[edk2-devel] [PATCH v13 45/46] UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
Lendacky, Thomas
thomas.lendacky at amd.com
Fri Jul 31 13:36:21 UTC 2020
On 7/31/20 7:43 AM, Laszlo Ersek wrote:
> Hi Tom,
Hi Laszlo,
>
> On 07/30/20 20:43, Tom Lendacky wrote:
>> From: Tom Lendacky <thomas.lendacky at amd.com>
>>
>> BZ: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzilla.tianocore.org%2Fshow_bug.cgi%3Fid%3D2198&data=02%7C01%7Cthomas.lendacky%40amd.com%7Cb8c77cf296c949d2bbd808d8354f542b%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637317962138028351&sdata=HISHZmLjOc%2FfgVrBm8MlNeDAk453NJ64%2B51bETZj4rk%3D&reserved=0
>>
>> Before UEFI transfers control to the OS, it must park the AP. This is
>> done using the AsmRelocateApLoop function to transition into 32-bit
>> non-paging mode. For an SEV-ES guest, a few additional things must be
>> done:
>> - AsmRelocateApLoop must be updated to support SEV-ES. This means
>> performing a VMGEXIT AP Reset Hold instead of an MWAIT or HLT loop.
>> - Since the AP must transition to real mode, a small routine is copied
>> to the WakeupBuffer area. Since the WakeupBuffer will be used by
>> the AP during OS booting, it must be placed in reserved memory.
>> Additionally, the AP stack must be located where it can be accessed
>> in real mode.
>> - Once the AP is in real mode it will transfer control to the
>> destination specified by the OS in the SEV-ES AP Jump Table. The
>> SEV-ES AP Jump Table address is saved by the hypervisor for the OS
>> using the GHCB VMGEXIT AP Jump Table exit code.
>>
>> Cc: Eric Dong <eric.dong at intel.com>
>> Cc: Ray Ni <ray.ni at intel.com>
>> Cc: Laszlo Ersek <lersek at redhat.com>
>> Reviewed-by: Eric Dong <eric.dong at intel.com>
>> Signed-off-by: Tom Lendacky <thomas.lendacky at amd.com>
>> ---
>> UefiCpuPkg/Library/MpInitLib/MpLib.h | 8 +-
>> UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 54 +++++++-
>> UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 131 ++++++++++++++++--
>> 3 files changed, 175 insertions(+), 18 deletions(-)
>
> Now that this series is almost ready to merge, I've done a bit of
> regression-testing.
>
> Unfortunately, this patch breaks booting with IA32 OVMF.
>
> More precisely, it breaks the IA32 version of DxeMpInitLib.
Yeah, that's not good. I will look into this based on your input below.
What's strange is that my system doesn't hang and successfully boots all
APs (up to 64 is what I've tested with).
But, yes, both call sites should be the same and I will make that change.
>
> The symptom is that just when the OS would be launched, the
> multiprocessor guest hangs. This is how the log terminates:
>
>> FSOpen: Open '\370ac550dcaa48b88f1ca75ad903b0e7\4.16.7-100.fc26.i686\linux'
>> Success
>> [Security] 3rd party image[0] can be loaded after EndOfDxe:
>> PciRoot(0x0)/Pci(0x2,0x1)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,D9F1FBA5-E5D3-440A-B6A7-87B593E4FAB1,0x800,0x100000)/\370ac550dcaa48b88f1ca75ad903b0e7\4.16.7-100.fc26.i686\linux.
