[edk2-devel] RFC: Add BaseLib/QuickSort in MdePkg
Brian J. Johnson
brian.johnson at hpe.com
Tue Sep 28 22:25:40 UTC 2021
I'll add my agreement to Marvin and Jeff: a low-level sort routine like
this should let the caller be in charge of memory allocation, so it can
be used in the widest variety of contexts (SEC, exception handlers, APs,
etc.) So let's make the BufferOneElement parameter mandatory.
Brian J. Johnson
-------- Original Message --------
From: Ni, Ray [mailto:ray.ni at intel.com]
Sent: Monday, September 27, 2021, 8:49 PM
To: Marvin Häuser <mhaeuser at posteo.de>, fanjianfeng at byosoft.com.cn
<fanjianfeng at byosoft.com.cn>, devel at edk2.groups.io
<devel at edk2.groups.io>, 'gaoliming' <gaoliming at byosoft.com.cn>, Chan,
Amy <amy.chan at intel.com>, 'Andrew Fish' <afish at apple.com>
Cc: Kinney, Michael D <michael.d.kinney at intel.com>, 'Gao, Liming'
<liming.gao at intel.com>, Liu, Zhiguang <zhiguang.liu at intel.com>, Wang,
Jian J <jian.j.wang at intel.com>, Gao, Zhichao <zhichao.gao at intel.com>
Subject: [edk2-devel] RFC: Add BaseLib/QuickSort in MdePkg
Marvin,
I agree with your concerns, in a certain level. But I didn't treat it
as a very big problem of having caller pass the BufferOneElement
"intelligently".
I am ok to use your option 1), making BufferOneElement mandatory.
Caller should always supply the buffer that's sufficient to hold one
element.
By the way, I don't want to propose "swap-without-using-temporary-value"
method to avoid using the "BufferOneElement"?
Because that makes the simple thing complicated!
Thanks,
Ray
> -----Original Message-----
> From: Marvin Häuser <mhaeuser at posteo.de>
> Sent: Monday, September 27, 2021 5:09 PM
> To: fanjianfeng at byosoft.com.cn; devel at edk2.groups.io; Ni, Ray <ray.ni at intel.com>; 'gaoliming'
> <gaoliming at byosoft.com.cn>; Chan, Amy <amy.chan at intel.com>; 'Andrew Fish' <afish at apple.com>
> Cc: Kinney, Michael D <michael.d.kinney at intel.com>; 'Gao, Liming' <liming.gao at intel.com>; Liu, Zhiguang
> <zhiguang.liu at intel.com>; Wang, Jian J <jian.j.wang at intel.com>; Gao, Zhichao <zhichao.gao at intel.com>
> Subject: Re: [edk2-devel] RFC: Add BaseLib/QuickSort in MdePkg
>
> On 27/09/2021 10:50, fanjianfeng at byosoft.com.cn wrote:
>> For former caller, they could still keep as is to call the old API in
>> MdeModulePkg. I think Ray's design is compatible change for existing code.
>> Only when the existing code wants to remove the dependency on
>> MdeModuelPkg, they could migrate to the new API in baselib.
>>
>> I agree with one split-API desgin what you mentioned.
>> But my point is to define one API in baselib and to make the baselib
>> not depend on memory allocation. And another wrapper API could be
>> designed to be placed in any other class.
>
> Oh sure, it could totally live in another class. I'd just like to have
> those two models (caller- and callee-owned buffer) strictly separate, I
> personally do not mind where exactly they are implemented. Thanks!
