[edk2-devel] EDK2 environment setup
Sean
spbrogan at outlook.com
Mon May 4 17:40:27 UTC 2020
A few things.
1. Do you have a log from the console?
2. Are you running WinHost.exe from a command line with current working
directory set to the same folder? Is it finding your FD?
For example if I run from the wrong folder i see.
C:\src\Platform-Ci\edk2\Build\EmulatorX64\DEBUG_VS2019>X64\WinHost.exe
EDK II WIN Host Emulation Environment from http://www.tianocore.org/edk2/
BootMode 0x00
OS Emulator passing in 128 KB of temp RAM at 0xe60a0000 to SEC
ERROR : Can not open Firmware Device File ../FV/FV_RECOVERY.fd (0xE).
Exiting.
If I run with CWD set to X64 folder then it works fine.
3. If you want, the platform CI has landed into master. The emulator is
being build and booted to shell on each PR. You can follow the same
process.
https://github.com/tianocore/edk2/tree/master/EmulatorPkg/PlatformCI#building-with-pytools-for-emulatorpkg
Thanks
Sean
On 5/3/2020 10:17 PM, Navdeeppal.Singh at dell.com wrote:
> Hi,
> Any suggestions.
>
> Regards,
> Navdeep
>
> From: Singh, Navdeeppal
> Sent: Thursday, April 30, 2020 10:39 AM
> To: 'Leif Lindholm'; 'devel at edk2.groups.io'; 'guomin.jiang at intel.com'
> Cc: 'spbrogan at outlook.com'; 'sean.brogan at microsoft.com'; 'Bret.Barkelew at microsoft.com'; 'jim.slaughter at sage-micro.com'
> Subject: RE: [edk2-devel] EDK2 environment setup
>
>
> Hi,
>
> After launching Winhost.exe. Emulator exits after displaying "Sec Has Started".
>
> I have not built any platform pkgs yet. This is just after building Emulator Pkg .
>
> To boot to Shell what shall I do. How can I achive this.
>
> Is there a document I can refer to.
>
> [cid:image001.jpg at 01D62201.0F368030]
>
>
>
> Regards,
>
> Navdeep
>
> -----Original Message-----
> From: Singh, Navdeeppal
> Sent: Tuesday, April 28, 2020 3:23 PM
> To: 'Leif Lindholm'; devel at edk2.groups.io<mailto:devel at edk2.groups.io>; guomin.jiang at intel.com<mailto:guomin.jiang at intel.com>
> Cc: spbrogan at outlook.com<mailto:spbrogan at outlook.com>; sean.brogan at microsoft.com<mailto:sean.brogan at microsoft.com>; Bret.Barkelew at microsoft.com<mailto:Bret.Barkelew at microsoft.com>; jim.slaughter at sage-micro.com<mailto:jim.slaughter at sage-micro.com>
> Subject: RE: [edk2-devel] EDK2 environment setup
>
>
>
> Thank you.
>
> Able to build Emulator pkg after adding VS2019 build options.
>
> Regards,
>
> Navdeep
>
>
>
> -----Original Message-----
>
> From: Leif Lindholm <leif at nuviainc.com<mailto:leif at nuviainc.com>>
>
> Sent: Tuesday, April 28, 2020 3:18 PM
>
> To: devel at edk2.groups.io<mailto:devel at edk2.groups.io>; guomin.jiang at intel.com<mailto:guomin.jiang at intel.com>
>
> Cc: Singh, Navdeeppal; spbrogan at outlook.com<mailto:spbrogan at outlook.com>; sean.brogan at microsoft.com<mailto:sean.brogan at microsoft.com>; Bret.Barkelew at microsoft.com<mailto:Bret.Barkelew at microsoft.com>; jim.slaughter at sage-micro.com<mailto:jim.slaughter at sage-micro.com>
>
> Subject: Re: [edk2-devel] EDK2 environment setup
>
>
>
>
>
> [EXTERNAL EMAIL]
>
>
>
> My bad, was checking on a different computer than I thought where the
>
> edk2 checkout wasn't up to date. Still, gives me a way to close out the stackoverflow question, so thanks :)
>
>
>
> /
>
> Leif
>
>
>
> On Tue, Apr 28, 2020 at 09:35:22 +0000, Guomin Jiang wrote:
>
>> It is known issue and can refer https://bugzilla.tianocore.org/show_bug.cgi?id=2637 for detail.
>
>>
>
>> It have been fixed in newest repository, you can update to the newest repository and try again.
