[edk2-devel] [edk2-platforms][PATCH v2 06/32] AmpereAltraPkg: Add DwGpioLib library
Leif Lindholm
leif at nuviainc.com
Fri Jun 4 23:22:21 UTC 2021
On Wed, May 26, 2021 at 17:06:58 +0700, Nhi Pham wrote:
> From: Vu Nguyen <vunguyen at os.amperecomputing.com>
>
> The DwGpioLib library provides basic functions to control the GPIO
> controller on Ampere Altra processor.
>
> Cc: Thang Nguyen <thang at os.amperecomputing.com>
> Cc: Chuong Tran <chuong at os.amperecomputing.com>
> Cc: Phong Vo <phong at os.amperecomputing.com>
> Cc: Leif Lindholm <leif at nuviainc.com>
> Cc: Michael D Kinney <michael.d.kinney at intel.com>
> Cc: Ard Biesheuvel <ardb+tianocore at kernel.org>
> Cc: Nate DeSimone <nathaniel.l.desimone at intel.com>
>
> Signed-off-by: Vu Nguyen <vunguyen at os.amperecomputing.com>
Reviewed-by: Leif Lindholm <leif at nuviainc.com>
/
Leif
> ---
> Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec | 3 +
> Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf | 33 ++
> Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h | 76 +++++
> Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c | 314 ++++++++++++++++++++
> 4 files changed, 426 insertions(+)
>
> diff --git a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec b/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
> index 8be6a329bb26..be827dd19a96 100644
> --- a/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
> +++ b/Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
> @@ -31,6 +31,9 @@ [LibraryClasses]
> ## @libraryclass Defines a set of methods to read/write to I2C devices.
> I2cLib|Silicon/Ampere/AmpereAltraPkg/Include/Library/I2cLib.h
>
> + ## @libraryclass Defines a set of methods to get/set GPIO.
> + GpioLib|Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
> +
> ## @libraryclass Defines a set of methods to communicate with secure parition over MM interface.
> MmCommunicationLib|Silicon/Ampere/AmpereAltraPkg/Include/Library/MmCommunicationLib.h
>
> diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf
> new file mode 100644
> index 000000000000..36ce0c3be2c8
> --- /dev/null
> +++ b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.inf
> @@ -0,0 +1,33 @@
> +## @file
> +# Component description for DwGpioLib library for the Designware GPIO controller.
> +#
> +# Copyright (c) 2020 - 2021, Ampere Computing LLC. All rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = DwGpioLib
> + FILE_GUID = E7D9CAE1-6930-46E3-BDF9-0027446E7DF2
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = GpioLib
> +
> +[Sources.common]
> + DwGpioLib.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + ArmPlatformPkg/ArmPlatformPkg.dec
> + MdePkg/MdePkg.dec
> + Silicon/Ampere/AmpereAltraPkg/AmpereAltraPkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + BaseMemoryLib
> + IoLib
> +
> +[Guids]
> + gEfiEventVirtualAddressChangeGuid
> diff --git a/Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h b/Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
> new file mode 100755
> index 000000000000..cb201bc98322
> --- /dev/null
> +++ b/Silicon/Ampere/AmpereAltraPkg/Include/Library/GpioLib.h
> @@ -0,0 +1,76 @@
> +/** @file
> + Library implementation for the Designware GPIO controller.
