[edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH 02/12] MdeModulePkg/PciBusDxe: Setup PCI Express init phase
Javeed, Ashraf
ashraf.javeed at intel.com
Fri Feb 7 20:04:37 UTC 2020
References:-
https://bugzilla.tianocore.org/show_bug.cgi?id=1954
https://bugzilla.tianocore.org/show_bug.cgi?id=2194
https://bugzilla.tianocore.org/show_bug.cgi?id=2313
https://bugzilla.tianocore.org/show_bug.cgi?id=2499
https://bugzilla.tianocore.org/show_bug.cgi?id=2500
This code change represents the preparation of phase for initializing
the PCI Express features at the end of PCI enumeration phase.
Signed-off-by: Ashraf Javeed <ashraf.javeed at intel.com>
Cc: Jian J Wang <jian.j.wang at intel.com>
Cc: Hao A Wu <hao.a.wu at intel.com>
Cc: Ray Ni <ray.ni at intel.com>
---
MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c | 181 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------
MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.h | 23 +++++++++++++++++++++++
2 files changed, 169 insertions(+), 35 deletions(-)
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c b/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
index b7832c6..07ee9ba 100644
--- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
+++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
@@ -1,7 +1,7 @@
/** @file
Supporting functions implementation for PCI devices management.
-Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2020, Intel Corporation. All rights reserved.<BR>
(C) Copyright 2018 Hewlett Packard Enterprise Development LP<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@@ -597,7 +597,7 @@ DeRegisterPciDevice (
}
/**
- Start to manage the PCI device on the specified root bridge or PCI-PCI Bridge.
+ Start the PCI root Ports or PCI-PCI Bridge only.
@param Controller The root bridge handle.
@param RootBridge A pointer to the PCI_IO_DEVICE.
@@ -612,7 +612,82 @@ DeRegisterPciDevice (
**/
EFI_STATUS
-StartPciDevicesOnBridge (
+EnablePciBridges (
+ IN EFI_HANDLE Controller,
+ IN PCI_IO_DEVICE *RootBridge
+ )
+
+{
+ PCI_IO_DEVICE *PciIoDevice;
+ EFI_STATUS Status;
+ LIST_ENTRY *CurrentLink;
+ UINT64 Supports;
+
+ PciIoDevice = NULL;
+ CurrentLink = RootBridge->ChildList.ForwardLink;
+
+ while (CurrentLink != NULL && CurrentLink != &RootBridge->ChildList) {
+
+ PciIoDevice = PCI_IO_DEVICE_FROM_LINK (CurrentLink);
+
+ //
+ // check if the device has been assigned with required resource
+ // and registered
+ //
+ if (!PciIoDevice->Registered && !PciIoDevice->Allocated) {
+ return EFI_NOT_READY;
+ }
+
+ if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {
+ Status = EnablePciBridges (
+ Controller,
+ PciIoDevice
+ );
+
+ PciIoDevice->PciIo.Attributes (
+ &(PciIoDevice->PciIo),
+ EfiPciIoAttributeOperationSupported,
+ 0,
+ &Supports
+ );
+ Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
+ PciIoDevice->PciIo.Attributes (
+ &(PciIoDevice->PciIo),
+ EfiPciIoAttributeOperationEnable,
+ Supports,
+ NULL
+ );
+
+ }
+
+ CurrentLink = CurrentLink->ForwardLink;
+ }
+
+ if (PciIoDevice == NULL) {
+ return EFI_NOT_FOUND;
+ } else {
+ return EFI_SUCCESS;
+ }
+}
+
+
+/**
+ Register to manage the PCI device on the specified root bridge or PCI-PCI Bridge.
+
+ @param Controller The root bridge handle.
+ @param RootBridge A pointer to the PCI_IO_DEVICE.
+ @param RemainingDevicePath A pointer to the EFI_DEVICE_PATH_PROTOCOL.
+ @param NumberOfChildren Children number.
+ @param ChildHandleBuffer A pointer to the child handle buffer.
+
+ @retval EFI_NOT_READY Device is not allocated.
+ @retval EFI_UNSUPPORTED Device only support PCI-PCI bridge.
+ @retval EFI_NOT_FOUND Can not find the specific device.
+ @retval EFI_SUCCESS Success to start Pci devices on bridge.
