[edk2-devel] [PATCH 3/3] MdeModulePkg/Bus/Pci/XhciDxe: Check port is compatible before getting PSIV
Wu, Hao A
hao.a.wu at intel.com
Wed Dec 21 00:49:25 UTC 2022
Merged via:
PR - https://github.com/tianocore/edk2/pull/3806
Commit - https://github.com/tianocore/edk2/commit/ec25e904c7da70302f2725e2005e3762f1ae891e
Best Regards,
Hao Wu
> -----Original Message-----
> From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Wu, Hao
> A
> Sent: Monday, December 19, 2022 3:46 PM
> To: devel at edk2.groups.io; Rhodes, Sean <sean at starlabs.systems>
> Subject: Re: [edk2-devel] [PATCH 3/3] MdeModulePkg/Bus/Pci/XhciDxe:
> Check port is compatible before getting PSIV
>
> Reviewed-by: Hao A Wu <hao.a.wu at intel.com>
>
> I will make minor modification to:
> * Function description comment
> * Input parameter name
> of XhcCheckUsbPortSpeedUsedPsic() to make the declaration (in .H) and the
> definition (in .C) match.
>
> Best Regards,
> Hao Wu
>
> > -----Original Message-----
> > From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Sean
> > Rhodes
> > Sent: Friday, December 16, 2022 4:58 PM
> > To: devel at edk2.groups.io
> > Cc: Rhodes, Sean <sean at starlabs.systems>
> > Subject: [edk2-devel] [PATCH 3/3] MdeModulePkg/Bus/Pci/XhciDxe: Check
> > port is compatible before getting PSIV
> >
> > On some platforms, including Sky Lake and Kaby Lake, the PSIV
> > (Protocol Speed ID Value) indices are shared between Protocol Speed ID
> > DWORD' in the extended capabilities registers for both USB2 (Full
> > Speed) and USB3 (Super Speed).
> >
> > An example can be found below:
> >
> > XhcCheckUsbPortSpeedUsedPsic: checking for USB2 ext caps
> > XhciPsivGetPsid: found 3 PSID entries
> > XhciPsivGetPsid: looking for port speed 1
> > XhciPsivGetPsid: PSIV 1 PSIE 2 PLT 0 PSIM 12
> > XhciPsivGetPsid: PSIV 2 PSIE 1 PLT 0 PSIM 1500
> > XhciPsivGetPsid: PSIV 3 PSIE 2 PLT 0 PSIM 480
> > XhcCheckUsbPortSpeedUsedPsic: checking for USB3 ext caps
> > XhciPsivGetPsid: found 3 PSID entries
> > XhciPsivGetPsid: looking for port speed 1
> > XhciPsivGetPsid: PSIV 1 PSIE 3 PLT 0 PSIM 5
> > XhciPsivGetPsid: PSIV 2 PSIE 3 PLT 0 PSIM 10
> > XhciPsivGetPsid: PSIV 34 PSIE 2 PLT 0 PSIM 1248
> >
> > The result is edk2 detecting USB2 devices as USB3 devices, which
> > consequently causes enumeration to fail.
> >
> > To avoid incorrect detection, check the Compatible Port Offset to find
> > the starting Port of Root Hubs that support the protocol.
> >
> > Signed-off-by: Sean Rhodes <sean at starlabs.systems>
> > ---
> > MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 2 +-
> > MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c | 35 +++++++++++++++++++++--
> > ---
> > MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h | 8 +++---
> > 3 files changed, 35 insertions(+), 10 deletions(-)
> >
> > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > index 8dd7a8fbb7..461b2cd9b5 100644
> > --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > @@ -405,7 +405,7 @@ XhcGetRootHubPortStatus (
> > // Section 7.2 xHCI Support Protocol Capability
> >
> > //
> >
> > if (PortSpeed > 0) {
> >
> > - PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc,
> > PortSpeed);
> >
> > + PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc,
> > PortSpeed, PortNumber);
> >
> > // If no match found in ext cap reg, fall back to PORTSC
> >
> > if (PortStatus->PortStatus == 0) {
> >
> > //
> >
> > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> > b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> > index 2b4a4b2444..5700fc5fb8 100644
> > --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> > @@ -636,6 +636,7 @@ XhcGetSupportedProtocolCapabilityAddr (
> > @param Xhc The XHCI Instance.
> >
> > @param ExtCapOffset The USB Major Version in xHCI Support Protocol
> > Capability Field
> >
> > @param PortSpeed The Port Speed Field in USB PortSc register
> >
> > + @param PortNumber The Port Number (0-indexed)
> >
> >
> >
> > @return The Protocol Speed ID (PSI) from xHCI Supported Protocol
> > capability register.
> >
> >
> >
> > @@ -644,12 +645,15 @@ UINT32
> > XhciPsivGetPsid (
> >
> > IN USB_XHCI_INSTANCE *Xhc,
> >
> > IN UINT32 ExtCapOffset,
> >
> > - IN UINT8 PortSpeed
> >
> > + IN UINT8 PortSpeed,
> >
> > + IN UINT8 PortNumber
> >
> > )
> >
> > {
> >
> > XHC_SUPPORTED_PROTOCOL_DW2 PortId;
> >
> > XHC_SUPPORTED_PROTOCOL_PROTOCOL_SPEED_ID Reg;
> >
> > UINT32 Count;
> >
> > + UINT32 MinPortIndex;
> >
> > + UINT32 MaxPortIndex;
> >
> >
> >
> > if ((Xhc == NULL) || (ExtCapOffset == 0xFFFFFFFF)) {
> >
> > return 0;
> >
> > @@ -663,6 +667,23 @@ XhciPsivGetPsid (
> > //
> >
> > PortId.Dword = XhcReadExtCapReg (Xhc, ExtCapOffset +
> > XHC_SUPPORTED_PROTOCOL_DW2_OFFSET);
> >
> >
> >
> > + //
> >
> > + // According to XHCI 1.1 spec November 2017, valid values
> >
> > + // for CompPortOffset are 1 to CompPortCount - 1.
