[EXTERNAL] [edk2-devel] EDK2 environment setup
Guomin Jiang
guomin.jiang at intel.com
Tue Apr 28 09:35:22 UTC 2020
It is known issue and can refer https://bugzilla.tianocore.org/show_bug.cgi?id=2637 for detail.
It have been fixed in newest repository, you can update to the newest repository and try again.
From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Navdeeppal.Singh at dell.com
Sent: Tuesday, April 28, 2020 5:15 PM
To: spbrogan at outlook.com; devel at edk2.groups.io; sean.brogan at microsoft.com; Bret.Barkelew at microsoft.com; jim.slaughter at sage-micro.com
Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
Hi,
Yes I am using edksetup.bat.
I was able to fix VFR compiler after making path changes.
And I was able to build MdeModulePkg Successfully.
But while building Emulator Pkg. I see the following Linker Error. Do I need to build some other module before building Emulator Pkg.
[cid:image001.jpg at 01D61D83.5E9F0750]
Regards,
Navdeep
-----Original Message-----
From: Sean Brogan <spbrogan at outlook.com<mailto:spbrogan at outlook.com>>
Sent: Tuesday, April 28, 2020 2:28 AM
To: devel at edk2.groups.io<mailto:devel at edk2.groups.io>; Singh, Navdeeppal; sean.brogan at microsoft.com<mailto:sean.brogan at microsoft.com>; Bret.Barkelew at microsoft.com<mailto:Bret.Barkelew at microsoft.com>; jim.slaughter at sage-micro.com<mailto:jim.slaughter at sage-micro.com>
Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
[EXTERNAL EMAIL]
Are you using edksetup.bat? I would have expected this code to set the path for you.
https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat#L134
So without more logs i don't know.
If you want to use "stuart" (my preferred method) I have a commit here for EmulatorPkg which has a platformbuild.py and readme.md that describes the process. This should be committed to edk2 master this week to enable Platform CI for every PR.
Here is the readme and details.
https://github.com/spbrogan/edk2/tree/PlatformAndCoreCIForOvmfArmVirtEmulatorPackages_v10/EmulatorPkg/PlatformCI
Here is the commit you should cherry-pick if you want to try it.
https://github.com/spbrogan/edk2/commit/8bdb9075b52a9d1c196b068729eefd76f068d0a2
Thanks
Sean
On 4/27/2020 1:26 AM, Navdeeppal.Singh at dell.com<mailto:Navdeeppal.Singh at dell.com> wrote:
> Hi,
>
> Thanks for your help.
>
> I am to build base tools and able to generate bin files.
>
> "Build" command is generated.
>
> Later, I am trying to build "EmulatorPkg".
>
> And running into VfrCompile error.
>
> 'VfrCompile' is not recognized as an internal or external command,
>
> operable program or batch file.
>
> NMAKE : fatal error U1077: '"VfrCompile' : return code '0x1'
>
> Stop.
>
> 'VfrCompile' is not recognized as an internal or external command,
>
> operable program or batch file.
>
> I can see VfrCompile.exe generated in "BaseTools".
>
> Attached build log for "Emulator Pkg".
>
> I tried checking the Env Paths .
>
> Regards,
>
> Navdeep
>
> *From:* Sean Brogan <sean.brogan at microsoft.com<mailto:sean.brogan at microsoft.com>>
> *Sent:* Friday, April 24, 2020 12:33 AM
> *To:* devel at edk2.groups.io<mailto:devel at edk2.groups.io>; Singh, Navdeeppal; Bret Barkelew;
> jim.slaughter at sage-micro.com<mailto:jim.slaughter at sage-micro.com>
> *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
> [EXTERNAL EMAIL]
>
> Navdeep,
>
> Yes since the 202002 stable tag there have been submodules introduced
> to the basetools. If you look closely you will see in the CI process
> this required a change where stuart_setup is run before calling
> edk2toolsbuild.py.
>
> https://github.com/tianocore/edk2/commit/e1fbff3ded87704fb0086f9b5fb36
> 8080eb4db51#diff-6973939bf9ad6f6a3082d99ce3b32ff1
>
> If you are using "stuart" to build then that is the suggested path as
> stuar_setup will init your submodules listed in the RequiredSubmodules
> (https://github.com/tianocore/edk2/blob/master/.pytool/CISettings.py#L136).
