[edk2-devel] [PATCH 1/1] MdeModulePkg/NvmExpressPei: Use PCI_DEVICE_PPI to manage Nvme device
Wu, Hao A
hao.a.wu at intel.com
Tue Aug 30 02:29:52 UTC 2022
Thanks for the patch, it looks good to me generally.
One comment within NvmeInitControllerDataFromPciDevice(), could you help to refine the BAR type check?
For bits 2:0
000: 32 bit memory space
100: 64 bit memory space
All other values are not supported by the driver.
Also, could you help to add the unit test information in the cover-letter (title begins with '[PATCH 0/1]')?
Thanks in advance.
Best Regards,
Hao Wu
> -----Original Message-----
> From: Chen, Xiao X <xiao.x.chen at intel.com>
> Sent: Tuesday, August 30, 2022 9:06 AM
> To: devel at edk2.groups.io
> Cc: Chen, Xiao X <xiao.x.chen at intel.com>; Wu, Hao A
> <hao.a.wu at intel.com>; Ni, Ray <ray.ni at intel.com>
> Subject: [PATCH 1/1] MdeModulePkg/NvmExpressPei: Use PCI_DEVICE_PPI
> to manage Nvme device
>
> https://bugzilla.tianocore.org/show_bug.cgi?id=4017
>
> This change modifies NvmExpressPei library to allow usage both
> EDKII_PCI_DEVICE_PPI and EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI
> to manage Nvme device.
>
> Signed-off-by: Xiao X Chen <xiao.x.chen at intel.com>
> Cc: Hao A Wu <hao.a.wu at intel.com>
> Cc: Ray Ni <ray.ni at intel.com>
> ---
> .../Bus/Pci/NvmExpressPei/DevicePath.c | 44 --
> .../Bus/Pci/NvmExpressPei/NvmExpressPei.c | 628 ++++++++++++------
> .../Bus/Pci/NvmExpressPei/NvmExpressPei.h | 54 ++
> .../Bus/Pci/NvmExpressPei/NvmExpressPei.inf | 3 +-
> 4 files changed, 477 insertions(+), 252 deletions(-)
>
> diff --git a/MdeModulePkg/Bus/Pci/NvmExpressPei/DevicePath.c
> b/MdeModulePkg/Bus/Pci/NvmExpressPei/DevicePath.c
> index 9b454a7dd8f4..307045be70ea 100644
> --- a/MdeModulePkg/Bus/Pci/NvmExpressPei/DevicePath.c
> +++ b/MdeModulePkg/Bus/Pci/NvmExpressPei/DevicePath.c
> @@ -37,50 +37,6 @@ EFI_DEVICE_PATH_PROTOCOL
> mNvmeEndDevicePathNodeTemplate = {
> }
> };
>
> -/**
> - Returns the 16-bit Length field of a device path node.
> -
> - Returns the 16-bit Length field of the device path node specified by Node.
> - Node is not required to be aligned on a 16-bit boundary, so it is
> recommended
> - that a function such as ReadUnaligned16() be used to extract the contents
> of
> - the Length field.
> -
> - If Node is NULL, then ASSERT().
> -
> - @param Node A pointer to a device path node data structure.
> -
> - @return The 16-bit Length field of the device path node specified by Node.
> -
> -**/
> -UINTN
> -DevicePathNodeLength (
> - IN CONST VOID *Node
> - )
> -{
> - ASSERT (Node != NULL);
> - return ReadUnaligned16 ((UINT16 *)&((EFI_DEVICE_PATH_PROTOCOL
> *)(Node))->Length[0]); -}
> -
> -/**
> - Returns a pointer to the next node in a device path.
> -
> - If Node is NULL, then ASSERT().
> -
> - @param Node A pointer to a device path node data structure.
> -
> - @return a pointer to the device path node that follows the device path
> node
> - specified by Node.
> -
> -**/
> -EFI_DEVICE_PATH_PROTOCOL *
> -NextDevicePathNode (
> - IN CONST VOID *Node
> - )
> -{
> - ASSERT (Node != NULL);
> - return (EFI_DEVICE_PATH_PROTOCOL *)((UINT8 *)(Node) +
> DevicePathNodeLength (Node)); -}
> -
> /**
> Get the size of the current device path instance.