>> InstallProtocolInterface: [EfiLoadedImageProtocol] 853A03A8
>> Loading driver at 0x00083E72000 EntryPoint=0x00083E76680
>> InstallProtocolInterface: [EfiLoadedImageDevicePathProtocol] 853A0510
>> ProtectUefiImageCommon - 0x853A03A8
>> - 0x0000000083E72000 - 0x0000000000E75000
>> FSOpen: Open '370ac550dcaa48b88f1ca75ad903b0e7\4.16.7-100.fc26.i686\initrd'
>> Success
>> PixelBlueGreenRedReserved8BitPerColor
>> ConvertPages: range 400000 - 1274FFF covers multiple entries
>> SmmInstallProtocolInterface: [EdkiiSmmExitBootServicesProtocol] 0
>> CpuDxe: 5-Level Paging = 0
>> [HANG]
>
> Meanwhile some guest CPUs are pegged.
>
> Normally, when this series is not applied, the next log entry is (in
> place of [HANG]):
>
>> MpInitChangeApLoopCallback() done!
>
> I've identified this patch by bisection, after applying the series on
> current master (137c2c6eff67, "Revert "BaseTools/PatchCheck.py: Add
> LicenseCheck"", 2020-07-31).
>
> Here's the bisection log:
>
>> git bisect start
>> # good: [137c2c6eff67f4750d77e8e40af6683c412d3ed0] Revert "BaseTools/PatchCheck.py: Add LicenseCheck"
>> git bisect good 137c2c6eff67f4750d77e8e40af6683c412d3ed0
>> # bad: [d3f7971f4f70c9f39170b42af837e58e59435ad3] Maintainers.txt: Add reviewers for the OvmfPkg SEV-related files
>> git bisect bad d3f7971f4f70c9f39170b42af837e58e59435ad3
>> # good: [9551e3fc61ba0c0ddf8e79b425a22aa7dd61cb8b] OvmfPkg/VmgExitLib: Add support for RDTSCP NAE events
>> git bisect good 9551e3fc61ba0c0ddf8e79b425a22aa7dd61cb8b
>> # good: [10acf16b38522d8a1b538b3aa432daaa72c0e97b] OvmfPkg: Reserve a page in memory for the SEV-ES usage
>> git bisect good 10acf16b38522d8a1b538b3aa432daaa72c0e97b
>> # good: [ccb4267e76b6474657c41bef7e76a980930c22ea] UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
>> git bisect good ccb4267e76b6474657c41bef7e76a980930c22ea
>> # good: [94e238ae37505cfb081f3b9b4632067e4a113cf9] OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
>> git bisect good 94e238ae37505cfb081f3b9b4632067e4a113cf9
>> # bad: [16c21b9d10b032d66d4105dd4693fd9dc6e6ec18] UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
>> git bisect bad 16c21b9d10b032d66d4105dd4693fd9dc6e6ec18
>> # good: [49855596e383ab2aa6410fa060e22d4817d8e64e] OvmfPkg: Move the GHCB allocations into reserved memory
>> git bisect good 49855596e383ab2aa6410fa060e22d4817d8e64e
>> # first bad commit: [16c21b9d10b032d66d4105dd4693fd9dc6e6ec18] UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
>
> So clearly we should be looking for an IA32-specific change, or
> IA32-specific *omission*, in this patch, that could cause the problem.
>
> The bug is the following:
>
> On 07/30/20 20:43, Tom Lendacky wrote:
>>
>> diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
>> index b1a9d99cb3eb..267aa5201c50 100644
>> --- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
>> +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
>> @@ -349,8 +350,11 @@ VOID
>> IN BOOLEAN MwaitSupport,
>> IN UINTN ApTargetCState,
>> IN UINTN PmCodeSegment,
>> + IN UINTN Pm16CodeSegment,
>> IN UINTN TopOfApStack,
>> - IN UINTN NumberToFinish
>> + IN UINTN NumberToFinish,
>> + IN UINTN SevEsAPJumpTable,
>> + IN UINTN WakeupBuffer
>> );
>>
>> /**
>
> (1) This hunk modifies the parameter list of functions pointed-to by
> ASM_RELOCATE_AP_LOOP.