> +
> + Copyright (c) 2020 - 2021, Ampere Computing LLC. All rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#ifndef GPIO_LIB_H_
> +#define GPIO_LIB_H_
> +
> +enum SocGpioConfigMode {
> + GPIO_CONFIG_OUT_LOW = 0,
> + GPIO_CONFIG_OUT_HI,
> + GPIO_CONFIG_OUT_LOW_TO_HIGH,
> + GPIO_CONFIG_OUT_HIGH_TO_LOW,
> + GPIO_CONFIG_IN,
> + MAX_GPIO_CONFIG_MODE
> +};
> +
> +/*
> + * GpioWriteBit: Use to Set/Clear GPIOs
> + * Input:
> + * Pin : Pin Identification
> + * Val : 1 to Set, 0 to Clear
> + */
> +VOID
> +EFIAPI
> +GpioWriteBit (
> + IN UINT32 Pin,
> + IN UINT32 Val
> + );
> +
> +/*
> + * GpioReadBit:
> + * Input:
> + * Pin : Pin Identification
> + * Return:
> + * 1 : On/High
> + * 0 : Off/Low
> + */
> +UINTN
> +EFIAPI
> +GpioReadBit (
> + IN UINT32 Pin
> + );
> +
> +/*
> + * GpioModeConfig: Use to configure GPIOs as Input/Output
> + * Input:
> + * Pin : Pin Identification
> + * InOut : GPIO_OUT/1 as Output
> + * GPIO_IN/0 as Input
> + */
> +EFI_STATUS
> +EFIAPI
> +GpioModeConfig (
> + UINT8 Pin,
> + UINTN Mode
> + );
> +
> +/*
> + * Setup a controller that to be used in runtime service.
> + * Input:
> + * Pin: Pin belongs to the controller.
> + * return: 0 for success.
> + * Otherwise, error code.
> + */
> +EFI_STATUS
> +EFIAPI
> +GpioSetupRuntime (
> + IN UINT32 Pin
> + );
> +
> +#endif /* GPIO_LIB_H_ */
> diff --git a/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c
> new file mode 100644
> index 000000000000..dbb53f7d57d2
> --- /dev/null
> +++ b/Silicon/Ampere/AmpereAltraPkg/Library/DwGpioLib/DwGpioLib.c
> @@ -0,0 +1,314 @@
> +/** @file
> +
> + Copyright (c) 2020 - 2021, Ampere Computing LLC. All rights reserved.<BR>
> +
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#include <PiDxe.h>
> +#include <Uefi.h>
> +
> +#include <Library/DebugLib.h>
> +#include <Library/GpioLib.h>
> +#include <Library/DxeServicesTableLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/TimerLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/UefiRuntimeLib.h>
> +#include <Platform/Ac01.h>
> +
> +/* Runtime needs to be 64K alignment */
> +#define RUNTIME_ADDRESS_MASK (~(SIZE_64KB - 1))
> +#define RUNTIME_ADDRESS_LENGTH SIZE_64KB
> +
> +#define GPIO_MUX_VAL(Gpio) (0x00000001 << (Gpio))
> +#define GPIO_IN 0
> +#define GPIO_OUT 1
> +
> +/* Address GPIO_REG Registers */
> +#define GPIO_SWPORTA_DR_ADDR 0x00000000
> +#define GPIO_SWPORTA_DDR_ADDR 0x00000004
> +#define GPIO_EXT_PORTA_ADDR 0x00000050
> +
> +STATIC UINT64 GpioBaseAddr[] = { GPIO_DWAPB_BASE_ADDR };
> +STATIC UINT64 GpiBaseAddr[] = { GPI_DWAPB_BASE_ADDR };
> +STATIC BOOLEAN GpioRuntimeEnableArray[sizeof (GpioBaseAddr) / sizeof (GpioBaseAddr[0])] = { FALSE };
> +STATIC EFI_EVENT mVirtualAddressChangeEvent = NULL;
> +
> +UINT64
> +GetBaseAddr (
> + IN UINT32 Pin
> + )
> +{
> + UINT32 NumberOfControllers = sizeof (GpioBaseAddr) / sizeof (GpioBaseAddr[0]);
> + UINT32 TotalPins = GPIO_DWAPB_PINS_PER_CONTROLLER * NumberOfControllers;
> +
> + if (NumberOfControllers == 0 || Pin >= TotalPins) {
> + return 0;
> + }
> +