>
> diff --git a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.c
> b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.c
> index 2d6a79028fcd..210c8c2c268f 100644
> --- a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.c
> +++ b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.c
> @@ -40,6 +40,18 @@ EFI_PEI_NOTIFY_DESCRIPTOR
> mNvmeEndOfPeiNotifyListTemplate = {
> NvmePeimEndOfPei
> };
>
> +EFI_PEI_NOTIFY_DESCRIPTOR mNvmeHostControllerNotify = {
> + (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK |
> +EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
> + &gEdkiiPeiNvmExpressHostControllerPpiGuid,
> + NvmeHostControllerPpiInstallationCallback
> +};
> +
> +EFI_PEI_NOTIFY_DESCRIPTOR mPciDevicePpiNotify = {
> + (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK |
> +EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
> + &gEdkiiPeiPciDevicePpiGuid,
> + NvmePciDevicePpiInstallationCallback
> +};
> +
> /**
> Check if the specified Nvm Express device namespace is active, and then
> get the Identify
> Namespace data.
> @@ -212,30 +224,27 @@ NvmePeimEndOfPei ( }
>
> /**
> - Entry point of the PEIM.
> + Initialize and install PrivateData PPIs.
>
> - @param[in] FileHandle Handle of the file being invoked.
> - @param[in] PeiServices Describes the list of possible PEI Services.
> -
> - @retval EFI_SUCCESS PPI successfully installed.
> + @param[in] MmioBase MMIO base address of specific Nvme
> controller
> + @param[in] DevicePath A pointer to the
> EFI_DEVICE_PATH_PROTOCOL
> + structure.
> + @param[in] DevicePathLength Length of the device path.
>
> + @retval EFI_SUCCESS Nvme controller initialized and PPIs installed
> + @retval others Failed to initialize Nvme controller
> **/
> EFI_STATUS
> -EFIAPI
> -NvmExpressPeimEntry (
> - IN EFI_PEI_FILE_HANDLE FileHandle,
> - IN CONST EFI_PEI_SERVICES **PeiServices
> +NvmeInitPrivateData (
> + IN UINTN MmioBase,
> + IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
> + IN UINTN DevicePathLength
> )
> {
> - EFI_STATUS Status;
> - EFI_BOOT_MODE BootMode;
> - EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *NvmeHcPpi;
> - UINT8 Controller;
> - UINTN MmioBase;
> - UINTN DevicePathLength;
> - EFI_DEVICE_PATH_PROTOCOL *DevicePath;
> - PEI_NVME_CONTROLLER_PRIVATE_DATA *Private;
> - EFI_PHYSICAL_ADDRESS DeviceAddress;
> + EFI_STATUS Status;
> + EFI_BOOT_MODE BootMode;
> + PEI_NVME_CONTROLLER_PRIVATE_DATA *Private;
> + EFI_PHYSICAL_ADDRESS DeviceAddress;
>
> DEBUG ((DEBUG_INFO, "%a: Enters.\n", __FUNCTION__));
>
> @@ -249,19 +258,347 @@ NvmExpressPeimEntry (
> }
>
> //
> - // Locate the NVME host controller PPI
> + // Check validity of the device path of the NVM Express controller.
> //
> - Status = PeiServicesLocatePpi (
> - &gEdkiiPeiNvmExpressHostControllerPpiGuid,
> - 0,
> - NULL,
> - (VOID **)&NvmeHcPpi
> + Status = NvmeIsHcDevicePathValid (DevicePath, DevicePathLength); if
> + (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: The device path is invalid for Controller %d.\n",
> + __FUNCTION__
> + ));
> + return Status;
> + }
> +
> + //
> + // For S3 resume performance consideration, not all NVM Express
> + controllers // will be initialized. The driver consumes the content
> + within // S3StorageDeviceInitList LockBox to see if a controller will
> + be skipped // during S3 resume.