>
> Best regards,
> Marvin
>
>>
>> ------------------------------------------------------------------------
>> Jeff
>> fanjianfeng at byosoft.com.cn
>>
>> *From:* Marvin Häuser <mailto:mhaeuser at posteo.de>
>> *Date:* 2021-09-27 16:14
>> *To:* fanjianfeng at byosoft.com.cn
>> <mailto:fanjianfeng at byosoft.com.cn>; devel at edk2.groups.io
>> <mailto:devel at edk2.groups.io>; Ni, Ray <mailto:ray.ni at intel.com>;
>> 'gaoliming' <mailto:gaoliming at byosoft.com.cn>; Chan, Amy
>> <mailto:amy.chan at intel.com>; 'Andrew Fish' <mailto:afish at apple.com>
>> *CC:* Kinney, Michael D <mailto:michael.d.kinney at intel.com>; 'Gao,
>> Liming' <mailto:liming.gao at intel.com>; Liu, Zhiguang
>> <mailto:zhiguang.liu at intel.com>; Wang, Jian J
>> <mailto:jian.j.wang at intel.com>; Gao, Zhichao
>> <mailto:zhichao.gao at intel.com>
>> *Subject:* Re: [edk2-devel] RFC: Add BaseLib/QuickSort in MdePkg
>> On 27/09/2021 02:45, fanjianfeng at byosoft.com.cn wrote:
>> > Making baselib implementation depend on MemoryAllocationLib
>> > (indirectly on Pei Service and gBS), it may prevent
>> > this base API using at some seneraio. i don't think it's better.
>> That is why I asked about a split-API scenario, one of which does not
>> depend on dynamic memory allocation (SetVariable-like) and one does
>> (wrapper-like).
>> > Add this parameter and make this parameter is optional,
>> > 1, when NULL, use the local 256 bytes stack
>> > 2, if 256 bytes stack is not enough, return RETURE_BUFFER_TOO_SAMLL,
>> > 3, caller check the return status, to do nothing or to allocate
>> enough
>> > buffer for retry
>> >
>> > This is just like SetVariable()'s implementation.
>> Yes, and because that is SetVariable's implementation, we have
>> library
>> functions to make it less error-prone and more convenient [1]. As a
>> matter of fact, we have a (semi-lax) policy in our codebases to avoid
>> such functions like the plague and use those library wrappers
>> where-ever
>> it can make sense. The only super-rare exceptions I can think of are
>> when we know the size of the element ahead of time. Also
>> SetVariable has
>> no arbitrary constraint on when it may work the first time, and
>> there is
>> code that will fail when the first return is not EFI_BUFFER_TOO_SMALL.
>> This solution honestly yields even more problems, because it
>> introduces
>> a Status return which was not there before. For common code safety
>> and
>> quality policy, this requires the value *must* be retrieved and
>> checked
>> in some fashion. So all callers, no matter the prior knowledge of the
>> element size, now need either a runtime check and handling for a
>> status
>> that they (may) know can never be returned, or ASSERTs if the
>> function
>> spec really imposes the arbitrary 256 Bytes constraint. Latter
>> doesn't
>> really work I think. What if someone wants to sort in SEC and noticed
>> they only have 64 Bytes on the stack to work with, realistically? Any
>> code depending on the 256 Byte constraint, passing NULL and not doing
>> additional handling, would seize to work. Former is too
>> complicated, see
>> wrappers. In my opinion, the memory must *either* be fully managed by
>> the caller *or* the callee (and you may have both in separate
>> functions,
>> as I suggested), but not sometimes here, sometimes there.
>> Best regards,
>> Marvin
>> [1]
>>
> https://github.com/tianocore/edk2/blob/46b4606ba23498d3d0e66b53e498eb3d5d592586/MdePkg/Library/UefiLib/UefiLib.c#L
> 1309-L1360
>> >
>> >
>> ------------------------------------------------------------------------
>> > Jeff
>> > fanjianfeng at byosoft.com.cn
>> >
>> > *From:* Marvin Häuser <mailto:mhaeuser at posteo.de>
>> > *Date:* 2021-09-26 19:20
>> > *To:* devel <mailto:devel at edk2.groups.io>; ray.ni
>> > <mailto:ray.ni at intel.com>; gaoliming
>> > <mailto:gaoliming at byosoft.com.cn>; Chan, Amy
>> > <mailto:amy.chan at intel.com>; 'Andrew Fish'
>> <mailto:afish at apple.com>
>> > *CC:* Kinney, Michael D <mailto:michael.d.kinney at intel.com>;
>> 'Gao,
>> > Liming' <mailto:liming.gao at intel.com>; Liu, Zhiguang
>> > <mailto:zhiguang.liu at intel.com>; Wang, Jian J
>> > <mailto:jian.j.wang at intel.com>; Gao, Zhichao
>> > <mailto:zhichao.gao at intel.com>
>> > *Subject:* Re: [edk2-devel] RFC: Add BaseLib/QuickSort in MdePkg
>> > Hey Ray,
>> > In my opinion that spec is too complicated. For some cases it is
>> > obvious, but I think the last anyone wants to see is a
>> > (STATIC_)ASSERT
>> > before most QuickSort calls to ensure the element size
>> *really* is <=
>> > 256 Bytes. In my opinion, there are two roads:
>> > 1) Make the parameter required (I think this is what Liming
>> > suggested).