+
+**/
+EFI_STATUS
+RegisterPciDevicesOnBridge (
IN EFI_HANDLE Controller,
IN PCI_IO_DEVICE *RootBridge,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath,
@@ -626,7 +701,6 @@ StartPciDevicesOnBridge (
EFI_DEVICE_PATH_PROTOCOL *CurrentDevicePath;
EFI_STATUS Status;
LIST_ENTRY *CurrentLink;
- UINT64 Supports;
PciIoDevice = NULL;
CurrentLink = RootBridge->ChildList.ForwardLink;
@@ -681,7 +755,7 @@ StartPciDevicesOnBridge (
// If it is a PPB
//
if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {
- Status = StartPciDevicesOnBridge (
+ Status = RegisterPciDevicesOnBridge (
Controller,
PciIoDevice,
CurrentDevicePath,
@@ -689,20 +763,6 @@ StartPciDevicesOnBridge (
ChildHandleBuffer
);
- PciIoDevice->PciIo.Attributes (
- &(PciIoDevice->PciIo),
- EfiPciIoAttributeOperationSupported,
- 0,
- &Supports
- );
- Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
- PciIoDevice->PciIo.Attributes (
- &(PciIoDevice->PciIo),
- EfiPciIoAttributeOperationEnable,
- Supports,
- NULL
- );
-
return Status;
} else {
@@ -733,28 +793,13 @@ StartPciDevicesOnBridge (
}
if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {
- Status = StartPciDevicesOnBridge (
+ Status = RegisterPciDevicesOnBridge (
Controller,
PciIoDevice,
RemainingDevicePath,
NumberOfChildren,
ChildHandleBuffer
);
-
- PciIoDevice->PciIo.Attributes (
- &(PciIoDevice->PciIo),
- EfiPciIoAttributeOperationSupported,
- 0,
- &Supports
- );
- Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
- PciIoDevice->PciIo.Attributes (
- &(PciIoDevice->PciIo),
- EfiPciIoAttributeOperationEnable,
- Supports,
- NULL
- );
-
}
CurrentLink = CurrentLink->ForwardLink;
@@ -768,6 +813,72 @@ StartPciDevicesOnBridge (
}
}
+/**
+ Start to manage the PCI device on the specified root bridge or PCI-PCI Bridge.
+
+ @param Controller The root bridge handle.
+ @param RootBridge A pointer to the PCI_IO_DEVICE.
+ @param RemainingDevicePath A pointer to the EFI_DEVICE_PATH_PROTOCOL.
+ @param NumberOfChildren Children number.
+ @param ChildHandleBuffer A pointer to the child handle buffer.
+
+ @retval EFI_NOT_READY Device is not allocated.
+ @retval EFI_UNSUPPORTED Device only support PCI-PCI bridge.
+ @retval EFI_NOT_FOUND Can not find the specific device.
+ @retval EFI_SUCCESS Success to start Pci devices on bridge.
+
+**/
+EFI_STATUS
+StartPciDevicesOnBridge (
+ IN EFI_HANDLE Controller,
+ IN PCI_IO_DEVICE *RootBridge,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath,
+ IN OUT UINT8 *NumberOfChildren,
+ IN OUT EFI_HANDLE *ChildHandleBuffer
+ )
+
+{
+ EFI_STATUS Status;
+
+ //
+ // first register all the PCI devices
+ //
+ Status = RegisterPciDevicesOnBridge (
+ Controller,
+ RootBridge,
+ RemainingDevicePath,
+ NumberOfChildren,
+ ChildHandleBuffer
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ } else {
+ //
+ // the late configuration of PCI Express features
+ // the platform is required to indicate its requirement for the initialization
+ // of PCI Express features by publishing its protocol
+ //
+ if (
+ gFullEnumeration
+ && IsPciExpressProtocolPresent ()
+ ) {
+
+ Status = EnumeratePciExpressFeatures (
+ Controller,
+ RootBridge
+ );
+ }
+ //
+ // finally start those PCI bridge port devices only
+ //
+ return EnablePciBridges (
+ Controller,
+ RootBridge
+ );
+ }
+}
+
/**
Start to manage all the PCI devices it found previously under
the entire host bridge.
diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.h b/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.h
index 2eff8aa..9b7e51f 100644
--- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.h
+++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciFeatureSupport.h
@@ -223,4 +223,27 @@ typedef struct {
}PCI_EXPRESS_FEATURE_INITIALIZATION_POINT;
+
+/**
+ Enumerate all the nodes of the specified root bridge or PCI-PCI Bridge, to
+ configure the other PCI features.
+
+ @param RootBridge A pointer to the PCI_IO_DEVICE.
+
+ @retval EFI_SUCCESS The other PCI features configuration during enumeration
+ of all the nodes of the PCI root bridge instance were
+ programmed in PCI-compliance pattern along with the
+ device-specific policy, as applicable.
+ @retval EFI_UNSUPPORTED One of the override operation maong the nodes of
+ the PCI hierarchy resulted in a incompatible address
+ range.
+ @retval EFI_INVALID_PARAMETER The override operation is performed with invalid input
+ parameters.
+**/
+EFI_STATUS
+EnumeratePciExpressFeatures (
+ IN EFI_HANDLE Controller,
+ IN PCI_IO_DEVICE *RootBridge
+ );
+
#endif
--
2.21.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#54065): https://edk2.groups.io/g/devel/message/54065
Mute This Topic: https://groups.io/mt/71063074/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list