回复: [edk2-devel] [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler: Fix a bug about log lost
gaoliming
gaoliming at byosoft.com.cn
Fri Dec 18 01:09:35 UTC 2020
Ming:
This change uses the accurate point to exit boot service. It is a good
enhancement.
For the patch, I have one comment that SerialStatusCodeReportWorker()
should call mRscHandlerProtocol unregister itself.
If there are more than one Status code handlers to be unregistered at the
exit boot service, each handler should unregister itself.
Thanks
Liming
> -----邮件原件-----
> 发件人: bounce+27952+69130+4905953+8761045 at groups.io
> <bounce+27952+69130+4905953+8761045 at groups.io> 代表 Tan, Ming
> 发送时间: 2020年12月17日 21:59
> 收件人: devel at edk2.groups.io
> 抄送: Dandan Bi <dandan.bi at intel.com>; Liming Gao
> <gaoliming at byosoft.com.cn>
> 主题: [edk2-devel] [PATCH v5] MdeModulePkg/Universal/StatusCodeHandler:
> Fix a bug about log lost
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3126
>
> 1. If use PeiDxeDebugLibReportStatusCode as DebugLib, then some logs
> after ExitBootService() will be lost.
> 2. The root cause:
> 2.1 The original code will register an unregister function
> of gEfiEventExitBootServicesGuid, this unregister function will call
> EFI_RSC_HANDLER_PROTOCOL->Unregister and does not support log through
> serial port.
> 2.2 And some other drivers also register call back funtions of
> gEfiEventExitBootServicesGuid.
> 2.3 Then after the unregister function is called, other call back
> functions can't out log if them use RSC as DebugLib.
> 3. The DxeMain will report status code EFI_SW_BS_PC_EXIT_BOOT_SERVICES
> after notify all the call back functions of
> gEfiEventExitBootServicesGuid.
> 4. Solution: the StatusCodeHandlerRuntimeDxe.c will not register an
> unregister function of gEfiEventExitBootServicesGuid, but unregister it
> after receive the status code of EFI_SW_BS_PC_EXIT_BOOT_SERVICES.
>
> Cc: Dandan Bi <dandan.bi at intel.com>
> Cc: Liming Gao <gaoliming at byosoft.com.cn>
> Signed-off-by: Ming Tan <ming.tan at intel.com>
> ---
> V5: Fix an unused var bug and compile error using GCC.
> V4: Fix a spell bug in code comment, change 'a' to 'an' before
'unregister'.
> V3: Fix a spell bug in commit message, change 'a' to 'an' before
'unregister'.
> V2: Add the REF link in commit message.
>
> .../RuntimeDxe/SerialStatusCodeWorker.c | 10 ++++++++++
> .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.c | 17 +----------------
> .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.h | 11 +++++++++++
> 3 files changed, 22 insertions(+), 16 deletions(-)
>
> diff --git
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> index 0b98e7ec63..f7ab71e32a 100644
> ---
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> +++
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/SerialStatusCo
> deWorker.c
> @@ -151,6 +151,16 @@ SerialStatusCodeReportWorker (
> //
>
> SerialPortWrite ((UINT8 *) Buffer, CharCount);
>
>
>
> + //
>
> + // If register an unregister function of gEfiEventExitBootServicesGuid,
>
> + // then some log called in ExitBootServices() will be lost,
>
> + // so unregister the handler after receive the value of exit boot
service.
>
> + //
>
> + if ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE
> &&
>
> + Value == (EFI_SOFTWARE_EFI_BOOT_SERVICE |
> EFI_SW_BS_PC_EXIT_BOOT_SERVICES)) {
>
> + UnregisterBootTimeHandlers();
>
> + }
>
> +
>
> return EFI_SUCCESS;
>
> }
>
>
>
> diff --git
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> index a8c0fe5b71..2e11c1f4d2 100644
> ---
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> +++
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.c
> @@ -10,23 +10,17 @@
> #include "StatusCodeHandlerRuntimeDxe.h"
>
>
>
> EFI_EVENT mVirtualAddressChangeEvent = NULL;
>
> -static EFI_EVENT mExitBootServicesEvent = NULL;
>
> EFI_RSC_HANDLER_PROTOCOL *mRscHandlerProtocol = NULL;
>
>
>
> /**
>
> Unregister status code callback functions only available at boot time
from
>
> report status code router when exiting boot services.
>
>
>
> - @param Event Event whose notification function is being
> invoked.
>
> - @param Context Pointer to the notification function's context,
> which is
>
> - always zero in current implementation.
>
> -
>
> **/
>
> VOID
>
> EFIAPI
>
> UnregisterBootTimeHandlers (
>
> - IN EFI_EVENT Event,
>
> - IN VOID *Context
>
> + VOID
>
> )
>
> {
>
> if (PcdGetBool (PcdStatusCodeUseSerial)) {
>
> @@ -178,15 +172,6 @@ StatusCodeHandlerRuntimeDxeEntry (
> mRscHandlerProtocol->Register (RtMemoryStatusCodeReportWorker,
> TPL_HIGH_LEVEL);
>
> }
>
>
>
> - Status = gBS->CreateEventEx (
>
> - EVT_NOTIFY_SIGNAL,
>
> - TPL_NOTIFY,
>
> - UnregisterBootTimeHandlers,
>
> - NULL,
>
> - &gEfiEventExitBootServicesGuid,
>
> - &mExitBootServicesEvent
>
> - );
>
> -
>
> Status = gBS->CreateEventEx (
>
> EVT_NOTIFY_SIGNAL,
>
> TPL_NOTIFY,
>
> diff --git
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> index fd4689c2d7..f1789dc538 100644
> ---
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> +++
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHa
> ndlerRuntimeDxe.h
> @@ -118,4 +118,15 @@ RtMemoryStatusCodeReportWorker (
> IN EFI_STATUS_CODE_DATA *Data OPTIONAL
>
> );
>
>
>
> +/**
>
> + Unregister status code callback functions only available at boot time
from
>
> + report status code router when exiting boot services.
>
> +
>
> +**/
>
> +VOID
>
> +EFIAPI
>
> +UnregisterBootTimeHandlers (
>
> + VOID
>
> + );
>
> +
>
> #endif
>
> --
> 2.24.0.windows.2
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#69130): https://edk2.groups.io/g/devel/message/69130
> Mute This Topic: https://groups.io/mt/79036460/4905953
> Group Owner: devel+owner at edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub
> [gaoliming at byosoft.com.cn]
> -=-=-=-=-=-=
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#69160): https://edk2.groups.io/g/devel/message/69160
Mute This Topic: https://groups.io/mt/79052112/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list