +// Macro definitions for the PCI Features support PCD
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +#define PCI_FEATURE_SUPPORT_FLAG_MPS BIT0
> > > > > > > > >
> > > > > > > > > +#define PCI_FEATURE_SUPPORT_FLAG_MRRS BIT1
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +// defines the data structure to hold the details of the PCI
> Root
> > > > port
> > > > > > > > devices
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +typedef struct _PRIMARY_ROOT_PORT_NODE
> > > > > > > > > PRIMARY_ROOT_PORT_NODE;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +// defines the data structure to hold the configuration data
> for the
> > > > > > other
> > > > > > > > > PCI
> > > > > > > > >
> > > > > > > > > +// features
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +typedef struct
> _OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > > OTHER_PCI_FEATURES_CONFIGURATION_TABLE;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +// Defines for the PCI features configuration completion and
> re-
> > > > > > > > > enumeration list
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +typedef struct
> > > > _PCI_FEATURE_CONFIGURATION_COMPLETION_LIST
> > > > > > > > > PCI_FEATURE_CONFIGURATION_COMPLETION_LIST;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +// Signature value for the PCI Root Port node
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +#define PCI_ROOT_PORT_SIGNATURE SIGNATURE_32
> ('p',
> > > > 'c',
> > > > > > 'i',
> > > > > > > > 'p')
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +// Definitions of the PCI Root Port data structure members
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +struct _PRIMARY_ROOT_PORT_NODE {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Signature header
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + UINT32 Signature;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // linked list pointers to next node
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY NeighborRootPort;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // EFI handle of the parent Root Bridge instance
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + EFI_HANDLE RootBridgeHandle;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // EFI handle of the PCI controller
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + EFI_HANDLE RootPortHandle;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // PCI Secondary bus value of the PCI controller
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + UINT8 SecondaryBusStart;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // PCI Subordinate bus value of the PCI controller
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + UINT8 SecondaryBusEnd;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // pointer to the corresponding PCI feature configuration
> Table
> > > > node
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + OTHER_PCI_FEATURES_CONFIGURATION_TABLE
> > > > > > > > > *OtherPciFeaturesConfigurationTable;
> > > > > > > > >
> > > > > > > > > +};
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +#define PRIMARY_ROOT_PORT_NODE_FROM_LINK(a) \
> > > > > > > > >
> > > > > > > > > + CR (a, PRIMARY_ROOT_PORT_NODE, NeighborRootPort,
> > > > > > > > > PCI_ROOT_PORT_SIGNATURE)
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +// Definition of the PCI Feature configuration Table members
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +struct _OTHER_PCI_FEATURES_CONFIGURATION_TABLE {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Configuration Table ID
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + UINTN ID;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // to configure the PCI feature Maximum payload size to
> maintain
> > > > the
> > > > > > > > data
> > > > > > > > > packet
> > > > > > > > >
> > > > > > > > > + // size among all the PCI devices in the PCI hierarchy
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + UINT8 Max_Payload_Size;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // to configure the PCI feature maximum read request size
> to
> > > > > > maintain
> > > > > > > > the
> > > > > > > > > memory
> > > > > > > > >
> > > > > > > > > + // requester size among all the PCI devices in the PCI
> hierarchy
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + UINT8 Max_Read_Request_Size;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // lock the Max_Read_Request_Size for the entire PCI tree
> of a
> > > > root
> > > > > > port
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + BOOLEAN Lock_Max_Read_Request_Size;
> > > > > > > > >
> > > > > > > > > +};
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +// PCI feature configuration node signature value
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +#define PCI_FEATURE_CONFIGURATION_SIGNATURE
> > > > > > > > > SIGNATURE_32 ('p', 'c', 'i', 'f')
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +struct _PCI_FEATURE_CONFIGURATION_COMPLETION_LIST
> {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Signature header
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + UINT32 Signature;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // link to next Root Bridge whose PCI Feature configuration
> is
> > > > > > complete
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + LIST_ENTRY RootBridgeLink;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // EFI handle of the Root Bridge whose PCI feature
> configuration
> > > > is
> > > > > > > > > complete
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + EFI_HANDLE RootBridgeHandle;
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // indication for complete re-enumeration of the PCI
> feature
> > > > > > > > configuration
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + BOOLEAN
> > > ReEnumeratePciFeatureConfiguration;
> > > > > > > > >
> > > > > > > > > +};
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +#define
> > > > > > > > >
> > PCI_FEATURE_CONFIGURATION_COMPLETION_LIST_FROM_LINK(a)
> > > > \
> > > > > > > > >
> > > > > > > > > + CR (a, PCI_FEATURE_CONFIGURATION_COMPLETION_LIST,
> > > > > > > > > RootBridgeLink, PCI_FEATURE_CONFIGURATION_SIGNATURE)
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +// Declaration of the internal sub-phases within the PCI
> Feature
> > > > > > > > > enumeration
> > > > > > > > >
> > > > > > > > > +//
> > > > > > > > >
> > > > > > > > > +typedef enum {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // initial phase in configuring the other PCI features to
> record the
> > > > > > primary
> > > > > > > > >
> > > > > > > > > + // root ports
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciFeatureRootBridgeScan,
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // get the PCI device-specific platform policies and align with
> > > > device
> > > > > > > > > capabilities
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciFeatureGetDevicePolicy,
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // align all PCI nodes in the PCI heirarchical tree
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciFeatureSetupPhase,
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // finally override to complete configuration of the PCI
> feature
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciFeatureConfigurationPhase,
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // PCI feature configuration complete
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + PciFeatureConfigurationComplete
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +}PCI_FEATURE_CONFIGURATION_PHASE;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Main routine to indicate platform selection of any of the
> other
> > PCI
> > > > > > > > features
> > > > > > > > >
> > > > > > > > > + to be configured by this driver
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE platform has selected the other PCI features
> to
> > be
> > > > > > > > > configured
> > > > > > > > >
> > > > > > > > > + FALSE platform has not selected any of the other PCI
> > > > features
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +CheckOtherPciFeaturesPcd (
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Enumerate all the nodes of the specified root bridge or PCI-
> PCI
> > > > > > Bridge, to
> > > > > > > > >
> > > > > > > > > + configure the other PCI features.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS The other PCI features
> configuration
> > > > > > during
> > > > > > > > > enumeration
> > > > > > > > >
> > > > > > > > > + of all the nodes of the PCI root bridge
> instance
> > > > were
> > > > > > > > >
> > > > > > > > > + programmed in PCI-compliance pattern along
> > with
> > > > the
> > > > > > > > >
> > > > > > > > > + device-specific policy, as applicable.
