[edk2-devel] [PATCH v3 19/78] MdeModulePkg/UsbMass: Fix various typos
Philippe Mathieu-Daudé
philmd at redhat.com
Fri Feb 7 01:07:32 UTC 2020
From: Antoine Coeur <coeur at gmx.fr>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang at intel.com>
Cc: Hao A Wu <hao.a.wu at intel.com>
Cc: Ray Ni <ray.ni at intel.com>
Signed-off-by: Antoine Coeur <coeur at gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd at redhat.com>
Acked-by: Liming Gao <liming.gao at intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd at redhat.com>
---
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h | 4 ++--
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h | 4 ++--
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h | 2 +-
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h | 2 +-
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c | 4 ++--
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c | 4 ++--
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c | 4 ++--
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c | 4 ++--
8 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
index 2b89c92724a8..f34a41284e4c 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
@@ -77,7 +77,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
// Mass command timeout, refers to specification[USB20-9.2.6.1]
//
// USB2.0 Spec define the up-limit timeout 5s for all command. USB floppy,
-// USB CD-Rom and iPod devices are much slower than USB key when reponse
+// USB CD-Rom and iPod devices are much slower than USB key when response
// most of commands, So we set 5s as timeout here.
//
#define USB_BOOT_GENERAL_CMD_TIMEOUT (5 * USB_MASS_1_SECOND)
@@ -213,7 +213,7 @@ typedef struct {
This function get the parameters for the USB mass storage media,
It is used both to initialize the media during the Start() phase
of Driver Binding Protocol and to re-initialize it when the media is
- changed. Althought the RemoveableMedia is unlikely to change,
+ changed. Although the RemoveableMedia is unlikely to change,
it is also included here.
@param UsbMass The device to retrieve disk gemotric.
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h
index ea03cf7e2fd4..3ef8f240a2c1 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h
@@ -14,14 +14,14 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
extern USB_MASS_TRANSPORT mUsbBotTransport;
//
-// Usb Bulk-Only class specfic request
+// Usb Bulk-Only class specific request
//
#define USB_BOT_RESET_REQUEST 0xFF ///< Bulk-Only Mass Storage Reset
#define USB_BOT_GETLUN_REQUEST 0xFE ///< Get Max Lun
#define USB_BOT_CBW_SIGNATURE 0x43425355 ///< dCBWSignature, tag the packet as CBW
#define USB_BOT_CSW_SIGNATURE 0x53425355 ///< dCSWSignature, tag the packet as CSW
#define USB_BOT_MAX_LUN 0x0F ///< Lun number is from 0 to 15
-#define USB_BOT_MAX_CMDLEN 16 ///< Maxium number of command from command set
+#define USB_BOT_MAX_CMDLEN 16 ///< Maximum number of command from command set
//
// Usb BOT command block status values
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h
index 287c0330f61e..b79b9c243630 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.h
@@ -1,5 +1,5 @@
/** @file
- Defination for the USB mass storage Control/Bulk/Interrupt (CBI) transport,
+ Definition for the USB mass storage Control/Bulk/Interrupt (CBI) transport,
according to USB Mass Storage Class Control/Bulk/Interrupt (CBI) Transport, Revision 1.1.
Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h
index 9f63deeae3db..283bed7055a0 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.h
@@ -48,7 +48,7 @@ USBMassDriverBindingSupported (
/**
Starts the USB mass storage device with this driver.
- This function consumes USB I/O Portocol, intializes USB mass storage device,
+ This function consumes USB I/O Protocol, initializes USB mass storage device,
installs Block I/O Protocol, and submits Asynchronous Interrupt
Transfer to manage the USB mass storage device.
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
index 600896b6a214..aab4061e183c 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
@@ -197,7 +197,7 @@ UsbBootExecCmd (
//
// If ExecCommand() returns no error and CmdResult is success,
- // then the commnad transfer is successful.
+ // then the command transfer is successful.
//
if ((CmdResult == USB_MASS_CMD_SUCCESS) && !EFI_ERROR (Status)) {
return EFI_SUCCESS;
@@ -610,7 +610,7 @@ UsbScsiModeSense (
This function get the parameters for the USB mass storage media,
It is used both to initialize the media during the Start() phase
of Driver Binding Protocol and to re-initialize it when the media is
- changed. Althought the RemoveableMedia is unlikely to change,
+ changed. Although the RemoveableMedia is unlikely to change,
it is also included here.
@param UsbMass The device to retrieve disk gemotric.
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
index 98d2ba99688b..1e878a1bdd1d 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
@@ -326,7 +326,7 @@ UsbBotGetStatus (
for (Index = 0; Index < USB_BOT_RECV_CSW_RETRY; Index++) {
//
- // Attemp to the read Command Status Wrapper from bulk in endpoint
+ // Attempt to the read Command Status Wrapper from bulk in endpoint
//
ZeroMem (&Csw, sizeof (USB_BOT_CSW));
Result = 0;
@@ -553,7 +553,7 @@ UsbBotGetMaxLun (
UsbBot = (USB_BOT_PROTOCOL *) Context;
//
- // Issue a class specific Bulk-Only Mass Storage get max lun reqest.
+ // Issue a class specific Bulk-Only Mass Storage get max lun request.
// according to section 3.2 of USB Mass Storage Class Bulk-Only Transport Spec, v1.0.
//
Request.RequestType = 0xA1;
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c
index 1e5508c75674..477f0536d673 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassCbi.c
@@ -305,7 +305,7 @@ UsbCbiDataTransfer (
if (TransStatus == EFI_USB_ERR_NAK) {
//
// The device can NAK the host if either the data/buffer isn't
- // aviable or the command is in-progress.
+ // available or the command is in-progress.
// If data are partially transferred, we just ignore NAK and continue.
// If all data have been transferred and status is NAK, then we retry for several times.
// If retry exceeds the USB_CBI_MAX_RETRY, then return error status.
@@ -378,7 +378,7 @@ UsbCbiGetStatus (
Timeout = Timeout / USB_MASS_1_MILLISECOND;
//
- // Attemp to the read the result from interrupt endpoint
+ // Attempt to the read the result from interrupt endpoint
//
for (Retry = 0; Retry < USB_CBI_MAX_RETRY; Retry++) {
TransStatus = 0;
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
index 0dcbc5da2cb8..bbd19e044748 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
@@ -367,7 +367,7 @@ UsbMassInitMedia (
}
/**
- Initilize the USB Mass Storage transport.
+ Initialize the USB Mass Storage transport.
This function tries to find the matching USB Mass Storage transport
protocol for USB device. If found, initializes the matching transport.
@@ -770,7 +770,7 @@ USBMassDriverBindingSupported (
/**
Starts the USB mass storage device with this driver.
- This function consumes USB I/O Portocol, intializes USB mass storage device,
+ This function consumes USB I/O Protocol, initializes USB mass storage device,
installs Block I/O Protocol, and submits Asynchronous Interrupt
Transfer to manage the USB mass storage device.
--
2.21.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#53916): https://edk2.groups.io/g/devel/message/53916
Mute This Topic: https://groups.io/mt/71039542/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list