>> > The caller would always need to provide said buffer, and it
>> can do
>> > as it
>> > sees fit - on the stack, in a pool, in a page, who knows.
>> > 2) Remove the parameter entirely. The library would depend on
>> > MemoryAllocationLib again, but also would have an
>> optimisation by
>> > choosing stack vs pool based on ElementSize.
>> > Usually I would prefer 2), as it is less prone to caller
>> errors, but
>> > considering the low-level nature of edk2, I can totally see the
>> > point to
>> > allow the caller to control whether there are dynamic memory
>> > allocations
>> > made or not as possible with 1). 2) could technically also be a
>> > wrapper
>> > for 1) if you want granular control and convenience/safety
>> (why not
>> > actually?).
>> > Both approaches have the advantage that it is crystal-clear
>> what the
>> > caller's job is - to always or to never allocate the buffer.
>> > Best regards,
>> > Marvin
>> > On 26/09/2021 04:24, Ni, Ray wrote:
>> > >
>> > > Liming,
>> > >
>> > > The purpose of the optional BufferOneElement is to ease
>> consumer’s
>> > > life assuming most of the time the element size should be
>> > smaller than
>> > > 256.
>> > >
>> > > Are you saying that it’s a bit hard to calculate the actual
>> > value of
>> > > sizeof (Element) when writing code?
>> > >
>> > > I recommend consumer always allocates memory if it’s hard
>> to judge
>> > > sizeof (Element) < 256.
>> > >
>> > > Searching edk2 code, I can find below code using
>> PerformQuickSort():
>> > >
>> > > 1. ShellPkg/UefiShellCommandLib: It’s sorting array of
>> > > (EFI_DEVICE_PATH_PROTOCOL *).
>> > > 2. UefiCpuPkg/CpuCacheInfoLib: It’s sorting array of
>> > CPU_CACHE_INFO.
>> > > 3. MinPlatformPkg/AcpiTables: It’s sorting array of
>> > EFI_CPU_ID_ORDER_MAP.
>> > > 4. MdeModulePkg/UefiBootManagerLib: It’s sorting array of
>> > > EFI_BOOT_MANAGER_LOAD_OPTION.
>> > > 5. MdeModulePkg/CapsuleApp: It’s sorting array of
>> (EFI_FILE_INFO *)
>> > > 6. CryptoPkg/CrtWrapper: It’s sorting array of (unknown
>> type).
>> > > 7. RedfishPkg/RedfishCrtLib: It’s sorting array of
>> (unknown type).
>> > >
>> > > For 1~5, it’s easy to know that the size of the element is
>> smaller
>> > > than 256. The AllocatePool() can be skipped.
>> > >
>> > > Thanks,
>> > >
>> > > Ray
>> > >
>> > > *From:*gaoliming <gaoliming at byosoft.com.cn>
>> > > *Sent:* Sunday, September 26, 2021 10:01 AM
>> > > *To:* Ni, Ray <ray.ni at intel.com>; devel at edk2.groups.io;
>> Chan, Amy
>> > > <amy.chan at intel.com>; 'Andrew Fish' <afish at apple.com>
>> > > *Cc:* Kinney, Michael D <michael.d.kinney at intel.com>;
>> 'Gao, Liming'
>> > > <liming.gao at intel.com>; Liu, Zhiguang
>> <zhiguang.liu at intel.com>;
>> > Wang,
>> > > Jian J <jian.j.wang at intel.com>; Gao, Zhichao
>> <zhichao.gao at intel.com>
>> > > *Subject:* 回复: [edk2-devel] RFC: Add BaseLib/QuickSort in
>> MdePkg
>> > >
>> > > Ray:
>> > >
>> > > I may suggest to always require BufferOneElement. The
>> consumer code
>> > > may not know ElementSize. To avoid the error, the consumer
>> must
>> > > allocate buffer for BufferOneElement. If so,
>> BufferOneElement is
>> > the
>> > > required parameter.
