[edk2-devel] [PATCH 1/1] ShellPkg: Add support for input with separately reported modifiers

Gao, Zhichao zhichao.gao at intel.com
Wed Feb 19 06:55:15 UTC 2020


Hi Vitaly,

See the comment below:

> -----Original Message-----
> From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Vitaly
> Cheptsov via Groups.Io
> Sent: Monday, February 10, 2020 6:18 PM
> To: devel at edk2.groups.io
> Subject: [edk2-devel] [PATCH 1/1] ShellPkg: Add support for input with
> separately reported modifiers
> 
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2510
> 
> Some firmwares:
> - Report Shift modifier even when they report upper-case unicode letter.
> - Report Ctrl modifier with "shifted" UniChar (i.e. X - 'A' + 1).
> 
> This change provides support for these firmwares preserving the compatibility
> with the previous input handling.
> 
> Signed-off-by: Michael Belyaev <usrsse2 at icloud.com>
> Reviewed-by: Vitaly Cheptsov <vit9696 at protonmail.com>
> ---
>  ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/MainTextEditor.c   | 37
> ++++++++++++++------
>  ShellPkg/Library/UefiShellDebug1CommandsLib/EditInputBar.c          | 28
> ++++++++++-----
>  ShellPkg/Library/UefiShellDebug1CommandsLib/EditMenuBar.c           |  6 ++++
>  ShellPkg/Library/UefiShellDebug1CommandsLib/HexEdit/MainHexEditor.c | 11
> +++---
>  4 files changed, 58 insertions(+), 24 deletions(-)
> 
> diff --git
> a/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/MainTextEditor.c
> b/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/MainTextEditor.c
> index df530f1119..9615a4dfbd 100644
> --- a/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/MainTextEditor.c
> +++ b/ShellPkg/Library/UefiShellDebug1CommandsLib/Edit/MainTextEditor.c
> @@ -1381,8 +1381,8 @@ MainCommandDisplayHelp (
>        continue;
>      }
> 
> -    if (((KeyData.KeyState.KeyShiftState & EFI_SHIFT_STATE_VALID) == 0) ||
> -        (KeyData.KeyState.KeyShiftState == EFI_SHIFT_STATE_VALID)) {
> +    if (((KeyData.KeyState.KeyShiftState & EFI_SHIFT_STATE_VALID) == 0)
> +      || (KeyData.KeyState.KeyShiftState == EFI_SHIFT_STATE_VALID)) {
>        //
>        // For consoles that don't support/report shift state,
>        // CTRL+W is translated to L'W' - L'A' + 1.
> @@ -1390,14 +1390,17 @@ MainCommandDisplayHelp (
>        if (KeyData.Key.UnicodeChar == L'W' - L'A' + 1) {
>          break;
>        }
> -    } else if (((KeyData.KeyState.KeyShiftState & EFI_SHIFT_STATE_VALID) != 0)
> &&
> -               ((KeyData.KeyState.KeyShiftState & (EFI_LEFT_CONTROL_PRESSED |
> EFI_RIGHT_CONTROL_PRESSED)) != 0) &&
> -               ((KeyData.KeyState.KeyShiftState & ~(EFI_SHIFT_STATE_VALID |
> EFI_LEFT_CONTROL_PRESSED | EFI_RIGHT_CONTROL_PRESSED)) == 0)) {
> +    } else if (((KeyData.KeyState.KeyShiftState & EFI_SHIFT_STATE_VALID) != 0)