> > > > > > > > >
> > > > > > > > > + @retval EFI_UNSUPPORTED One of the override
> operation
> > > > maong
> > > > > > the
> > > > > > > > > nodes of
> > > > > > > > >
> > > > > > > > > + the PCI hierarchy resulted in a incompatible
> > > > address
> > > > > > > > >
> > > > > > > > > + range.
> > > > > > > > >
> > > > > > > > > + @retval EFI_INVALID_PARAMETER The override operation is
> > > > > > performed
> > > > > > > > > with invalid input
> > > > > > > > >
> > > > > > > > > + parameters.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +EnumerateOtherPciFeatures (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This routine is invoked from the Stop () interface for the EFI
> > > > handle of
> > > > > > > > the
> > > > > > > > >
> > > > > > > > > + RootBridge. Free up its node of type
> > > > > > > > > PCI_FEATURE_CONFIGURATION_COMPLETION_LIST.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param RootBridge A pointer to the PCI_IO_DEVICE
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +VOID
> > > > > > > > >
> > > > > > > > > +DestroyRootBridgePciFeaturesConfigCompletionList (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *RootBridge
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +#endif
> > > > > > > > >
> > > > > > > > > diff --git
> > > > a/MdeModulePkg/Bus/Pci/PciBusDxe/PciPlatformSupport.c
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciPlatformSupport.c
> > > > > > > > > new file mode 100644
> > > > > > > > > index 0000000000..d94037d69a
> > > > > > > > > --- /dev/null
> > > > > > > > > +++
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciPlatformSupport.c
> > > > > > > > > @@ -0,0 +1,565 @@
> > > > > > > > > +/** @file
> > > > > > > > >
> > > > > > > > > + This file encapsulate the usage of PCI Platform Protocol
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + This file define the necessary hooks used to obtain the
> platform
> > > > > > > > >
> > > > > > > > > + level data and policies which could be used in the PCI
> > > > Enumeration
> > > > > > > > phases
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> > > > > > > > >
> > > > > > > > > +SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +#include "PciPlatformSupport.h"
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +EFI_PCI_PLATFORM_PROTOCOL
> > *mPciPlatformProtocol;
> > > > > > > > >
> > > > > > > > > +EFI_PCI_OVERRIDE_PROTOCOL
> > *mPciOverrideProtocol;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +EFI_PCI_PLATFORM_PROTOCOL2
> > > > *mPciPlatformProtocol2;
> > > > > > > > >
> > > > > > > > > +EFI_PCI_OVERRIDE_PROTOCOL2
> > > *mPciOverrideProtocol2;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function retrieves the PCI Platform Protocol published
> by
> > > > > > platform
> > > > > > > > > driver
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +VOID
> > > > > > > > >
> > > > > > > > > +GetPciPlatformProtocol (
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + mPciPlatformProtocol2 = NULL;
> > > > > > > > >
> > > > > > > > > + gBS->LocateProtocol (
> > > > > > > > >
> > > > > > > > > + &gEfiPciPlatformProtocol2Guid,
> > > > > > > > >
> > > > > > > > > + NULL,
> > > > > > > > >
> > > > > > > > > + (VOID **) &mPciPlatformProtocol2
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // If PCI Platform protocol doesn't exist, try to get Pci
> Override
> > > > > > Protocol.
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if (mPciPlatformProtocol2 == NULL) {
> > > > > > > > >
> > > > > > > > > + mPciOverrideProtocol2 = NULL;
> > > > > > > > >
> > > > > > > > > + gBS->LocateProtocol (
> > > > > > > > >
> > > > > > > > > + &gEfiPciOverrideProtocol2Guid,
> > > > > > > > >
> > > > > > > > > + NULL,
> > > > > > > > >
> > > > > > > > > + (VOID **) &mPciOverrideProtocol2
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // fetch the old PCI Platform Protocols if new are not
> installed
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if (mPciOverrideProtocol2 == NULL) {
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + mPciPlatformProtocol = NULL;
> > > > > > > > >
> > > > > > > > > + gBS->LocateProtocol (
> > > > > > > > >
> > > > > > > > > + &gEfiPciPlatformProtocolGuid,
> > > > > > > > >
> > > > > > > > > + NULL,
> > > > > > > > >
> > > > > > > > > + (VOID **) &mPciPlatformProtocol
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // If PCI Platform protocol doesn't exist, try to get Pci
> Override
> > > > > > Protocol.
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if (mPciPlatformProtocol == NULL) {
> > > > > > > > >
> > > > > > > > > + mPciOverrideProtocol = NULL;
> > > > > > > > >
> > > > > > > > > + gBS->LocateProtocol (
> > > > > > > > >
> > > > > > > > > + &gEfiPciOverrideProtocolGuid,
> > > > > > > > >
> > > > > > > > > + NULL,
> > > > > > > > >
> > > > > > > > > + (VOID **) &mPciOverrideProtocol
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function indicates the presence of PCI Platform driver
> > > > > > > > >
> > > > > > > > > + @retval TRUE or FALSE
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +CheckPciPlatformProtocolInstall (
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + if (mPciPlatformProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + } else if (mPciOverrideProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + if (mPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + } else if (mPciOverrideProtocol != NULL){
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return FALSE;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Provides the hooks from the PCI bus driver to every PCI
> controller
> > > > > > > > > (device/function) at various
> > > > > > > > >
> > > > > > > > > + stages of the PCI enumeration process that allow the host
> bridge
> > > > > > driver
> > > > > > > > to
> > > > > > > > > preinitialize individual
> > > > > > > > >
> > > > > > > > > + PCI controllers before enumeration.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + This function is called during the PCI enumeration process.