> + //
> + if ((BootMode == BOOT_ON_S3_RESUME) &&
> + (NvmeS3SkipThisController (DevicePath, DevicePathLength))) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: skipped during S3.\n",
> + __FUNCTION__
> + ));
> + return EFI_SUCCESS;
> + }
> +
> + //
> + // Memory allocation for controller private data // Private =
> + AllocateZeroPool (sizeof (PEI_NVME_CONTROLLER_PRIVATE_DATA));
> + if (Private == NULL) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: Fail to allocate private data.\n",
> + __FUNCTION__
> + ));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + //
> + // Memory allocation for transfer-related data // Status =
> + IoMmuAllocateBuffer (
> + NVME_MEM_MAX_PAGES,
> + &Private->Buffer,
> + &DeviceAddress,
> + &Private->BufferMapping
> );
> if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "%a: Fail to locate NvmeHostControllerPpi.\n",
> __FUNCTION__));
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: Fail to allocate DMA buffers.\n",
> + __FUNCTION__
> + ));
> + return Status;
> + }
> +
> + ASSERT (DeviceAddress ==
> + ((EFI_PHYSICAL_ADDRESS)(UINTN)Private->Buffer));
> + DEBUG ((DEBUG_INFO, "%a: DMA buffer base at 0x%x\n",
> __FUNCTION__,
> + Private->Buffer));
> +
> + //
> + // Initialize controller private data //
> + Private->Signature =
> NVME_PEI_CONTROLLER_PRIVATE_DATA_SIGNATURE;
> + Private->MmioBase = MmioBase;
> + Private->DevicePathLength = DevicePathLength;
> + Private->DevicePath = DevicePath;
> +
> + //
> + // Initialize the NVME controller
> + //
> + Status = NvmeControllerInit (Private); if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: Controller initialization fail with Status - %r.\n",
> + __FUNCTION__,
> + Status
> + ));
> + NvmeFreeDmaResource (Private);
> + return Status;
> + }
> +
> + //
> + // Enumerate the NVME namespaces on the controller // Status =
> + NvmeDiscoverNamespaces (Private); if (EFI_ERROR (Status)) {
> + //
> + // No active namespace was found on the controller
> + //
> + DEBUG ((
> + DEBUG_ERROR,
> + "%a: Namespaces discovery fail with Status - %r.\n",
> + __FUNCTION__,
> + Status
> + ));
> + NvmeFreeDmaResource (Private);
> + return Status;
> + }
> +
> + //
> + // Nvm Express Pass Thru PPI
> + //
> + Private->PassThruMode.Attributes =
> EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_PHYSICAL |
> + EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_LOGICAL
> |
> +
> EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_CMD_SET_NVM;
> + Private->PassThruMode.IoAlign = sizeof (UINTN);
> + Private->PassThruMode.NvmeVersion =
> EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_REVISION;
> + Private->NvmePassThruPpi.Mode = &Private->PassThruMode;
> + Private->NvmePassThruPpi.GetDevicePath =
> NvmePassThruGetDevicePath;
> + Private->NvmePassThruPpi.GetNextNameSpace =
> NvmePassThruGetNextNameSpace;
> + Private->NvmePassThruPpi.PassThru = NvmePassThru;
> + CopyMem (
> + &Private->NvmePassThruPpiList,
> + &mNvmePassThruPpiListTemplate,
> + sizeof (EFI_PEI_PPI_DESCRIPTOR)
> + );
> + Private->NvmePassThruPpiList.Ppi = &Private->NvmePassThruPpi;
> + PeiServicesInstallPpi (&Private->NvmePassThruPpiList);
> +
> + //
> + // Block Io PPI
> + //
> + Private->BlkIoPpi.GetNumberOfBlockDevices =
> + NvmeBlockIoPeimGetDeviceNo; Private-
> >BlkIoPpi.GetBlockDeviceMediaInfo = NvmeBlockIoPeimGetMediaInfo;
> + Private->BlkIoPpi.ReadBlocks = NvmeBlockIoPeimReadBlocks;
> + CopyMem (
> + &Private->BlkIoPpiList,
> + &mNvmeBlkIoPpiListTemplate,
> + sizeof (EFI_PEI_PPI_DESCRIPTOR)
> + );
> + Private->BlkIoPpiList.Ppi = &Private->BlkIoPpi;
> +
> + Private->BlkIo2Ppi.Revision =
> EFI_PEI_RECOVERY_BLOCK_IO2_PPI_REVISION;
> + Private->BlkIo2Ppi.GetNumberOfBlockDevices =
