[edk2-devel] [PATCH edk2-platforms 5/7] SbsaQemu: AcpiDxe: Create SSDT table at runtime
Leif Lindholm
leif at nuviainc.com
Thu Aug 20 12:09:45 UTC 2020
On Wed, Aug 19, 2020 at 20:00:03 +0530, Tanmay Jagdale wrote:
> - Add support to create SSDT table at runtime. Since SSDT
> table is a data table, added a few helper macros to create
> the AML entries.
> - Also added a function to calculate the length of Packages.
>
> Signed-off-by: Tanmay Jagdale <tanmay.jagdale at linaro.org>
> ---
> .../Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.c | 144 ++++++++++++++++++
> .../Include/IndustryStandard/SbsaQemuAcpi.h | 29 ++++
> 2 files changed, 173 insertions(+)
>
> diff --git a/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.c b/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.c
> index 569cda8b6474..d90ce0c2a718 100644
> --- a/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.c
> +++ b/Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.c
> @@ -9,6 +9,7 @@
> #include <IndustryStandard/Acpi.h>
> #include <IndustryStandard/Acpi10.h>
> #include <IndustryStandard/Acpi60.h>
> +#include <IndustryStandard/AcpiAml.h>
> #include <IndustryStandard/SbsaQemuAcpi.h>
> #include <Library/AcpiLib.h>
> #include <Library/BaseMemoryLib.h>
> @@ -202,6 +203,144 @@ AddMadtTable (
> return Status;
> }
>
> +/*
> + * Function to calculate the PkgLength field in ACPI tables
> + */
> +STATIC
> +UINT32
> +SetPkgLength (
> + IN UINT8 *TablePtr,
> + IN UINT32 Length
> +)
> +{
> + UINT8 ByteCount;
> + UINT8 *PkgLeadByte = TablePtr;
> +
> + if (Length < 64) {
> + *TablePtr = Length;
> + return 1;
> + }
> +
> + // Set the LSB of Length in PkgLeadByte and advance Length
> + *PkgLeadByte = Length & 0xF;
> + Length = Length >> 4;
> +
> + while (Length) {
> + TablePtr++;
> + *TablePtr = (Length & 0xFF);
> + Length = (Length >> 8);
> + }
> +
> + // Calculate the number of bytes the Length field uses
> + // and set the ByteCount field in PkgLeadByte.
> + ByteCount = (TablePtr - PkgLeadByte) & 0xF;
> + *PkgLeadByte |= (ByteCount << 6);
> +
> + return ByteCount + 1;
> +}
> +
> +/*
> + * A function that adds SSDT ACPI table.
> + */
> +EFI_STATUS
> +AddSsdtTable (
> + IN EFI_ACPI_TABLE_PROTOCOL *AcpiTable
> + )
> +{
> + EFI_STATUS Status;
> + UINTN TableHandle;
> + UINT32 TableSize;
> + EFI_PHYSICAL_ADDRESS PageAddress;
> + UINT8 *New;
> + UINT32 CpuId;
> + UINT32 Offset;
> + UINT8 ScopeOpName[] = SBSAQEMU_ACPI_SCOPE_NAME;
> + UINT32 NumCores = PcdGet32 (PcdCoreCount);
> +
> + EFI_ACPI_DESCRIPTION_HEADER Header =
> + SBSAQEMU_ACPI_HEADER (
> + EFI_ACPI_6_0_SECONDARY_SYSTEM_DESCRIPTION_TABLE_SIGNATURE,
> + EFI_ACPI_DESCRIPTION_HEADER,
> + EFI_ACPI_6_0_SECONDARY_SYSTEM_DESCRIPTION_TABLE_REVISION);
> +
> + SBSAQEMU_ACPI_CPU_DEVICE CpuDevice = {
> + { AML_EXT_OP, AML_EXT_DEVICE_OP }, /* Device () */
> + SBSAQEMU_ACPI_CPU_DEV_LEN, /* Length */
> + SBSAQEMU_ACPI_CPU_DEV_NAME, /* Device Name "C000" */
> + SBSAQEMU_ACPI_CPU_HID, /* Name (HID, "ACPI0007") */
> + SBSAQEMU_ACPI_CPU_UID, /* Name (UID, 0) */
> + };
> +
> + // Calculate the new table size based on the number of cores
> + TableSize = sizeof (EFI_ACPI_DESCRIPTION_HEADER) +
> + SBSAQEMU_ACPI_SCOPE_OP_MAX_LENGTH + sizeof (ScopeOpName) +
> + (sizeof (CpuDevice) * NumCores);
Above line contains a tab. <edk2>/BaseTools/Scripts/PatchCheck.py will
find this (and some other issues) for you. Please run over whole set
and fix any reporeted issues before submitting v2.
