[edk2-devel] [PATCH v3 2/3] Silicon/ARM/NeoverseN1Soc: Port PCI Segment Library
Khasim Mohammed
khasim.mohammed at arm.com
Mon Dec 6 10:22:00 UTC 2021
The BasePCISegment Library in MdePkg doesn't allow configuring
multiple segments required for PCIe and CCIX root port
enumeration. Therefore, a custom PCI Segment library is adapted
from SynQuacerPciSegmentLib and ported for N1Sdp.
Change-Id: I0a124b0ea2fb7a8ee652de2d66b977d848c509b4
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed at arm.com>
---
.../Library/PciSegmentLib/PciSegmentLib.c | 1425 +++++++++++++++++
.../Library/PciSegmentLib/PciSegmentLib.inf | 35 +
2 files changed, 1460 insertions(+)
create mode 100644 Silicon/ARM/NeoverseN1Soc/Library/PciSegmentLib/PciSegmentLib.c
create mode 100644 Silicon/ARM/NeoverseN1Soc/Library/PciSegmentLib/PciSegmentLib.inf
diff --git a/Silicon/ARM/NeoverseN1Soc/Library/PciSegmentLib/PciSegmentLib.c b/Silicon/ARM/NeoverseN1Soc/Library/PciSegmentLib/PciSegmentLib.c
new file mode 100644
index 0000000000..dbf00e1f14
--- /dev/null
+++ b/Silicon/ARM/NeoverseN1Soc/Library/PciSegmentLib/PciSegmentLib.c
@@ -0,0 +1,1425 @@
+/** @file
+ PCI Segment Library for N1SDP SoC with multiple RCs
+
+ Having two distinct root complexes is not supported by the standard
+ set of PciLib/PciExpressLib/PciSegmentLib, this PciSegmentLib
+ reimplements the functionality to support multiple root ports on
+ different segment numbers.
+
+ Copyright (c) 2007 - 2012, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2021, ARM Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PciLib.h>
+#include <Library/PciSegmentLib.h>
+#include <NeoverseN1Soc.h>
+
+typedef enum {
+ PciCfgWidthUint8 = 0,
+ PciCfgWidthUint16,
+ PciCfgWidthUint32,
+ PciCfgWidthMax
+} PCI_CFG_WIDTH;
+
+/**
+ Assert the validity of a PCI Segment address.
+ A valid PCI Segment address should not contain 1's in bits 28..31 and 48..63
+
+ @param A The address to validate.
+ @param M Additional bits to assert to be zero.
+**/
+#define ASSERT_INVALID_PCI_SEGMENT_ADDRESS(A,M) \
+ ASSERT (((A) & (0xffff0000f0000000ULL | (M))) == 0)
+
+/**
+ Function to return PCIe Physical Address for different RCs.
+ If address is invalid, then ASSERT().
+
+ @param Address Address passed from bus layer.
+
+ @return Return PCIe base address.
+
+**/
+STATIC
+UINT64
+PciSegmentLibGetConfigBase (
+ IN UINT64 Address
+ )
+{
+ switch ((UINT16)(Address >> 32)) {
+ case 0:
+ return FixedPcdGet32 (PcdPcieExpressBaseAddress);
+ case 1:
+ return FixedPcdGet32 (PcdCcixExpressBaseAddress);
+ default:
+ ASSERT (FALSE);
+ }
+ return 0;
+}
+
+/**
+ Internal worker function to read a PCI configuration register.
+
+ @param Address The address that encodes the PCI Bus, Device, Function
+ and Register.
+ @param Width The width of data to read
+
+ @return The value read from the PCI configuration register.
