[edk2-devel] [PATCH 2/2] UefiPayloadPkg/Pci: Use the PCIE Base Addr stored in AcpiBoardInfo HOB
Ma, Maurice
maurice.ma at intel.com
Thu Jun 4 12:58:25 UTC 2020
Hi, Ray,
Yes, that addressed my questions. Thank you!
Thanks
Maurice
> -----Original Message-----
> From: Ni, Ray <ray.ni at intel.com>
> Sent: Wednesday, June 3, 2020 20:06
> To: Ma, Maurice <maurice.ma at intel.com>; devel at edk2.groups.io
> Cc: Dong, Guo <guo.dong at intel.com>; You, Benjamin
> <benjamin.you at intel.com>
> Subject: RE: [PATCH 2/2] UefiPayloadPkg/Pci: Use the PCIE Base Addr stored in
> AcpiBoardInfo HOB
>
> Maurice,
> 1. EFIAPI: sure. I will add the missing "EFIAPI".
> 2. ASSERT: Is below code to avoid dereferencing NULL pointer ok to you?
>
> ASSERT (Count != NULL);
> + if (Count == NULL) {
> + return NULL;
> + }
>
> Thanks,
> Ray
>
> > -----Original Message-----
> > From: Ma, Maurice <maurice.ma at intel.com>
> > Sent: Wednesday, June 3, 2020 11:35 PM
> > To: Ni, Ray <ray.ni at intel.com>; devel at edk2.groups.io
> > Cc: Dong, Guo <guo.dong at intel.com>; You, Benjamin
> > <benjamin.you at intel.com>
> > Subject: RE: [PATCH 2/2] UefiPayloadPkg/Pci: Use the PCIE Base Addr
> > stored in AcpiBoardInfo HOB
> >
> > Hi, Ray,
> >
> > Thank you very much for making this change.
> >
> > Two minor comments here,
> > - Should we add "EFIAPI" for function GetPciSegmentInfo() since it is standard
> library interface ?
> > - For ASSERT (Count != NULL), can we have an error handling flow in the
> code to deal with the case ?
> >
> > Thanks
> > Maurice
> >
> > > -----Original Message-----
> > > From: Ni, Ray <ray.ni at intel.com>
> > > Sent: Wednesday, June 3, 2020 3:21
> > > To: devel at edk2.groups.io
> > > Cc: Ma, Maurice <maurice.ma at intel.com>; Dong, Guo
> > > <guo.dong at intel.com>; You, Benjamin <benjamin.you at intel.com>
> > > Subject: [PATCH 2/2] UefiPayloadPkg/Pci: Use the PCIE Base Addr
> > > stored in AcpiBoardInfo HOB
> > >
> > > Today's UefiPayloadPkg always uses 0xE0000000 as the PCIE base
> > > address and ignores the value set in AcpiBoardInfo HOB created by
> > > the boot loader. This makes the payload binary cannot work in
> > > environment where the PCIE base address set by boot loader doesn't equal
> to 0xE0000000.
> > >
> > > The patch enhances UefiPayloadPkg so that the PCIE base address set
> > > by boot loader in the AcpiBoardInfo HOB is used.
> > >
> > > Signed-off-by: Ray Ni <ray.ni at intel.com>
> > > Cc: Maurice Ma <maurice.ma at intel.com>
> > > Cc: Guo Dong <guo.dong at intel.com>
> > > Cc: Benjamin You <benjamin.you at intel.com>
> > > ---
> > > .../PciSegmentInfoLibAcpiBoardInfo.c | 55 +++++++++++++++++++
> > > .../PciSegmentInfoLibAcpiBoardInfo.inf | 36 ++++++++++++
> > > UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 6 +-
> > > 3 files changed, 95 insertions(+), 2 deletions(-) create mode
> > > 100644
> > > UefiPayloadPkg/Library/PciSegmentInfoLibAcpiBoardInfo/PciSegmentInfo
> > > LibAc
> > > piBoardInfo.c
> > > create mode 100644
> > > UefiPayloadPkg/Library/PciSegmentInfoLibAcpiBoardInfo/PciSegmentInfo
> > > LibAc
> > > piBoardInfo.inf
> > >
> > > diff --git
> > > a/UefiPayloadPkg/Library/PciSegmentInfoLibAcpiBoardInfo/PciSegmentIn
> > > foLib
> > > AcpiBoardInfo.c
> > > b/UefiPayloadPkg/Library/PciSegmentInfoLibAcpiBoardInfo/PciSegmentIn
> > > foLib
> > > AcpiBoardInfo.c
> > > new file mode 100644
> > > index 0000000000..28ca4b5799
> > > --- /dev/null
> > > +++ b/UefiPayloadPkg/Library/PciSegmentInfoLibAcpiBoardInfo/PciSegme
> > > +++ ntIn
> > > +++ foLibAcpiBoardInfo.c
> > > @@ -0,0 +1,55 @@
> > > +/** @file+ PCI Segment Information Library that returns one
> > > +segment
> > > whose+ segment base address is retrieved from AcpiBoardInfo HOB.++
> > > Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>+
> > > SPDX-License-
> > > Identifier: BSD-2-Clause-Patent++**/++#include <PiDxe.h>+#include
> > > <Guid/AcpiBoardInfoGuid.h>++#include <Library/HobLib.h>+#include
> > > <Library/PciSegmentInfoLib.h>+#include <Library/DebugLib.h>++STATIC
> > > PCI_SEGMENT_INFO mPciSegment0 = {+ 0, // Segment number+ 0, //
> > > To be fixed later+ 0, // Start bus number+ 255 // End bus
> > > number+};++/**+ Return an array of PCI_SEGMENT_INFO holding the
> > > segment information.++ Note: The returned array/buffer is owned by