> + NvmeBlockIoPeimGetDeviceNo2; Private-
> >BlkIo2Ppi.GetBlockDeviceMediaInfo = NvmeBlockIoPeimGetMediaInfo2;
> + Private->BlkIo2Ppi.ReadBlocks = NvmeBlockIoPeimReadBlocks2;
> + CopyMem (
> + &Private->BlkIo2PpiList,
> + &mNvmeBlkIo2PpiListTemplate,
> + sizeof (EFI_PEI_PPI_DESCRIPTOR)
> + );
> + Private->BlkIo2PpiList.Ppi = &Private->BlkIo2Ppi;
> + PeiServicesInstallPpi (&Private->BlkIoPpiList);
> +
> + //
> + // Check if the NVME controller supports the Security Receive/Send
> + commands // if ((Private->ControllerData->Oacs &
> + SECURITY_SEND_RECEIVE_SUPPORTED) != 0) {
> + DEBUG ((
> + DEBUG_INFO,
> + "%a: Security Security Command PPI will be produced.\n",
> + __FUNCTION__
> + ));
> + Private->StorageSecurityPpi.Revision =
> EDKII_STORAGE_SECURITY_PPI_REVISION;
> + Private->StorageSecurityPpi.GetNumberofDevices =
> NvmeStorageSecurityGetDeviceNo;
> + Private->StorageSecurityPpi.GetDevicePath =
> NvmeStorageSecurityGetDevicePath;
> + Private->StorageSecurityPpi.ReceiveData =
> NvmeStorageSecurityReceiveData;
> + Private->StorageSecurityPpi.SendData =
> NvmeStorageSecuritySendData;
> + CopyMem (
> + &Private->StorageSecurityPpiList,
> + &mNvmeStorageSecurityPpiListTemplate,
> + sizeof (EFI_PEI_PPI_DESCRIPTOR)
> + );
> + Private->StorageSecurityPpiList.Ppi = &Private->StorageSecurityPpi;
> + PeiServicesInstallPpi (&Private->StorageSecurityPpiList);
> + }
> +
> + CopyMem (
> + &Private->EndOfPeiNotifyList,
> + &mNvmeEndOfPeiNotifyListTemplate,
> + sizeof (EFI_PEI_NOTIFY_DESCRIPTOR)
> + );
> + PeiServicesNotifyPpi (&Private->EndOfPeiNotifyList);
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Initialize Nvme controller from fiven PCI_DEVICE_PPI.
> +
> + @param[in] PciDevice Pointer to the PCI Device PPI instance.
> +
> + @retval EFI_SUCCESS The function completes successfully
> + @retval Others Cannot initialize Nvme controller for given device
> +**/
> +EFI_STATUS
> +NvmeInitControllerDataFromPciDevice (
> + EDKII_PCI_DEVICE_PPI *PciDevice
> + )
> +{
> + EFI_STATUS Status;
> + PCI_TYPE00 PciData;
> + UINTN MmioBase;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePath;
> + UINTN DevicePathLength;
> + UINT64 EnabledPciAttributes;
> + UINT32 MmioBaseH;
> +
> + //
> + // Now further check the PCI header: Base Class (offset 0x0B), Sub
> + Class (offset 0x0A) and // Programming Interface (offset 0x09). This
> + controller should be an Nvme controller // Status =
> + PciDevice->PciIo.Pci.Read (
> + &PciDevice->PciIo,
> + EfiPciIoWidthUint8,
> + PCI_CLASSCODE_OFFSET,
> + sizeof (PciData.Hdr.ClassCode),
> + PciData.Hdr.ClassCode
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + if (!IS_PCI_NVMHCI (&PciData)) {
> return EFI_UNSUPPORTED;
> }
>
> + Status = PciDevice->PciIo.Attributes (
> + &PciDevice->PciIo,
> + EfiPciIoAttributeOperationSupported,
> + 0,
> + &EnabledPciAttributes
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_UNSUPPORTED;
> + } else {
> + EnabledPciAttributes &= (UINT64)EFI_PCI_DEVICE_ENABLE;
> + Status = PciDevice->PciIo.Attributes (
> + &PciDevice->PciIo,
> + EfiPciIoAttributeOperationEnable,
> + EnabledPciAttributes,
> + NULL
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_UNSUPPORTED;
> + }
> + }
> +
> + Status = PciDevice->PciIo.Pci.Read (
> + &PciDevice->PciIo,
> + EfiPciIoWidthUint32,
> + PCI_BASE_ADDRESSREG_OFFSET,
> + 1,
> + &MmioBase
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + if (MmioBase & BIT2) {
> + //
> + // For 64 bit bar, read the high 32bits of this 64 bit bar
> + //
> + Status = PciDevice->PciIo.Pci.Read (
> + &PciDevice->PciIo,
> + EfiPciIoWidthUint32,
> + PCI_BASE_ADDRESSREG_OFFSET + 4,
> + 1,
> + &MmioBaseH
> + );
> + //
> + // For 32 bit environment, high 32bits of the bar should be zero.