>
>>
>
>> From: devel at edk2.groups.io<mailto:devel at edk2.groups.io> <devel at edk2.groups.io<mailto:devel at edk2.groups.io>> On Behalf Of
>
>> Navdeeppal.Singh at dell.com<mailto:Navdeeppal.Singh at dell.com>
>
>> Sent: Tuesday, April 28, 2020 5:15 PM
>
>> To: spbrogan at outlook.com<mailto:spbrogan at outlook.com>; devel at edk2.groups.io<mailto:devel at edk2.groups.io>;
>
>> sean.brogan at microsoft.com<mailto:sean.brogan at microsoft.com>; Bret.Barkelew at microsoft.com<mailto:Bret.Barkelew at microsoft.com>;
>
>> jim.slaughter at sage-micro.com<mailto:jim.slaughter at sage-micro.com>
>
>> Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
>>
>
>>
>
>> Hi,
>
>>
>
>> Yes I am using edksetup.bat.
>
>>
>
>> I was able to fix VFR compiler after making path changes.
>
>>
>
>> And I was able to build MdeModulePkg Successfully.
>
>>
>
>> But while building Emulator Pkg. I see the following Linker Error. Do I need to build some other module before building Emulator Pkg.
>
>>
>
>>
>
>>
>
>> [cid:image001.jpg at 01D61D83.5E9F0750]
>
>>
>
>>
>
>>
>
>> Regards,
>
>>
>
>> Navdeep
>
>>
>
>> -----Original Message-----
>
>> From: Sean Brogan <spbrogan at outlook.com<mailto:spbrogan at outlook.com<mailto:spbrogan at outlook.com%3cmailto:spbrogan at outlook.com>>>
>
>> Sent: Tuesday, April 28, 2020 2:28 AM
>
>> To: devel at edk2.groups.io<mailto:devel at edk2.groups.io<mailto:devel at edk2.groups.io%3cmailto:devel at edk2.groups.io>>; Singh,
>
>> Navdeeppal;
>
>> sean.brogan at microsoft.com<mailto:sean.brogan at microsoft.com<mailto:sean.brogan at microsoft.com%3cmailto:sean.brogan at microsoft.com>>;
>
>> Bret.Barkelew at microsoft.com<mailto:Bret.Barkelew at microsoft.com<mailto:Bret.Barkelew at microsoft.com%3cmailto:Bret.Barkelew at microsoft.com>>;
>
>> jim.slaughter at sage-micro.com<mailto:jim.slaughter at sage-micro.com<mailto:jim.slaughter at sage-micro.com%3cmailto:jim.slaughter at sage-micro.com>>
>
>> Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
>>
>
>>
>
>>
>
>>
>
>>
>
>> [EXTERNAL EMAIL]
>
>>
>
>>
>
>>
>
>> Are you using edksetup.bat? I would have expected this code to set the path for you.
>
>>
>
>> https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat#<https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat>
>
>> L134
>
>>
>
>> So without more logs i don't know.
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>> If you want to use "stuart" (my preferred method) I have a commit here for EmulatorPkg which has a platformbuild.py and readme.md that describes the process. This should be committed to edk2 master this week to enable Platform CI for every PR.
>
>>
>
>>
>
>>
>
>> Here is the readme and details.
>
>>
>
>> https://github.com/spbrogan/edk2/tree/PlatformAndCoreCIForOvmfArmVirtE
>
>> mulatorPackages_v10/EmulatorPkg/PlatformCI
>
>>
>
>>
>
>>
>
>> Here is the commit you should cherry-pick if you want to try it.
>
>>
>
>>
>
>>
>
>> https://github.com/spbrogan/edk2/commit/8bdb9075b52a9d1c196b068729eefd
>
>> 76f068d0a2
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>> Thanks
>
>>
>
>> Sean
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>>
>
>> On 4/27/2020 1:26 AM, Navdeeppal.Singh at dell.com<mailto:Navdeeppal.Singh at dell.com<mailto:Navdeeppal.Singh at dell.com%3cmailto:Navdeeppal.Singh at dell.com>> wrote:
>
>>
>
>>> Hi,
>
>>
>
>>>
>
>>
>
>>> Thanks for your help.
>
>>
>
>>>
>
>>
>
>>> I am to build base tools and able to generate bin files.
>
>>
>
>>>
>
>>
>
>>> "Build" command is generated.
>
>>
>
>>>
>
>>
>
>>> Later, I am trying to build "EmulatorPkg".
>
>>
>
>>>
>
>>
>
>>> And running into VfrCompile error.
>
>>
>
>>>
>
>>
>
>>> 'VfrCompile' is not recognized as an internal or external command,
>
>>
>
>>>
>
>>
>
>>> operable program or batch file.
>
>>
>
>>>
>
>>
>
>>> NMAKE : fatal error U1077: '"VfrCompile' : return code '0x1'
>
>>
>
>>>
>
>>
>
>>> Stop.