> + return GpioBaseAddr[Pin / GPIO_DWAPB_PINS_PER_CONTROLLER];
> +}
> +
> +VOID
> +GpioWrite (
> + IN UINT64 Base,
> + IN UINT32 Val
> + )
> +{
> + MmioWrite32 ((UINTN)Base, Val);
> +}
> +
> +VOID
> +GpioRead (
> + IN UINT64 Base,
> + OUT UINT32 *Val
> + )
> +{
> + ASSERT (Val != NULL);
> + *Val = MmioRead32 (Base);
> +}
> +
> +VOID
> +EFIAPI
> +GpioWriteBit (
> + IN UINT32 Pin,
> + IN UINT32 Val
> + )
> +{
> + UINT64 Reg;
> + UINT32 GpioPin;
> + UINT32 ReadVal;
> +
> + Reg = GetBaseAddr (Pin);
> + if (Reg == 0) {
> + return;
> + }
> +
> + GpioPin = Pin % GPIO_DWAPB_PINS_PER_CONTROLLER;
> +
> + Reg += GPIO_SWPORTA_DR_ADDR;
> + GpioRead (Reg, &ReadVal);
> +
> + if (Val != 0) {
> + GpioWrite (Reg, ReadVal | GPIO_MUX_VAL (GpioPin));
> + } else {
> + GpioWrite (Reg, ReadVal & ~GPIO_MUX_VAL (GpioPin));
> + }
> +}
> +
> +UINTN
> +EFIAPI
> +GpioReadBit (
> + IN UINT32 Pin
> + )
> +{
> + UINT64 Reg;
> + UINT32 Val;
> + UINT32 GpioPin;
> + UINT8 Index;
> + UINT32 MaxIndex;
> +
> + Reg = GetBaseAddr (Pin);
> + if (Reg == 0) {
> + return 0;
> + }
> +
> + GpioPin = Pin % GPIO_DWAPB_PINS_PER_CONTROLLER;
> +
> + /* Check if a base address is GPI */
> + MaxIndex = sizeof (GpiBaseAddr) / sizeof (GpiBaseAddr[0]);
> + for (Index = 0; Index < MaxIndex; Index++) {
> + if (Reg == GpiBaseAddr[Index]) {
> + break;
> + }
> + }
> + if (Index == MaxIndex) {
> + /* Only GPIO has GPIO_EXT_PORTA register, not for GPI */
> + Reg += GPIO_EXT_PORTA_ADDR;
> + }
> +
> + GpioRead (Reg, &Val);
> +
> + return Val & GPIO_MUX_VAL (GpioPin) ? 1 : 0;
> +}
> +
> +EFI_STATUS
> +GpioConfig (
> + IN UINT32 Pin,
> + IN UINT32 InOut
> + )
> +{
> + INTN GpioPin;
> + UINT32 Val;
> + UINT64 Reg;
> +
> + /*
> + * Caculate GPIO Pin Number for Direction Register
> + * GPIO_SWPORTA_DDR for GPIO[31...0]
> + * GPIO_SWPORTB_DDR for GPIO[51...32]
> + */
> +
> + Reg = GetBaseAddr (Pin);
> + if (Reg == 0) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + Reg += GPIO_SWPORTA_DDR_ADDR;
> + GpioPin = Pin % GPIO_DWAPB_PINS_PER_CONTROLLER;
> + GpioRead (Reg, &Val);
> +
> + if (InOut == GPIO_OUT) {
> + Val |= GPIO_MUX_VAL (GpioPin);
> + } else {
> + Val &= ~GPIO_MUX_VAL (GpioPin);
> + }
> + GpioWrite (Reg, Val);
> +
> + return EFI_SUCCESS;
> +}
> +
> +EFI_STATUS
> +EFIAPI
> +GpioModeConfig (
> + UINT8 Pin,
> + UINTN Mode
> + )
> +{
> + UINT32 NumberOfControllers = sizeof (GpioBaseAddr) / sizeof (UINT64);
> + UINT32 NumersOfPins = NumberOfControllers * GPIO_DWAPB_PINS_PER_CONTROLLER;
> + UINT32 Delay = 10;
> +
> + if (Mode < GPIO_CONFIG_OUT_LOW
> + || Mode >= MAX_GPIO_CONFIG_MODE
> + || Pin > NumersOfPins - 1
> + || Pin < 0)
> + {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + switch (Mode) {
> + case GPIO_CONFIG_OUT_LOW:
> + GpioConfig (Pin, GPIO_OUT);
> + GpioWriteBit (Pin, 0);
> + DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output low\n", Pin));
> + break;
> +
> + case GPIO_CONFIG_OUT_HI:
> + GpioConfig (Pin, GPIO_OUT);
> + GpioWriteBit (Pin, 1);
> + DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output high\n", Pin));