> No
> > > > specific
> > > > > > > > > action is expected from this
> > > > > > > > >
> > > > > > > > > + member function. It allows the host bridge driver to
> preinitialize
> > > > > > > > individual
> > > > > > > > > PCI controllers before
> > > > > > > > >
> > > > > > > > > + enumeration.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param[in] HostBridgeHandle The associated PCI host
> bridge
> > > > > > handle.
> > > > > > > > >
> > > > > > > > > + @param[in] RootBridgeHandle The associated PCI root
> bridge
> > > > > > handle.
> > > > > > > > >
> > > > > > > > > + @param[in] RootBridgePciAddress The address of the PCI
> device
> > > > on
> > > > > > the
> > > > > > > > > PCI bus.
> > > > > > > > >
> > > > > > > > > + @param[in] Phase The phase of the PCI controller
> > > > enumeration.
> > > > > > > > >
> > > > > > > > > + @param[in] ExecPhase Defines the execution phase of
> the PCI
> > > > > > chipset
> > > > > > > > > driver.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval Status returns the status from the PCI
> Platform
> > > > > > protocol as
> > > > > > > > is
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +PciPlatformPreprocessController (
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS
> > > > > > > > > RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > + IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE
> > > > Phase,
> > > > > > > > >
> > > > > > > > > + IN EFI_PCI_EXECUTION_PHASE ExecPhase
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if (mPciPlatformProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + Status = mPciPlatformProtocol2->PlatformPrepController (
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > > (EFI_PCI_PLATFORM_PROTOCOL*)mPciPlatformProtocol2,
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else if (mPciOverrideProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + Status = mPciOverrideProtocol2->PlatformPrepController (
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > > (EFI_PCI_PLATFORM_PROTOCOL*)mPciOverrideProtocol2,
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + if (mPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + Status = mPciPlatformProtocol->PlatformPrepController (
> > > > > > > > >
> > > > > > > > > + mPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else if (mPciOverrideProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // Call PlatformPci::PrepController() if the protocol is
> present.
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + Status = mPciOverrideProtocol->PlatformPrepController (
> > > > > > > > >
> > > > > > > > > + mPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > + RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // return PCI Platform Protocol not found
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return EFI_NOT_FOUND;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function notifies the PCI Platform driver about the PCI
> host
> > > > > > bridge
> > > > > > > > > resource
> > > > > > > > >
> > > > > > > > > + allocation phase and PCI execution phase.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param[in] HostBridge The handle of the host bridge
> > > > controller.
> > > > > > > > >
> > > > > > > > > + @param[in] Phase The phase of the PCI bus
> enumeration.
> > > > > > > > >
> > > > > > > > > + @param[in] ExecPhase Defines the execution phase of
> the PCI
> > > > > > > > chipset
> > > > > > > > > driver.
> > > > > > > > >
> > > > > > > > > + @retval Status returns the status from the PCI
> Platform
> > > > > > protocol
> > > > > > > > as
> > > > > > > > > is
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +PciPlatformNotifyPhase (
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + IN
> EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE
> > > > Phase,
> > > > > > > > >
> > > > > > > > > + IN EFI_PCI_EXECUTION_PHASE ExecPhase
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( mPciPlatformProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciPlatformProtocol2->PlatformNotify (
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > > (EFI_PCI_PLATFORM_PROTOCOL*)mPciPlatformProtocol2,
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else if ( mPciOverrideProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciOverrideProtocol2->PlatformNotify (
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > > (EFI_PCI_PLATFORM_PROTOCOL*)mPciOverrideProtocol2,
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( mPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciPlatformProtocol->PlatformNotify (
> > > > > > > > >
> > > > > > > > > + mPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else if ( mPciOverrideProtocol != NULL){
> > > > > > > > >
> > > > > > > > > + Status = mPciOverrideProtocol->PlatformNotify (
> > > > > > > > >
> > > > > > > > > + mPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > + HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + Phase,
> > > > > > > > >
> > > > > > > > > + ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // return PCI Platform Protocol not found
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return EFI_NOT_FOUND;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function retrieves the PCI platform policy.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciPolicy pointer to the legacy
> > > > > > EFI_PCI_PLATFORM_POLICY
> > > > > > > > >
> > > > > > > > > + @retval Status returns the status from the PCI Platform
> > > > protocol
> > > > > > as is
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +PciGetPlatformPolicy (
> > > > > > > > >
> > > > > > > > > + OUT EFI_PCI_PLATFORM_POLICY *PciPolicy
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( mPciPlatformProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciPlatformProtocol2->GetPlatformPolicy (
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > > (EFI_PCI_PLATFORM_PROTOCOL*)mPciPlatformProtocol2,
> > > > > > > > >
> > > > > > > > > + PciPolicy
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else if ( mPciOverrideProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciOverrideProtocol2->GetPlatformPolicy (
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > > (EFI_PCI_PLATFORM_PROTOCOL*)mPciOverrideProtocol2,
> > > > > > > > >
> > > > > > > > > + PciPolicy
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + if ( mPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciPlatformProtocol->GetPlatformPolicy (
> > > > > > > > >
> > > > > > > > > + mPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > + PciPolicy
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if ( mPciOverrideProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciOverrideProtocol->GetPlatformPolicy (
> > > > > > > > >
> > > > > > > > > + mPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > + PciPolicy
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // return PCI Platform Protocol not found
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return EFI_NOT_FOUND;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function retrieves the Option ROM image and size from
> the
> > > > > > Platform.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + It uses the PCI_IO_DEVICE internal fields are used to store
> > > > OpROM
> > > > > > > > > image/size
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param Controller An EFI handle for the PCI bus
> controller.