>
>>
>
>>>
>
>>
>
>>> 'VfrCompile' is not recognized as an internal or external command,
>
>>
>
>>>
>
>>
>
>>> operable program or batch file.
>
>>
>
>>>
>
>>
>
>>> I can see VfrCompile.exe generated in "BaseTools".
>
>>
>
>>>
>
>>
>
>>> Attached build log for "Emulator Pkg".
>
>>
>
>>>
>
>>
>
>>> I tried checking the Env Paths .
>
>>
>
>>>
>
>>
>
>>> Regards,
>
>>
>
>>>
>
>>
>
>>> Navdeep
>
>>
>
>>>
>
>>
>
>>> *From:* Sean Brogan
>
>>> <sean.brogan at microsoft.com<mailto:sean.brogan at microsoft.com<mailto:sean.brogan at microsoft.com%3cmailto:sean.brogan at microsoft.com>>>
>
>>
>
>>> *Sent:* Friday, April 24, 2020 12:33 AM
>
>>
>
>>> *To:* devel at edk2.groups.io<mailto:devel at edk2.groups.io<mailto:devel at edk2.groups.io%3cmailto:devel at edk2.groups.io>>; Singh,
>
>>> Navdeeppal; Bret Barkelew;
>
>>
>
>>> jim.slaughter at sage-micro.com<mailto:jim.slaughter at sage-micro.com<mailto:jim.slaughter at sage-micro.com%3cmailto:jim.slaughter at sage-micro.com>>
>
>>
>
>>> *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
>>
>
>>>
>
>>
>
>>> [EXTERNAL EMAIL]
>
>>
>
>>>
>
>>
>
>>> Navdeep,
>
>>
>
>>>
>
>>
>
>>> Yes since the 202002 stable tag there have been submodules
>
>>> introduced
>
>>
>
>>> to the basetools. If you look closely you will see in the CI
>
>>> process
>
>>
>
>>> this required a change where stuart_setup is run before calling
>
>>
>
>>> edk2toolsbuild.py.
>
>>
>
>>>
>
>>
>
>>> https://github.com/tianocore/edk2/commit/e1fbff3ded87704fb0086f9b5fb
>
>>> 36
>
>>
>
>>> 8080eb4db51#diff-6973939bf9ad6f6a3082d99ce3b32ff1
>
>>
>
>>>
>
>>
>
>>> If you are using "stuart" to build then that is the suggested path
>
>>> as
>
>>
>
>>> stuar_setup will init your submodules listed in the
>
>>> RequiredSubmodules
>
>>
>
>>> (https://github.com/tianocore/edk2/blob/master/.pytool/CISettings.py#L136).
>
>>
>
>>> Given that the edk2 project and ecosystem has numerous ways to setup
>
>>
>
>>> your environment and build, you can also just make sure your
>
>>> workspace
>
>>
>
>>> is complete prior to running Edk2ToolsBuild.py. In this case you
>
>>> only
>
>>
>
>>> need to run "git submodule update --init"
>
>>
>
>>>
>
>>
>
>>> I just did this and it works fine with VS2019.
>
>>
>
>>>
>
>>
>
>>> Jim,
>
>>
>
>>>
>
>>
>
>>> Just as fyi as I know there are lots of reasons for toolchain selection.
>
>>
>
>>>
>
>>
>
>>> I believe the Visual studio build tools are available free of charge
>
>>
>
>>> (not the IDE but the compilers). Directions here.
>
>>
>
>>> https://microsoft.github.io/mu/CodeDevelopment/prerequisites/#visual
>
>>> -s
>
>>
>
>>> tudio-2019-preferred
>
>>
>
>>>
>
>>
>
>>> Thanks
>
>>
>
>>>
>
>>
>
>>> Sean
>
>>
>
>>>
>
>>
>
>>> *From:* devel at edk2.groups.io<mailto:devel at edk2.groups.io<mailto:devel at edk2.groups.io%3cmailto:devel at edk2.groups.io>>
>
>>> <mailto:devel at edk2.groups.io>
>
>>
>
>>> <devel at edk2.groups.io
>
>>> <mailto:devel at edk2.groups.io<mailto:devel at edk2.groups.io%20%3cmailto
>
>>> :devel at edk2.groups.io>>> *On Behalf Of
>
>>
>
>>> *Navdeeppal.Singh via groups.io
>
>>
>
>>> *Sent:* Thursday, April 23, 2020 9:14 AM
>
>>
>
>>> *To:* Bret Barkelew <Bret.Barkelew at microsoft.com
>
>>
>
>>> <mailto:Bret.Barkelew at microsoft.com>>;
>
>>> devel at edk2.groups.io<mailto:devel at edk2.groups.io<mailto:devel at edk2.groups.io%3cmailto:devel at edk2.groups.io>>
>
>>
>
>>> <mailto:devel at edk2.groups.io>
>
>>
>
>>> *Subject:* Re: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
>>
>
>>>
>
>>
>
>>> Hi Bret,
>
>>
>
>>>
>
>>
>
>>> Yes PIP requirements are up to date.