> + //
> + if ( EFI_ERROR (Status)
> + || ((MmioBaseH != 0) && (sizeof (UINTN) == sizeof (UINT32))))
> + {
> + return EFI_UNSUPPORTED;
> + }
> +
> + MmioBase = MmioBase & 0xFFFFFFF0;
> + MmioBase |= LShiftU64 ((UINT64)MmioBaseH, 32); } else {
> + MmioBase = MmioBase & 0xFFFFFFF0;
> + }
> +
> + DevicePathLength = GetDevicePathSize (PciDevice->DevicePath);
> + DevicePath = PciDevice->DevicePath;
> +
> + Status = NvmeInitPrivateData (MmioBase, DevicePath,
> + DevicePathLength); if (EFI_ERROR (Status)) {
> + DEBUG ((
> + DEBUG_INFO,
> + "%a: Failed to init controller, with Status - %r\n",
> + __FUNCTION__,
> + Status
> + ));
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Callback for EDKII_PCI_DEVICE_PPI installation.
> +
> + @param[in] PeiServices Pointer to PEI Services Table.
> + @param[in] NotifyDescriptor Pointer to the descriptor for the
> Notification
> + event that caused this function to execute.
> + @param[in] Ppi Pointer to the PPI data associated with this
> function.
> +
> + @retval EFI_SUCCESS The function completes successfully
> + @retval Others Cannot initialize Nvme controller from given
> PCI_DEVICE_PPI
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NvmePciDevicePpiInstallationCallback (
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
> + IN VOID *Ppi
> + )
> +{
> + EDKII_PCI_DEVICE_PPI *PciDevice;
> +
> + PciDevice = (EDKII_PCI_DEVICE_PPI *)Ppi;
> +
> + return NvmeInitControllerDataFromPciDevice (PciDevice); }
> +
> +/**
> + Initialize Nvme controller from
> EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI instance.
> +
> + @param[in] NvmeHcPpi Pointer to the Nvme Host Controller PPI instance.
> +
> + @retval EFI_SUCCESS PPI successfully installed.
> +**/
> +EFI_STATUS
> +NvmeInitControllerFromHostControllerPpi (
> + IN EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *NvmeHcPpi
> + )
> +{
> + UINT8 Controller;
> + UINTN MmioBase;
> + UINTN DevicePathLength;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePath;
> + EFI_STATUS Status;
> +
> Controller = 0;
> MmioBase = 0;
> while (TRUE) {
> @@ -293,88 +630,7 @@ NvmExpressPeimEntry (
> return Status;
> }
>
> - //
> - // Check validity of the device path of the NVM Express controller.
> - //
> - Status = NvmeIsHcDevicePathValid (DevicePath, DevicePathLength);
> - if (EFI_ERROR (Status)) {
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: The device path is invalid for Controller %d.\n",
> - __FUNCTION__,
> - Controller
> - ));
> - Controller++;
> - continue;
> - }
> -
> - //
> - // For S3 resume performance consideration, not all NVM Express
> controllers
> - // will be initialized. The driver consumes the content within
> - // S3StorageDeviceInitList LockBox to see if a controller will be skipped
> - // during S3 resume.