> + break;
> +
> + case GPIO_CONFIG_OUT_LOW_TO_HIGH:
> + GpioConfig (Pin, GPIO_OUT);
> + GpioWriteBit (Pin, 0);
> + MicroSecondDelay (1000 * Delay);
> + GpioWriteBit (Pin, 1);
> + DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output low->high\n", Pin));
> + break;
> +
> + case GPIO_CONFIG_OUT_HIGH_TO_LOW:
> + GpioConfig (Pin, GPIO_OUT);
> + GpioWriteBit (Pin, 1);
> + MicroSecondDelay (1000 * Delay);
> + GpioWriteBit (Pin, 0);
> + DEBUG ((DEBUG_INFO, "GPIO pin %d configured as output high->low\n", Pin));
> + break;
> +
> + case GPIO_CONFIG_IN:
> + GpioConfig (Pin, GPIO_IN);
> + DEBUG ((DEBUG_INFO, "GPIO pin %d configured as input\n", Pin));
> + break;
> +
> + default:
> + break;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + * Notification function of EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE.
> + *
> + * This is a notification function registered on EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.
> + * It convers pointer to new virtual address.
> + *
> + * @param Event Event whose notification function is being invoked.
> + * @param Context Pointer to the notification function's context.
> + */
> +VOID
> +EFIAPI
> +GpioVirtualAddressChangeEvent (
> + IN EFI_EVENT Event,
> + IN VOID *Context
> + )
> +{
> + UINTN Count;
> +
> + EfiConvertPointer (0x0, (VOID **)&GpioBaseAddr);
> + for (Count = 0; Count < sizeof (GpioBaseAddr) / sizeof (GpioBaseAddr[0]); Count++) {
> + if (!GpioRuntimeEnableArray[Count]) {
> + continue;
> + }
> + EfiConvertPointer (0x0, (VOID **)&GpioBaseAddr[Count]);
> + }
> +}
> +
> +/**
> + Setup a controller that to be used in runtime service.
> +
> + @Bus: Bus ID.
> + @return: 0 for success.
> + Otherwise, error code.
> + **/
> +EFI_STATUS
> +EFIAPI
> +GpioSetupRuntime (
> + IN UINT32 Pin
> + )
> +{
> + EFI_STATUS Status;
> + EFI_GCD_MEMORY_SPACE_DESCRIPTOR Descriptor;
> +
> + if (GetBaseAddr (Pin) == 0) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if (mVirtualAddressChangeEvent == NULL) {
> + /*
> + * Register for the virtual address change event
> + */
> + Status = gBS->CreateEventEx (
> + EVT_NOTIFY_SIGNAL,
> + TPL_NOTIFY,
> + GpioVirtualAddressChangeEvent,
> + NULL,
> + &gEfiEventVirtualAddressChangeGuid,
> + &mVirtualAddressChangeEvent
> + );
> + ASSERT_EFI_ERROR (Status);
> + }
> +
> + Status = gDS->GetMemorySpaceDescriptor (
> + GetBaseAddr (Pin) & RUNTIME_ADDRESS_MASK,
> + &Descriptor
> + );
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + Status = gDS->SetMemorySpaceAttributes (
> + GetBaseAddr (Pin) & RUNTIME_ADDRESS_MASK,
> + RUNTIME_ADDRESS_LENGTH,
> + Descriptor.Attributes | EFI_MEMORY_RUNTIME
> + );
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + GpioRuntimeEnableArray[Pin / GPIO_DWAPB_PINS_PER_CONTROLLER] = TRUE;
> +
> + return Status;
> +}
> --
> 2.17.1
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#76087): https://edk2.groups.io/g/devel/message/76087
Mute This Topic: https://groups.io/mt/83097100/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list