+**/
+STATIC
+UINT32
+PciSegmentLibReadWorker (
+ IN UINT64 Address,
+ IN PCI_CFG_WIDTH Width
+ )
+{
+ UINT64 Base;
+
+ Base = PciSegmentLibGetConfigBase (Address);
+
+ switch (Width) {
+ case PciCfgWidthUint8:
+ return PciRead8 (Base + (UINT32)Address);
+ case PciCfgWidthUint16:
+ return PciRead16 (Base + (UINT32)Address);
+ case PciCfgWidthUint32:
+ return PciRead32 (Base + (UINT32)Address);
+ default:
+ ASSERT (FALSE);
+ }
+ return 0;
+}
+
+/**
+ Internal worker function to write to a PCI configuration register.
+
+ @param Address The address that encodes the PCI Bus, Device, Function
+ and Register.
+ @param Width The width of data to write
+ @param Data The value to write.
+
+ @return The value written to the PCI configuration register.
+**/
+STATIC
+UINT32
+PciSegmentLibWriteWorker (
+ IN UINT64 Address,
+ IN PCI_CFG_WIDTH Width,
+ IN UINT32 Data
+ )
+{
+ UINT64 Base;
+
+ Base = PciSegmentLibGetConfigBase (Address);
+
+ switch (Width) {
+ case PciCfgWidthUint8:
+ PciWrite8 (Base + (UINT32)Address, Data);
+ break;
+ case PciCfgWidthUint16:
+ PciWrite16 (Base + (UINT32)Address, Data);
+ break;
+ case PciCfgWidthUint32:
+ PciWrite32 (Base + (UINT32)Address, Data);
+ break;
+ default:
+ ASSERT (FALSE);
+ }
+
+ return Data;
+}
+
+/**
+ Reads an 8-bit PCI configuration register.
+
+ Reads and returns the 8-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations are
+ serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+
+ @return The 8-bit PCI configuration register specified by the Address.
+**/
+UINT8
+EFIAPI
+PciSegmentRead8 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+ return (UINT8) PciSegmentLibReadWorker (Address, PciCfgWidthUint8);
+}
+
+/**
+ Writes an 8-bit PCI configuration register.
+
+ Writes the 8-bit Value in the PCI configuration register specified by the
+ Address. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus,
+ Device, Function, and Register.
+ @param Value The value to write.
+
+ @return The value written to the PCI configuration register.
+**/
+UINT8
+EFIAPI
+PciSegmentWrite8 (
+ IN UINT64 Address,
+ IN UINT8 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+ return (UINT8) PciSegmentLibWriteWorker (Address, PciCfgWidthUint8, Value);
+}
+
+/**
+ Performs a bitwise OR of an 8-bit PCI configuration register with
+ an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+**/
+UINT8
+EFIAPI
+PciSegmentOr8 (
+ IN UINT64 Address,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ (UINT8) (PciSegmentRead8 (Address) | OrData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with
+ an 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by
+ AndData, and writes the result to the 8-bit PCI configuration register
+ specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized. If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+**/
+UINT8
+EFIAPI
+PciSegmentAnd8 (
+ IN UINT64 Address,
+ IN UINT8 AndData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ (UINT8) (PciSegmentRead8 (Address) & AndData));
+}
+
+/**
+ Performs a bitwise AND of an 8-bit PCI configuration register with
+ an 8-bit value, followed by a bitwise OR with another 8-bit value.
+
+ Reads the 8-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, performs a bitwise OR between the result of the AND operation
+ and the value specified by OrData, and writes the result to the 8-bit
+ PCI configuration register specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentAndThenOr8 (
+ IN UINT64 Address,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ (UINT8) ((PciSegmentRead8 (Address) & AndData)
+ | OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in an 8-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldRead8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead8 (PciSegmentRead8 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 8-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldWrite8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 Value
+ )
+{
+ return PciSegmentWrite8 (Address,
+ BitFieldWrite8 (PciSegmentRead8 (Address),
+ StartBit,
+ EndBit,
+ Value));
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 8-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ BitFieldOr8 (PciSegmentRead8 (Address),
+ StartBit,
+ EndBit,
+ OrData));
+}
+
+/**
+ Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 8-bit register.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND between the read result and the value specified by AndData, and
+ writes the result to the 8-bit PCI configuration register specified by
+ Address. The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAnd8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ BitFieldAnd8 (PciSegmentRead8 (Address),
+ StartBit,
+ EndBit,
+ AndData));
+}
+
+/**
+ Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 8-bit port.