> - //
> - if ((BootMode == BOOT_ON_S3_RESUME) &&
> - (NvmeS3SkipThisController (DevicePath, DevicePathLength)))
> - {
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: Controller %d is skipped during S3.\n",
> - __FUNCTION__,
> - Controller
> - ));
> - Controller++;
> - continue;
> - }
> -
> - //
> - // Memory allocation for controller private data
> - //
> - Private = AllocateZeroPool (sizeof
> (PEI_NVME_CONTROLLER_PRIVATE_DATA));
> - if (Private == NULL) {
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: Fail to allocate private data for Controller %d.\n",
> - __FUNCTION__,
> - Controller
> - ));
> - return EFI_OUT_OF_RESOURCES;
> - }
> -
> - //
> - // Memory allocation for transfer-related data
> - //
> - Status = IoMmuAllocateBuffer (
> - NVME_MEM_MAX_PAGES,
> - &Private->Buffer,
> - &DeviceAddress,
> - &Private->BufferMapping
> - );
> - if (EFI_ERROR (Status)) {
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: Fail to allocate DMA buffers for Controller %d.\n",
> - __FUNCTION__,
> - Controller
> - ));
> - return Status;
> - }
> -
> - ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS)(UINTN)Private-
> >Buffer));
> - DEBUG ((DEBUG_INFO, "%a: DMA buffer base at 0x%x\n",
> __FUNCTION__, Private->Buffer));
> -
> - //
> - // Initialize controller private data
> - //
> - Private->Signature =
> NVME_PEI_CONTROLLER_PRIVATE_DATA_SIGNATURE;
> - Private->MmioBase = MmioBase;
> - Private->DevicePathLength = DevicePathLength;
> - Private->DevicePath = DevicePath;
> -
> - //
> - // Initialize the NVME controller
> - //
> - Status = NvmeControllerInit (Private);
> + Status = NvmeInitPrivateData (MmioBase, DevicePath,
> + DevicePathLength);
> if (EFI_ERROR (Status)) {
> DEBUG ((
> DEBUG_ERROR,
> @@ -383,115 +639,73 @@ NvmExpressPeimEntry (
> Controller,
> Status
> ));
> - NvmeFreeDmaResource (Private);
> - Controller++;
> - continue;
> - }
> -
> - //
> - // Enumerate the NVME namespaces on the controller
> - //
> - Status = NvmeDiscoverNamespaces (Private);
> - if (EFI_ERROR (Status)) {
> - //
> - // No active namespace was found on the controller
> - //
> - DEBUG ((
> - DEBUG_ERROR,
> - "%a: Namespaces discovery fail for Controller %d with Status - %r.\n",
> - __FUNCTION__,
> - Controller,
> - Status
> - ));
> - NvmeFreeDmaResource (Private);
> - Controller++;
> - continue;
> - }
> -
> - //
> - // Nvm Express Pass Thru PPI
> - //
> - Private->PassThruMode.Attributes =
> EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_PHYSICAL |
> - EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_LOGICAL
> |
> -
> EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_CMD_SET_NVM;
> - Private->PassThruMode.IoAlign = sizeof (UINTN);
> - Private->PassThruMode.NvmeVersion =
> EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_REVISION;
> - Private->NvmePassThruPpi.Mode = &Private->PassThruMode;
> - Private->NvmePassThruPpi.GetDevicePath =
> NvmePassThruGetDevicePath;
> - Private->NvmePassThruPpi.GetNextNameSpace =
> NvmePassThruGetNextNameSpace;
> - Private->NvmePassThruPpi.PassThru = NvmePassThru;
> - CopyMem (
> - &Private->NvmePassThruPpiList,
> - &mNvmePassThruPpiListTemplate,
> - sizeof (EFI_PEI_PPI_DESCRIPTOR)
> - );
> - Private->NvmePassThruPpiList.Ppi = &Private->NvmePassThruPpi;
> - PeiServicesInstallPpi (&Private->NvmePassThruPpiList);
> -
> - //
> - // Block Io PPI
> - //
> - Private->BlkIoPpi.GetNumberOfBlockDevices =
> NvmeBlockIoPeimGetDeviceNo;
> - Private->BlkIoPpi.GetBlockDeviceMediaInfo =
> NvmeBlockIoPeimGetMediaInfo;
> - Private->BlkIoPpi.ReadBlocks = NvmeBlockIoPeimReadBlocks;
> - CopyMem (
> - &Private->BlkIoPpiList,
> - &mNvmeBlkIoPpiListTemplate,
> - sizeof (EFI_PEI_PPI_DESCRIPTOR)
> - );
> - Private->BlkIoPpiList.Ppi = &Private->BlkIoPpi;
> -
> - Private->BlkIo2Ppi.Revision =
> EFI_PEI_RECOVERY_BLOCK_IO2_PPI_REVISION;
> - Private->BlkIo2Ppi.GetNumberOfBlockDevices =
> NvmeBlockIoPeimGetDeviceNo2;
> - Private->BlkIo2Ppi.GetBlockDeviceMediaInfo =
> NvmeBlockIoPeimGetMediaInfo2;
> - Private->BlkIo2Ppi.ReadBlocks = NvmeBlockIoPeimReadBlocks2;
> - CopyMem (
> - &Private->BlkIo2PpiList,
> - &mNvmeBlkIo2PpiListTemplate,
> - sizeof (EFI_PEI_PPI_DESCRIPTOR)
> - );
> - Private->BlkIo2PpiList.Ppi = &Private->BlkIo2Ppi;
