[edk2-devel] [PATCH edk2-platforms 4/5] Platform/RaspberryPi3: query firmware for 16550 input clock at boot

[Pete Batard]

On 2020.05.06 11:31, Ard Biesheuvel wrote:
> On 5/6/20 12:18 PM, Pete Batard wrote:
>> One remark below:
>>
>> On 2020.05.05 19:11, Ard Biesheuvel wrote:
>>> On 5/5/20 4:50 PM, Ard Biesheuvel wrote:
>>>> Query the firmware for the clock rate that is used to drive the
>>>> 16550 baud clock, so that we can program the correct baud rate.
>>>>
>>>> Co-authored-by: Pete Batard <pete at akeo.ie>
>>>> Co-authored-by: Andrei Warkentin <andrey.warkentin at gmail.com>
>>>> Co-authored-by: Ard Biesheuvel <ard.biesheuvel at arm.com>
>>>> Signed-off-by: Pete Batard <pete at akeo.ie>
>>>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel at arm.com>
>>>> ---
>>>> Platform/RaspberryPi/Library/PlatformLib/AArch64/RaspberryPiHelper.S 
>>>> | 25 +++++++++++++++++++-
>>>>   1 file changed, 24 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git 
>>>> a/Platform/RaspberryPi/Library/PlatformLib/AArch64/RaspberryPiHelper.S 
>>>> b/Platform/RaspberryPi/Library/PlatformLib/AArch64/RaspberryPiHelper.S
>>>> index 91dfe1bb981e..35580e4ed73a 100644
>>>> --- 
>>>> a/Platform/RaspberryPi/Library/PlatformLib/AArch64/RaspberryPiHelper.S
>>>> +++ 
>>>> b/Platform/RaspberryPi/Library/PlatformLib/AArch64/RaspberryPiHelper.S
>>>> @@ -3,7 +3,7 @@
>>>>    *  Copyright (c) 2020, Andrei Warkentin <andrey.warkentin at gmail.com>
>>>>    *  Copyright (c) 2019-2020, Pete Batard <pete at akeo.ie>
>>>>    *  Copyright (c) 2016, Linaro Limited. All rights reserved.
>>>> - *  Copyright (c) 2011-2013, ARM Limited. All rights reserved.
>>>> + *  Copyright (c) 2011-2020, ARM Limited. All rights reserved.
>>>>    *
>>>>    *  SPDX-License-Identifier: BSD-2-Clause-Patent
>>>>    *
>>>> @@ -85,6 +85,14 @@ ASM_FUNC (ArmPlatformPeiBootAction)
>>>>       adr     x2, mBoardRevision
>>>>       str     w0, [x2]
>>>> +#if (RPI_MODEL == 3)
>>>
>>> As noted by Pete off-list, doing this doesn't work unless we add 
>>> something like
>>>
>>> GCC:*_*_*_PP_FLAGS          = -DRPI_MODEL=3
>>>
>>> to the [BuildOptions] in RPi3.dsc
>>>
>>>
>>>
>>>> +    run     .Lclkinfo_buffer
>>>> +
>>>> +    ldr     w0, .Lfrequency
>>>> +    adrp    x2, _gPcd_BinaryPatch_PcdSerialClockRate
>>>> +    str     w0, [x2, :lo12:_gPcd_BinaryPatch_PcdSerialClockRate]
>>>> +#endif
>>>> +
>>
>> Since we're modifying a patchable PCD here, shouldn't we add a:
>>
>> [PatchPcd]
>>    gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate
>>
>> section in PlatformLib.inf?
>>
> 
> We should add it, but we can add it to the [Pcd] section.
> 
> Alternatively, we could have different .INFs for RPi3 and RPi4, but that 
> is really overkill IMO.
> 
> Making it patchable on both platforms just to patch it on one is also 
> unnecessary I think. The current approach will ensure that we catch any 
> issues at build time, without any major hacks,].

Yeah, I'm also fine with what we have at the moment, and I sure don't 
want separate .INFs for Pi3 and Pi4.

> 
>> Of course, if we do that, we can't keep PcdSerialClockRate fixed for 
>> RPi4, as the build process will complain about PCD mismatch.
>>
>> I also wouldn't mind a comment that explains how one arrives at 
>> figuring out that "_gPcd_BinaryPatch_PcdSerialClockRate" should be 
>> used to locate our address (and possibly the addition of :lo12:), 
>> because I don't think it's going to be that straightforward for people 
>> reading the code for the first time, though I fear that the 
>> explanation will boil down to "we need to do it this specific way for 
>> a gcc aarch64 relocation"...
>>
> 
> We don't actually need the adrp/str pair with the lo12 here, I will 
> replace it with adr. (Just muscle memory)

Sounds good, thanks!

/Pete

> 
> 
> 
>>>>       ret
>>>>       .align  4
>>>> @@ -127,6 +135,21 @@ ASM_FUNC (ArmPlatformPeiBootAction)
>>>>       .long   0                           // end tag
>>>>       .set    .Lrevinfo_size, . - .Lrevinfo_buffer
>>>> +#if (RPI_MODEL == 3)
>>>> +    .align  4
>>>> +.Lclkinfo_buffer:
>>>> +    .long   .Lclkinfo_size
>>>> +    .long   0x0
>>>> +    .long   RPI_MBOX_GET_CLOCK_RATE
>>>> +    .long   8                           // buf size
>>>> +    .long   4                           // input len
>>>> +    .long   4                           // clock id: 0x04 = Core/VPU
>>>> +.Lfrequency:
>>>> +    .long   0                           // frequency
>>>> +    .long   0                           // end tag
>>>> +    .set    .Lclkinfo_size, . - .Lclkinfo_buffer
>>>> +#endif
>>>> +
>>>>   //UINTN
>>>>   //ArmPlatformGetPrimaryCoreMpId (
>>>>   //  VOID
>>>>
>>>
>>>
>>> 
>>>
>>
>> With addition of "GCC:*_*_*_PP_FLAGS = -DRPI_MODEL=3" in the .dsc:
>> Reviewed-by: Pete Batard <pete at akeo.ie>
>>
> 
> 
> Thanks
> 


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#58698): https://edk2.groups.io/g/devel/message/58698
Mute This Topic: https://groups.io/mt/73999457/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-