> > > > > > > > >
> > > > > > > > > + @param PciIoDevice A PCI_IO_DEVICE pointer to the PCI
> IO
> > > > device
> > > > > > to
> > > > > > > > be
> > > > > > > > > registered.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS The option ROM was available
> for
> > this
> > > > > > device
> > > > > > > > > and loaded into memory.
> > > > > > > > >
> > > > > > > > > + @retval EFI_NOT_FOUND No option ROM was available
> for
> > > > this
> > > > > > > > device.
> > > > > > > > >
> > > > > > > > > + @retval EFI_OUT_OF_RESOURCES No memory was
> available to
> > > > load
> > > > > > the
> > > > > > > > > option ROM.
> > > > > > > > >
> > > > > > > > > + @retval EFI_DEVICE_ERROR An error occurred in
> obtaining
> > the
> > > > > > option
> > > > > > > > > ROM.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +GetPlatformPciOptionRom (
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE Controller,
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciIoDevice
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > + VOID *PlatformOpRomBuffer;
> > > > > > > > >
> > > > > > > > > + UINTN PlatformOpRomSize;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if (mPciPlatformProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciPlatformProtocol2->GetPciRom (
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > > (EFI_PCI_PLATFORM_PROTOCOL*)mPciPlatformProtocol2,
> > > > > > > > >
> > > > > > > > > + PciIoDevice->Handle,
> > > > > > > > >
> > > > > > > > > + &PlatformOpRomBuffer,
> > > > > > > > >
> > > > > > > > > + &PlatformOpRomSize
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else if (mPciOverrideProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciOverrideProtocol2->GetPciRom (
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > > (EFI_PCI_PLATFORM_PROTOCOL*)mPciOverrideProtocol2,
> > > > > > > > >
> > > > > > > > > + PciIoDevice->Handle,
> > > > > > > > >
> > > > > > > > > + &PlatformOpRomBuffer,
> > > > > > > > >
> > > > > > > > > + &PlatformOpRomSize
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + if (mPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciPlatformProtocol->GetPciRom (
> > > > > > > > >
> > > > > > > > > + mPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > + PciIoDevice->Handle,
> > > > > > > > >
> > > > > > > > > + &PlatformOpRomBuffer,
> > > > > > > > >
> > > > > > > > > + &PlatformOpRomSize
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else if (mPciOverrideProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > + Status = mPciOverrideProtocol->GetPciRom (
> > > > > > > > >
> > > > > > > > > + mPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > + PciIoDevice->Handle,
> > > > > > > > >
> > > > > > > > > + &PlatformOpRomBuffer,
> > > > > > > > >
> > > > > > > > > + &PlatformOpRomSize
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // return PCI Platform Protocol not found
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + return EFI_NOT_FOUND;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + if (!EFI_ERROR (Status)) {
> > > > > > > > >
> > > > > > > > > + PciIoDevice->EmbeddedRom = FALSE;
> > > > > > > > >
> > > > > > > > > + PciIoDevice->RomSize = (UINT32)PlatformOpRomSize;
> > > > > > > > >
> > > > > > > > > + PciIoDevice->PciIo.RomSize = PlatformOpRomSize;
> > > > > > > > >
> > > > > > > > > + PciIoDevice->PciIo.RomImage = PlatformOpRomBuffer;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Helper routine to indicate whether the given PCI device
> specific
> > > > > > policy
> > > > > > > > > value
> > > > > > > > >
> > > > > > > > > + dictates to override the Max_Payload_Size to a particular
> value,
> > > > or
> > > > > > set as
> > > > > > > > > per
> > > > > > > > >
> > > > > > > > > + device capability.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param MPS Input device-specific policy should be in
> terms of
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_PAYLOAD_SIZE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE Setup Max_Payload_Size as per device
> capability
> > > > > > > > >
> > > > > > > > > + FALSE override as per device-specific platform policy
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +SetupMpsAsPerDeviceCapability (
> > > > > > > > >
> > > > > > > > > + IN UINT8 MPS
> > > > > > > > >
> > > > > > > > > +)
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + if ( MPS == EFI_PCI_CONF_MAX_PAYLOAD_SIZE_AUTO) {
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + return FALSE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Helper routine to indicate whether the given PCI device
> specific
> > > > > > policy
> > > > > > > > > value
> > > > > > > > >
> > > > > > > > > + dictates to override the Max_Read_Req_Size to a particular
> > value,
> > > > or
> > > > > > set
> > > > > > > > as
> > > > > > > > > per
> > > > > > > > >
> > > > > > > > > + device capability.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param MRRS Input device-specific policy should be in
> terms
> > > > of
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_READ_REQ_SIZE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE Setup Max_Read_Req_Size as per device
> > > > capability
> > > > > > > > >
> > > > > > > > > + FALSE override as per device-specific platform policy
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +SetupMrrsAsPerDeviceCapability (
> > > > > > > > >
> > > > > > > > > + IN UINT8 MRRS
> > > > > > > > >
> > > > > > > > > +)
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + if ( MRRS == EFI_PCI_CONF_MAX_READ_REQ_SIZE_AUTO) {
> > > > > > > > >
> > > > > > > > > + return TRUE;
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + return FALSE;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Routine to translate the given device-specific platform policy
> > from
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_PAYLOAD_SIZE to HW-specific value,
> as per
> > > > PCI
> > > > > > > > Base
> > > > > > > > > Specification
> > > > > > > > >
> > > > > > > > > + Revision 4.0; for the PCI feature Max_Payload_Size.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param MPS Input device-specific policy should be in
> terms of
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_PAYLOAD_SIZE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval Range values for the Max_Payload_Size as
> defined in
> > > > the
> > > > > > > > PCI
> > > > > > > > >
> > > > > > > > > + Base Specification 4.0
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +UINT8
> > > > > > > > >
> > > > > > > > > +TranslateMpsSetupValueToPci (
> > > > > > > > >