>
>>
>
>>>
>
>>
>
>>> On further digging through the logging file BASETOOLS_BUILD.txt.
>
>>
>
>>>
>
>>
>
>>> INFO - subprocess not exit successfully
>
>>
>
>>>
>
>>
>
>>> INFO - Error while execute command 'nmake all' in direcotry
>
>>
>
>>> C:\edk2\BaseTools\Source\C\BrotliCompress
>
>>
>
>>>
>
>>
>
>>> Regards,
>
>>
>
>>>
>
>>
>
>>> Navdeep
>
>>
>
>>>
>
>>
>
>>> *From:* Bret Barkelew <Bret.Barkelew at microsoft.com
>
>>
>
>>> <mailto:Bret.Barkelew at microsoft.com>>
>
>>
>
>>> *Sent:* Thursday, April 23, 2020 9:37 PM
>
>>
>
>>> *To:* devel at edk2.groups.io<mailto:devel at edk2.groups.io<mailto:devel at edk2.groups.io%3cmailto:devel at edk2.groups.io>>
>
>>> <mailto:devel at edk2.groups.io>; Singh,
>
>>
>
>>> Navdeeppal
>
>>
>
>>> *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup
>
>>
>
>>>
>
>>
>
>>> [EXTERNAL EMAIL]
>
>>
>
>>>
>
>>
>
>>> Have you installed the up-to-date Python requirements? "pip install
>
>>
>
>>> -upgrade -r pip-requirements.txt"?
>
>>
>
>>>
>
>>
>
>>> That's the first thing I would check. Otherwise, happy to look at
>
>>> the
>
>>
>
>>> problem with you.
>
>>
>
>>>
>
>>
>
>>> - Bret
>
>>
>
>>>
>
>>
>
>>> *From: *NAVDEEPPAL_SINGH via groups.io
>
>>
>
>>> <mailto:NAVDEEPPAL_SINGH=DELL.COM at groups.io>
>
>>
>
>>> *Sent: *Thursday, April 23, 2020 6:05 AM
>
>>
>
>>> *To: *devel at edk2.groups.io<mailto:*devel at edk2.groups.io<mailto:*devel at edk2.groups.io%3cmailto:*devel at edk2.groups.io>>
>
>>> <mailto:devel at edk2.groups.io>
>
>>
>
>>> *Subject: *[EXTERNAL] [edk2-devel] EDK2 environment setup
>
>>
>
>>>
>
>>
>
>>> I am trying to setup EDK2 environment setup from Tianocore/EDK2.
>
>>
>
>>> While doing the Base Tool setup. After running
>
>>
>
>>> BaseTool/EDK2ToolsBuild.py -t VS2019 Getting following error :-
>
>>
>
>>> c:\edk2\BaseTools>python Edk2ToolsBuild.py -t VS2019 SECTION - Init
>
>>
>
>>> SDE SECTION - Loading Plugins SECTION - Start Invocable Tool
>
>>> Traceback
>
>>
>
>>> (most recent call last):
>
>>
>
>>> File "Edk2ToolsBuild.py", line 177, in <module>
>
>>
>
>>> main()
>
>>
>
>>> File "Edk2ToolsBuild.py", line 173, in main
>
>>
>
>>> Edk2ToolsBuild().Invoke()
>
>>
>
>>> File "C:\Program
>
>>
>
>>> Files\Python38\lib\site-packages\edk2toolext\base_abstract_invocable
>
>>> .p
>
>>
>
>>> y", line 141, in Invoke
>
>>
>
>>> retcode = self.Go()
>
>>
>
>>> File "Edk2ToolsBuild.py", line 139, in Go
>
>>
>
>>> raise Exception("Failed to build.")
>
>>
>
>>> Exception: Failed to build.
>
>>
>
>>>
>
>>
>
>>> set EDK_TOOLS_PATH=C:\edk2\BaseTools
>
>>
>
>>> set EDK_TOOLS_BIN=C:\edk2\BaseTools\Bin\Win32
>
>>
>
>>> Can some one help
>
>>
>
>>>
>
>>
>
>>
>
>>
>
>>
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#58563): https://edk2.groups.io/g/devel/message/58563
Mute This Topic: https://groups.io/mt/73323736/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list