[edk2-devel] [PATCH] MdePkg: Add PCI Express 5.0 Header File
Felix Polyudov
felixp at ami.com
Fri Feb 7 20:57:34 UTC 2020
Yes, we did build tests on Windows/VS and Linux/GCC.
-----Original Message-----
From: Gao, Liming [mailto:liming.gao at intel.com]
Sent: Friday, February 07, 2020 12:10 AM
To: Felix Polyudov; devel at edk2.groups.io
Cc: Kinney, Michael D; Manickavasakam Karpagavinayagam
Subject: RE: [PATCH] MdePkg: Add PCI Express 5.0 Header File
Felix:
The patch is good. Is any test for the header file, such as build?
Thanks
Liming
> -----Original Message-----
> From: Felix Polyudov <felixp at ami.com>
> Sent: Wednesday, February 5, 2020 5:30 AM
> To: devel at edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Gao, Liming <liming.gao at intel.com>; manickavasakamk at ami.com
> Subject: [PATCH] MdePkg: Add PCI Express 5.0 Header File
>
> The header includes Physical Layer PCI Express Extended Capability
> definitions based on section 7.7.6 of PCI Express Base Specification 5.0.
>
> Signed-off-by: Felix Polyudov <felixp at ami.com>
> ---
> MdePkg/Include/IndustryStandard/PciExpress50.h | 136 +++++++++++++++++++++++++
> 1 file changed, 136 insertions(+)
> create mode 100644 MdePkg/Include/IndustryStandard/PciExpress50.h
>
> diff --git a/MdePkg/Include/IndustryStandard/PciExpress50.h b/MdePkg/Include/IndustryStandard/PciExpress50.h
> new file mode 100644
> index 0000000..26eae0b
> --- /dev/null
> +++ b/MdePkg/Include/IndustryStandard/PciExpress50.h
> @@ -0,0 +1,136 @@
> +/** @file
> +Support for the PCI Express 5.0 standard.
> +
> +This header file may not define all structures. Please extend as required.
> +
> +Copyright (c) 2020, American Megatrends International LLC. All rights reserved.<BR>
> +SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#ifndef _PCIEXPRESS50_H_
> +#define _PCIEXPRESS50_H_
> +
> +#include <IndustryStandard/PciExpress40.h>
> +
> +#pragma pack(1)
> +
> +/// The Physical Layer PCI Express Extended Capability definitions.
> +///
> +/// Based on section 7.7.6 of PCI Express Base Specification 5.0.
> +///@{
> +#define PCI_EXPRESS_EXTENDED_CAPABILITY_PHYSICAL_LAYER_32_0_ID 0x002A
> +#define PCI_EXPRESS_EXTENDED_CAPABILITY_PHYSICAL_LAYER_32_0_VER1 0x1
> +
> +// Register offsets from Physical Layer PCI-E Ext Cap Header
> +#define PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_CAPABILITIES_OFFSET 0x04
> +#define PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_CONTROL_OFFSET 0x08
> +#define PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_STATUS_OFFSET 0x0C
> +#define PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_RCVD_MODIFIED_TS_DATA1_OFFSET 0x10
> +#define PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_RCVD_MODIFIED_TS_DATA2_OFFSET 0x14
> +#define PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_TRANS_MODIFIED_TS_DATA1_OFFSET 0x18
> +#define PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_TRANS_MODIFIED_TS_DATA2_OFFSET 0x1C
> +#define PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_LANE_EQUALIZATION_CONTROL_OFFSET 0x20
> +
> +typedef union {
> + struct {
> + UINT32 EqualizationByPassToHighestRateSupport : 1; // bit 0
> + UINT32 NoEqualizationNeededSupport : 1; // bit 1
> + UINT32 Reserved1 : 6; // Reserved bit 2:7
> + UINT32 ModifiedTSUsageMode0Support : 1; // bit 8
> + UINT32 ModifiedTSUsageMode1Support : 1; // bit 9
> + UINT32 ModifiedTSUsageMode2Support : 1; // bit 10
> + UINT32 ModifiedTSReservedUsageModes : 5; // bit 11:15
> + UINT32 Reserved2 : 16; // Reserved bit 16:31
> + } Bits;
> + UINT32 Uint32;
> +} PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_CAPABILITIES;
> +
> +typedef union {
> + struct {
> + UINT32 EqualizationByPassToHighestRateDisable : 1; // bit 0
> + UINT32 NoEqualizationNeededDisable : 1; // bit 1
> + UINT32 Reserved1 : 6; // Reserved bit 2:7
> + UINT32 ModifiedTSUsageModeSelected : 3; // bit 8:10
> + UINT32 Reserved2 : 21; // Reserved bit 11:31
> + } Bits;
> + UINT32 Uint32;
> +} PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_CONTROL;
> +
> +typedef union {
> + struct {
> + UINT32 EqualizationComplete : 1; // bit 0