> > > > > > > > > + IN UINT8 MPS
> > > > > > > > >
> > > > > > > > > +)
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + switch (MPS) {
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_PAYLOAD_SIZE_128B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_PAYLOAD_SIZE_128B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_PAYLOAD_SIZE_256B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_PAYLOAD_SIZE_256B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_PAYLOAD_SIZE_512B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_PAYLOAD_SIZE_512B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_PAYLOAD_SIZE_1024B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_PAYLOAD_SIZE_1024B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_PAYLOAD_SIZE_2048B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_PAYLOAD_SIZE_2048B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_PAYLOAD_SIZE_4096B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_PAYLOAD_SIZE_4096B;
> > > > > > > > >
> > > > > > > > > + default:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_PAYLOAD_SIZE_128B;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Routine to translate the given device-specific platform policy
> > from
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_READ_REQ_SIZE to HW-specific value,
> as
> > > > per
> > > > > > PCI
> > > > > > > > > Base Specification
> > > > > > > > >
> > > > > > > > > + Revision 4.0; for the PCI feature Max_Read_Req_Size.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param MRRS Input device-specific policy should be in
> terms
> > > > of
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_READ_REQ_SIZE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval Range values for the Max_Read_Req_Size as
> defined
> > > > in
> > > > > > the
> > > > > > > > > PCI
> > > > > > > > >
> > > > > > > > > + Base Specification 4.0
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +UINT8
> > > > > > > > >
> > > > > > > > > +TranslateMrrsSetupValueToPci (
> > > > > > > > >
> > > > > > > > > + IN UINT8 MRRS
> > > > > > > > >
> > > > > > > > > +)
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + switch (MRRS) {
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_READ_REQ_SIZE_128B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_READ_REQ_SIZE_128B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_READ_REQ_SIZE_256B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_READ_REQ_SIZE_256B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_READ_REQ_SIZE_512B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_READ_REQ_SIZE_512B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_READ_REQ_SIZE_1024B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_READ_REQ_SIZE_1024B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_READ_REQ_SIZE_2048B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_READ_REQ_SIZE_2048B;
> > > > > > > > >
> > > > > > > > > + case EFI_PCI_CONF_MAX_READ_REQ_SIZE_4096B:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_READ_REQ_SIZE_4096B;
> > > > > > > > >
> > > > > > > > > + default:
> > > > > > > > >
> > > > > > > > > + return PCIE_MAX_READ_REQ_SIZE_128B;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Generic routine to setup the PCI features as per its
> > > > predetermined
> > > > > > > > > defaults.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +VOID
> > > > > > > > >
> > > > > > > > > +SetupDefaultsDevicePlatformPolicy (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMPS =
> > > > EFI_PCI_CONF_MAX_PAYLOAD_SIZE_AUTO;
> > > > > > > > >
> > > > > > > > > + PciDevice->SetupMRRS =
> > > > > > EFI_PCI_CONF_MAX_READ_REQ_SIZE_AUTO;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Intermediate routine to either get the PCI device specific
> > > > platform
> > > > > > > > policies
> > > > > > > > >
> > > > > > > > > + through the PCI Platform Protocol, or its alias the PCI
> Override
> > > > > > Protocol.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciIoDevice A pointer to PCI_IO_DEVICE
> > > > > > > > >
> > > > > > > > > + @param PciPlatformProtocol A pointer to
> > > > > > > > > EFI_PCI_PLATFORM_PROTOCOL2
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_STATUS The direct status from the PCI
> Platform
> > > > > > Protocol
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS if on returning predetermined PCI
> > > > features
> > > > > > > > > defaults,
> > > > > > > > >
> > > > > > > > > + for the case when protocol returns as
> > > > > > EFI_UNSUPPORTED
> > > > > > > > >
> > > > > > > > > + to indicate PCI device exist and it has no
> platform
> > > > > > > > >
> > > > > > > > > + policy defined.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +GetPciDevicePlatformPolicyEx (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciIoDevice,
> > > > > > > > >
> > > > > > > > > + IN EFI_PCI_PLATFORM_PROTOCOL2 *PciPlatformProtocol
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + EFI_PCI_PLATFORM_EXTENDED_POLICY
> > > > PciPlatformExtendedPolicy;
> > > > > > > > >
> > > > > > > > > + EFI_STATUS Status;
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + ZeroMem ( &PciPlatformExtendedPolicy, sizeof
> > > > > > > > > (EFI_PCI_PLATFORM_EXTENDED_POLICY));
> > > > > > > > >
> > > > > > > > > + Status = PciPlatformProtocol->GetDevicePolicy (
> > > > > > > > >
> > > > > > > > > + PciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > + PciIoDevice->Handle,
> > > > > > > > >
> > > > > > > > > + &PciPlatformExtendedPolicy
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // platform chipset policies are returned for this PCI device
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if (!EFI_ERROR(Status)) {
> > > > > > > > >
> > > > > > > > > + PciIoDevice->SetupMPS =
> > > > PciPlatformExtendedPolicy.DeviceCtlMPS;
> > > > > > > > >
> > > > > > > > > + PciIoDevice->SetupMRRS =
> > > > > > PciPlatformExtendedPolicy.DeviceCtlMRRS;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // platform chipset policies are not provided for this PCI
> device
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + if (EFI_ERROR(Status) == EFI_UNSUPPORTED) {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // let the enumeration happen as per the PCI standard way
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + SetupDefaultsDevicePlatformPolicy ( PciIoDevice);
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + return Status;
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Gets the PCI device-specific platform policy from the PCI
> Platform
> > > > > > > > Protocol.
