[edk2-devel] [PATCH edk2-platforms v2 1/4] SbsaQemu: Build infrastructure for StandaloneMm image
Masahisa Kojima
masahisa.kojima at linaro.org
Tue Mar 2 12:45:26 UTC 2021
Hi Leif,
Thank you for you comments.
On Tue, 2 Mar 2021 at 02:05, Leif Lindholm <leif at nuviainc.com> wrote:
>
> On Mon, Mar 01, 2021 at 14:19:49 +0900, Masahisa Kojima wrote:
> > Add the build infrastructure for compilation of StandaloneMm image.
> >
> > Signed-off-by: Masahisa Kojima <masahisa.kojima at linaro.org>
> > ---
> > .../Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc | 132 ++++++++++++++++++
>
> Please use --stat=1000 --stat-graph-width=20 when generating patches.
Sorry I forgot to add these options, will be included in the next version.
>
> > Platform/Qemu/SbsaQemu/SbsaQemu.fdf | 6 +-
>
> It is not immediately obvious to me why the pre-existing
> SbsaQemuStandaloneMm.dsc needs to change. Is this something that can
> be clarified in commit message?
I probably does not understand your comment correctly, but
SbsaQemuStandaloneMm.dsc
is newly created file with this commit.
Thanks,
Masahisa
>
> Best Regards,
>
> Leif
>
> > .../Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf | 93 ++++++++++++
> > 3 files changed, 228 insertions(+), 3 deletions(-)
> > create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> > create mode 100644 Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> >
> > diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> > new file mode 100644
> > index 000000000000..87f5ee351eaa
> > --- /dev/null
> > +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.dsc
> > @@ -0,0 +1,132 @@
> > +#
> > +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +
> > +################################################################################
> > +#
> > +# Defines Section - statements that will be processed to create a Makefile.
> > +#
> > +################################################################################
> > +[Defines]
> > + PLATFORM_NAME = SbsaQemuStandaloneMm
> > + PLATFORM_GUID = A64CC0F5-7ACD-4975-BBE7-7EF6739C8668
> > + PLATFORM_VERSION = 1.0
> > + DSC_SPECIFICATION = 0x00010011
> > + OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)
> > + SUPPORTED_ARCHITECTURES = AARCH64
> > + BUILD_TARGETS = DEBUG|RELEASE|NOOPT
> > + SKUID_IDENTIFIER = DEFAULT
> > + FLASH_DEFINITION = Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > + DEFINE DEBUG_MESSAGE = TRUE
> > +
> > + # LzmaF86
> > + DEFINE COMPRESSION_TOOL_GUID = D42AE6BD-1352-4bfb-909A-CA72A6EAE889
> > +
> > +################################################################################
> > +#
> > +# Library Class section - list of all Library Classes needed by this Platform.
> > +#
> > +################################################################################
> > +[LibraryClasses]
> > + #
> > + # Basic
> > + #
> > + BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
> > + BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
> > + DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
> > + DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
> > + ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
> > + FvLib|StandaloneMmPkg/Library/FvLib/FvLib.inf
> > + HobLib|StandaloneMmPkg/Library/StandaloneMmCoreHobLib/StandaloneMmCoreHobLib.inf
> > + IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> > + MemLib|StandaloneMmPkg/Library/StandaloneMmMemLib/StandaloneMmMemLib.inf
> > + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmCoreMemoryAllocationLib/StandaloneMmCoreMemoryAllocationLib.inf
> > + PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> > + PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> > + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
> > + ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
> > +
> > + #
> > + # Entry point
> > + #
> > + StandaloneMmDriverEntryPoint|MdePkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
> > +
> > + ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
> > + StandaloneMmMmuLib|ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf
> > + ArmSvcLib|ArmPkg/Library/ArmSvcLib/ArmSvcLib.inf
> > + CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
> > + PeCoffExtraActionLib|StandaloneMmPkg/Library/StandaloneMmPeCoffExtraActionLib/StandaloneMmPeCoffExtraActionLib.inf
> > +
> > + # ARM PL011 UART Driver
> > + PL011UartClockLib|ArmPlatformPkg/Library/PL011UartClockLib/PL011UartClockLib.inf
> > + PL011UartLib|ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.inf
> > + SerialPortLib|ArmPlatformPkg/Library/PL011SerialPortLib/PL011SerialPortLib.inf
> > +
> > + StandaloneMmCoreEntryPoint|StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
> > +
> > + #
> > + # It is not possible to prevent the ARM compiler for generic intrinsic functions.
