[edk2-devel] [PATCH 2/5] BaseTools: Generate multiple rules when multiple output files

[PierreGondois]

From: Pierre Gondois <pierre.gondois at arm.com>

This patch modifies the Makefile generation not to stop
adding Makfile rules when the first final target is found.
E.g.:
If the following rules are described in build_rule.txt:
 -[Rule1]: .X files generate .Y and .Z files;
 -[Rule2]: .Z files generate .Z1 files.
Currently, if a File1.X file was part of the sources of a
module, only [Rule1] would be generated in the Makefile.
Indeed, there are no rules to apply to .Y files: .Y files
are a final target. However, there is still [Rule2] to
apply to .Z files.

This patch also adds a dependency between the first
ouput file of a rule and the other output files.
For instance, with the same example as above, File1.Y
and File1.Z are generated by the following rule:
File1.Y: File1.X
    <Generate File1.Y>
    <Generate File1.Z>

and the new dependency is:
File1.Z: File1.Y

This is necessary to keep a dependency order during the
execution of the Makefile. Indeed, .Y and .Z files are
generated by the execution of a common set of commands,
and without this rule, there is no explicit dependency
relation between them.

Signed-off-by: Pierre Gondois <Pierre.Gondois at arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar at arm.com>
---

The changes can be seen at: https://github.com/PierreARM/edk2/commits/803_Compile_AML_bytecode_array_into_OBJ_file_v5

Notes:
    v1:
     - Generate multiple rules when multiple output files
       are specified in the build_rule.txt file. [Pierre]
    v2:
     - Use the "FileType" variable in the _ApplyBuildRule
       function as it is in the current state. [Pierre]
    v3:
     - Adding Suggested-by [Pierre]
    v4:
    - No modification. Re-sending the patch with base64
      encoding to conserve the right line endings. [Bob]
    v5:
     - No modification. [Pierre]

 BaseTools/Source/Python/AutoGen/GenMake.py       |  6 ++++
 BaseTools/Source/Python/AutoGen/ModuleAutoGen.py | 38 +++++++++++---------
 2 files changed, 27 insertions(+), 17 deletions(-)

diff --git a/BaseTools/Source/Python/AutoGen/GenMake.py b/BaseTools/Source/Python/AutoGen/GenMake.py
index bbb3c29446f53fa7f2cb61a216a5b119f72c3fbc..0314d0ea34d99a014379e8d30c46ac0f0a7068ce 100755
--- a/BaseTools/Source/Python/AutoGen/GenMake.py
+++ b/BaseTools/Source/Python/AutoGen/GenMake.py
@@ -1054,6 +1054,12 @@ cleanlib:
                     TargetDict = {"target": self.PlaceMacro(T.Target.Path, self.Macros), "cmd": "\n\t".join(T.Commands),"deps": Deps}
                     self.BuildTargetList.append(self._BUILD_TARGET_TEMPLATE.Replace(TargetDict))
 
+                    # Add a Makefile rule for targets generating multiple files.
+                    # The main output is a prerequisite for the other output files.
+                    for i in T.Outputs[1:]:
+                        AnnexeTargetDict = {"target": self.PlaceMacro(i.Path, self.Macros), "cmd": "", "deps": self.PlaceMacro(T.Target.Path, self.Macros)}
+                        self.BuildTargetList.append(self._BUILD_TARGET_TEMPLATE.Replace(AnnexeTargetDict))
+
     def ParserCCodeFile(self, T, Type, CmdSumDict, CmdTargetDict, CmdCppDict, DependencyDict):
         if not CmdSumDict:
             for item in self._AutoGenObject.Targets[Type]:
diff --git a/BaseTools/Source/Python/AutoGen/ModuleAutoGen.py b/BaseTools/Source/Python/AutoGen/ModuleAutoGen.py
index aad591de65f086043d55aeea5661f59c53792e7c..dc8b1fe3d160cac2da22227fc233e3aa0d92cb1e 100755
--- a/BaseTools/Source/Python/AutoGen/ModuleAutoGen.py
+++ b/BaseTools/Source/Python/AutoGen/ModuleAutoGen.py
@@ -860,7 +860,8 @@ class ModuleAutoGen(AutoGen):
         SubDirectory = os.path.join(self.OutputDir, File.SubDir)
         if not os.path.exists(SubDirectory):
             CreateDirectory(SubDirectory)
-        LastTarget = None
+        TargetList = set()
+        FinalTargetName = set()
         RuleChain = set()
         SourceList = [File]
         Index = 0
@@ -870,6 +871,9 @@ class ModuleAutoGen(AutoGen):
         self.BuildOption
 
         while Index < len(SourceList):
+            # Reset the FileType if not the first iteration.
+            if Index > 0:
+                FileType = TAB_UNKNOWN_FILE
             Source = SourceList[Index]
             Index = Index + 1
 
@@ -886,29 +890,25 @@ class ModuleAutoGen(AutoGen):
             elif Source.Ext in self.BuildRules:
                 RuleObject = self.BuildRules[Source.Ext]
             else:
-                # stop at no more rules
-                if LastTarget:
-                    self._FinalBuildTargetList.add(LastTarget)
-                break
+                # No more rule to apply: Source is a final target.
+                FinalTargetName.add(Source)
+                continue
 
             FileType = RuleObject.SourceFileType
             self._FileTypes[FileType].add(Source)
 
             # stop at STATIC_LIBRARY for library
             if self.IsLibrary and FileType == TAB_STATIC_LIBRARY:
-                if LastTarget:
-                    self._FinalBuildTargetList.add(LastTarget)
-                break
+                FinalTargetName.add(Source)
+                continue
 
             Target = RuleObject.Apply(Source, self.BuildRuleOrder)
             if not Target:
-                if LastTarget:
-                    self._FinalBuildTargetList.add(LastTarget)
-                break
-            elif not Target.Outputs:
-                # Only do build for target with outputs
-                self._FinalBuildTargetList.add(Target)
+                # No Target: Source is a final target.
+                FinalTargetName.add(Source)
+                continue
 
+            TargetList.add(Target)
             self._BuildTargets[FileType].add(Target)
 
             if not Source.IsBinary and Source == File:
@@ -916,12 +916,16 @@ class ModuleAutoGen(AutoGen):
 
             # to avoid cyclic rule
             if FileType in RuleChain:
-                break
+                EdkLogger.error("build", ERROR_STATEMENT, "Cyclic dependency detected while generating rule for %s" % str(Source))
 
             RuleChain.add(FileType)
             SourceList.extend(Target.Outputs)
-            LastTarget = Target
-            FileType = TAB_UNKNOWN_FILE
+
+        # For each final target name, retrieve the corresponding TargetDescBlock instance.
+        for FTargetName in FinalTargetName:
+            for Target in TargetList:
+                if FTargetName == Target.Target:
+                    self._FinalBuildTargetList.add(Target)
 
     @cached_property
     def Targets(self):
-- 
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'