> > > callee.++ @param Count Return the count of segments.++ @retval A
> > > callee owned array holding the segment
> > > information.+**/+PCI_SEGMENT_INFO *+GetPciSegmentInfo (+ UINTN
> > > *Count+ )+{+ EFI_HOB_GUID_TYPE *GuidHob;+ ACPI_BOARD_INFO
> *AcpiBoardInfo;++ ASSERT (Count != NULL);++ if (mPciSegment0.BaseAddress
> > > == 0) {+ //+ // Find the acpi board information guid hob+ //+
> GuidHob =
> > > GetFirstGuidHob (&gUefiAcpiBoardInfoGuid);+ ASSERT (GuidHob !=
> NULL);++
> > > AcpiBoardInfo = (ACPI_BOARD_INFO *) GET_GUID_HOB_DATA (GuidHob);+
> > > mPciSegment0.BaseAddress = AcpiBoardInfo->PcieBaseAddress;+ }+
> > > *Count = 1;+ return &mPciSegment0;+}diff --git
> > > a/UefiPayloadPkg/Library/PciSegmentInfoLibAcpiBoardInfo/PciSegmentIn
> > > foLib
> > > AcpiBoardInfo.inf
> > > b/UefiPayloadPkg/Library/PciSegmentInfoLibAcpiBoardInfo/PciSegmentIn
> > > foLib
> > > AcpiBoardInfo.inf
> > > new file mode 100644
> > > index 0000000000..ec4dbaaa55
> > > --- /dev/null
> > > +++ b/UefiPayloadPkg/Library/PciSegmentInfoLibAcpiBoardInfo/PciSegme
> > > +++ ntIn
> > > +++ foLibAcpiBoardInfo.inf
> > > @@ -0,0 +1,36 @@
> > > +## @file+# PCI Segment Information Library that returns one segment
> > > whose+# segment base address is retrieved from AcpiBoardInfo HOB.+#+#
> > > Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>+#+#
> > > SPDX-
> > > License-Identifier: BSD-2-Clause-Patent+#+#+##++[Defines]+ INF_VERSION
> > > = 0x00010005+ BASE_NAME =
> PciSegmentInfoLibAcpiBoardInfo+
> > > FILE_GUID = 0EA82AA2-6C36-4FD5-BC90-FFA3ECB5E0CE+
> > > MODULE_TYPE = BASE+ VERSION_STRING = 1.0+
> > > LIBRARY_CLASS = PciSegmentInfoLib | DXE_DRIVER++#+# The
> > > following information is for reference only and not required by the build
> > > tools.+#+# VALID_ARCHITECTURES = IA32 X64 EBC+#++[Sources]+
> > > PciSegmentInfoLibAcpiBoardInfo.c++[Packages]+ MdePkg/MdePkg.dec+
> > > UefiPayloadPkg/UefiPayloadPkg.dec++[LibraryClasses]+ PcdLib+
> > > HobLib+ DebugLibdiff --git
> > > a/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
> > > b/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
> > > index 0736cd9954..e114039f82 100644
> > > --- a/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
> > > +++ b/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
> > > @@ -129,7 +129,8 @@ [LibraryClasses]
> > >
> > > PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf
> > > PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
> > > PciExpressLib|!endif-
> > >
> PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibP
> > > PciSegmentLib|ci.i
> > > nf+
> > >
> PciSegmentLib|MdePkg/Library/PciSegmentLibSegmentInfo/BasePciSegment
> > > PciSegmentLib|Li
> > > bSegmentInfo.inf+
> > > PciSegmentInfoLib|UefiPayloadPkg/Library/PciSegmentInfoLibAcpiBoardI
> > > PciSegmentInfoLib|nfo/Pc
> > > iSegmentInfoLibAcpiBoardInfo.inf
> > > PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> > > PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/Bas
> > > PeCoffGetEntryPointLib|ePeC
> > > offGetEntryPointLib.inf
> > >
> CacheMaintenanceLib|MdePkg/Library/BaseCacheMaintenanceLib/BaseCache
> > > MaintenanceLib.inf@@ -288,7 +289,6 @@ [PcdsFixedAtBuild]
> > > gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|TRUE
> > > gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21,
> 0xaa,
> > > 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4,
> > > 0x66, 0x23,
> > > 0x31 } -
> > > gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|$(PCIE_BASE) !if
> > > $(SOURCE_DEBUG_ENABLE)
> > >
> gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdDebugLoadImageMethod|0x2@
> > > @ -360,6 +360,8 @@ [PcdsDynamicDefault]
> > > gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|31
> > > gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|100 +
> > > gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|$(PCIE_BASE)+
> > >
> ################################################################
> > > ################ # # Components Section - list of all EDK II Modules
> > > needed by this Platform.--
> > > 2.26.2.windows.1
> >
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#60725): https://edk2.groups.io/g/devel/message/60725
Mute This Topic: https://groups.io/mt/74646708/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list