[edk2-devel] [PATCHv2 0/3] Fix eMMC bus timing switch issue

[Albecki, Mateusz]

SD host controller specification section 3.9 recommends that controller's bus timing
should be switched after card's bus timing has been switched. In current eMMC
driver implementation every host controller switch has been done before call to
EmmcSwitchBusTiming which is causing issues on some eMMC controllers.

In HS200 switch sequence we removed stopping and starting the SD clock when
switching the host controller timing. Stopping the clock before bus timing
switch is only neccessary if preset value enable is set in host controller.
Current code doesn't check if this field is enabled or doesn't support
this feature for any other bus timing change so it has been removed.

Third patch fixes issue with switch to SdMmcMmcLegacy speed mode that was
introduced when we implemented v3 of override protocol. In new flow we allowed
EmmcSwitchToHighSpeed to be called with SdMmcMmcLegacy since all of the logic
in that function is ready to service this speed mode.

Tests performed on patch series v1:
- eMMC enumeration and OS boot in HS400
- eMMC enumeration and OS boot in HS200
- eMMC enumeration and OS boot in high speed SDR 8bit @52MHz

Tests have been performed on 2 eMMC host controllers. One that has been failing
with old driver and one that has been passing with old driver. Both controllers
pass all tests with multiple eMMC devices used.

Note: We were unable to test DDR speed mode because on test machines both new flow
and old flow was failing with this speed. I suspect it is a hardware problem.

Tests performed on patch series v2:
-eMMC enumeration and OS boot in backwards compatible legacy timing.

Performed on single host controller and 2 eMMC devices(Samsung and SanDisk)

Cc: Hao A Wu <hao.a.wu at intel.com>
Cc: Marcin Wojtas <mw at semihalf.com>

Albecki, Mateusz (3):
  MdeModulePkg/SdMmcPciHcDxe: Remove clock stop and start from HS200
    switch
  MdeModulePkg/SdMmcPciHcDxe: Fix bus timing switch sequence
  MdeModulePkg/SdMmcPciHcDxe: Fix SdMmcMmcLegacy bus timing handling

 MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c | 107 ++++++++----------------
 1 file changed, 33 insertions(+), 74 deletions(-)

-- 
2.14.1.windows.1

--------------------------------------------------------------------

Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 | Kapital zakladowy 200.000 PLN.

Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek
przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by
others is strictly prohibited.


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#48113): https://edk2.groups.io/g/devel/message/48113
Mute This Topic: https://groups.io/mt/34299251/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-