[edk2-devel] [PATCH v2 2/2] Add VS2019 Support on ToolSetup Batches
Cheng, Ching JenX
ching.jenx.cheng at intel.com
Thu Sep 19 08:37:25 UTC 2019
Hi Liming,
Ok, Thanks for your comments,
I will prepare the patch V3 with your comments,
Thanks,
Best Regards,
Allen
> -----Original Message-----
> From: Gao, Liming
> Sent: Thursday, September 19, 2019 4:24 PM
> To: Cheng, Ching JenX <ching.jenx.cheng at intel.com>;
> devel at edk2.groups.io
> Cc: Chan, Amy <amy.chan at intel.com>; Feng, Bob C <bob.c.feng at intel.com>
> Subject: RE: [PATCH v2 2/2] Add VS2019 Support on ToolSetup Batches
>
> Allen:
> In my machine, I install VS2017, but not install VS2019. I call edksetup.bat. It
> will set up VS2017 environment.
> But with this change, it will set the wrong WINSDK10_PREFIX. I add the
> comments in the patch.
>
> >-----Original Message-----
> >From: Cheng, Ching JenX
> >Sent: Tuesday, September 17, 2019 11:16 AM
> >To: devel at edk2.groups.io
> >Cc: Chan, Amy <amy.chan at intel.com>; Feng, Bob C
> <bob.c.feng at intel.com>;
> >Gao, Liming <liming.gao at intel.com>
> >Subject: [PATCH v2 2/2] Add VS2019 Support on ToolSetup Batches
> >
> >REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182
> >
> >Inorder to support VS2019, we add VS2019 config process in Setup Batch
> >Files, Because VS2019 and VS2017 could using same vswhere.exe to detect
> >the InstallationPath, So we add the -version as the parameter of
> >vswhere to get the correct VS2017/VS2019's InstallationPath
> >
> >Cc: Amy Chan <amy.chan at intel.com>
> >Cc: Bob Feng <bob.c.feng at intel.com>
> >Cc: Liming Gao <liming.gao at intel.com>
> >Signed-off-by: Ching JenX Cheng <ching.jenx.cheng at intel.com>
> >---
> > BaseTools/get_vsvars.bat | 37 ++++++++++++++++++++++++++++++--
> ---
> >--
> > BaseTools/set_vsprefix_envs.bat | 70
> >+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++
> >++++++-----
> > BaseTools/toolsetup.bat | 16 +++++++++++++---
> > edksetup.bat | 6 ++++--
> > 4 files changed, 112 insertions(+), 17 deletions(-)
> >
> >diff --git a/BaseTools/get_vsvars.bat b/BaseTools/get_vsvars.bat index
> >9f3759b2a9..3beb113be2 100644
> >--- a/BaseTools/get_vsvars.bat
> >+++ b/BaseTools/get_vsvars.bat
> >@@ -10,15 +10,21 @@
> > @echo off
> > set SCRIPT_ERROR=0
> > if "%1"=="" goto main
> >+if /I "%1"=="VS2019" goto VS2019Vars
> > if /I "%1"=="VS2017" goto VS2017Vars
> > if /I "%1"=="VS2015" goto VS2015Vars
> > if /I "%1"=="VS2013" goto VS2013Vars
> > if /I "%1"=="VS2012" goto VS2012Vars
> >
> > :set_vsvars
> >-for /f "usebackq tokens=1* delims=: " %%i in (`%*`) do (
> >- if /i "%%i"=="installationPath" call "%%j\VC\Auxiliary\Build\vcvars32.bat"
> >-)
> >+if defined VCINSTALLDIR goto :EOF
> >+ call %* > vswhereInfo
> >+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> >+ if /i "%%i"=="installationPath" (
> >+ call "%%j\VC\Auxiliary\Build\vcvars32.bat"
> >+ )
> >+ )
> >+ del vswhereInfo
> > goto :EOF
> >
> > :read_vsvars
> >@@ -42,19 +48,36 @@ REM (Or invoke the relevant vsvars32 file
> >beforehand).