+
+ Reads the 8-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 8-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..7.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..7.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentBitFieldAndThenOr8 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT8 AndData,
+ IN UINT8 OrData
+ )
+{
+ return PciSegmentWrite8 (Address,
+ BitFieldAndThenOr8 (PciSegmentRead8 (Address),
+ StartBit,
+ EndBit,
+ AndData,
+ OrData));
+}
+
+/**
+ Reads a 16-bit PCI configuration register.
+
+ Reads and returns the 16-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+
+ @return The 16-bit PCI configuration register specified by Address.
+
+**/
+UINT16
+EFIAPI
+PciSegmentRead16 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+ return (UINT16) PciSegmentLibReadWorker (Address, PciCfgWidthUint16);
+}
+
+/**
+ Writes a 16-bit PCI configuration register.
+
+ Writes the 16-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param Value The value to write.
+
+ @return The Value written is returned.
+
+**/
+UINT16
+EFIAPI
+PciSegmentWrite16 (
+ IN UINT64 Address,
+ IN UINT16 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+ return (UINT16) PciSegmentLibWriteWorker (Address, PciCfgWidthUint16, Value);
+}
+
+/**
+ Performs a bitwise OR of a 16-bit PCI configuration register with
+ a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentOr16 (
+ IN UINT64 Address,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ (UINT16) (PciSegmentRead16 (Address) | OrData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with
+ a 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, and writes the result to the 16-bit PCI configuration register
+ specified by the Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAnd16 (
+ IN UINT64 Address,
+ IN UINT16 AndData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ (UINT16) (PciSegmentRead16 (Address) & AndData));
+}
+
+/**
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
+ value, followed a bitwise OR with another 16-bit value.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified by
+ AndData, performs a bitwise OR between the result of the AND operation and
+ the value specified by OrData, and writes the result to the 16-bit PCI
+ configuration register specified by the Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentAndThenOr16 (
+ IN UINT64 Address,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ (UINT16) ((PciSegmentRead16 (Address) & AndData)
+ | OrData));
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 16-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldRead16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead16 (PciSegmentRead16 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 16-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldWrite16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 Value
+ )
+{
+ return PciSegmentWrite16 (Address,
+ BitFieldWrite16 (PciSegmentRead16 (Address),
+ StartBit,
+ EndBit,
+ Value));
+}
+
+/**
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified
+ by OrData, and writes the result to the 16-bit PCI configuration register
+ specified by the Address.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ BitFieldOr16 (PciSegmentRead16 (Address),
+ StartBit,
+ EndBit,
+ OrData));
+}
+
+/**
+ Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR,
+ and writes the result back to the bit field in the 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 16-bit PCI configuration register
+ specified by the Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations are
+ serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 16-bit boundary, then ASSERT().
+ If StartBit is greater than 7, then ASSERT().
+ If EndBit is greater than 7, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ The ordinal of the least significant bit in a byte is
+ bit 0.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ The ordinal of the most significant bit in a byte is bit 7.
+ @param AndData The value to AND with the read value from the PCI
+ configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAnd16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ BitFieldAnd16 (PciSegmentRead16 (Address),
+ StartBit,
+ EndBit,
+ AndData));
+}
+
+/**
+ Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 16-bit port.
+
+ Reads the 16-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 16-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 15, then ASSERT().
+ If EndBit is greater than 15, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..15.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..15.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT16
+EFIAPI
+PciSegmentBitFieldAndThenOr16 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT16 AndData,
+ IN UINT16 OrData
+ )
+{
+ return PciSegmentWrite16 (Address,
+ BitFieldAndThenOr16 (PciSegmentRead16 (Address),
+ StartBit,
+ EndBit,
+ AndData,
+ OrData));
+}
+
+/**
+ Reads a 32-bit PCI configuration register.