> > + # This library provides the instrinsic functions generate by a given compiler.
> > + # And NULL mean link this library into all ARM images.
> > + #
> > + NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
> > +
> > +[LibraryClasses.common.MM_STANDALONE]
> > + HobLib|StandaloneMmPkg/Library/StandaloneMmHobLib/StandaloneMmHobLib.inf
> > + MmServicesTableLib|MdePkg/Library/StandaloneMmServicesTableLib/StandaloneMmServicesTableLib.inf
> > + MemoryAllocationLib|StandaloneMmPkg/Library/StandaloneMmMemoryAllocationLib/StandaloneMmMemoryAllocationLib.inf
> > +
> > +################################################################################
> > +#
> > +# Pcd Section - list of all EDK II PCD Entries defined by this Platform
> > +#
> > +################################################################################
> > +[PcdsFixedAtBuild]
> > + gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800000CF
> > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xff
> > + gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x0f
> > +
> > + ## PL011 - Serial Terminal
> > + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x60040000
> > + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
> > +
> > + gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x2
> > +
> > +###################################################################################################
> > +#
> > +# Components Section - list of the modules and components that will be processed by compilation
> > +# tools and the EDK II tools to generate PE32/PE32+/Coff image files.
> > +#
> > +# Note: The EDK II DSC file is not used to specify how compiled binary images get placed
> > +# into firmware volume images. This section is just a list of modules to compile from
> > +# source into UEFI-compliant binaries.
> > +# It is the FDF file that contains information on combining binary files into firmware
> > +# volume images, whose concept is beyond UEFI and is described in PI specification.
> > +# Binary modules do not need to be listed in this section, as they should be
> > +# specified in the FDF file. For example: Shell binary (Shell_Full.efi), FAT binary (Fat.efi),
> > +# Logo (Logo.bmp), and etc.
> > +# There may also be modules listed in this section that are not required in the FDF file,
> > +# When a module listed here is excluded from FDF file, then UEFI-compliant binary will be
> > +# generated for it, but the binary will not be put into any firmware volume.
> > +#
> > +###################################################################################################
> > +[Components.common]
> > + #
> > + # MM Core
> > + #
> > + StandaloneMmPkg/Core/StandaloneMmCore.inf
> > + StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> > +
> > +###################################################################################################
> > +#
> > +# BuildOptions Section - Define the module specific tool chain flags that should be used as
> > +# the default flags for a module. These flags are appended to any
> > +# standard flags that are defined by the build process. They can be
> > +# applied for any modules or only those modules with the specific
> > +# module style (EDK or EDKII) specified in [Components] section.
> > +#
> > +###################################################################################################
> > +[BuildOptions.AARCH64]
> > + GCC:*_*_*_DLINK_FLAGS = -z common-page-size=0x1000 -march=armv8-a+nofp
> > diff --git a/Platform/Qemu/SbsaQemu/SbsaQemu.fdf b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
> > index c35e3ed44054..b61ae1891233 100644
> > --- a/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
> > +++ b/Platform/Qemu/SbsaQemu/SbsaQemu.fdf
> > @@ -21,10 +21,10 @@
> >
> > [FD.SBSA_FLASH0]
> > BaseAddress = 0x00000000
> > -Size = 0x00200000
> > +Size = 0x00400000
> > ErasePolarity = 1
> > BlockSize = 0x00001000
> > -NumBlocks = 0x200
> > +NumBlocks = 0x400
> >
> > ################################################################################
> > #
> > @@ -47,7 +47,7 @@ [FD.SBSA_FLASH0]
> > FILE = Platform/Qemu/Sbsa/bl1.bin
> >
> > # and FIP (BL2 + BL31)
> > -0x00008000|0x00020000
> > +0x00008000|0x00300000
> > FILE = Platform/Qemu/Sbsa/fip.bin
> >
> > ################################################################################
> > diff --git a/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > new file mode 100644
> > index 000000000000..a1acefcfb0a7
> > --- /dev/null
> > +++ b/Platform/Qemu/SbsaQemu/SbsaQemuStandaloneMm.fdf
> > @@ -0,0 +1,93 @@
> > +#
> > +# Copyright (c) 2020, Linaro Limited. All rights reserved.