> >
> > :main
> > if defined VCINSTALLDIR goto :done
> >+ :VS2019Vars
> >+ if exist "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" (
> >+ if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2019\BuildTools"
> (
> >+ call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -products
> >Microsoft.VisualStudio.Product.BuildTools -version 16,17
> >+ ) else (
> >+ call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -version 16,17
> >+ )
> >+ )
> >+ if exist "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe"
> (
> >+ if exist "%ProgramFiles%\Microsoft Visual Studio\2019\BuildTools" (
> >+ call :set_vsvars "%ProgramFiles%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -products
> >Microsoft.VisualStudio.Product.BuildTools -version 16,17
> >+ ) else (
> >+ call :set_vsvars "%ProgramFiles%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -version 16,17
> >+ )
> >+ )
> >+ if /I "%1"=="VS2019" goto ToolNotInstall
> >+
> > :VS2017Vars
> > if exist "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" (
> > if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2017\BuildTools" (
> >- call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -products
> >Microsoft.VisualStudio.Product.BuildTools
> >+ call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -products
> >Microsoft.VisualStudio.Product.BuildTools -version 15,16
> > ) else (
> >- call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe"
> >+ call :set_vsvars "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -version 15,16
> > )
> > )
> > if exist "%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe" (
> > if exist "%ProgramFiles%\Microsoft Visual Studio\2017\BuildTools" (
> >- call :set_vsvars "%ProgramFiles%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -products
> >Microsoft.VisualStudio.Product.BuildTools
> >+ call :set_vsvars "%ProgramFiles%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -products
> >Microsoft.VisualStudio.Product.BuildTools -version 15,16
> > ) else (
> >- call :set_vsvars "%ProgramFiles%\Microsoft Visual
> >Studio\Installer\vswhere.exe"
> >+ call :set_vsvars "%ProgramFiles%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -version 15,16
> > )
> > )
> > if /I "%1"=="VS2017" goto ToolNotInstall diff --git
> >a/BaseTools/set_vsprefix_envs.bat
> >b/BaseTools/set_vsprefix_envs.bat
> >index 81686f5b63..46b84713a6 100644
> >--- a/BaseTools/set_vsprefix_envs.bat
> >+++ b/BaseTools/set_vsprefix_envs.bat
> >@@ -3,7 +3,7 @@
> > @REM however it may be executed directly from the BaseTools project
> >folder
> > @REM if the file is not executed within a WORKSPACE\BaseTools folder.
> > @REM
> >- at REM Copyright (c) 2016-2017, Intel Corporation. All rights
> >reserved.<BR>
> >+ at REM Copyright (c) 2016-2019, Intel Corporation. All rights
> >+reserved.<BR>
> > @REM
> > @REM SPDX-License-Identifier: BSD-2-Clause-Patent @REM @@ -18,6
> +18,7
> >@@ set SCRIPT_ERROR=1 goto :EOF
> >
> > :main
> >+if /I "%1"=="VS2019" goto SetVS2019
> > if /I "%1"=="VS2017" goto SetVS2017
> > if /I "%1"=="VS2015" goto SetVS2015
> > if /I "%1"=="VS2013" goto SetVS2013
> >@@ -107,27 +108,86 @@ if defined VS140COMNTOOLS (
> > )
> > if /I "%1"=="VS2015" goto SetWinDDK
> >
> >+:SetVS2019
> >+if not defined VS160COMNTOOLS (
> >+ if exist "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" (
> >+ if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2019\BuildTools"
> (
> >+ call "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -products
> >Microsoft.VisualStudio.Product.BuildTools -version 16,17 > vswhereInfo
> >+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> >+ if /i "%%i"=="installationPath" call
> "%%j\VC\Auxiliary\Build\vcvars32.bat"
> >+ )
> >+ del vswhereInfo
> >+ ) else (
> >+ call "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -version 16,17 > vswhereInfo
> >+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> >+ if /i "%%i"=="installationPath" call
> "%%j\VC\Auxiliary\Build\vcvars32.bat"
> >+ )
> >+ del vswhereInfo
> >+ )
> >+ ) else if exist "%ProgramFiles%\Microsoft Visual
> >Studio\Installer\vswhere.exe" (
> >+ if exist "%ProgramFiles%\Microsoft Visual Studio\2019\BuildTools" (
> >+ call "%ProgramFiles%\Microsoft Visual
> >+ Studio\Installer\vswhere.exe" -
> >products Microsoft.VisualStudio.Product.BuildTools -version 16,17 >
> >vswhereInfo
> >+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> >+ if /i "%%i"=="installationPath" call
> "%%j\VC\Auxiliary\Build\vcvars32.bat"
> >+ )
> >+ del vswhereInfo
> >+ ) else (
> >+ call "%ProgramFiles%\Microsoft Visual
> >+ Studio\Installer\vswhere.exe" -
> >version 16,17 > vswhereInfo
> >+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> >+ if /i "%%i"=="installationPath" call
> "%%j\VC\Auxiliary\Build\vcvars32.bat"
> >+ )
> >+ del vswhereInfo
> >+ )
> >+ ) else (
> >+ if /I "%1"=="VS2019" goto ToolNotInstall
> >+ goto SetWinDDK
> >+ )
> >+)
> >+
> >+if defined VCToolsInstallDir (
> >+ if not defined VS2019_PREFIX (
> >+ set "VS2019_PREFIX=%VCToolsInstallDir%"
> >+ )
> >+)
> >+if not defined WINSDK10_PREFIX (
> >+ if defined WindowsSdkVerBinPath (
> >+ set "WINSDK10_PREFIX=%WindowsSdkVerBinPath%"
> >+ ) else if exist "%ProgramFiles(x86)%\Windows Kits\10\bin" (
> >+ set "WINSDK10_PREFIX=%ProgramFiles(x86)%\Windows Kits\10\bin\"
> >+ ) else if exist "%ProgramFiles%\Windows Kits\10\bin" (
> >+ set "WINSDK10_PREFIX=%ProgramFiles%\Windows Kits\10\bin\"
> >+ )
> >+)
>
> In my machine, VS2019 is not installed. Then, WindowsSdkVerBinPath is not
> set.