+
+ Reads and returns the 32-bit PCI configuration register specified by Address.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+
+ @return The 32-bit PCI configuration register specified by Address.
+
+**/
+UINT32
+EFIAPI
+PciSegmentRead32 (
+ IN UINT64 Address
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+ return PciSegmentLibReadWorker (Address, PciCfgWidthUint32);
+}
+
+/**
+ Writes a 32-bit PCI configuration register.
+
+ Writes the 32-bit PCI configuration register specified by Address with the
+ value specified by Value. Value is returned. This function must guarantee
+ that all PCI read and write operations are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param Value The value to write.
+
+ @return The parameter of Value.
+
+**/
+UINT32
+EFIAPI
+PciSegmentWrite32 (
+ IN UINT64 Address,
+ IN UINT32 Value
+ )
+{
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+ return PciSegmentLibWriteWorker (Address, PciCfgWidthUint32, Value);
+}
+
+/**
+ Performs a bitwise OR of a 32-bit PCI configuration register with a
+ 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise OR between the read result and the value specified
+ by OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function, and Register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentOr32 (
+ IN UINT64 Address,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) | OrData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with
+ a 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, and writes the result to the 32-bit PCI configuration register
+ specified by Address.
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAnd32 (
+ IN UINT64 Address,
+ IN UINT32 AndData
+ )
+{
+ return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) & AndData);
+}
+
+/**
+ Performs a bitwise AND of a 32-bit PCI configuration register with
+ a 32-bit value, followed by a bitwise OR with another 32-bit value.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, performs a bitwise OR between the result of the AND operation
+ and the value specified by OrData, and writes the result to the 32-bit
+ PCI configuration register specified by Address.
+
+ The value written to the PCI configuration register is returned.
+ This function must guarantee that all PCI read and write operations
+ are serialized.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+ @param Address The address that encodes the PCI Segment, Bus, Device,
+ Function and Register.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentAndThenOr32 (
+ IN UINT64 Address,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address,
+ (PciSegmentRead32 (Address) & AndData) | OrData);
+}
+
+/**
+ Reads a bit field of a PCI configuration register.
+
+ Reads the bit field in a 32-bit PCI configuration register. The bit field is
+ specified by the StartBit and the EndBit. The value of the bit field is
+ returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+
+ @param Address The PCI configuration register to read.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+
+ @return The value of the bit field read from the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldRead32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit
+ )
+{
+ return BitFieldRead32 (PciSegmentRead32 (Address), StartBit, EndBit);
+}
+
+/**
+ Writes a bit field to a PCI configuration register.
+
+ Writes Value to the bit field of the PCI configuration register. The bit
+ field is specified by the StartBit and the EndBit. All other bits in the
+ destination PCI configuration register are preserved. The new value of the
+ 32-bit register is returned.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If Value is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param Value The new value of the bit field.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldWrite32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 Value
+ )
+{
+ return PciSegmentWrite32 (Address,
+ BitFieldWrite32 (PciSegmentRead32 (Address),
+ StartBit,
+ EndBit,
+ Value));
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
+ writes the result back to the bit field in the 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise OR between the read result and the value specified by
+ OrData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register is
+ returned. This function must guarantee that all PCI read and write operations
+ are serialized. Extra left bits in OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param OrData The value to OR with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (Address,
+ BitFieldOr32 (PciSegmentRead32 (Address),
+ StartBit,
+ EndBit,
+ OrData));
+}
+
+/**
+ Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
+ AND, and writes the result back to the bit field in the 32-bit register.