>
>> diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
>> index 9115ff9e3e30..7165bcf3124a 100644
>> --- a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
>> +++ b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
>> @@ -330,17 +350,26 @@ RelocateApLoop (
>> BOOLEAN MwaitSupport;
>> ASM_RELOCATE_AP_LOOP AsmRelocateApLoopFunc;
>> UINTN ProcessorNumber;
>> + UINTN StackStart;
>>
>> MpInitLibWhoAmI (&ProcessorNumber);
>> CpuMpData = GetCpuMpData ();
>> MwaitSupport = IsMwaitSupport ();
>> + if (CpuMpData->SevEsIsEnabled) {
>> + StackStart = CpuMpData->SevEsAPResetStackStart;
>> + } else {
>> + StackStart = mReservedTopOfApStack;
>> + }
>> AsmRelocateApLoopFunc = (ASM_RELOCATE_AP_LOOP) (UINTN) mReservedApLoopFunc;
>> AsmRelocateApLoopFunc (
>> MwaitSupport,
>> CpuMpData->ApTargetCState,
>> CpuMpData->PmCodeSegment,
>> - mReservedTopOfApStack - ProcessorNumber * AP_SAFE_STACK_SIZE,
>> - (UINTN) &mNumberToFinish
>> + CpuMpData->Pm16CodeSegment,
>> + StackStart - ProcessorNumber * AP_SAFE_STACK_SIZE,
>> + (UINTN) &mNumberToFinish,
>> + CpuMpData->SevEsAPBuffer,
>> + CpuMpData->WakeupBuffer
>> );
>> //
>> // It should never reach here
>
> (2) This hunk modifies the call site, in accordance with the prototype
> change at (1).
>
>> diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
>> index 6956b408d004..3b8ec477b8b3 100644
>> --- a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
>> +++ b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
>> @@ -465,6 +465,10 @@ BITS 16
>
>> ; - IP for Real Mode (two bytes)
>> ; - CS for Real Mode (two bytes)
>> ;
>> + ; This label is also used with AsmRelocateApLoop. During MP finalization,
>> + ; the code from PM16Mode to SwitchToRealProcEnd is copied to the start of
>> + ; the WakeupBuffer, allowing a parked AP to be booted by an OS.
>> + ;
>> PM16Mode:
>> mov eax, cr0 ; Read CR0
>> btr eax, 0 ; Set PE=0
>> @@ -487,32 +491,95 @@ PM16Mode:
>> SwitchToRealProcEnd:
>>
>> ;-------------------------------------------------------------------------------------
>> -; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish);
>> +; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, Pm16CodeSegment, TopOfApStack, CountTofinish, SevEsAPJumpTable, WakeupBuffer);
>> ;-------------------------------------------------------------------------------------
>> global ASM_PFX(AsmRelocateApLoop)
>> ASM_PFX(AsmRelocateApLoop):
>> AsmRelocateApLoopStart:
>> BITS 64
>
> (3) Unfortunately, the patch only adapts the X64 implementation of the
> AsmRelocateApLoopStart() function to the new prototype; the IA32
> implementation no longer matches the call site.
>
> (I'm not sure if the intent was for the IA32 version to simply ignore
> the new parameters, but even in that case, the "Pm16CodeSegment"
> parameter is inserted in the middle of the parameter list, likely
> offsetting the rest.)
>
> The problem is foreshadowed even by hunk (2). Namely, in hunk (2), the
>
> s/mReservedTopOfApStack/StackStart/
>
> replacement is *more difficult* to verify than necessary -- exactly
> because "CpuMpData->Pm16CodeSegment" is inserted *before* it.
I can do one of two things here and just put the 3 new parameters at the
end of the function call rather than keeping the code segment parameters
together or update the IA32 call site. Let me see which looks best. But
I'll likely update the IA32 call site no matter what with at least
comments about the parameters that aren't used, either way.
Thanks,
Tom
>
> Thanks
> Laszlo
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#63574): https://edk2.groups.io/g/devel/message/63574
Mute This Topic: https://groups.io/mt/75895009/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list