>> > >
>> > > Thanks
>> > >
>> > > Liming
>> > >
>> > > *发件人**:*Ni, Ray <ray.ni at intel.com
>> <mailto:ray.ni at intel.com>>
>> > > *发送时间:* 2021年9月24日 11:53
>> > > *收件人:* devel at edk2.groups.io <mailto:devel at edk2.groups.io>;
>> Ni,
>> > Ray
>> > > <ray.ni at intel.com <mailto:ray.ni at intel.com>>; Chan, Amy
>> > > <amy.chan at intel.com <mailto:amy.chan at intel.com>>; gaoliming
>> > > <gaoliming at byosoft.com.cn <mailto:gaoliming at byosoft.com.cn>>;
>> > 'Andrew
>> > > Fish' <afish at apple.com <mailto:afish at apple.com>>
>> > > *抄送:* Kinney, Michael D <michael.d.kinney at intel.com
>> > > <mailto:michael.d.kinney at intel.com>>; 'Gao, Liming'
>> > > <liming.gao at intel.com <mailto:liming.gao at intel.com>>; Liu,
>> Zhiguang
>> > > <zhiguang.liu at intel.com <mailto:zhiguang.liu at intel.com>>;
>> Wang,
>> > Jian J
>> > > <jian.j.wang at intel.com <mailto:jian.j.wang at intel.com>>; Gao,
>> > Zhichao
>> > > <zhichao.gao at intel.com <mailto:zhichao.gao at intel.com>>
>> > > *主题:* RE: [edk2-devel] RFC: Add BaseLib/QuickSort in MdePkg
>> > >
>> > > More details on new QuickSort() API:
>> > >
>> > > The new API needs to carry additional parameter
>> “BufferOneElement”.
>> > >
>> > > This parameter gives QuickSort() the temporary buffer for
>> > swapping in
>> > > sorting.
>> > >
>> > > It’s to avoid BaseLib depends on MemoryAllocationLib.
>> > >
>> > > …
>> > >
>> > > @param [in] BufferOneElement When ElementSize > 256, caller
>> > needs to
>> > > provide a buffer whose size
>> > > equals to ElementSize. It’s
>> used by
>> > > QuickSort() for swapping in sorting.
>> > >
>> > > When ElementSize <= 256, QuickSort() uses a local stack
>> 256-byte
>> > buffer.
>> > >
>> > > @retval EFI_INVALID_PARAMETER When (ElementSize > 256) and
>> > > (BufferOneElement == NULL).
>> > >
>> > > …
>> > >
>> > > VOID
>> > >
>> > > EFIAPI
>> > >
>> > > QuickSort (
>> > >
>> > > IN OUT VOID *BufferToSort,
>> > >
>> > > IN CONST UINTN ElementCount,
>> > >
>> > > IN CONST UINTN ElementSize,
>> > >
>> > > IN SORT_COMPARE CompareFunction,
>> > >
>> > > IN VOID *BufferOneElement OPTIONAL
>> > >
>> > > );
>> > >
>> > > Any comments?
>> > >
>> > > *From:*devel at edk2.groups.io <mailto:devel at edk2.groups.io>
>> > > <devel at edk2.groups.io <mailto:devel at edk2.groups.io>> *On
>> Behalf Of
>> > > *Ni, Ray
>> > > *Sent:* Wednesday, September 22, 2021 2:04 PM
>> > > *To:* Chan, Amy <amy.chan at intel.com
>> <mailto:amy.chan at intel.com>>;
>> > > gaoliming <gaoliming at byosoft.com.cn
>> > > <mailto:gaoliming at byosoft.com.cn>>; 'Andrew Fish'
>> <afish at apple.com
>> > > <mailto:afish at apple.com>>; 'edk2-devel-groups-io'
>> > > <devel at edk2.groups.io <mailto:devel at edk2.groups.io>>
>> > > *Cc:* Kinney, Michael D <michael.d.kinney at intel.com
>> > > <mailto:michael.d.kinney at intel.com>>; 'Gao, Liming'
>> > > <liming.gao at intel.com <mailto:liming.gao at intel.com>>; Liu,
>> Zhiguang
>> > > <zhiguang.liu at intel.com <mailto:zhiguang.liu at intel.com>>;
>> Wang,
>> > Jian J
>> > > <jian.j.wang at intel.com <mailto:jian.j.wang at intel.com>>; Gao,
>> > Zhichao
>> > > <zhichao.gao at intel.com <mailto:zhichao.gao at intel.com>>
>> > > *Subject:* Re: [edk2-devel] RFC: Add BaseLib/QuickSort in
>> MdePkg
>> > >
>> > > I don’t see objection so far.