> +            && ((KeyData.KeyState.KeyShiftState & (EFI_LEFT_CONTROL_PRESSED |
> EFI_RIGHT_CONTROL_PRESSED)) != 0)
> +            && ((KeyData.KeyState.KeyShiftState &
> + ~(EFI_SHIFT_STATE_VALID | EFI_LEFT_CONTROL_PRESSED |
> + EFI_RIGHT_CONTROL_PRESSED)) == 0)) {
>        //
>        // For consoles that supports/reports shift state,
>        // make sure that only CONTROL shift key is pressed.
> +      // For some consoles that report shift state,
> +      // CTRL+W is still translated to L'W' - L'A' + 1.
>        //
> -      if ((KeyData.Key.UnicodeChar == 'w') || (KeyData.Key.UnicodeChar == 'W'))
> {
> +      if ((KeyData.Key.UnicodeChar == L'w') || (KeyData.Key.UnicodeChar == L'W')
> +        || (KeyData.Key.UnicodeChar == L'w' - L'a' + 1) ||
> + (KeyData.Key.UnicodeChar == L'W' - L'A' + 1)) {
>          break;
>        }
>      }
> @@ -1834,7 +1837,8 @@ MainEditorKeyInput (
>    EFI_KEY_DATA              KeyData;
>    EFI_STATUS                Status;
>    EFI_SIMPLE_POINTER_STATE  MouseState;
> -  BOOLEAN                   NoShiftState;
> +  BOOLEAN                   NoModifierState;
> +  BOOLEAN                   ShiftOnlyState;
> 
>    do {
> 
> @@ -1886,17 +1890,28 @@ MainEditorKeyInput (
>          //
>          StatusBarSetRefresh();
>          //
> -        // NoShiftState: TRUE when no shift key is pressed.
> +        // NoModifierState: TRUE when no modifier key is pressed.
>          //
> -        NoShiftState = ((KeyData.KeyState.KeyShiftState &
> EFI_SHIFT_STATE_VALID) == 0) || (KeyData.KeyState.KeyShiftState ==
> EFI_SHIFT_STATE_VALID);
> +        NoModifierState = ((KeyData.KeyState.KeyShiftState &
> EFI_SHIFT_STATE_VALID) == 0)
> +                        || (KeyData.KeyState.KeyShiftState == EFI_SHIFT_STATE_VALID);
> +        //
> +        // ShiftOnlyState: TRUE when no modifier key except Shift is pressed.
> +        //
> +        ShiftOnlyState = ((KeyData.KeyState.KeyShiftState &
> EFI_SHIFT_STATE_VALID) == 0)
> +                        || ((KeyData.KeyState.KeyShiftState
> +                          & ~(EFI_SHIFT_STATE_VALID |
> + EFI_LEFT_SHIFT_PRESSED | EFI_RIGHT_SHIFT_PRESSED)) == 0);
>          //
>          // dispatch to different components' key handling function
>          //
>          if (EFI_NOT_FOUND != MenuBarDispatchControlHotKey(&KeyData)) {
>            Status = EFI_SUCCESS;
> -        } else if (NoShiftState && ((KeyData.Key.ScanCode == SCAN_NULL) ||
> ((KeyData.Key.ScanCode >= SCAN_UP) && (KeyData.Key.ScanCode <=
> SCAN_PAGE_DOWN)))) {
> +        } else if ((ShiftOnlyState && (KeyData.Key.ScanCode == SCAN_NULL))
> +                || (NoModifierState && (KeyData.Key.ScanCode >= SCAN_UP) &&
> (KeyData.Key.ScanCode <= SCAN_PAGE_DOWN))) {
> +          //
> +          // alphanumeric keys with or without shift, or arrow keys without shift
> +          //

