[edk2-devel] [PATCH v3 4/4] Platform/RaspberryPi: Invert default Arasan, eMMC2 routing

[jlinton]

From: Jeremy Linton <jeremy.linton at arm.com>

In order for the WiFi to work, and the SD to run at full
speed we need to bind the SD slot to the eMMC2 controller.

Since we now have a driver for the eMMC2 controller
there isn't any reason to leave the SD card bound
to the older Arasan controller.

Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
Reviewed-by: Pete Batard <pete at akeo.ie>
Reviewed-by: Andrei Warkentin <awarkentin at vmware.com>
---
 Platform/RaspberryPi/RPi4/RPi4.dsc  | 2 +-
 Platform/RaspberryPi/RPi4/Readme.md | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Platform/RaspberryPi/RPi4/RPi4.dsc b/Platform/RaspberryPi/RPi4/RPi4.dsc
index 9962df0076..e0fad6f744 100644
--- a/Platform/RaspberryPi/RPi4/RPi4.dsc
+++ b/Platform/RaspberryPi/RPi4/RPi4.dsc
@@ -475,7 +475,7 @@
   # SD-related.
   #
 
-  gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|L"SdIsArasan"|gConfigDxeFormSetGuid|0x0|1
+  gRaspberryPiTokenSpaceGuid.PcdSdIsArasan|L"SdIsArasan"|gConfigDxeFormSetGuid|0x0|0
   gRaspberryPiTokenSpaceGuid.PcdMmcForce1Bit|L"MmcForce1Bit"|gConfigDxeFormSetGuid|0x0|0
   gRaspberryPiTokenSpaceGuid.PcdMmcForceDefaultSpeed|L"MmcForceDefaultSpeed"|gConfigDxeFormSetGuid|0x0|0
   gRaspberryPiTokenSpaceGuid.PcdMmcSdDefaultSpeedMHz|L"MmcSdDefaultSpeedMHz"|gConfigDxeFormSetGuid|0x0|25
diff --git a/Platform/RaspberryPi/RPi4/Readme.md b/Platform/RaspberryPi/RPi4/Readme.md
index 3b2ed44e3c..80899f4ca4 100644
--- a/Platform/RaspberryPi/RPi4/Readme.md
+++ b/Platform/RaspberryPi/RPi4/Readme.md
@@ -181,7 +181,7 @@ Limit RAM to 3 GB            | `RamLimitTo3GB` | Disable = `0x00000000` <br> Ena
 System Table Selection       | `SystemTableMode`| ACPI = `0x00000000` (default)<br> ACPI + Devicetree = `0x00000001` <br> Devicetree = `0x00000002`
 Asset Tag                    | `AssetTag` | String, 32 characters or less (e.g. `L"ABCD123"`)<br> (default `L""`)
 **SD/MMC Configuration**     |
-uSD/eMMC Routing             | `SdIsArasan` | Arasan SDHC = `0x00000001` (default) <br> eMMC2 SDHCI = `0x00000000`
+uSD/eMMC Routing             | `SdIsArasan` | Arasan SDHC = `0x00000001` <br> eMMC2 SDHCI = `0x00000000` (default)
 Multi-Block Support          | `MmcDisableMulti` | Multi-block transfers = `0x00000000` (default)<br> Single block transfers = `0x00000001`
 uSD Max Bus Width            | `MmcForce1Bit` | 4-bit Mode = `0x00000000`  (default)<br> 1-bit Mode = `0x00000001`
 uSD Force Default Speed      | `MmcForceDefaultSpeed` | Allow High Speed = `0x00000000` (default)<br> Force Default Speed = `0x00000001`
-- 
2.13.7



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#71743): https://edk2.groups.io/g/devel/message/71743
Mute This Topic: https://groups.io/mt/80703639/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-