[edk2-devel] [PATCH v2 0/3] Ovmf: enable TPM 1.2

[Yao, Jiewen]

For tpm/vtpm (uninitialized), I think you can set PcdTpmInitializationPolicy to 0 in the TPM detection module. As such, the TCG PEI will skip Startup() command.
Please refer to SecurityPkg\Tcg\Tcg2Config\TpmDetection.c.

I am not clear about the passthrough mode.
Which module initializes the TPM ? Can we let this module pass some information ?

Thank you
Yao Jiewen

> -----Original Message-----
> From: Marc-André Lureau <marcandre.lureau at redhat.com>
> Sent: Saturday, February 15, 2020 7:34 PM
> To: edk2-devel-groups-io <devel at edk2.groups.io>; Yao, Jiewen
> <jiewen.yao at intel.com>
> Cc: edk2-devel at lists.01.org; stefanb at linux.ibm.com; lersek at redhat.com;
> simon.hardy at itdev.co.uk
> Subject: Re: [edk2-devel] [PATCH v2 0/3] Ovmf: enable TPM 1.2
> 
> Hi Yao
> 
> On Thu, Feb 13, 2020 at 2:51 PM Yao, Jiewen <jiewen.yao at intel.com> wrote:
> >
> > Hi Lureau
> > I don’t think we should expose the TPM Interface type via TpmCommandLib.
> >
> > That is the TPM device implementation. The TPM device might use
> TIS/FIFO/CRB, but there might be also other type such as I2C, or fTPM
> implementation type.
> >
> > To distinguish TPM2.0 or TPM1.2, the standard way is to send startup
> command.
> 
> Thanks for the feedback, unfortunately I don't know how to achieve
> this for both tpm/vtpm (uninitialized) & passthrough (initialized).
> 
> If the device is uninitialized, sending Tpm12Startup (TPM_ST_CLEAR) to
> detect 1.2 in Tcg2ConfigPeimEntryPoint will work, but then
> Tpm12Startup () in TcgPei:PeimEntryMA will later fail.
> 
> If the device is initialized/passthrough, sending Tpm12Startup
> (TPM_ST_CLEAR) will fail, so it could send Tpm12Startup (TPM_ST_STATE)
> instead. But that will fail to detect uninitialized 1.2 device.
> 
> I am stuck, any help welcome!
> 
> thanks
> 
> >
> > Thank you
> > Yao Jiewen
> >
> >
> > > -----Original Message-----
> > > From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of
> > > marcandre.lureau at redhat.com
> > > Sent: Thursday, February 13, 2020 9:12 PM
> > > To: edk2-devel at lists.01.org; devel at edk2.groups.io
> > > Cc: stefanb at linux.ibm.com; lersek at redhat.com; simon.hardy at itdev.co.uk;
> > > Marc-André Lureau <marcandre.lureau at redhat.com>
> > > Subject: [edk2-devel] [PATCH v2 0/3] Ovmf: enable TPM 1.2
> > >
> > > From: Marc-André Lureau <marcandre.lureau at redhat.com>
> > >
> > > Hi,
> > >
> > > The following patches add basic TPM 1.2 support for Ovmf/QEMU.
> > >
> > > I tested successfully Win10 with TIS/TPM 1.2 & CRB/TPM 2.0
> > > passthrough, and emulated CRB/TPM 2.0.
> > > (fwiw, I haven't tried to enable TPM_CONFIG_ENABLE)
> > >
> > > Marc-André Lureau (3):
> > >   Ovmf: rename TPM2 config prefix to TPM
> > >   SecurityPkg: export Tpm12GetPtpInterfaceType()
> > >   Ovmf: enable TPM 1.2 support
> > >
> > >  OvmfPkg/OvmfPkgIa32.dsc                       | 39 +++++++++++++------
> > >  OvmfPkg/OvmfPkgIa32.fdf                       | 10 +++--
> > >  OvmfPkg/OvmfPkgIa32X64.dsc                    | 39 +++++++++++++------
> > >  OvmfPkg/OvmfPkgIa32X64.fdf                    | 10 +++--
> > >  OvmfPkg/OvmfPkgX64.dsc                        | 39 +++++++++++++------
> > >  OvmfPkg/OvmfPkgX64.fdf                        | 10 +++--
> > >  OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf      |  3 ++
> > >  OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPeim.c       | 17 +++++++-
> > >  SecurityPkg/Include/Library/Tpm12DeviceLib.h  | 13 +++++++
> > >  .../Library/Tpm12DeviceLibDTpm/Tpm12Tis.c     | 17 ++++----
> > >  10 files changed, 141 insertions(+), 56 deletions(-)
> > >
> > > --
> > > 2.25.0.rc2.1.g09a9a1a997
> > >
> > >
> > >
> >
> >
> > 
> >


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#54500): https://edk2.groups.io/g/devel/message/54500
Mute This Topic: https://groups.io/mt/71240877/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-