This is unmatched with the comments. It only handles the alphanumeric keys with shift.

Thanks,
Zhichao

>            Status = FileBufferHandleInput (&KeyData.Key);
> -        } else if (NoShiftState && (KeyData.Key.ScanCode >= SCAN_F1) &&
> (KeyData.Key.ScanCode <= SCAN_F12)) {
> +        } else if (NoModifierState && (KeyData.Key.ScanCode >= SCAN_F1)
> + && (KeyData.Key.ScanCode <= SCAN_F12)) {
>            Status = MenuBarDispatchFunctionKey (&KeyData.Key);
>          } else {
>            StatusBarSetStatusString (L"Unknown Command"); diff --git
> a/ShellPkg/Library/UefiShellDebug1CommandsLib/EditInputBar.c
> b/ShellPkg/Library/UefiShellDebug1CommandsLib/EditInputBar.c
> index 35b0b701e8..d053059220 100644
> --- a/ShellPkg/Library/UefiShellDebug1CommandsLib/EditInputBar.c
> +++ b/ShellPkg/Library/UefiShellDebug1CommandsLib/EditInputBar.c
> @@ -130,6 +130,8 @@ InputBarRefresh (
>    UINTN                   EventIndex;
>    UINTN                   CursorRow;
>    UINTN                   CursorCol;
> +  BOOLEAN                 ShiftPressed;
> +  BOOLEAN                 ModifiersPressed;
> 
>    //
>    // variable initialization
> @@ -180,17 +182,23 @@ InputBarRefresh (
>      if (EFI_ERROR (Status)) {
>        continue;
>      }
> -    if (((KeyData.KeyState.KeyShiftState & EFI_SHIFT_STATE_VALID) != 0) &&
> -        (KeyData.KeyState.KeyShiftState != EFI_SHIFT_STATE_VALID)) {
> -      //
> -      // Shift key pressed.
> -      //
> +    ModifiersPressed = ((KeyData.KeyState.KeyShiftState &
> EFI_SHIFT_STATE_VALID) != 0)
> +                    && (KeyData.KeyState.KeyShiftState !=
> + EFI_SHIFT_STATE_VALID);
> +
> +    //
> +    // TRUE if Shift is pressed and no other modifiers are pressed
> +    //
> +    ShiftPressed = ModifiersPressed &&
> +                   ((KeyData.KeyState.KeyShiftState &
> +                     ~(EFI_SHIFT_STATE_VALID | EFI_LEFT_SHIFT_PRESSED |
> + EFI_RIGHT_SHIFT_PRESSED)) == 0);
> +
> +    if (ModifiersPressed && !ShiftPressed) {
>        continue;
>      }
>      //
>      // pressed ESC
>      //
> -    if (KeyData.Key.ScanCode == SCAN_ESC) {
> +    if (!ModifiersPressed && KeyData.Key.ScanCode == SCAN_ESC) {
>        Size    = 0;
>        Status  = EFI_NOT_READY;
>        break;
> @@ -198,9 +206,10 @@ InputBarRefresh (
>      //
>      // return pressed
>      //
> -    if (KeyData.Key.UnicodeChar == CHAR_LINEFEED ||
> KeyData.Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> +    if (!ModifiersPressed
> +      && (KeyData.Key.UnicodeChar == CHAR_LINEFEED ||
> + KeyData.Key.UnicodeChar == CHAR_CARRIAGE_RETURN)) {
>        break;
> -    } else if (KeyData.Key.UnicodeChar == CHAR_BACKSPACE) {
> +    } else if (!ModifiersPressed && KeyData.Key.UnicodeChar ==
> + CHAR_BACKSPACE) {
>        //
>        // backspace
>        //
> @@ -213,7 +222,8 @@ InputBarRefresh (
> 
>          }
>        }
> -    } else if (KeyData.Key.UnicodeChar <= 127 && KeyData.Key.UnicodeChar >=
> 32) {
> +    } else if ((!ModifiersPressed || ShiftPressed)
> +            && KeyData.Key.UnicodeChar <= 127 &&
> + KeyData.Key.UnicodeChar >= 32) {
>        //
>        // VALID ASCII char pressed
>        //
> diff --git a/ShellPkg/Library/UefiShellDebug1CommandsLib/EditMenuBar.c
> b/ShellPkg/Library/UefiShellDebug1CommandsLib/EditMenuBar.c
> index ca8bc506d9..eabbf3c571 100644
> --- a/ShellPkg/Library/UefiShellDebug1CommandsLib/EditMenuBar.c