+
+ Reads the 32-bit PCI configuration register specified by Address,
+ performs a bitwise AND between the read result and the value specified
+ by AndData, and writes the result to the 32-bit PCI configuration register
+ specified by Address. The value written to the PCI configuration register
+ is returned. This function must guarantee that all PCI read and write
+ operations are serialized. Extra left bits in AndData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If Address is not aligned on a 32-bit boundary, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit and
+ EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAnd32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData
+ )
+{
+ return PciSegmentWrite32 (Address,
+ BitFieldAnd32 (PciSegmentRead32 (Address),
+ StartBit,
+ EndBit,
+ AndData));
+}
+
+/**
+ Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
+ bitwise OR, and writes the result back to the bit field in the
+ 32-bit port.
+
+ Reads the 32-bit PCI configuration register specified by Address, performs a
+ bitwise AND followed by a bitwise OR between the read result and
+ the value specified by AndData, and writes the result to the 32-bit PCI
+ configuration register specified by Address. The value written to the PCI
+ configuration register is returned. This function must guarantee that all PCI
+ read and write operations are serialized. Extra left bits in both AndData and
+ OrData are stripped.
+
+ If any reserved bits in Address are set, then ASSERT().
+ If StartBit is greater than 31, then ASSERT().
+ If EndBit is greater than 31, then ASSERT().
+ If EndBit is less than StartBit, then ASSERT().
+ If AndData is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+ If OrData is larger than the bitmask value range specified by StartBit
+ and EndBit, then ASSERT().
+
+ @param Address The PCI configuration register to write.
+ @param StartBit The ordinal of the least significant bit in the bit field.
+ Range 0..31.
+ @param EndBit The ordinal of the most significant bit in the bit field.
+ Range 0..31.
+ @param AndData The value to AND with the PCI configuration register.
+ @param OrData The value to OR with the result of the AND operation.
+
+ @return The value written back to the PCI configuration register.
+
+**/
+UINT32
+EFIAPI
+PciSegmentBitFieldAndThenOr32 (
+ IN UINT64 Address,
+ IN UINTN StartBit,
+ IN UINTN EndBit,
+ IN UINT32 AndData,
+ IN UINT32 OrData
+ )
+{
+ return PciSegmentWrite32 (
+ Address,
+ BitFieldAndThenOr32 (PciSegmentRead32 (Address),
+ StartBit,
+ EndBit,
+ AndData,
+ OrData));
+}
+
+/**
+ Reads a range of PCI configuration registers into a caller supplied buffer.
+
+ Reads the range of PCI configuration registers specified by StartAddress and
+ Size into the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be read. Size is
+ returned. When possible 32-bit PCI configuration read cycles are used to read
+ from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ and 16-bit PCI configuration read cycles may be used at the beginning and the
+ end of the range.
+
+ If any reserved bits in StartAddress are set, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress The starting address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+ @param Size The size in bytes of the transfer.
+ @param Buffer The pointer to a buffer receiving the data read.
+
+ @return Size
+
+**/
+UINTN
+EFIAPI
+PciSegmentReadBuffer (
+ IN UINT64 StartAddress,
+ IN UINTN Size,
+ OUT VOID *Buffer
+ )
+{
+ UINTN ReturnValue;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+ ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
+
+ if (Size == 0) {
+ return Size;
+ }
+
+ ASSERT (Buffer != NULL);
+
+ // Save Size for return
+ ReturnValue = Size;
+
+ if ((StartAddress & BIT0) != 0) {
+ // Read a byte if StartAddress is byte aligned
+ *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+ StartAddress += sizeof (UINT8);
+ Size -= sizeof (UINT8);
+ Buffer = (UINT8*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+ // Read a word if StartAddress is word aligned
+ WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ while (Size >= sizeof (UINT32)) {
+ // Read as many double words as possible
+ WriteUnaligned32 (Buffer, PciSegmentRead32 (StartAddress));
+ StartAddress += sizeof (UINT32);
+ Size -= sizeof (UINT32);
+ Buffer = (UINT32*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16)) {
+ // Read the last remaining word if exist
+ WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT8)) {
+ // Read the last remaining byte if exist
+ *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+ }
+
+ return ReturnValue;
+}
+
+
+/**
+ Copies the data in a caller supplied buffer to a specified range of PCI
+ configuration space.
