[edk2-devel] [PATCH 2/3] MdeModulePkg/Usb: Read a large number of blocks

[Wu, Hao A]

Reviewed-by: Hao A Wu <hao.a.wu at intel.com>

Best Regards,
Hao Wu

> -----Original Message-----
> From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Chang,
> Abner via groups.io
> Sent: Wednesday, December 21, 2022 11:42 PM
> To: devel at edk2.groups.io
> Cc: Wu, Hao A <hao.a.wu at intel.com>; Ni, Ray <ray.ni at intel.com>; Garrett
> Kirkendall <garrett.kirkendall at amd.com>; Abner Chang
> <abner.chang at amd.com>; Kuei-Hung Lin <Kuei-Hung.Lin at amd.com>
> Subject: [edk2-devel] [PATCH 2/3] MdeModulePkg/Usb: Read a large number
> of blocks
> 
> From: Abner Chang <abner.chang at amd.com>
> 
> Changes to allow reading blocks that greater than 65535 sectors.
> 
> Signed-off-by: Jiangang He <jiangang.he at amd.com>
> Cc: Hao A Wu <hao.a.wu at intel.com>
> Cc: Ray Ni <ray.ni at intel.com>
> Cc: Garrett Kirkendall <garrett.kirkendall at amd.com>
> Cc: Abner Chang <abner.chang at amd.com>
> Cc: Kuei-Hung Lin <Kuei-Hung.Lin at amd.com>
> ---
>  MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c | 25 +++++++++++------------
>  1 file changed, 12 insertions(+), 13 deletions(-)
> 
> diff --git a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c
> b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c
> index 422ac5fec99..5111e4579e2 100644
> --- a/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c
> +++ b/MdeModulePkg/Bus/Usb/UsbBotPei/PeiAtapi.c
> @@ -2,6 +2,7 @@
>  Pei USB ATAPI command implementations.
> 
>  Copyright (c) 1999 - 2018, Intel Corporation. All rights reserved.<BR>
> +Copyright (C) 2022 Advanced Micro Devices, Inc. All rights reserved.<BR>
> 
>  SPDX-License-Identifier: BSD-2-Clause-Patent
> 
> @@ -382,14 +383,14 @@ PeiUsbRead10 (
>    ATAPI_PACKET_COMMAND  Packet;
>    ATAPI_READ10_CMD      *Read10Packet;
>    UINT16                MaxBlock;
> -  UINT16                BlocksRemaining;
> -  UINT16                SectorCount;
> +  UINT32                BlocksRemaining;
> +  UINT32                SectorCount;
>    UINT32                Lba32;
>    UINT32                BlockSize;
>    UINT32                ByteCount;
>    VOID                  *PtrBuffer;
>    EFI_STATUS            Status;
> -  UINT16                TimeOut;
> +  UINT32                TimeOut;
> 
>    //
>    // prepare command packet for the Inquiry Packet Command.
> @@ -401,16 +402,13 @@ PeiUsbRead10 (
> 
>    BlockSize = (UINT32)PeiBotDevice->Media.BlockSize;
> 
> -  MaxBlock        = (UINT16)(65535 / BlockSize);
> -  BlocksRemaining = (UINT16)NumberOfBlocks;
> +  MaxBlock = (UINT16)(MAX_UINT16 / BlockSize);
> +  ASSERT (NumberOfBlocks < MAX_UINT32);
> +  BlocksRemaining = (UINT32)NumberOfBlocks;
> 
>    Status = EFI_SUCCESS;
>    while (BlocksRemaining > 0) {
> -    if (BlocksRemaining <= MaxBlock) {
> -      SectorCount = BlocksRemaining;
> -    } else {
> -      SectorCount = MaxBlock;
> -    }
> +    SectorCount = MIN (BlocksRemaining, MaxBlock);
> 
>      //
>      // fill the Packet data structure
> @@ -435,7 +433,7 @@ PeiUsbRead10 (
> 
>      ByteCount = SectorCount * BlockSize;
> 
> -    TimeOut = (UINT16)(SectorCount * 2000);
> +    TimeOut = SectorCount * 2000;
> 
>      //
>      // send command packet
> @@ -448,16 +446,17 @@ PeiUsbRead10 (
>                 (VOID *)PtrBuffer,
>                 ByteCount,
>                 EfiUsbDataIn,
> -               TimeOut
> +               (UINT16)MIN (TimeOut, MAX_UINT16)
>                 );
> 
>      if (Status != EFI_SUCCESS) {
>        return Status;
>      }
> 
> +    ASSERT (Lba32 <= (MAX_UINT32-SectorCount));
>      Lba32          += SectorCount;
>      PtrBuffer       = (UINT8 *)PtrBuffer + SectorCount * BlockSize;
> -    BlocksRemaining = (UINT16)(BlocksRemaining - SectorCount);
> +    BlocksRemaining = BlocksRemaining - SectorCount;
>    }
> 
>    return Status;
> --
> 2.37.1.windows.1
> 
> 
> 
> 
> 



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#97725): https://edk2.groups.io/g/devel/message/97725
Mute This Topic: https://groups.io/mt/95808341/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-