[edk2-devel] [PATCH v6 9/9] OvmfPkg/SmmControl2Dxe: negotiate CPU hot-unplug

[Laszlo Ersek]

On 01/29/21 01:59, Ankur Arora wrote:
> As part of the negotiation treat ICH9_LPC_SMI_F_CPU_HOT_UNPLUG as a
> subfeature of feature flag ICH9_LPC_SMI_F_CPU_HOTPLUG, so enable it
> only if the other is also being negotiated.
> 
> Cc: Laszlo Ersek <lersek at redhat.com>
> Cc: Jordan Justen <jordan.l.justen at intel.com>
> Cc: Ard Biesheuvel <ard.biesheuvel at arm.com>
> Cc: Igor Mammedov <imammedo at redhat.com>
> Cc: Boris Ostrovsky <boris.ostrovsky at oracle.com>
> Cc: Aaron Young <aaron.young at oracle.com>
> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
> Signed-off-by: Ankur Arora <ankur.a.arora at oracle.com>
> ---
>  OvmfPkg/SmmControl2Dxe/SmiFeatures.c | 25 ++++++++++++++++++++++---
>  1 file changed, 22 insertions(+), 3 deletions(-)
> 
> diff --git a/OvmfPkg/SmmControl2Dxe/SmiFeatures.c b/OvmfPkg/SmmControl2Dxe/SmiFeatures.c
> index c9d875543205..e70f3f8b58cb 100644
> --- a/OvmfPkg/SmmControl2Dxe/SmiFeatures.c
> +++ b/OvmfPkg/SmmControl2Dxe/SmiFeatures.c
> @@ -29,6 +29,13 @@
>  //
>  #define ICH9_LPC_SMI_F_CPU_HOTPLUG BIT1
>  
> +// The following bit value stands for "enable CPU hot unplug, and inject an SMI

(1) s/hot unplug/hot-unplug/


> +// with control value ICH9_APM_CNT_CPU_HOT_UNPLUG upon hot unplug", in the

(2) There is no such thing as ICH9_APM_CNT_CPU_HOT_UNPLUG; we use the
same SMI command value ICH9_APM_CNT_CPU_HOTPLUG (= 4) for unplug.

In QEMU, the macro is called OVMF_CPUHP_SMI_CMD.


(3) s/hot unplug/hot-unplug/.


> +// "etc/smi/supported-features" and "etc/smi/requested-features" fw_cfg files.
> +// Is only negotiated alongside ICH9_LPC_SMI_F_CPU_HOTPLUG.

(4) Please drop the last sentence (see more on it below).


> +//
> +#define ICH9_LPC_SMI_F_CPU_HOT_UNPLUG BIT2
> +
>  //
>  // Provides a scratch buffer (allocated in EfiReservedMemoryType type memory)
>  // for the S3 boot script fragment to write to and read from.
> @@ -112,7 +119,8 @@ NegotiateSmiFeatures (
>    QemuFwCfgReadBytes (sizeof mSmiFeatures, &mSmiFeatures);
>  
>    //
> -  // We want broadcast SMI, SMI on CPU hotplug, and nothing else.
> +  // We want broadcast SMI, SMI on CPU hotplug, on CPU hot-unplug
> +  // and nothing else.
>    //
>    RequestedFeaturesMask = ICH9_LPC_SMI_F_BROADCAST;
>    if (!MemEncryptSevIsEnabled ()) {

(5) Please spell out the full expression "SMI on CPU hot-unplug".


> @@ -120,8 +128,18 @@ NegotiateSmiFeatures (
>      // For now, we only support hotplug with SEV disabled.
>      //
>      RequestedFeaturesMask |= ICH9_LPC_SMI_F_CPU_HOTPLUG;
> +    RequestedFeaturesMask |= ICH9_LPC_SMI_F_CPU_HOT_UNPLUG;
>    }
>    mSmiFeatures &= RequestedFeaturesMask;
> +
> +  if (!(mSmiFeatures & ICH9_LPC_SMI_F_CPU_HOTPLUG) &&
> +      (mSmiFeatures & ICH9_LPC_SMI_F_CPU_HOT_UNPLUG)) {
> +    DEBUG ((DEBUG_WARN, "%a CPU host-features %Lx, requested mask %Lx\n",
> +      __FUNCTION__, mSmiFeatures, RequestedFeaturesMask));
> +
> +    mSmiFeatures &= ~ICH9_LPC_SMI_F_CPU_HOT_UNPLUG;
> +  }
> +
>    QemuFwCfgSelectItem (mRequestedFeaturesItem);
>    QemuFwCfgWriteBytes (sizeof mSmiFeatures, &mSmiFeatures);
>  

(6) Please drop this hunk. We don't try to be smarter than QEMU, in
general, whenever we perform feature negotiation.

For example, the pre-patch code doesn't attempt to notice if QEMU
acknowledges ICH9_LPC_SMI_F_CPU_HOTPLUG but not ICH9_LPC_SMI_F_BROADCAST.


> @@ -162,8 +180,9 @@ NegotiateSmiFeatures (
>    if ((mSmiFeatures & ICH9_LPC_SMI_F_CPU_HOTPLUG) == 0) {
>      DEBUG ((DEBUG_INFO, "%a: CPU hotplug not negotiated\n", __FUNCTION__));
>    } else {
> -    DEBUG ((DEBUG_INFO, "%a: CPU hotplug with SMI negotiated\n",
> -      __FUNCTION__));
> +    DEBUG ((DEBUG_INFO, "%a: CPU hotplug%s with SMI negotiated\n",
> +      __FUNCTION__,
> +      (mSmiFeatures & ICH9_LPC_SMI_F_CPU_HOT_UNPLUG) ? ", unplug" : ""));
>    }
>  
>    //
> 

(7) Rather than combining these two in a common debug message, please
just add a separate "if" that follows the whole pattern seen with
ICH9_LPC_SMI_F_CPU_HOTPLUG. Thus, for each feature bit we care about,
we'll have a dedicated log message, saying yes or no.

Thanks!
Laszlo



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#71025): https://edk2.groups.io/g/devel/message/71025
Mute This Topic: https://groups.io/mt/80199973/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-