> So, set "WINSDK10_PREFIX=%ProgramFiles(x86)%\Windows Kits\10\bin\"
> But, I install VS2017. WINSDK10_PREFIX should be set later.
>
> Here, the suggest change is to move WINSDK10_PREFIX setting into
> VCToolsInstallDir check condition.
> WINSDK10_PREFIX is only set when VCToolsInstallDir is defined.
>
> Thanks
> Liming
> >+
> > :SetVS2017
> > if not defined VS150COMNTOOLS (
> > if exist "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" (
> > if exist "%ProgramFiles(x86)%\Microsoft Visual Studio\2017\BuildTools" (
> >- for /f "usebackq tokens=1* delims=: " %%i in
> >(`"%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe" -
> >products Microsoft.VisualStudio.Product.BuildTools`) do (
> >+ call "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -products
> >Microsoft.VisualStudio.Product.BuildTools -version 15,16 > vswhereInfo
> >+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> > if /i "%%i"=="installationPath" call
> "%%j\VC\Auxiliary\Build\vcvars32.bat"
> > )
> >+ del vswhereInfo
> > ) else (
> >- for /f "usebackq tokens=1* delims=: " %%i in
> >(`"%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe"`)
> >do (
> >+ call "%ProgramFiles(x86)%\Microsoft Visual
> >Studio\Installer\vswhere.exe" -version 15,16 > vswhereInfo
> >+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> > if /i "%%i"=="installationPath" call
> "%%j\VC\Auxiliary\Build\vcvars32.bat"
> > )
> >+ del vswhereInfo
> > )
> > ) else if exist "%ProgramFiles%\Microsoft Visual
> >Studio\Installer\vswhere.exe" (
> > if exist "%ProgramFiles%\Microsoft Visual Studio\2017\BuildTools" (
> >- for /f "usebackq tokens=1* delims=: " %%i in
> >(`"%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe"
> >-products
> >Microsoft.VisualStudio.Product.BuildTools`) do (
> >+ call "%ProgramFiles%\Microsoft Visual
> >+ Studio\Installer\vswhere.exe" -
> >products Microsoft.VisualStudio.Product.BuildTools -version 15,16 >
> >vswhereInfo
> >+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> > if /i "%%i"=="installationPath" call
> "%%j\VC\Auxiliary\Build\vcvars32.bat"
> > )
> >+ del vswhereInfo
> > ) else (
> >- for /f "usebackq tokens=1* delims=: " %%i in
> >(`"%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe"`) do (
> >+ call "%ProgramFiles%\Microsoft Visual
> >+ Studio\Installer\vswhere.exe" -
> >version 15,16 > vswhereInfo
> >+ for /f "usebackq tokens=1* delims=: " %%i in (vswhereInfo) do (
> > if /i "%%i"=="installationPath" call
> "%%j\VC\Auxiliary\Build\vcvars32.bat"
> > )
> >+ del vswhereInfo
> > )
> > ) else (
> > if /I "%1"=="VS2017" goto ToolNotInstall diff --git
> >a/BaseTools/toolsetup.bat b/BaseTools/toolsetup.bat index
> >395694fa09..61ebf4ae09 100755
> >--- a/BaseTools/toolsetup.bat
> >+++ b/BaseTools/toolsetup.bat
> >@@ -3,7 +3,7 @@
> > @REM however it may be executed directly from the BaseTools project
> >folder
> > @REM if the file is not executed within a WORKSPACE\BaseTools folder.
