[edk2-devel] [PATCH v4 1/8] OvmfPkg/Library: Create base HardwareInfoLib for PCI Host Bridges
Ojeda Leon, Nicolas via groups.io
ncoleon=amazon.com at groups.io
Thu Feb 3 20:56:21 UTC 2022
Create the Hardware Info library base together with the specifics to
describe PCI Host Bridges.
The Hardware Info library is intended to be used for disclosing
non-discoverable hardware information from the host to the guest in
Ovmf platforms. Core functionality will provide the possibility to
parse information from a generic BLOB into runtime structures. The
library is conceived in a generic way so that further hardware
elements can also be described using it. For such purpose the length
of the BLOB is not restricted but instead regarded as a sequence of
header-info elements that allow the parsing during runtime. The first
type of hardware defined will be PCI host bridges, providing the
possibility to define multiple and specify the resources each of them
can use. This enables the guest firmware to configure PCI resources
properly. Having the size of each individual element favors the reuse
of a single interface to convey descriptions of an arbitrary number
of heterogenous hardware elements. Furthermore, flexible access
mechanisms coupled with the size will grant the possibility of
interpreting them in a single run.
Define the base types of the generic Hardware Info library to parse
heterogeneous data. Also provide the specific changes to support
PCI host bridges as the first hardware type supported by the
library.
Additionally, define the HOST_BRIDGE_INFO structure to describe PCI
host bridges along with the functionality to parse such information
into proper structures used by the PCI driver in a centralized manner
and taking care of versioning.
As an example and motivation, the library will be used to define
multiple PCI host bridges for complex platforms that require it.
The first means of transportation that will be used is going to be
fw-cfg, over which a stream of bytes will be transferred and later
parsed by the hardware info library. Accordingly, the PCI driver
will make use of these host bridges definitions to populate the
list of Root Bridges and proceed with the configuration and discovery
of underlying hardware components.
As mentioned before, the binary data to be parsed by the Hardware
Info library should be organized as a sequence of Header-element
pairs in which the header describes the type and size of the associated
element that comes right after it. As an illustration, to provide
inforation of 3 host bridges the data, conceptually, would look
like this:
Header PCI Host Bridge (type and size) # 1
PCI Host Bridge info # 1
Header PCI Host Bridge (type and size) # 2
PCI Host Bridge info # 2
Header PCI Host Bridge (type and size) # 3
PCI Host Bridge info # 3
Cc: Alexander Graf <graf at amazon.de>
Cc: Gerd Hoffmann <kraxel at redhat.com>
Acked-by: Gerd Hoffmann <kraxel at redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon at amazon.com>
---
Notes:
v4:
- Minor change in InvalidateRootBridgeAperture to always set the
invalid base address to MAX_UINT64, thus having a universal
invalid value.
.../HardwareInfoPciHostBridgeLib.c | 514 ++++++++++++++++++
.../HardwareInfoPciHostBridgeLib.h | 262 +++++++++
.../HardwareInfoLib/HardwareInfoTypesLib.h | 64 +++
3 files changed, 840 insertions(+)
create mode 100644 OvmfPkg/Library/HardwareInfoLib/HardwareInfoPciHostBridgeLib.c
create mode 100644 OvmfPkg/Library/HardwareInfoLib/HardwareInfoPciHostBridgeLib.h
create mode 100644 OvmfPkg/Library/HardwareInfoLib/HardwareInfoTypesLib.h
diff --git a/OvmfPkg/Library/HardwareInfoLib/HardwareInfoPciHostBridgeLib.c b/OvmfPkg/Library/HardwareInfoLib/HardwareInfoPciHostBridgeLib.c
new file mode 100644
index 0000000000..43a8d233ab
--- /dev/null
+++ b/OvmfPkg/Library/HardwareInfoLib/HardwareInfoPciHostBridgeLib.c
@@ -0,0 +1,514 @@
+/**@file
+ Hardware info library with types and accessors to parse information about
+ PCI host bridges.
+
+ Copyright 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ **/
+
+#include <Library/DebugLib.h>
+
+#include "HardwareInfoPciHostBridgeLib.h"
+
+#define IS_RANGE_INVALID(Start, Size, MaxValue) (Start >= MaxValue || Size == 0)
+
+/**
+ Calculate the last (inclusive) address of a range.
+
+ @param[in] Start First address of the range
+ @param[in] Size Size of the range
+ @return Last address of the range
+**/
+STATIC
+UINT64
+GetRangeEnd (
+ IN UINT64 Start,
+ IN UINT64 Size,
+ IN UINT64 MaxValue
+ )
+{
+ if (IS_RANGE_INVALID (Start, Size, MaxValue)) {
+ return 0;
+ }
+
+ return Start + Size - 1;
+}
+
+/**
+ Internal helper to update LastAddress if the Limit address
+ of the Mem aperture is higher than the provided value.
+
+ @param[in] Mem Pointer to aperture whose limit is
+ to be compared against accumulative
+ last address.