>> > >
>> > > So, the final solution is:
>> > >
>> > > 1. Add QuickSort() API to BaseLib in MdePkg.
>> > > 2. Update existing MdeModulePkg/SortLib to use
>> QuickSort() in the
>> > > implementation (proposed by Andrew Fish and Liming Gao)
>> > > 3. Update UefiCpuPkg to use QuickSortLib to remove improper
>> > > dependency on MdeModulePkg
>> > >
>> > > Thanks,
>> > >
>> > > Ray
>> > >
>> > > *From:*Ni, Ray
>> > > *Sent:* Thursday, September 16, 2021 10:48 AM
>> > > *To:* Chan, Amy <amy.chan at intel.com
>> <mailto:amy.chan at intel.com>>;
>> > > gaoliming <gaoliming at byosoft.com.cn
>> > > <mailto:gaoliming at byosoft.com.cn>>; 'Andrew Fish'
>> <afish at apple.com
>> > > <mailto:afish at apple.com>>; 'edk2-devel-groups-io'
>> > > <devel at edk2.groups.io <mailto:devel at edk2.groups.io>>
>> > > *Cc:* Kinney, Michael D <michael.d.kinney at intel.com
>> > > <mailto:michael.d.kinney at intel.com>>; 'Gao, Liming'
>> > > <liming.gao at intel.com <mailto:liming.gao at intel.com>>; Liu,
>> Zhiguang
>> > > <Zhiguang.Liu at intel.com <mailto:Zhiguang.Liu at intel.com>>;
>> Wang,
>> > Jian J
>> > > <jian.j.wang at intel.com <mailto:jian.j.wang at intel.com>>; Gao,
>> > Zhichao
>> > > <zhichao.gao at intel.com <mailto:zhichao.gao at intel.com>>
>> > > *Subject:* RE: [edk2-devel] RFC: Add BaseLib/QuickSort in
>> MdePkg
>> > >
>> > > Amy,
>> > >
>> > > No. We only Add QuickSort() function API into BaseLib.h.
>> > >
>> > > *From:*Chan, Amy <amy.chan at intel.com
>> <mailto:amy.chan at intel.com>>
>> > > *Sent:* Thursday, September 16, 2021 10:46 AM
>> > > *To:* gaoliming <gaoliming at byosoft.com.cn
>> > > <mailto:gaoliming at byosoft.com.cn>>; 'Andrew Fish'
>> <afish at apple.com
>> > > <mailto:afish at apple.com>>; 'edk2-devel-groups-io'
>> > > <devel at edk2.groups.io <mailto:devel at edk2.groups.io>>
>> > > *Cc:* Ni, Ray <ray.ni at intel.com
>> <mailto:ray.ni at intel.com>>; Kinney,
>> > > Michael D <michael.d.kinney at intel.com
>> > > <mailto:michael.d.kinney at intel.com>>; 'Gao, Liming'
>> > > <liming.gao at intel.com <mailto:liming.gao at intel.com>>; Liu,
>> Zhiguang
>> > > <zhiguang.liu at intel.com <mailto:zhiguang.liu at intel.com>>;
>> Wang,
>> > Jian J
>> > > <jian.j.wang at intel.com <mailto:jian.j.wang at intel.com>>; Gao,
>> > Zhichao
>> > > <zhichao.gao at intel.com <mailto:zhichao.gao at intel.com>>
>> > > *Subject:* RE: [edk2-devel] RFC: Add BaseLib/QuickSort in
>> MdePkg
>> > >
>> > > Just to double confirm, will we have the null instance of
>> > QuickSort in
>> > > MdePkg?
