[edk2-devel] [edk2-platforms v2 5/6] Silicon/NXP/LS1046A: Apply USB errata workarounds

[Leif Lindholm]

On Wed, Oct 07, 2020 at 21:40:40 +0530, Meenakshi Aggarwal wrote:
> Apply USB errata workarounds for LS1046A SoC and
> make SATA, USB and SEC snoopable.
> 
> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
> ---
>  Silicon/NXP/LS1046A/LS1046A.dsc.inc           |  1 +
>  Silicon/NXP/LS1046A/Library/SocLib/SocLib.inf |  2 +
>  Silicon/NXP/LS1046A/Include/Soc.h             |  2 +
>  Silicon/NXP/LS1046A/Library/SocLib/SocLib.c   | 66 +++++++++++++++++++++++++++
>  4 files changed, 71 insertions(+)
> 
> diff --git a/Silicon/NXP/LS1046A/LS1046A.dsc.inc b/Silicon/NXP/LS1046A/LS1046A.dsc.inc
> index db110553605f..4e1d6a7ae7a2 100644
> --- a/Silicon/NXP/LS1046A/LS1046A.dsc.inc
> +++ b/Silicon/NXP/LS1046A/LS1046A.dsc.inc
> @@ -34,6 +34,7 @@ [PcdsFixedAtBuild.common]
>  
>  [PcdsFeatureFlag]
>    gNxpQoriqLsTokenSpaceGuid.PcdDcfgBigEndian|TRUE
> +  gNxpQoriqLsTokenSpaceGuid.PcdScfgBigEndian|TRUE
>    gNxpQoriqLsTokenSpaceGuid.PcdGpioControllerBigEndian|TRUE
>  
>  ################################################################################
> diff --git a/Silicon/NXP/LS1046A/Library/SocLib/SocLib.inf b/Silicon/NXP/LS1046A/Library/SocLib/SocLib.inf
> index 01ed0f6592d2..e2336bb18f29 100644
> --- a/Silicon/NXP/LS1046A/Library/SocLib/SocLib.inf
> +++ b/Silicon/NXP/LS1046A/Library/SocLib/SocLib.inf
> @@ -14,6 +14,7 @@ [Defines]
>    LIBRARY_CLASS                  = SocLib
>  
>  [Packages]
> +  ArmPkg/ArmPkg.dec
>    MdePkg/MdePkg.dec
>    Silicon/NXP/Chassis2/Chassis2.dec
>    Silicon/NXP/LS1046A/LS1046A.dec
> @@ -25,3 +26,4 @@ [LibraryClasses]
>  
>  [Sources.common]
>    SocLib.c
> +

This spuriously added blank line at the end of the file makes git
complain on import. Please drop it.

> diff --git a/Silicon/NXP/LS1046A/Include/Soc.h b/Silicon/NXP/LS1046A/Include/Soc.h
> index 84f433d5cb94..e1d97e531263 100644
> --- a/Silicon/NXP/LS1046A/Include/Soc.h
> +++ b/Silicon/NXP/LS1046A/Include/Soc.h
> @@ -25,6 +25,7 @@
>  #define LS1046A_QSPI0_SIZE           (SIZE_512MB)
>  
>  #define LS1046A_DCFG_ADDRESS         NXP_LAYERSCAPE_CHASSIS2_DCFG_ADDRESS
> +#define LS1046A_SCFG_ADDRESS         NXP_LAYERSCAPE_CHASSIS2_SCFG_ADDRESS
>  
>  /**
>    Reset Control Word (RCW) Bits
> @@ -59,5 +60,6 @@ Bit(s) | Field Name  | Description                  | Notes/comments
>  #define SYS_PLL_RAT(x)  (((x) >> 25) & 0x1f) // Bits 2-6
>  
>  typedef NXP_LAYERSCAPE_CHASSIS2_DEVICE_CONFIG LS1046A_DEVICE_CONFIG;
> +typedef NXP_LAYERSCAPE_CHASSIS2_SUPPLEMENTAL_CONFIG LS1046A_SUPPLEMENTAL_CONFIG;
>  
>  #endif // SOC_H__
> diff --git a/Silicon/NXP/LS1046A/Library/SocLib/SocLib.c b/Silicon/NXP/LS1046A/Library/SocLib/SocLib.c
> index 3b15aee6ecae..80342d7230e4 100644
> --- a/Silicon/NXP/LS1046A/Library/SocLib/SocLib.c
> +++ b/Silicon/NXP/LS1046A/Library/SocLib/SocLib.c
> @@ -11,6 +11,8 @@
>  #include <Library/ChassisLib.h>
>  #include <Library/DebugLib.h>
>  #include <Library/SocLib.h>
> +
> +#include <Library/SocLib.h>

Why include SocLib.h twice?