+
+ Writes the range of PCI configuration registers specified by StartAddress and
+ Size from the buffer specified by Buffer. This function only allows the PCI
+ configuration registers from a single PCI function to be written. Size is
+ returned. When possible 32-bit PCI configuration write cycles are used to
+ write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ 8-bit and 16-bit PCI configuration write cycles may be used at the beginning
+ and the end of the range.
+
+ If any reserved bits in StartAddress are set, then ASSERT().
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+ If Size > 0 and Buffer is NULL, then ASSERT().
+
+ @param StartAddress The starting address that encodes the PCI Segment, Bus,
+ Device, Function and Register.
+ @param Size The size in bytes of the transfer.
+ @param Buffer The pointer to a buffer containing the data to write.
+
+ @return The parameter of Size.
+
+**/
+UINTN
+EFIAPI
+PciSegmentWriteBuffer (
+ IN UINT64 StartAddress,
+ IN UINTN Size,
+ IN VOID *Buffer
+ )
+{
+ UINTN ReturnValue;
+
+ ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+ ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
+
+ if (Size == 0) {
+ return 0;
+ }
+
+ ASSERT (Buffer != NULL);
+
+ // Save Size for return
+ ReturnValue = Size;
+
+ if ((StartAddress & BIT0) != 0) {
+ // Write a byte if StartAddress is byte aligned
+ PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer);
+ StartAddress += sizeof (UINT8);
+ Size -= sizeof (UINT8);
+ Buffer = (UINT8*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+ // Write a word if StartAddress is word aligned
+ PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ while (Size >= sizeof (UINT32)) {
+ // Write as many double words as possible
+ PciSegmentWrite32 (StartAddress, ReadUnaligned32 (Buffer));
+ StartAddress += sizeof (UINT32);
+ Size -= sizeof (UINT32);
+ Buffer = (UINT32*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT16)) {
+ // Write the last remaining word if exist
+ PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+ StartAddress += sizeof (UINT16);
+ Size -= sizeof (UINT16);
+ Buffer = (UINT16*)Buffer + 1;
+ }
+
+ if (Size >= sizeof (UINT8)) {
+ // Write the last remaining byte if exist
+ PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer);
+ }
+
+ return ReturnValue;
+}
diff --git a/Silicon/ARM/NeoverseN1Soc/Library/PciSegmentLib/PciSegmentLib.inf b/Silicon/ARM/NeoverseN1Soc/Library/PciSegmentLib/PciSegmentLib.inf
new file mode 100644
index 0000000000..fdeb2eb5ad
--- /dev/null
+++ b/Silicon/ARM/NeoverseN1Soc/Library/PciSegmentLib/PciSegmentLib.inf
@@ -0,0 +1,35 @@
+## @file
+# PCI Segment Library for N1Sdp SoC with multiple RCs
+#
+# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2021, ARM Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = PciSegmentLib
+ FILE_GUID = b5ecc9c3-6b30-4f72-8a06-889b4ea8427e
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PciSegmentLib
+
+[Sources]
+ PciSegmentLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ Platform/ARM/N1Sdp/N1SdpPlatform.dec
+ Silicon/ARM/NeoverseN1Soc/NeoverseN1Soc.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ IoLib
+ PciLib
+
+[FixedPcd]
+ gArmNeoverseN1SocTokenSpaceGuid.PcdCcixExpressBaseAddress
+ gArmNeoverseN1SocTokenSpaceGuid.PcdPcieExpressBaseAddress
--
2.17.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#84395): https://edk2.groups.io/g/devel/message/84395
Mute This Topic: https://groups.io/mt/87537278/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list