>> > >
>> > > Regards,
>> > >
>> > > Amy
>> > >
>> > > *From:*gaoliming <gaoliming at byosoft.com.cn
>> > > <mailto:gaoliming at byosoft.com.cn>>
>> > > *Sent:* Thursday, September 16, 2021 10:23 AM
>> > > *To:* 'Andrew Fish' <afish at apple.com
>> <mailto:afish at apple.com>>;
>> > > 'edk2-devel-groups-io' <devel at edk2.groups.io
>> > > <mailto:devel at edk2.groups.io>>
>> > > *Cc:* Ni, Ray <ray.ni at intel.com
>> <mailto:ray.ni at intel.com>>; Kinney,
>> > > Michael D <michael.d.kinney at intel.com
>> > > <mailto:michael.d.kinney at intel.com>>; 'Gao, Liming'
>> > > <liming.gao at intel.com <mailto:liming.gao at intel.com>>; Liu,
>> Zhiguang
>> > > <zhiguang.liu at intel.com <mailto:zhiguang.liu at intel.com>>;
>> Wang,
>> > Jian J
>> > > <jian.j.wang at intel.com <mailto:jian.j.wang at intel.com>>; Gao,
>> > Zhichao
>> > > <zhichao.gao at intel.com <mailto:zhichao.gao at intel.com>>;
>> Chan, Amy
>> > > <amy.chan at intel.com <mailto:amy.chan at intel.com>>
>> > > *Subject:* 回复: [edk2-devel] RFC: Add BaseLib/QuickSort in
>> MdePkg
>> > >
>> > > Andrew:
>> > >
>> > > Thanks for your suggestion. I think your idea is better.
>> We add new
>> > > QuickSort() API to BaseLib, and update SortLib library
>> instance to
>> > > consume BaseLib QuickSort() API. This way has no change in
>> current
>> > > SortLib library class. It is the compatible solution.
>> > >
>> > > Thanks
>> > >
>> > > Liming
>> > >
>> > > *发件人**:*Andrew Fish <afish at apple.com
>> <mailto:afish at apple.com>>
>> > > *发送时间:* 2021年9月16日 10:13
>> > > *收件人:* edk2-devel-groups-io <devel at edk2.groups.io
>> > > <mailto:devel at edk2.groups.io>>; Liming Gao
>> > <gaoliming at byosoft.com.cn
>> > > <mailto:gaoliming at byosoft.com.cn>>
>> > > *抄送:* Ni, Ray <ray.ni at intel.com
>> <mailto:ray.ni at intel.com>>; Mike
>> > > Kinney <michael.d.kinney at intel.com
>> > > <mailto:michael.d.kinney at intel.com>>; Gao, Liming
>> > > <liming.gao at intel.com <mailto:liming.gao at intel.com>>; Liu,
>> Zhiguang
>> > > <zhiguang.liu at intel.com <mailto:zhiguang.liu at intel.com>>;
>> Wang,
>> > Jian J
>> > > <jian.j.wang at intel.com <mailto:jian.j.wang at intel.com>>; Gao,
>> > Zhichao
>> > > <zhichao.gao at intel.com <mailto:zhichao.gao at intel.com>>;
>> Chan, Amy
>> > > <amy.chan at intel.com <mailto:amy.chan at intel.com>>
>> > > *主题:* Re: [edk2-devel] RFC: Add BaseLib/QuickSort in MdePkg
>> > >
>> > > On Sep 15, 2021, at 6:26 PM, gaoliming
>> <gaoliming at byosoft.com.cn
>> > > <mailto:gaoliming at byosoft.com.cn>> wrote:
>> > >
>> > > Ray:
>> > >
>> > > SortLib has been added since 2015. I would suggest to
>> still keep
>> > > this library class. To resolve the package dependency, my
>> > proposal
>> > > is to move the library class header file SortLib.h from
>> > > MdeModulePkg to MdePkg, and still keep the library
>> instance in
>> > > MdeModulePkg. This proposal has no impact on the existing
>> > platform.
>> > >
>> > > If we add QuickSort() API to the BaseLib can we not just
>> port the
>> > > existing MdeModulePkg/SortLib to use QuickSort() in the
>> > > implementation? Or is there some other way to add the new
>> thing
>> > in a
>> > > backward compatible way.