>  #include <Soc.h>
>  
>  /**
> @@ -65,6 +67,47 @@ SocGetClock (
>  }
>  
>  /**
> +   Function to select pins depending upon pcd using supplemental
> +   configuration unit(SCFG) extended RCW controlled pinmux control
> +   register which contains the bits to provide pin multiplexing control.
> +   This register is reset on HRESET.
> + **/
> +STATIC
> +VOID
> +ConfigScfgMux (VOID)
> +{
> +  LS1046A_SUPPLEMENTAL_CONFIG  *Scfg;
> +  UINT32 UsbPwrFault;
> +
> +  Scfg = (LS1046A_SUPPLEMENTAL_CONFIG *)LS1046A_SCFG_ADDRESS;
> +  // Configures functionality of the IIC3_SCL to USB2_DRVVBUS
> +  // Configures functionality of the IIC3_SDA to USB2_PWRFAULT
> +  // USB3 is not used, configure mux to IIC4_SCL/IIC4_SDA
> +  ScfgWrite32 ((UINTN)&Scfg->RcwPMuxCr0, SCFG_RCWPMUXCRO_NOT_SELCR_USB);
> +
> +  ScfgWrite32 ((UINTN)&Scfg->UsbDrvVBusSelCr, SCFG_USBDRVVBUS_SELCR_USB1);
> +  UsbPwrFault = (SCFG_USBPWRFAULT_DEDICATED << SCFG_USBPWRFAULT_USB3_SHIFT) |
> +                (SCFG_USBPWRFAULT_DEDICATED << SCFG_USBPWRFAULT_USB2_SHIFT) |
> +                (SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB1_SHIFT);
> +  ScfgWrite32 ((UINTN)&Scfg->UsbPwrFaultSelCr, UsbPwrFault);
> +  ScfgWrite32 ((UINTN)&Scfg->UsbPwrFaultSelCr, UsbPwrFault);
> +}
> +
> +STATIC
> +VOID
> +ApplyErrata (
> +  VOID
> +  )
> +{
> +  ErratumA009008 ();
> +  ErratumA009798 ();
> +  ErratumA008997 ();
> +  ErratumA009007 ();

Is there a required order to these workarounds? If not, can they be
done in numerical order?

/
    Leif

> +}
> +
> +
> +
> +/**
>    Function to initialize SoC specific constructs
>   **/
>  VOID
> @@ -72,7 +115,30 @@ SocInit (
>    VOID
>    )
>  {
> +  LS1046A_SUPPLEMENTAL_CONFIG  *Scfg;
> +
> +  Scfg = (LS1046A_SUPPLEMENTAL_CONFIG *)LS1046A_SCFG_ADDRESS;
> +
> +  /* Make SEC, SATA and USB reads and writes snoopable */
> +  ScfgOr32((UINTN)&Scfg->SnpCnfgCr, SCFG_SNPCNFGCR_SECRDSNP |
> +    SCFG_SNPCNFGCR_SECWRSNP | SCFG_SNPCNFGCR_USB1RDSNP |
> +    SCFG_SNPCNFGCR_USB1WRSNP | SCFG_SNPCNFGCR_USB2RDSNP |
> +    SCFG_SNPCNFGCR_USB2WRSNP | SCFG_SNPCNFGCR_USB3RDSNP |
> +    SCFG_SNPCNFGCR_USB3WRSNP | SCFG_SNPCNFGCR_SATARDSNP |
> +    SCFG_SNPCNFGCR_SATAWRSNP);
> +
> +  ApplyErrata ();
>    ChassisInit ();
>  
> +  //
> +  // Due to the extensive functionality present on the chip and the limited number of external
> +  // signals available, several functional blocks share signal resources through multiplexing.
> +  // In this case when there is alternate functionality between multiple functional blocks,
> +  // the signal's function is determined at the chip level (rather than at the block level)
> +  // typically by a reset configuration word (RCW) option. Some of the signals' function are
> +  // determined externel to RCW at Power-on Reset Sequence.
> +  //
> +  ConfigScfgMux ();
> +
>    return;
>  }
> -- 
> 1.9.1
> 


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#66013): https://edk2.groups.io/g/devel/message/66013
Mute This Topic: https://groups.io/mt/77359495/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-