> - PeiServicesInstallPpi (&Private->BlkIoPpiList);
> -
> - //
> - // Check if the NVME controller supports the Security Receive/Send
> commands
> - //
> - if ((Private->ControllerData->Oacs &
> SECURITY_SEND_RECEIVE_SUPPORTED) != 0) {
> + } else {
> DEBUG ((
> DEBUG_INFO,
> - "%a: Security Security Command PPI will be produced for
> Controller %d.\n",
> + "%a: Controller %d has been successfully initialized.\n",
> __FUNCTION__,
> Controller
> ));
> - Private->StorageSecurityPpi.Revision =
> EDKII_STORAGE_SECURITY_PPI_REVISION;
> - Private->StorageSecurityPpi.GetNumberofDevices =
> NvmeStorageSecurityGetDeviceNo;
> - Private->StorageSecurityPpi.GetDevicePath =
> NvmeStorageSecurityGetDevicePath;
> - Private->StorageSecurityPpi.ReceiveData =
> NvmeStorageSecurityReceiveData;
> - Private->StorageSecurityPpi.SendData =
> NvmeStorageSecuritySendData;
> - CopyMem (
> - &Private->StorageSecurityPpiList,
> - &mNvmeStorageSecurityPpiListTemplate,
> - sizeof (EFI_PEI_PPI_DESCRIPTOR)
> - );
> - Private->StorageSecurityPpiList.Ppi = &Private->StorageSecurityPpi;
> - PeiServicesInstallPpi (&Private->StorageSecurityPpiList);
> }
>
> - CopyMem (
> - &Private->EndOfPeiNotifyList,
> - &mNvmeEndOfPeiNotifyListTemplate,
> - sizeof (EFI_PEI_NOTIFY_DESCRIPTOR)
> - );
> - PeiServicesNotifyPpi (&Private->EndOfPeiNotifyList);
> -
> - DEBUG ((
> - DEBUG_INFO,
> - "%a: Controller %d has been successfully initialized.\n",
> - __FUNCTION__,
> - Controller
> - ));
> Controller++;
> }
>
> return EFI_SUCCESS;
> }
> +
> +/**
> + Callback for EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI installation.
> +
> + @param[in] PeiServices Pointer to PEI Services Table.
> + @param[in] NotifyDescriptor Pointer to the descriptor for the
> Notification
> + event that caused this function to execute.
> + @param[in] Ppi Pointer to the PPI data associated with this
> function.
> +
> + @retval EFI_SUCCESS The function completes successfully
> + @retval Others Cannot initialize Nvme controller from given
> EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NvmeHostControllerPpiInstallationCallback (
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
> + IN VOID *Ppi
> + )
> +{
> + EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *NvmeHcPpi;
> +
> + if (Ppi == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + NvmeHcPpi = (EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI *)Ppi;
> +
> + return NvmeInitControllerFromHostControllerPpi (NvmeHcPpi); }
> +
> +/**
> + Entry point of the PEIM.
> +
> + @param[in] FileHandle Handle of the file being invoked.
> + @param[in] PeiServices Describes the list of possible PEI Services.
> +
> + @retval EFI_SUCCESS PPI successfully installed.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NvmExpressPeimEntry (
> + IN EFI_PEI_FILE_HANDLE FileHandle,
> + IN CONST EFI_PEI_SERVICES **PeiServices
> + )
> +{
> + DEBUG ((DEBUG_INFO, "%a: Enters.\n", __FUNCTION__));
> +
> + PeiServicesNotifyPpi (&mNvmeHostControllerNotify);
> +
> + PeiServicesNotifyPpi (&mPciDevicePpiNotify);
> +
> + return EFI_SUCCESS;
> +}
> diff --git a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.h
> b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.h
> index 78a6b7016503..12a7624099c0 100644
> --- a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.h
> +++ b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.h
> @@ -14,6 +14,7 @@
> #include <PiPei.h>
>
> #include <IndustryStandard/Nvme.h>
> +#include <IndustryStandard/Pci.h>
>
> #include <Ppi/NvmExpressHostController.h> #include <Ppi/BlockIo.h> @@
> -22,6 +23,7 @@ #include <Ppi/NvmExpressPassThru.h> #include
> <Ppi/IoMmu.h> #include <Ppi/EndOfPeiPhase.h>
> +#include <Ppi/PciDevice.h>
>
> #include <Library/DebugLib.h>
> #include <Library/PeiServicesLib.h>
> @@ -29,6 +31,7 @@
> #include <Library/BaseMemoryLib.h>
> #include <Library/IoLib.h>
> #include <Library/TimerLib.h>
> +#include <Library/DevicePathLib.h>
>
> //
> // Structure forward declarations
> @@ -36,6 +39,17 @@
> typedef struct _PEI_NVME_NAMESPACE_INFO
> PEI_NVME_NAMESPACE_INFO;
> typedef struct _PEI_NVME_CONTROLLER_PRIVATE_DATA
> PEI_NVME_CONTROLLER_PRIVATE_DATA;
>
> +/**
> + Macro that checks whether device is a NVMHCI Interface.