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause-Patent
> > +#
> > +
> > +################################################################################
> > +#
> > +# FD Section
> > +# The [FD] Section is made up of the definition statements and a
> > +# description of what goes into the Flash Device Image. Each FD section
> > +# defines one flash "device" image. A flash device image may be one of
> > +# the following: Removable media bootable image (like a boot floppy
> > +# image,) an Option ROM image (that would be "flashed" into an add-in
> > +# card,) a System "Flash" image (that would be burned into a system's
> > +# flash) or an Update ("Capsule") image that will be used to update and
> > +# existing system flash.
> > +#
> > +################################################################################
> > +
> > +[FD.STANDALONE_MM]
> > +BaseAddress = 0x20001000|gArmTokenSpaceGuid.PcdFdBaseAddress
> > +Size = 0x00e00000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the device (14MiB).
> > +ErasePolarity = 1
> > +
> > +BlockSize = 0x00001000
> > +NumBlocks = 0x0e00
> > +
> > +0x00000000|0x00280000
> > +gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
> > +FV = FVMAIN_COMPACT
> > +
> > +[FV.FVMAIN_COMPACT]
> > +FvAlignment = 16
> > +ERASE_POLARITY = 1
> > +MEMORY_MAPPED = TRUE
> > +STICKY_WRITE = TRUE
> > +LOCK_CAP = TRUE
> > +LOCK_STATUS = TRUE
> > +WRITE_DISABLED_CAP = TRUE
> > +WRITE_ENABLED_CAP = TRUE
> > +WRITE_STATUS = TRUE
> > +WRITE_LOCK_CAP = TRUE
> > +WRITE_LOCK_STATUS = TRUE
> > +READ_DISABLED_CAP = TRUE
> > +READ_ENABLED_CAP = TRUE
> > +READ_STATUS = TRUE
> > +READ_LOCK_CAP = TRUE
> > +READ_LOCK_STATUS = TRUE
> > +
> > + INF StandaloneMmPkg/Core/StandaloneMmCore.inf
> > + INF StandaloneMmPkg/Drivers/StandaloneMmCpu/AArch64/StandaloneMmCpu.inf
> > +
> > +################################################################################
> > +#
> > +# Rules are use with the [FV] section's module INF type to define
> > +# how an FFS file is created for a given INF file. The following Rule are the default
> > +# rules for the different module type. User can add the customized rules to define the
> > +# content of the FFS file.
> > +#
> > +################################################################################
> > +
> > +
> > +############################################################################
> > +# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
> > +############################################################################
> > +#
> > +#[Rule.Common.DXE_DRIVER]
> > +# FILE DRIVER = $(NAMED_GUID) {
> > +# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> > +# COMPRESS PI_STD {
> > +# GUIDED {
> > +# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > +# UI STRING="$(MODULE_NAME)" Optional
> > +# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> > +# }
> > +# }
> > +# }
> > +#
> > +############################################################################
> > +
> > +[Rule.Common.MM_CORE_STANDALONE]
> > + FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
> > + PE32 PE32 Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
> > + }
> > +
> > +[Rule.Common.MM_STANDALONE]
> > + FILE MM_STANDALONE = $(NAMED_GUID) {
> > + SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
> > + PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
> > + UI STRING="$(MODULE_NAME)" Optional
> > + VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
> > + }
> > --
> > 2.17.1
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#72332): https://edk2.groups.io/g/devel/message/72332
Mute This Topic: https://groups.io/mt/80990864/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list