> > > > > > > > >
> > > > > > > > > + If no PCI Platform protocol is published than setup the PCI
> feature
> > > > to
> > > > > > > > > predetermined
> > > > > > > > >
> > > > > > > > > + defaults, in order to align all the PCI devices in the PCI
> hierarchy,
> > > > as
> > > > > > > > > applicable.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to PCI_IO_DEVICE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_STATUS The direct status from the PCI
> Platform
> > > > > > Protocol
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS On return of predetermined PCI
> features
> > > > > > defaults,
> > > > > > > > > for
> > > > > > > > >
> > > > > > > > > + the case when protocol returns as
> > EFI_UNSUPPORTED
> > > > to
> > > > > > > > >
> > > > > > > > > + indicate PCI device exist and it has no platform
> policy
> > > > > > > > >
> > > > > > > > > + defined. Also, on returns when no PCI Platform
> > > > Protocol
> > > > > > > > >
> > > > > > > > > + exist.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +GetPciDevicePlatformPolicy (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice
> > > > > > > > >
> > > > > > > > > + )
> > > > > > > > >
> > > > > > > > > +{
> > > > > > > > >
> > > > > > > > > + if ( mPciPlatformProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + return GetPciDevicePlatformPolicyEx ( PciDevice,
> > > > > > > > mPciPlatformProtocol2);
> > > > > > > > >
> > > > > > > > > + } else if (mPciOverrideProtocol2 != NULL) {
> > > > > > > > >
> > > > > > > > > + return GetPciDevicePlatformPolicyEx ( PciDevice,
> > > > > > > > mPciOverrideProtocol2);
> > > > > > > > >
> > > > > > > > > + } else {
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + // new PCI Platform Protocol 2 is not installed; let the
> > > > enumeration
> > > > > > > > > happen
> > > > > > > > >
> > > > > > > > > + // as per PCI standard way
> > > > > > > > >
> > > > > > > > > + //
> > > > > > > > >
> > > > > > > > > + SetupDefaultsDevicePlatformPolicy ( PciDevice);
> > > > > > > > >
> > > > > > > > > + return EFI_SUCCESS;
> > > > > > > > >
> > > > > > > > > + }
> > > > > > > > >
> > > > > > > > > +}
> > > > > > > > >
> > > > > > > > > diff --git
> > > > a/MdeModulePkg/Bus/Pci/PciBusDxe/PciPlatformSupport.h
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciPlatformSupport.h
> > > > > > > > > new file mode 100644
> > > > > > > > > index 0000000000..d54e46b950
> > > > > > > > > --- /dev/null
> > > > > > > > > +++
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciPlatformSupport.h
> > > > > > > > > @@ -0,0 +1,193 @@
> > > > > > > > > +/** @file
> > > > > > > > >
> > > > > > > > > + This file encapsulate the usage of PCI Platform Protocol
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + This file define the necessary hooks used to obtain the
> platform
> > > > > > > > >
> > > > > > > > > + level data and policies which could be used in the PCI
> > > > Enumeration
> > > > > > > > phases
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> > > > > > > > >
> > > > > > > > > +SPDX-License-Identifier: BSD-2-Clause-Patent
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +#ifndef _EFI_PCI_PLATFORM_SUPPORT_H_
> > > > > > > > >
> > > > > > > > > +#define _EFI_PCI_PLATFORM_SUPPORT_H_
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +#include "PciBus.h"
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function retrieves the PCI Platform Protocol published
> by
> > > > > > platform
> > > > > > > > > driver
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +VOID
> > > > > > > > >
> > > > > > > > > +GetPciPlatformProtocol (
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function indicates the presence of PCI Platform driver
> > > > > > > > >
> > > > > > > > > + @retval TRUE or FALSE
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +CheckPciPlatformProtocolInstall (
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Provides the hooks from the PCI bus driver to every PCI
> controller
> > > > > > > > > (device/function) at various
> > > > > > > > >
> > > > > > > > > + stages of the PCI enumeration process that allow the host
> bridge
> > > > > > driver
> > > > > > > > to
> > > > > > > > > preinitialize individual
> > > > > > > > >
> > > > > > > > > + PCI controllers before enumeration.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + This function is called during the PCI enumeration process.
> No
> > > > specific
> > > > > > > > > action is expected from this
> > > > > > > > >
> > > > > > > > > + member function. It allows the host bridge driver to
> preinitialize
> > > > > > > > individual
> > > > > > > > > PCI controllers before
> > > > > > > > >
> > > > > > > > > + enumeration.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param[in] HostBridgeHandle The associated PCI host
> bridge
> > > > > > handle.
> > > > > > > > >
> > > > > > > > > + @param[in] RootBridgeHandle The associated PCI root
> bridge
> > > > > > handle.
> > > > > > > > >
> > > > > > > > > + @param[in] RootBridgePciAddress The address of the PCI
> device
> > > > on
> > > > > > the
> > > > > > > > > PCI bus.
> > > > > > > > >
> > > > > > > > > + @param[in] Phase The phase of the PCI controller
> > > > enumeration.
> > > > > > > > >
> > > > > > > > > + @param[in] ExecPhase Defines the execution phase of
> the PCI
> > > > > > chipset
> > > > > > > > > driver.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval Status returns the status from the PCI
> Platform
> > > > > > protocol as
> > > > > > > > is
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +PciPlatformPreprocessController (
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE RootBridgeHandle,
> > > > > > > > >
> > > > > > > > > + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS
> > > > > > > > > RootBridgePciAddress,
> > > > > > > > >
> > > > > > > > > + IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE
> > > > Phase,
> > > > > > > > >
> > > > > > > > > + IN EFI_PCI_EXECUTION_PHASE ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function notifies the PCI Platform driver about the PCI
> host
> > > > > > bridge
> > > > > > > > > resource
> > > > > > > > >
> > > > > > > > > + allocation phase and PCI execution phase.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param[in] HostBridge The handle of the host bridge
> > > > controller.
> > > > > > > > >
> > > > > > > > > + @param[in] Phase The phase of the PCI bus
> enumeration.