> Given that the edk2 project and ecosystem has numerous ways to setup
> your environment and build, you can also just make sure your workspace
> is complete prior to running Edk2ToolsBuild.py. In this case you only
> need to run "git submodule update --init"
>
> I just did this and it works fine with VS2019.
>
> Jim,
>
> Just as fyi as I know there are lots of reasons for toolchain selection.
>
> I believe the Visual studio build tools are available free of charge
> (not the IDE but the compilers). Directions here.
> https://microsoft.github.io/mu/CodeDevelopment/prerequisites/#visual-s
> tudio-2019-preferred
>
> Thanks
>
> Sean
>
> *From:* devel at edk2.groups.io<mailto:devel at edk2.groups.io> <mailto:devel at edk2.groups.io>
> <devel at edk2.groups.io <mailto:devel at edk2.groups.io<mailto:devel at edk2.groups.io%20%3cmailto:devel at edk2.groups.io>>> *On Behalf Of
> *Navdeeppal.Singh via groups.io
> *Sent:* Thursday, April 23, 2020 9:14 AM
> *To:* Bret Barkelew <Bret.Barkelew at microsoft.com
> <mailto:Bret.Barkelew at microsoft.com>>; devel at edk2.groups.io<mailto:devel at edk2.groups.io>
> <mailto:devel at edk2.groups.io>
> *Subject:* Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
> Hi Bret,
>
> Yes PIP requirements are up to date.
>
> On further digging through the logging file BASETOOLS_BUILD.txt.
>
> INFO - subprocess not exit successfully
>
> INFO - Error while execute command 'nmake all' in direcotry
> C:\edk2\BaseTools\Source\C\BrotliCompress
>
> Regards,
>
> Navdeep
>
> *From:* Bret Barkelew <Bret.Barkelew at microsoft.com
> <mailto:Bret.Barkelew at microsoft.com>>
> *Sent:* Thursday, April 23, 2020 9:37 PM
> *To:* devel at edk2.groups.io<mailto:devel at edk2.groups.io> <mailto:devel at edk2.groups.io>; Singh,
> Navdeeppal
> *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
> [EXTERNAL EMAIL]
>
> Have you installed the up-to-date Python requirements? "pip install
> -upgrade -r pip-requirements.txt"?
>
> That's the first thing I would check. Otherwise, happy to look at the
> problem with you.
>
> - Bret
>
> *From: *NAVDEEPPAL_SINGH via groups.io
> <mailto:NAVDEEPPAL_SINGH=DELL.COM at groups.io>
> *Sent: *Thursday, April 23, 2020 6:05 AM
> *To: *devel at edk2.groups.io<mailto:*devel at edk2.groups.io> <mailto:devel at edk2.groups.io>
> *Subject: *[EXTERNAL] [edk2-devel] EDK2 environment setup
>
> I am trying to setup EDK2 environment setup from Tianocore/EDK2.
> While doing the Base Tool setup. After running
> BaseTool/EDK2ToolsBuild.py -t VS2019 Getting following error :-
> c:\edk2\BaseTools>python Edk2ToolsBuild.py -t VS2019 SECTION - Init
> SDE SECTION - Loading Plugins SECTION - Start Invocable Tool Traceback
> (most recent call last):
> File "Edk2ToolsBuild.py", line 177, in <module>
> main()
> File "Edk2ToolsBuild.py", line 173, in main
> Edk2ToolsBuild().Invoke()
> File "C:\Program
> Files\Python38\lib\site-packages\edk2toolext\base_abstract_invocable.p
> y", line 141, in Invoke
> retcode = self.Go()
> File "Edk2ToolsBuild.py", line 139, in Go
> raise Exception("Failed to build.")
> Exception: Failed to build.
>
> set EDK_TOOLS_PATH=C:\edk2\BaseTools
> set EDK_TOOLS_BIN=C:\edk2\BaseTools\Bin\Win32
> Can some one help
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#58218): https://edk2.groups.io/g/devel/message/58218
Mute This Topic: https://groups.io/mt/73221341/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/edk2-devel-archive/attachments/20200428/629cc787/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 190382 bytes
Desc: image001.jpg
URL: <http://listman.redhat.com/archives/edk2-devel-archive/attachments/20200428/629cc787/attachment.jpg>
More information about the edk2-devel-archive
mailing list