> +
> + @param _p Specified device.
> +
> + @retval TRUE Device is a NVMHCI Interface.
> + @retval FALSE Device is not a NVMHCI Interface.
> +
> +**/
> +#define IS_PCI_NVMHCI(_p) IS_CLASS3 (_p, PCI_CLASS_MASS_STORAGE,
> +PCI_CLASS_MASS_STORAGE_SOLID_STATE,
> +PCI_IF_MASS_STORAGE_SOLID_STATE_ENTERPRISE_NVMHCI)
> +
> #include "NvmExpressPeiHci.h"
> #include "NvmExpressPeiPassThru.h"
> #include "NvmExpressPeiBlockIo.h"
> @@ -345,4 +359,44 @@ NvmeS3SkipThisController (
> IN UINTN HcDevicePathLength
> );
>
> +/**
> + Callback for EDKII_PCI_DEVICE_PPI installation.
> +
> + @param[in] PeiServices Pointer to PEI Services Table.
> + @param[in] NotifyDescriptor Pointer to the descriptor for the
> Notification
> + event that caused this function to execute.
> + @param[in] Ppi Pointer to the PPI data associated with this
> function.
> +
> + @retval EFI_SUCCESS The function completes successfully
> + @retval Others Cannot initialize Nvme controller from given
> PCI_DEVICE_PPI
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NvmePciDevicePpiInstallationCallback (
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
> + IN VOID *Ppi
> + );
> +
> +/**
> + Callback for EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI installation.
> +
> + @param[in] PeiServices Pointer to PEI Services Table.
> + @param[in] NotifyDescriptor Pointer to the descriptor for the
> Notification
> + event that caused this function to execute.
> + @param[in] Ppi Pointer to the PPI data associated with this
> function.
> +
> + @retval EFI_SUCCESS The function completes successfully
> + @retval Others Cannot initialize Nvme controller from given
> EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NvmeHostControllerPpiInstallationCallback (
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
> + IN VOID *Ppi
> + );
> +
> #endif
> diff --git a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.inf
> b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.inf
> index 4dd6c5704fa3..ba6f1afbf168 100644
> --- a/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.inf
> +++ b/MdeModulePkg/Bus/Pci/NvmExpressPei/NvmExpressPei.inf
> @@ -44,6 +44,7 @@
>
> [LibraryClasses]
> DebugLib
> + DevicePathLib
> PeiServicesLib
> MemoryAllocationLib
> BaseMemoryLib
> @@ -56,6 +57,7 @@
> gEdkiiPeiNvmExpressHostControllerPpiGuid ## CONSUMES
> gEdkiiIoMmuPpiGuid ## CONSUMES
> gEfiEndOfPeiSignalPpiGuid ## CONSUMES
> + gEdkiiPeiPciDevicePpiGuid ## CONSUMES
> gEdkiiPeiNvmExpressPassThruPpiGuid ## SOMETIMES_PRODUCES
> gEfiPeiVirtualBlockIoPpiGuid ## SOMETIMES_PRODUCES
> gEfiPeiVirtualBlockIo2PpiGuid ## SOMETIMES_PRODUCES
> @@ -66,7 +68,6 @@
>
> [Depex]
> gEfiPeiMemoryDiscoveredPpiGuid AND
> - gEdkiiPeiNvmExpressHostControllerPpiGuid AND
> gEfiPeiMasterBootModePpiGuid
>
> [UserExtensions.TianoCore."ExtraFiles"]
> --
> 2.37.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#92948): https://edk2.groups.io/g/devel/message/92948
Mute This Topic: https://groups.io/mt/93340344/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list