> > > > > > > > >
> > > > > > > > > + @param[in] ExecPhase Defines the execution phase of
> the PCI
> > > > > > > > chipset
> > > > > > > > > driver.
> > > > > > > > >
> > > > > > > > > + @retval Status returns the status from the PCI
> Platform
> > > > > > protocol
> > > > > > > > as
> > > > > > > > > is
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +PciPlatformNotifyPhase (
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE HostBridgeHandle,
> > > > > > > > >
> > > > > > > > > + IN
> EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE
> > > > Phase,
> > > > > > > > >
> > > > > > > > > + IN EFI_PCI_EXECUTION_PHASE ExecPhase
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function retrieves the PCI platform policy.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciPolicy pointer to the legacy
> > > > > > EFI_PCI_PLATFORM_POLICY
> > > > > > > > >
> > > > > > > > > + @retval Status returns the status from the PCI Platform
> > > > protocol
> > > > > > as is
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +PciGetPlatformPolicy (
> > > > > > > > >
> > > > > > > > > + OUT EFI_PCI_PLATFORM_POLICY *PciPolicy
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + This function retrieves the Option ROM image and size from
> the
> > > > > > Platform.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + It uses the PCI_IO_DEVICE internal fields are used to store
> > > > OpROM
> > > > > > > > > image/size
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param Controller An EFI handle for the PCI bus
> controller.
> > > > > > > > >
> > > > > > > > > + @param PciIoDevice A PCI_IO_DEVICE pointer to the PCI
> IO
> > > > device
> > > > > > to
> > > > > > > > be
> > > > > > > > > registered.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS The option ROM was available
> for
> > this
> > > > > > device
> > > > > > > > > and loaded into memory.
> > > > > > > > >
> > > > > > > > > + @retval EFI_NOT_FOUND No option ROM was available
> for
> > > > this
> > > > > > > > device.
> > > > > > > > >
> > > > > > > > > + @retval EFI_OUT_OF_RESOURCES No memory was
> available to
> > > > load
> > > > > > the
> > > > > > > > > option ROM.
> > > > > > > > >
> > > > > > > > > + @retval EFI_DEVICE_ERROR An error occurred in
> obtaining
> > the
> > > > > > option
> > > > > > > > > ROM.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +GetPlatformPciOptionRom (
> > > > > > > > >
> > > > > > > > > + IN EFI_HANDLE Controller,
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciIoDevice
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Gets the PCI device-specific platform policy from the PCI
> Platform
> > > > > > > > Protocol.
> > > > > > > > >
> > > > > > > > > + If no PCI Platform protocol is published than setup the PCI
> feature
> > > > to
> > > > > > > > > predetermined
> > > > > > > > >
> > > > > > > > > + defaults, in order to align all the PCI devices in the PCI
> hierarchy,
> > > > as
> > > > > > > > > applicable.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param PciDevice A pointer to PCI_IO_DEVICE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval EFI_STATUS The direct status from the PCI
> Platform
> > > > > > Protocol
> > > > > > > > >
> > > > > > > > > + @retval EFI_SUCCESS On return of predetermined PCI
> features
> > > > > > defaults,
> > > > > > > > > for
> > > > > > > > >
> > > > > > > > > + the case when protocol returns as
> > EFI_UNSUPPORTED
> > > > to
> > > > > > > > >
> > > > > > > > > + indicate PCI device exist and it has no platform
> policy
> > > > > > > > >
> > > > > > > > > + defined. Also, on returns when no PCI Platform
> > > > Protocol
> > > > > > > > >
> > > > > > > > > + exist.
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +EFI_STATUS
> > > > > > > > >
> > > > > > > > > +GetPciDevicePlatformPolicy (
> > > > > > > > >
> > > > > > > > > + IN PCI_IO_DEVICE *PciDevice
> > > > > > > > >
> > > > > > > > > + );
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Helper routine to indicate whether the given PCI device
> specific
> > > > > > policy
> > > > > > > > > value
> > > > > > > > >
> > > > > > > > > + dictates to override the Max_Payload_Size to a particular
> value,
> > > > or
> > > > > > set as
> > > > > > > > > per
> > > > > > > > >
> > > > > > > > > + device capability.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param MPS Input device-specific policy should be in
> terms of
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_PAYLOAD_SIZE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE Setup Max_Payload_Size as per device
> capability
> > > > > > > > >
> > > > > > > > > + FALSE override as per device-specific platform policy
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +SetupMpsAsPerDeviceCapability (
> > > > > > > > >
> > > > > > > > > + IN UINT8 MPS
> > > > > > > > >
> > > > > > > > > +);
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Helper routine to indicate whether the given PCI device
> specific
> > > > > > policy
> > > > > > > > > value
> > > > > > > > >
> > > > > > > > > + dictates to override the Max_Read_Req_Size to a particular
> > value,
> > > > or
> > > > > > set
> > > > > > > > as
> > > > > > > > > per
> > > > > > > > >
> > > > > > > > > + device capability.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param MRRS Input device-specific policy should be in
> terms
> > > > of
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_READ_REQ_SIZE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval TRUE Setup Max_Read_Req_Size as per device
> > > > capability
> > > > > > > > >
> > > > > > > > > + FALSE override as per device-specific platform policy
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +BOOLEAN
> > > > > > > > >
> > > > > > > > > +SetupMrrsAsPerDeviceCapability (
> > > > > > > > >
> > > > > > > > > + IN UINT8 MRRS
> > > > > > > > >
> > > > > > > > > +);
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Routine to translate the given device-specific platform policy
