[edk2-devel] [PATCH edk2-platforms v2] Silicon/ChaosKeyDxe: don't rely on connect all controllers

[Ard Biesheuvel]

On 6/3/20 5:47 PM, Andrew Fish wrote:
> 
> 
>> On Jun 2, 2020, at 11:32 PM, Ard Biesheuvel <ard.biesheuvel at arm.com 
>> <mailto:ard.biesheuvel at arm.com>> wrote:
>>
>> On 6/3/20 12:28 AM, Andrew Fish wrote:
>>>> On Jun 2, 2020, at 6:38 AM, Ard Biesheuvel 
>>>> <ard.biesheuvel at linaro.org <mailto:ard.biesheuvel at linaro.org>> wrote:
>>>>
>>>> From: Ard Biesheuvel <ard.biesheuvel at arm.com 
>>>> <mailto:ard.biesheuvel at arm.com>>
>>>>
>>>> The ChaosKey driver implements the UEFI driver model, and so it is
>>>> not guaranteed that any controllers will be attached to this driver
>>>> unless it is connected explicitly. On many platforms today, this is
>>>> taken care of by the ConnectAll() call that occurs in the BDS, but
>>>> this is not something we should rely on.
>>>>
>>>> So add a protocol notification event that will attempt to connect
>>>> the ChaosKey on each USB I/O protocol instance that carries the
>>>> expected vendor and product IDs. This still relies on the USB host
>>>> controllers to be connected by the platform, which is typically the
>>>> case (given that a USB keyboard is required to interrupt the boot)
>>>>
>>>> On platforms where USB is not connected at all by default, it is really
>>>> not up to a third party driver to meddle with this, and so relying on
>>>> the USB host controllers to have been connected non-reursively is the
>>>> best we can do. Note that third party drivers registered via Driver####
>>>> can set a 'reconnect all' flag if needed to mitigate this.
>>>>
>>>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel at arm.com 
>>>> <mailto:ard.biesheuvel at arm.com>>
>>>> ---
>>>>
>>>> Unfortunately, the previous approach of connecting a short-form USB 
>>>> device
>>>> path containing the ChaosKey's VID/PID turned out not to be reliable in
>>>> practice (it doesn't work at all on ThunderX2 with AMI firmware)
>>>>
>>>> So instead, we have to rely on USB I/O protocols having been 
>>>> instantiated
>>>> by the DXE core. This is what typically happens, given that USB 
>>>> keyboards
>>>> are also exposed via USB I/O protocol instances. The only difference 
>>>> with
>>>> a non-fast [ConnectAll()] boot is that those USB I/O protocol instances
>>>> are not connected further automatically, but it is reasonable to expect
>>>> that the handles themselves have been instantiated.
>>>>
>>>> Platforms that do not produce those USB I/O handles would not be able to
>>>> offer the ability to interrupt the boot or enter the menu using a USB
>>>> keyboard, so this is rather rare in practice. Also, if such platforms do
>>>> exist, it is not up to this 3rd party driver to override this policy and
>>>> enumerate the entire USB hierarchy.
>>>>
>>>> So this means we need to call UsbHwrngDriverBindingSupported() directly
>>>> to check whether the USB I/O protocol in question has the right VID/PID.
>>>> If that succeeds, there is really no point in using ConnectController(),
>>>> so just call UsbHwrngDriverBindingStart() directly to connect the driver
>>>> to the controller.
>>>>
>>> Actually there is a point in using gBS->ConnectController().
>>> 1) You make it impossible for the platform to override the drivers 
>>> choice. The philosophy of EFI has alway been that the drivers should 
>>> not cary policy and the platforms should cary policy. This inverts that.
>>> 2) I’m not sure it is well defined behavior by UEFI to NOT call 
>>> gBS->ConnectController(). I took a quick look at the DXE Core and the 
>>> gBS->ConnectController() is not doing any book keeping, other than 
>>> managing the precedence rules, but it seems like it would be legal to 
>>> add something in the future. + Mike in case I’m off on this one.
>>
>> The idea is really that by loading this driver, you are indicating 
>> that you want it to connect to any supporting controller and produce 
>> the RNG protocol, despite the platform policy. The UEFI driver model 
>> simply isn't a great fit here, since the RNG is never a boot target 
>> and you just want it to connect all the time.
>>
> 
> I understand the issue. On the fast boot path only things in the NVRAM 
> variables, or hard coded as BDS policy get connected. For example in our 
> custom BDS we have code that connects devices related to the T2 and we 
> have custom code that only connects them at the known location. These 
> devices produce services that other EFI Driver Model drivers use when 
> they connect.
> 

Sure. If the controller is known to live at a particular location on a 
particular platform, you can just connect it. The idea of this driver is 
that you can install it on any platform, plug in the USB stick and off 
you go, which is substantially more complicated.


>> It is a shame my first approach did not work: it attempted to connect 
>> the short form USB class device path carrying the VID and PID of this 
>> controller as the remaining device path on each detected USB host 
>> controller, similar to how USB keyboards are connected in the upstream 
>> BDS code.
>>
> 
> Is there a BZ for that? I’ve gotten feedback over the years that our BDS 
> implementation is hard to understand. Maybe we should invest some time 
> in documentation on how to use it?
> 

I'm not sure that would help. I was hoping we could rely on spec'ed 
behavior here, rather than how some BDSes might behave.

Note that the AMI BDS behaved differently here than the EDK2 one.


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#60679): https://edk2.groups.io/g/devel/message/60679
Mute This Topic: https://groups.io/mt/74627343/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-