[edk2-devel] [PATCH edk2-platforms v2 3/4] Silicon/Broadcom/BcmGenetDxe: fix multicast/broadcast handling

[Ard Biesheuvel]

Move the handling of the promiscuous receive control to the SNP
ReceiveFilters() method where it belongs. Given that we do not
support multicast filtering, only minimal handling is required to
test the promiscuous bit and program the MAC accordingly. Any
multicast handling will be done by the MNP layer above it.

For reception of broadcast frames, wire up the new helper that
programs the MDF filter bank accordingly.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel at arm.com>
---
 Silicon/Broadcom/Drivers/Net/BcmGenetDxe/DriverBinding.c |  7 +++----
 Silicon/Broadcom/Drivers/Net/BcmGenetDxe/SimpleNetwork.c | 20 +++++++++-----------
 2 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/DriverBinding.c b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/DriverBinding.c
index e3d015dd0820..a6102421cc26 100644
--- a/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/DriverBinding.c
+++ b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/DriverBinding.c
@@ -154,11 +154,10 @@ GenetDriverBindingStart (
   Genet->SnpMode.NvRamSize              = 0;
   Genet->SnpMode.NvRamAccessSize        = 0;
   Genet->SnpMode.ReceiveFilterMask      = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST |
-                                          EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST |
                                           EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST |
-                                          EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS |
-                                          EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;
-  Genet->SnpMode.ReceiveFilterSetting   = Genet->SnpMode.ReceiveFilterMask;
+                                          EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS;
+  Genet->SnpMode.ReceiveFilterSetting   = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST |
+                                          EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST;
   Genet->SnpMode.MaxMCastFilterCount    = 0;
   Genet->SnpMode.MCastFilterCount       = 0;
   Genet->SnpMode.IfType                 = NET_IFTYPE_ETHERNET;
diff --git a/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/SimpleNetwork.c b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/SimpleNetwork.c
index bf28448445d1..e6de4653cde9 100644
--- a/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/SimpleNetwork.c
+++ b/Silicon/Broadcom/Drivers/Net/BcmGenetDxe/SimpleNetwork.c
@@ -148,10 +148,6 @@ GenetSimpleNetworkInitialize (
   }
 
   GenetSetMacAddress (Genet, &Genet->SnpMode.CurrentAddress);
-  /*
-   * TODO: this belongs in GenetSimpleNetworkReceiveFilters, not here.
-   */
-  GenetSetPromisc (Genet, TRUE);
 
   GenetDmaInitRings (Genet);
 
@@ -306,6 +302,10 @@ GenetSimpleNetworkReceiveFilters (
   }
 
   Genet = GENET_PRIVATE_DATA_FROM_SNP_THIS (This);
+  if (((Enable | Disable) & ~Genet->SnpMode.ReceiveFilterMask) != 0 ||
+      (!ResetMCastFilter && MCastFilterCnt > Genet->SnpMode.MaxMCastFilterCount)) {
+    return EFI_INVALID_PARAMETER;
+  }
   if (Genet->SnpMode.State == EfiSimpleNetworkStopped) {
     return EFI_NOT_STARTED;
   }
@@ -313,13 +313,11 @@ GenetSimpleNetworkReceiveFilters (
     return EFI_DEVICE_ERROR;
   }
 
-  //
-  // Can't actually return EFI_UNSUPPORTED, so just ignore the filters
-  // (we set promiscuous mode ON inside GenetSimpleNetworkInitialize).
-  //
-  // TODO: move promisc handling here.
-  // TODO 2: support multicast/broadcast.
-  //
+  GenetEnableBroadcastFilter (Genet,
+    (Enable & ~Disable & EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST) != 0);
+
+  GenetSetPromisc (Genet,
+    (Enable & ~Disable & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0);
 
   return EFI_SUCCESS;
 }
-- 
2.17.1


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#58984): https://edk2.groups.io/g/devel/message/58984
Mute This Topic: https://groups.io/mt/74112948/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-