> +++ b/ShellPkg/Library/UefiShellDebug1CommandsLib/EditMenuBar.c
> @@ -190,11 +190,17 @@ MenuBarDispatchControlHotKey (
>      //
>      // For consoles that supports/reports shift state,
>      // make sure only CONTROL is pressed.
> +    // For some consoles that report shift state,
> +    // Ctrl+A is still translated to 1 (UnicodeChar).
>      //
>      if ((KeyData->Key.UnicodeChar >= L'A') && (KeyData->Key.UnicodeChar <=
> L'Z')) {
>        ControlIndex = KeyData->Key.UnicodeChar - L'A' + 1;
>      } else if ((KeyData->Key.UnicodeChar >= L'a') && (KeyData->Key.UnicodeChar
> <= L'z')) {
>        ControlIndex = KeyData->Key.UnicodeChar - L'a' + 1;
> +    } else if ((KeyData->Key.UnicodeChar >= L'A' - L'A' + 1) && (KeyData-
> >Key.UnicodeChar <= L'Z' - L'A' + 1)) {
> +      ControlIndex = KeyData->Key.UnicodeChar;
> +    } else if ((KeyData->Key.UnicodeChar >= L'a' - L'a' + 1) && (KeyData-
> >Key.UnicodeChar <= L'z' - L'z' + 1)) {
> +      ControlIndex = KeyData->Key.UnicodeChar;
>      }
>    }
>    if ((SCAN_CONTROL_Z < ControlIndex)
> diff --git
> a/ShellPkg/Library/UefiShellDebug1CommandsLib/HexEdit/MainHexEditor.c
> b/ShellPkg/Library/UefiShellDebug1CommandsLib/HexEdit/MainHexEditor.c
> index a00df49d38..394e531c16 100644
> --- a/ShellPkg/Library/UefiShellDebug1CommandsLib/HexEdit/MainHexEditor.c
> +++ b/ShellPkg/Library/UefiShellDebug1CommandsLib/HexEdit/MainHexEditor.
> +++ c
> @@ -137,14 +137,17 @@ HMainCommandDisplayHelp (
>        if (KeyData.Key.UnicodeChar == L'W' - L'A' + 1) {
>          break;
>        }
> -    } else if (((KeyData.KeyState.KeyShiftState & EFI_SHIFT_STATE_VALID) != 0)
> &&
> -               ((KeyData.KeyState.KeyShiftState & (EFI_LEFT_CONTROL_PRESSED |
> EFI_RIGHT_CONTROL_PRESSED)) != 0) &&
> -               ((KeyData.KeyState.KeyShiftState & ~(EFI_SHIFT_STATE_VALID |
> EFI_LEFT_CONTROL_PRESSED | EFI_RIGHT_CONTROL_PRESSED)) == 0)) {
> +    } else if (((KeyData.KeyState.KeyShiftState & EFI_SHIFT_STATE_VALID) != 0)
> +            && ((KeyData.KeyState.KeyShiftState & (EFI_LEFT_CONTROL_PRESSED |
> EFI_RIGHT_CONTROL_PRESSED)) != 0)
> +            && ((KeyData.KeyState.KeyShiftState &
> + ~(EFI_SHIFT_STATE_VALID | EFI_LEFT_CONTROL_PRESSED |
> + EFI_RIGHT_CONTROL_PRESSED)) == 0)) {
>        //
>        // For consoles that supports/reports shift state,
>        // make sure that only CONTROL shift key is pressed.
> +      // For some consoles that report shift state,
> +      // CTRL+W is still translated to L'W' - L'A' + 1.
>        //
> -      if ((KeyData.Key.UnicodeChar == 'w') || (KeyData.Key.UnicodeChar == 'W'))
> {
> +      if ((KeyData.Key.UnicodeChar == 'w') || (KeyData.Key.UnicodeChar == 'W')
> +        || (KeyData.Key.UnicodeChar == L'w' - L'a' + 1) ||
> + (KeyData.Key.UnicodeChar == L'W' - L'A' + 1)) {
>          break;
>        }
>      }
> --
> 2.21.1 (Apple Git-122.3)
> 
> 
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> 
> View/Reply Online (#54122): https://edk2.groups.io/g/devel/message/54122
> Mute This Topic: https://groups.io/mt/71133729/1768756
> Group Owner: devel+owner at edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub  [zhichao.gao at intel.com]
> -=-=-=-=-=-=


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#54608): https://edk2.groups.io/g/devel/message/54608
Mute This Topic: https://groups.io/mt/71133729/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-





More information about the edk2-devel-archive mailing list