> > @REM
> >- at REM Copyright (c) 2006 - 2018, Intel Corporation. All rights
> >reserved.<BR>
> >+ at REM Copyright (c) 2006 - 2019, Intel Corporation. All rights
> >+reserved.<BR>
> > @REM (C) Copyright 2016 Hewlett Packard Enterprise Development
> LP<BR>
> >@REM @REM SPDX-License-Identifier: BSD-2-Clause-Patent @@ -42,6
> +42,12
> >@@ if /I "%1"=="/?" goto Usage
> > set FORCE_REBUILD=TRUE
> > goto loop
> > )
> >+ if /I "%1"=="VS2019" (
> >+ shift
> >+ set VS2019=TRUE
> >+ set VSTool=VS2019
> >+ goto loop
> >+ )
> > if /I "%1"=="VS2017" (
> > shift
> > set VS2017=TRUE
> >@@ -176,7 +182,9 @@ IF NOT exist
> >"%EDK_TOOLS_PATH%\set_vsprefix_envs.bat" (
> > @echo.
> > goto end
> > )
> >-if defined VS2017 (
> >+if defined VS2019 (
> >+ call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2019
> >+) else if defined VS2017 (
> > call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2017
> > ) else if defined VS2015 (
> > call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat VS2015 @@ -444,7
> +452,7
> >@@ goto end
> >
> > :Usage
> > @echo.
> >- echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild |
> >ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]] [VS2017]
> >[VS2015] [VS2013] [VS2012]"
> >+ echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [ Rebuild |
> >ForceRebuild ] [Reconfig] [base_tools_path [edk_tools_path]] [VS2019]
> >[VS2017] [VS2015] [VS2013] [VS2012]"
> > @echo.
> > @echo base_tools_path BaseTools project path, BASE_TOOLS_PATH
> >will be set to this path.
> > @echo edk_tools_path EDK_TOOLS_PATH will be set to this path.
> >@@ -457,12 +465,14 @@ goto end
> > @echo VS2013 Set the env for VS2013 build.
> > @echo VS2015 Set the env for VS2015 build.
> > @echo VS2017 Set the env for VS2017 build.
> >+ @echo VS2019 Set the env for VS2019 build.
> > @echo.
> >
> > :end
> > set REBUILD=
> > set FORCE_REBUILD=
> > set RECONFIG=
> >+set VS2019=
> > set VS2017=
> > set VS2015=
> > set VS2013=
> >diff --git a/edksetup.bat b/edksetup.bat index 5f6028deff..024f57a4b7
> >100755
> >--- a/edksetup.bat
> >+++ b/edksetup.bat
> >@@ -1,7 +1,7 @@
> > @REM @file
> > @REM Windows batch file to setup a WORKSPACE environment
> > @REM
> >- at REM Copyright (c) 2006 - 2016, Intel Corporation. All rights
> >reserved.<BR>
> >+ at REM Copyright (c) 2006 - 2019, Intel Corporation. All rights
> >+reserved.<BR>
> > @REM (C) Copyright 2016 Hewlett Packard Enterprise Development
> LP<BR>
> >@REM SPDX-License-Identifier: BSD-2-Clause-Patent @REM @@ -133,6
> >+133,7 @@ if defined CYGWIN_HOME ( :cygwin_done if /I
> "%1"=="Rebuild"
> >shift if /I "%1"=="ForceRebuild" shift
> >+if /I "%1"=="VS2019" shift
> > if /I "%1"=="VS2017" shift
> > if /I "%1"=="VS2015" shift
> > if /I "%1"=="VS2013" shift
> >@@ -141,7 +142,7 @@ if "%1"=="" goto end
> >
> > :Usage
> > @echo.
> >- @echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [Reconfig]
> >[Rebuild] [ForceRebuild] [VS2017] [VS2015] [VS2013] [VS2012]"
> >+ @echo Usage: "%0 [-h | -help | --help | /h | /help | /?] [Reconfig]
> >+ [Rebuild]
> >[ForceRebuild] [VS2019] [VS2017] [VS2015] [VS2013] [VS2012]"
> > @echo.
> > @echo Reconfig Reinstall target.txt, tools_def.txt and
> build_rule.txt.
> > @echo Rebuild Perform incremental rebuild of BaseTools binaries.
> >@@ -150,6 +151,7 @@ if "%1"=="" goto end
> > @echo VS2013 Set the env for VS2013 build.
> > @echo VS2015 Set the env for VS2015 build.
> > @echo VS2017 Set the env for VS2017 build.
> >+ @echo VS2019 Set the env for VS2019 build.
> > @echo.
> > @echo Note that target.template, tools_def.template and
> >build_rules.template
> > @echo will only be copied to target.txt, tools_def.txt and
> >build_rule.txt
> >--
> >2.21.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#47568): https://edk2.groups.io/g/devel/message/47568
Mute This Topic: https://groups.io/mt/34172666/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list