/
Leif
> +
> + Status = gBS->AllocatePages (
> + AllocateAnyPages,
> + EfiACPIReclaimMemory,
> + EFI_SIZE_TO_PAGES (TableSize),
> + &PageAddress
> + );
> + if (EFI_ERROR(Status)) {
> + DEBUG((EFI_D_ERROR, "Failed to allocate pages for SSDT table\n"));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + New = (UINT8 *)(UINTN) PageAddress;
> + ZeroMem (New, TableSize);
> +
> + // Add the ACPI Description table header
> + CopyMem (New, &Header, sizeof (EFI_ACPI_DESCRIPTION_HEADER));
> + ((EFI_ACPI_DESCRIPTION_HEADER*) New)->Length = TableSize;
> + New += sizeof (EFI_ACPI_DESCRIPTION_HEADER);
> +
> + // Insert the top level ScopeOp
> + *New = AML_SCOPE_OP;
> + New++;
> + Offset = SetPkgLength (New,
> + (TableSize - sizeof (EFI_ACPI_DESCRIPTION_HEADER) - 1));
> + New += Offset;
> + CopyMem (New, &ScopeOpName, sizeof (ScopeOpName));
> + New += sizeof (ScopeOpName);
> +
> + // Add new Device structures for the Cores
> + for (CpuId = 0; CpuId < NumCores; CpuId++) {
> + SBSAQEMU_ACPI_CPU_DEVICE *CpuDevicePtr;
> + UINT8 CpuIdByte1, CpuIdByte2, CpuIdByte3;
> +
> + CopyMem (New, &CpuDevice, sizeof (SBSAQEMU_ACPI_CPU_DEVICE));
> + CpuDevicePtr = (SBSAQEMU_ACPI_CPU_DEVICE *) New;
> +
> + CpuIdByte1 = CpuId & 0xF;
> + CpuIdByte2 = (CpuId >> 4) & 0xF;
> + CpuIdByte3 = (CpuId >> 8) & 0xF;
> +
> + CpuDevicePtr->dev_name[1] = SBSAQEMU_ACPI_ITOA(CpuIdByte3);
> + CpuDevicePtr->dev_name[2] = SBSAQEMU_ACPI_ITOA(CpuIdByte2);
> + CpuDevicePtr->dev_name[3] = SBSAQEMU_ACPI_ITOA(CpuIdByte1);
> +
> + CpuDevicePtr->uid[6] = CpuIdByte1 | CpuIdByte2;
> + CpuDevicePtr->uid[7] = CpuIdByte3;
> + New += sizeof (SBSAQEMU_ACPI_CPU_DEVICE);
> + }
> +
> + // Perform Checksum
> + AcpiPlatformChecksum ((UINT8*) PageAddress, TableSize);
> +
> + Status = AcpiTable->InstallAcpiTable (
> + AcpiTable,
> + (EFI_ACPI_COMMON_HEADER *)PageAddress,
> + TableSize,
> + &TableHandle
> + );
> + if (EFI_ERROR(Status)) {
> + DEBUG((EFI_D_ERROR, "Failed to install SSDT table\n"));
> + }
> +
> + return Status;
> +}
> +
> EFI_STATUS
> EFIAPI
> InitializeSbsaQemuAcpiDxe (
> @@ -231,5 +370,10 @@ InitializeSbsaQemuAcpiDxe (
> DEBUG((EFI_D_ERROR, "Failed to add MADT table\n"));
> }
>
> + Status = AddSsdtTable (AcpiTable);
> + if (EFI_ERROR(Status)) {
> + DEBUG((EFI_D_ERROR, "Failed to add SSDT table\n"));
> + }
> +
> return EFI_SUCCESS;
> }
> diff --git a/Silicon/Qemu/SbsaQemu/Include/IndustryStandard/SbsaQemuAcpi.h b/Silicon/Qemu/SbsaQemu/Include/IndustryStandard/SbsaQemuAcpi.h
> index 7a9a0061675f..60acc083ddbb 100644
> --- a/Silicon/Qemu/SbsaQemu/Include/IndustryStandard/SbsaQemuAcpi.h
> +++ b/Silicon/Qemu/SbsaQemu/Include/IndustryStandard/SbsaQemuAcpi.h
> @@ -43,4 +43,33 @@
> #define SBSAQEMU_PCI_SEG0_BUSNUM_MIN 0x00
> #define SBSAQEMU_PCI_SEG0_BUSNUM_MAX 0xFF
>
> +#define SBSAQEMU_ACPI_SCOPE_OP_MAX_LENGTH 5
> +
> +#define SBSAQEMU_ACPI_SCOPE_NAME { '_', 'S', 'B', '_' }
> +
> +#define SBSAQEMU_ACPI_CPU_DEV_LEN 0x1C
> +#define SBSAQEMU_ACPI_CPU_DEV_NAME { 'C', '0', '0', '0' }
> +
> +// Macro to convert Integer to Character
> +#define SBSAQEMU_ACPI_ITOA(Byte) (0x30 + (Byte > 9 ? (Byte + 1) : Byte))
> +
> +#define SBSAQEMU_ACPI_CPU_HID { \
> + AML_NAME_OP, AML_NAME_CHAR__, 'H', 'I', 'D', \
> + AML_STRING_PREFIX, 'A', 'C', 'P', 'I', '0', '0', '0', '7', \
> + AML_ZERO_OP \
> + }
> +
> +#define SBSAQEMU_ACPI_CPU_UID { \
> + AML_NAME_OP, AML_NAME_CHAR__, 'U', 'I', 'D', AML_BYTE_PREFIX, \
> + AML_ZERO_OP, AML_ZERO_OP \
> + }
> +
> +typedef struct {
> + UINT8 device_header[2];
> + UINT8 length;
> + UINT8 dev_name[4];
> + UINT8 hid[15];
> + UINT8 uid[8];
> +} SBSAQEMU_ACPI_CPU_DEVICE;
> +
> #endif
> --
> 2.28.0
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#64498): https://edk2.groups.io/g/devel/message/64498
Mute This Topic: https://groups.io/mt/76287464/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list