[edk2-devel] [PATCH edk2-platforms 3/3] Silicon/NXP: PciHostBridgeLib: Initialize only enabled PCIe controllers

[Leif Lindholm]

On Tue, Jun 02, 2020 at 00:57:38 +0530, Wasim Khan wrote:
> From: Wasim Khan <wasim.khan at nxp.com>
> 
> Based on the serdes protocol value in reset configuration
> word (RCW), different PCIe controllers are enabled.
> Get serdes protocol map and initialize only enabled PCIe
> controllers.
> 
> Signed-off-by: Wasim Khan <wasim.khan at nxp.com>
> ---
>  Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.inf |  1 +
>  Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.c   | 35 +++++++++++++++++++-
>  2 files changed, 35 insertions(+), 1 deletion(-)
> 
> diff --git a/Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.inf b/Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.inf
> index aa5a9dec7c34..6003da708698 100644
> --- a/Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.inf
> +++ b/Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.inf
> @@ -28,6 +28,7 @@ [LibraryClasses]
>    IoAccessLib
>    MemoryAllocationLib
>    PcdLib
> +  SocLib
>  
>  [FeaturePcd]
>    gNxpQoriqLsTokenSpaceGuid.PcdPciLutBigEndian
> diff --git a/Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.c b/Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.c
> index 549f4fa133fb..323afc2015ae 100644
> --- a/Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.c
> +++ b/Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.c
> @@ -15,6 +15,7 @@
>  #include <Library/MemoryAllocationLib.h>
>  #include <Library/PcdLib.h>
>  #include <Library/PciHostBridgeLib.h>
> +#include <Library/SerDes.h>
>  #include <Pcie.h>
>  #include <Protocol/PciHostBridgeResourceAllocation.h>
>  #include <Protocol/PciRootBridgeIo.h>
> @@ -719,6 +720,32 @@ PcieSetupCntrl (
>  }
>  
>  /**
> +   This function checks whether PCIe is enabled or not
> +   depending upon SoC serdes protocol map
> +
> +   @param  PcieNum PCIe number.
> +
> +   @return The     PCIe number enabled in map.
> +   @return FALSE   PCIe number is disabled in map.
> +
> +**/
> +STATIC
> +BOOLEAN
> +IsPcieNumEnabled(
> +  IN UINTN PcieNum
> +  )
> +{
> +  UINT64 SerDesProtocolMap;
> +
> +  SerDesProtocolMap = 0x0;

There is nothing magical about hexadecimal zero. 0 is sufficient.

> +
> +  // Reading serdes protocol map
> +  GetSerdesProtocolMaps (&SerDesProtocolMap);
> +
> +  return (SerDesProtocolMap & (0x1u << (PcieNum))) != 0 ;

BIT0, or simply 1.
No space before ;.

/
    Leif

> +}
> +
> +/**
>    Return all the root bridge instances in an array.
>  
>    @param Count  Return the count of root bridge instances.
> @@ -750,13 +777,19 @@ PciHostBridgeGetRootBridges (
>      PciPhyIoAddr [Idx] =  PCI_SEG0_PHY_IO_BASE + (PCI_BASE_DIFF * Idx);
>      Regs[Idx] =  PCI_SEG0_DBI_BASE + (PCI_DBI_SIZE_DIFF * Idx);
>  
> +    // Check is the PCIe controller is enabled
> +    if (IsPcieNumEnabled (Idx + 1) == 0) {
> +      DEBUG ((DEBUG_INFO, "PCIE%d reg @ 0x%lx is disabled \n", Idx + 1, Regs[Idx]));
> +      continue;
> +    }
> +
>      // Check PCIe Link
>      LinkUp = PcieLinkUp(Regs[Idx], Idx);
>  
>      if (!LinkUp) {
>        continue;
>      }
> -    DEBUG ((DEBUG_INFO, "PCIE%d Passed Linkup Phase\n", Idx + 1));
> +    DEBUG ((DEBUG_INFO, "PCIE%d reg @ 0x%lx :Passed Linkup Phase\n", Idx + 1, Regs[Idx]));
>      // Set up PCIe Controller and ATU windows
>      PcieSetupCntrl (Regs[Idx],
>                      PciPhyCfg0Addr[Idx],
> -- 
> 2.7.4
> 

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#60764): https://edk2.groups.io/g/devel/message/60764
Mute This Topic: https://groups.io/mt/74612745/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-