> + UINT32 EqualizationPhase1Success : 1; // bit 1
> + UINT32 EqualizationPhase2Success : 1; // bit 2
> + UINT32 EqualizationPhase3Success : 1; // bit 3
> + UINT32 LinkEqualizationRequest : 1; // bit 4
> + UINT32 ModifiedTSRcvd : 1; // bit 5
> + UINT32 RcvdEnhancedLinkControl : 2; // bit 6:7
> + UINT32 TransmitterPrecodingOn : 1; // bit 8
> + UINT32 TransmitterPrecodeRequest : 1; // bit 9
> + UINT32 NoEqualizationNeededRcvd : 1; // bit 10
> + UINT32 Reserved : 21; // Reserved bit 11:31
> + } Bits;
> + UINT32 Uint32;
> +} PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_STATUS;
> +
> +typedef union {
> + struct {
> + UINT32 RcvdModifiedTSUsageMode : 3; // bit 0:2
> + UINT32 RcvdModifiedTSUsageInfo1 : 13; // bit 3:15
> + UINT32 RcvdModifiedTSVendorId : 16; // bit 16:31
> + } Bits;
> + UINT32 Uint32;
> +} PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_RCVD_MODIFIED_TS_DATA1;
> +
> +typedef union {
> + struct {
> + UINT32 RcvdModifiedTSUsageInfo2 : 24; // bit 0:23
> + UINT32 AltProtocolNegotiationStatus : 2; // bit 24:25
> + UINT32 Reserved : 6; // Reserved bit 26:31
> + } Bits;
> + UINT32 Uint32;
> +} PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_RCVD_MODIFIED_TS_DATA2;
> +
> +typedef union {
> + struct {
> + UINT32 TransModifiedTSUsageMode : 3; // bit 0:2
> + UINT32 TransModifiedTSUsageInfo1 : 13; // bit 3:15
> + UINT32 TransModifiedTSVendorId : 16; // bit 16:31
> + } Bits;
> + UINT32 Uint32;
> +} PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_TRANS_MODIFIED_TS_DATA1;
> +
> +typedef union {
> + struct {
> + UINT32 TransModifiedTSUsageInfo2 : 24; // bit 0:23
> + UINT32 AltProtocolNegotiationStatus : 2; // bit 24:25
> + UINT32 Reserved : 6; // Reserved bit 26:31
> + } Bits;
> + UINT32 Uint32;
> +} PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_TRANS_MODIFIED_TS_DATA2;
> +
> +typedef union {
> + struct {
> + UINT8 DownstreamPortTransmitterPreset : 4; //bit 0..3
> + UINT8 UpstreamPortTransmitterPreset : 4; //bit 4..7
> + } Bits;
> + UINT8 Uint8;
> +} PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_LANE_EQUALIZATION_CONTROL;
> +
> +typedef struct {
> + PCI_EXPRESS_EXTENDED_CAPABILITIES_HEADER Header;
> + PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_CAPABILITIES Capablities;
> + PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_CONTROL Control;
> + PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_STATUS Status;
> + PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_RCVD_MODIFIED_TS_DATA1 RcvdModifiedTs1Data;
> + PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_RCVD_MODIFIED_TS_DATA2 RcvdModifiedTs2Data;
> + PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_TRANS_MODIFIED_TS_DATA1 TransModifiedTs1Data;
> + PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_TRANS_MODIFIED_TS_DATA2 TransModifiedTs2Data;
> + PCI_EXPRESS_REG_PHYSICAL_LAYER_32_0_LANE_EQUALIZATION_CONTROL LaneEqualizationControl[1];
> +} PCI_EXPRESS_EXTENDED_CAPABILITIES_PHYSICAL_LAYER_32_0;
> +///@}
> +
> +#pragma pack()
> +
> +#endif
> --
> 2.10.0.windows.1
>
>
> Please consider the environment before printing this email.
>
> The information contained in this message may be confidential and proprietary to American Megatrends (AMI). This communication is
> intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the
> intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. Please promptly notify the
> sender by reply e-mail or by telephone at 770-246-8600, and then delete or destroy all copies of the transmission.
Please consider the environment before printing this email.
The information contained in this message may be confidential and proprietary to American Megatrends (AMI). This communication is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. Please promptly notify the sender by reply e-mail or by telephone at 770-246-8600, and then delete or destroy all copies of the transmission.
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#54089): https://edk2.groups.io/g/devel/message/54089
Mute This Topic: https://groups.io/mt/70983143/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list