> >
> > + //
> >
> > + // PortNumber is zero-indexed, so subtract 1.
> >
> > + //
> >
> > + if ((PortId.Data.CompPortOffset == 0) || (PortId.Data.CompPortCount
> > + ==
> > 0)) {
> >
> > + return 0;
> >
> > + }
> >
> > +
> >
> > + MinPortIndex = PortId.Data.CompPortOffset - 1;
> >
> > + MaxPortIndex = MinPortIndex + PortId.Data.CompPortCount - 1;
> >
> > +
> >
> > + if ((PortNumber < MinPortIndex) || (PortNumber > MaxPortIndex)) {
> >
> > + return 0;
> >
> > + }
> >
> > +
> >
> > for (Count = 0; Count < PortId.Data.Psic; Count++) {
> >
> > Reg.Dword = XhcReadExtCapReg (Xhc, ExtCapOffset +
> > XHC_SUPPORTED_PROTOCOL_PSI_OFFSET + (Count << 2));
> >
> > if (Reg.Data.Psiv == PortSpeed) {
> >
> > @@ -676,8 +697,9 @@ XhciPsivGetPsid (
> > /**
> >
> > Find PortSpeed value match case in XHCI Supported Protocol
> > Capability
> >
> >
> >
> > - @param Xhc The XHCI Instance.
> >
> > - @param PortSpeed The Port Speed Field in USB PortSc register
> >
> > + @param Xhc The XHCI Instance.
> >
> > + @param PortSpeed The Port Speed Field in USB PortSc register
> >
> > + @param PortNumber The Port Number (0-indexed)
> >
> >
> >
> > @return The USB Port Speed.
> >
> >
> >
> > @@ -685,7 +707,8 @@ XhciPsivGetPsid (
> > UINT16
> >
> > XhcCheckUsbPortSpeedUsedPsic (
> >
> > IN USB_XHCI_INSTANCE *Xhc,
> >
> > - IN UINT8 PortSpeed
> >
> > + IN UINT8 PortSpeed,
> >
> > + IN UINT8 PortNumber
> >
> > )
> >
> > {
> >
> > XHC_SUPPORTED_PROTOCOL_PROTOCOL_SPEED_ID SpField;
> >
> > @@ -703,7 +726,7 @@ XhcCheckUsbPortSpeedUsedPsic (
> > // PortSpeed definition when the Major Revision is 03h.
> >
> > //
> >
> > if (Xhc->Usb3SupOffset != 0xFFFFFFFF) {
> >
> > - SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset, PortSpeed);
> >
> > + SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset,
> > + PortSpeed,
> > PortNumber);
> >
> > if (SpField.Dword != 0) {
> >
> > //
> >
> > // Found the corresponding PORTSC value in PSIV field of USB3 offset.
> >
> > @@ -717,7 +740,7 @@ XhcCheckUsbPortSpeedUsedPsic (
> > // PortSpeed definition when the Major Revision is 02h.
> >
> > //
> >
> > if ((UsbSpeedIdMap == 0) && (Xhc->Usb2SupOffset != 0xFFFFFFFF)) {
> >
> > - SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb2SupOffset, PortSpeed);
> >
> > + SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb2SupOffset,
> > + PortSpeed,
> > PortNumber);
> >
> > if (SpField.Dword != 0) {
> >
> > //
> >
> > // Found the corresponding PORTSC value in PSIV field of USB2 offset.
> >
> > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> > b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> > index 5fe2ba4f0e..2e4f95f8ac 100644
> > --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> > @@ -623,8 +623,9 @@ XhcGetSupportedProtocolCapabilityAddr (
> > /**
> >
> > Find SpeedField value match with Port Speed ID value.
> >
> >
> >
> > - @param Xhc The XHCI Instance.
> >
> > - @param Speed The Port Speed filed in USB PortSc register
> >
> > + @param Xhc The XHCI Instance.
> >
> > + @param Speed The Port Speed filed in USB PortSc register
> >
> > + @param PortNumber The Port Number (0-indexed)
> >
> >
> >
> > @return The USB Port Speed.
> >
> >
> >
> > @@ -632,7 +633,8 @@ XhcGetSupportedProtocolCapabilityAddr (
> > UINT16
> >
> > XhcCheckUsbPortSpeedUsedPsic (
> >
> > IN USB_XHCI_INSTANCE *Xhc,
> >
> > - IN UINT8 Speed
> >
> > + IN UINT8 Speed,
> >
> > + IN UINT8 PortNumber
> >
> > );
> >
> >
> >
> > #endif
> >
> > --
> > 2.37.2
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#97497):
> > https://edk2.groups.io/g/devel/message/97497
> > Mute This Topic: https://groups.io/mt/95706436/1768737
> > Group Owner: devel+owner at edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub [hao.a.wu at intel.com]
> > -=-=-=-=-=-=
> >
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#97640): https://edk2.groups.io/g/devel/message/97640
Mute This Topic: https://groups.io/mt/95706436/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list