>> > >
>> > > Thanks,
>> > >
>> > > Andrew Fish
>> > >
>> > > Thanks
>> > >
>> > > Liming
>> > >
>> > > *发件人**:*devel at edk2.groups.io
>> > > <mailto:devel at edk2.groups.io><devel at edk2.groups.io
>> > > <mailto:devel at edk2.groups.io>>*代表***Ni, Ray
>> > > *发送时间:*2021年9月14日14:15
>> > > *收件人:*Kinney, Michael D <michael.d.kinney at intel.com
>> > > <mailto:michael.d.kinney at intel.com>>; Gao, Liming
>> > > <liming.gao at intel.com <mailto:liming.gao at intel.com>>; Liu,
>> > > Zhiguang <zhiguang.liu at intel.com
>> > <mailto:zhiguang.liu at intel.com>>;
>> > > Wang, Jian J <jian.j.wang at intel.com
>> > > <mailto:jian.j.wang at intel.com>>; Gao, Zhichao
>> > > <zhichao.gao at intel.com <mailto:zhichao.gao at intel.com>>
>> > > *抄送:*devel at edk2.groups.io <mailto:devel at edk2.groups.io>;
>> > Chan, Amy
>> > > <amy.chan at intel.com <mailto:amy.chan at intel.com>>
>> > > *主题:*[edk2-devel] RFC: Add BaseLib/QuickSort in MdePkg
>> > >
>> > > Hi package maintainers of MdePkg, MdeModulePkg and
>> ShellPkg,
>> > > community,
>> > >
>> > > A commit (UefiCpuPkg/CpuCacheInfoLib: Sort
>> CpuCacheInfo array
>> > >
>> >
>> <https://github.com/tianocore/edk2/commit/4de77ae9890d241271f543e9195ab3516f3abec6>)
>> > > to UefiCpuPkg let
>> > > UefiCpuPkg depend on MdeModulePkg because the SortLib
>> class and
>> > > instances are all in MdeModulePkg.
>> > >
>> > > UefiCpuPkg depending on MdeModulePkg breaks the rule that
>> > > “UefiCpuPkg should ONLY depend on MdePkg”.
>> > >
>> > > To address this issue, there are two approaches:
>> > >
>> > > 1. Duplicate the sort logic in UefiCpuPkg to not
>> depend on
>> > > MdeModulePkg/SortLib
>> > > 2. Add QuickSort() API to BaseLib in MdePkg.
>> > >
>> > > Approach #2 (MdePkg/BaseLib/QuickSort) makes more
>> sense because
>> > > quick sort is a standard algorithm.
>> > >
>> > > We encourage consumers to update their code to use the
>> quick
>> > sort
>> > > in MdePkg and gradually deprecate today’s
>> MdeModulePkg/SortLib.
>> > >
>> > > If you don’t have concerns, I plan to:
>> > >
>> > > 1. “Add QuickSort() to BaseLib” and update all existing
>> > consumers
>> > > to use this API instead.
>> > >
>> > > VOID
>> > >
>> > > EFIAPI
>> > >
>> > > QuickSort (
>> > >
>> > > IN OUT VOID *BufferToSort,
>> > >
>> > > IN CONST UINTN Count,
>> > >
>> > > IN CONST UINTN ElementSize,
>> > >
>> > > IN SORT_COMPARE CompareFunction
>> > >
>> > > );
>> > >
>> > > 2. “Add new ShellPkg/SortCompareLib”
>> > >
>> > > Background: ShellPkg requires to sort
>> devicepath/string so 3
>> > APIs
>> > > in UefiSortLib (DevicePathCompare, StringNoCaseCompare,
>> > > StringCompare) are provided for Shell usage. we can
>> move the 3
>> > > APIs to the SortCompareLib and update Shell code to use
>> > > BaseLib/QuickSort directly, with the sort compare
>> function from
>> > > SortCompareLib.
>> > >
>> > > Any concerns?
>> > >
>> > > Thanks,
>> > >
>> > > Ray
>> > >
>> > >
>> >
>> >
>>
>>
--
Brian
--------------------------------------------------------------------
"Remember that ignorance is expensive."
-- From LLIB
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#81234): https://edk2.groups.io/g/devel/message/81234
Mute This Topic: https://groups.io/mt/85872410/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list