> > from
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_PAYLOAD_SIZE to HW-specific value,
> as per
> > > > PCI
> > > > > > > > Base
> > > > > > > > > Specification
> > > > > > > > >
> > > > > > > > > + Revision 4.0; for the PCI feature Max_Payload_Size.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param MPS Input device-specific policy should be in
> terms of
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_PAYLOAD_SIZE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval Range values for the Max_Payload_Size as
> defined in
> > > > the
> > > > > > > > PCI
> > > > > > > > >
> > > > > > > > > + Base Specification 4.0
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +UINT8
> > > > > > > > >
> > > > > > > > > +TranslateMpsSetupValueToPci (
> > > > > > > > >
> > > > > > > > > + IN UINT8 MPS
> > > > > > > > >
> > > > > > > > > +);
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > +/**
> > > > > > > > >
> > > > > > > > > + Routine to translate the given device-specific platform policy
> > from
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_READ_REQ_SIZE to HW-specific value,
> as
> > > > per
> > > > > > PCI
> > > > > > > > > Base Specification
> > > > > > > > >
> > > > > > > > > + Revision 4.0; for the PCI feature Max_Read_Req_Size.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @param MRRS Input device-specific policy should be in
> terms
> > > > of
> > > > > > type
> > > > > > > > >
> > > > > > > > > + EFI_PCI_CONF_MAX_READ_REQ_SIZE
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > + @retval Range values for the Max_Read_Req_Size as
> defined
> > > > in
> > > > > > the
> > > > > > > > > PCI
> > > > > > > > >
> > > > > > > > > + Base Specification 4.0
> > > > > > > > >
> > > > > > > > > +**/
> > > > > > > > >
> > > > > > > > > +UINT8
> > > > > > > > >
> > > > > > > > > +TranslateMrrsSetupValueToPci (
> > > > > > > > >
> > > > > > > > > + IN UINT8 MRRS
> > > > > > > > >
> > > > > > > > > +);
> > > > > > > > >
> > > > > > > > > +#endif
> > > > > > > > >
> > > > > > > > > diff --git
> > > > a/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c
> > > > > > > > > b/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c
> > > > > > > > > index 4969ee0f64..755423f77b 100644
> > > > > > > > > ---
> a/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c
> > > > > > > > > +++
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciResourceSupport.c
> > > > > > > > > @@ -198,20 +198,7 @@ CalculateApertureIo16 (
> > > > > > > > > //
> > > > > > > > >
> > > > > > > > > Status = EFI_NOT_FOUND;
> > > > > > > > >
> > > > > > > > > PciPolicy = 0;
> > > > > > > > >
> > > > > > > > > - if (gPciPlatformProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > - Status = gPciPlatformProtocol->GetPlatformPolicy (
> > > > > > > > >
> > > > > > > > > - gPciPlatformProtocol,
> > > > > > > > >
> > > > > > > > > - &PciPolicy
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - }
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > - if (EFI_ERROR (Status) && gPciOverrideProtocol != NULL) {
> > > > > > > > >
> > > > > > > > > - Status = gPciOverrideProtocol->GetPlatformPolicy (
> > > > > > > > >
> > > > > > > > > - gPciOverrideProtocol,
> > > > > > > > >
> > > > > > > > > - &PciPolicy
> > > > > > > > >
> > > > > > > > > - );
> > > > > > > > >
> > > > > > > > > - }
> > > > > > > > >
> > > > > > > > > -
> > > > > > > > >
> > > > > > > > > + Status = PciGetPlatformPolicy ( &PciPolicy);
> > > > > > > > >
> > > > > > > > > if (!EFI_ERROR (Status)) {
> > > > > > > > >
> > > > > > > > > if ((PciPolicy & EFI_RESERVE_ISA_IO_ALIAS) != 0) {
> > > > > > > > >
> > > > > > > > > mReserveIsaAliases = TRUE;
> > > > > > > > >
> > > > > > > > > diff --git a/MdeModulePkg/MdeModulePkg.dec
> > > > > > > > > b/MdeModulePkg/MdeModulePkg.dec
> > > > > > > > > index 17beb45235..7bcbe5a3ea 100644
> > > > > > > > > --- a/MdeModulePkg/MdeModulePkg.dec
> > > > > > > > > +++ b/MdeModulePkg/MdeModulePkg.dec
> > > > > > > > > @@ -1026,6 +1026,16 @@
> > > > > > > > > # @Prompt Enable UEFI Stack Guard.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard|FALSE|BOOLEAN|0
> > > > > > > > > x30001055
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > + ## This PCD is to indicate the PCI Bus driver to setup other
> new
> > > > PCI
> > > > > > > > > features.
> > > > > > > > >
> > > > > > > > > + # Each PCI feature is represented by its mask bit position
> and it
> > > > > > > > configures
> > > > > > > > >
> > > > > > > > > + # if that bit is set.
> > > > > > > > >
> > > > > > > > > + #
> > > > > > > > >
> > > > > > > > > + # Bit 0 - if set, the PCI Bus driver programs the device's
> > > > > > > > > Max_Payload_Size.<BR>
> > > > > > > > >
> > > > > > > > > + # Bit 1 - if set, the PCI Bus driver programs the device's
> > > > > > > > > Max_Read_Req_Size.<BR>
> > > > > > > > >
> > > > > > > > > + # Bit 2 to 31 - Reserved for future use by the PCI Bus
> driver.<BR>
> > > > > > > > >
> > > > > > > > > + # @Prompt The UEFI PCU Bus driver enables the new set of
> other
> > > > PCI
> > > > > > > > > Features.
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdOtherPciFeatures|0x00000003|UIN
> > > > > > > > > T32|0x30001056
> > > > > > > > >
> > > > > > > > > +
> > > > > > > > >
> > > > > > > > > [PcdsFixedAtBuild, PcdsPatchableInModule]
> > > > > > > > >
> > > > > > > > > ## Dynamic type PCD can be registered callback function for
> Pcd
> > > > > > setting
> > > > > > > > > action.
> > > > > > > > >
> > > > > > > > > # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the
> > > > maximum
> > > > > > > > > number of callback function
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > 2.21.0.windows.1
> >
> >
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#49277): https://edk2.groups.io/g/devel/message/49277
Mute This Topic: https://groups.io/mt/34264504/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list