+ @param[out] LastAddress Pointer to accumulative last address
+ to be updated if Limit is higher
+**/
+STATIC
+VOID
+UpdateLastAddressIfHigher (
+ IN PCI_ROOT_BRIDGE_APERTURE *Mem,
+ OUT UINT64 *LastAddress
+ )
+{
+ if (Mem->Limit > *LastAddress) {
+ *LastAddress = Mem->Limit;
+ }
+}
+
+EFI_STATUS
+HardwareInfoPciHostBridgeLastMmioAddress (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ IN BOOLEAN HighMem,
+ OUT UINT64 *LastMmioAddress
+ )
+{
+ EFI_STATUS Status;
+ PCI_ROOT_BRIDGE_APERTURE Mem;
+ PCI_ROOT_BRIDGE_APERTURE MemAbove4G;
+ PCI_ROOT_BRIDGE_APERTURE PMem;
+ PCI_ROOT_BRIDGE_APERTURE PMemAbove4G;
+
+ if (LastMmioAddress == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Set the output to the lowest possible value so that if some step fails
+ // the overall outcome reflects no information found
+ //
+ *LastMmioAddress = 0;
+
+ Status = HardwareInfoPciHostBridgeGetApertures (
+ HostBridge,
+ DataSize,
+ NULL,
+ &Mem,
+ &MemAbove4G,
+ &PMem,
+ &PMemAbove4G,
+ NULL
+ );
+
+ //
+ // Forward error to caller but ignore warnings given that, very likely,
+ // the host bridge will have a PIO aperture we are explicitly
+ // ignoring here since we care only about MMIO resources.
+ //
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (HighMem) {
+ UpdateLastAddressIfHigher (&MemAbove4G, LastMmioAddress);
+ UpdateLastAddressIfHigher (&PMemAbove4G, LastMmioAddress);
+ } else {
+ UpdateLastAddressIfHigher (&Mem, LastMmioAddress);
+ UpdateLastAddressIfHigher (&PMem, LastMmioAddress);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Set the boundaries of an aperture to invalid values having
+ size zero and start MaxValue (yields Start > Limit which
+ depicts an invalid range)
+
+ @param[in] MaxValue Max value of the aperture's range (depends
+ on the data type)
+ @param[out] Aperture Aperture object to invalidate
+**/
+STATIC
+VOID
+InvalidateRootBridgeAperture (
+ OUT PCI_ROOT_BRIDGE_APERTURE *Aperture
+ )
+{
+ if (Aperture == NULL) {
+ return;
+ }
+
+ Aperture->Base = MAX_UINT64;
+ Aperture->Limit = 0;
+}
+
+/**
+ Fill a PCI ROOT BRIDGE APERTURE with the proper values calculated
+ from the provided start and size.
+
+ @param[in] Start Start address of the aperture
+ @param[in] Size Size, in bytes, of the aperture
+ @param[in] MaxValue Max value a valid address could take and which
+ represents an invalid start address.
+ @param[out] Aperture Pointer to the aperture to be filled
+
+ @retval EFI_SUCCESS Aperture was filled successfully
+ @retval EFI_INVALID_PARAMETER Range depicted by Start and Size is
+ valid but ignored because aperture
+ pointer is NULL
+ @retval EFI_WARN_BUFFER_TOO_SMALL Aperture pointer is invalid but the
+ range also is so no harm.
+**/
+STATIC
+EFI_STATUS
+FillHostBridgeAperture (
+ IN UINT64 Start,
+ IN UINT64 Size,
+ IN UINT64 MaxValue,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Aperture
+ )
+{
+ UINT64 End;
+
+ End = GetRangeEnd (Start, Size, MaxValue);
+
+ if (Aperture == NULL) {
+ if (!IS_RANGE_INVALID (Start, Size, MaxValue)) {
+ //
+ // Report an error to the caller since the range specified in
+ // the host bridge's resources is non-empty but the provided
+ // aperture pointer is null, thus the valid range is ignored.
+ //
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_WARN_BUFFER_TOO_SMALL;
+ }
+
+ if (IS_RANGE_INVALID (Start, Size, MaxValue)) {
+ //
+ // Fill Aperture with invalid range values to signal the
+ // absence of an address space (empty range)
+ //
+ InvalidateRootBridgeAperture (Aperture);
+ } else {
+ Aperture->Base = Start;
+ Aperture->Limit = End;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Merge 2 ranges (normal and prefetchable) into a single aperture
+ comprehending the addresses encompassed by both of them. If both
+ ranges are not empty they must be contiguous for correctness.
+
+ @param[in] Start Range start address
+ @param[in] Size Range size in bytes
+ @param[in] PStart Prefetchable range start address
+ @param[in] PSize Prefetchable range size in bytes
+ @param[in] MaxValue Max value a valid address could take and which
+ represents an invalid start address.
+ @param[out] Aperture Pointer to the aperture to be filled
+
+ @retval EFI_SUCCESS Aperture was filled successfully
+ @retval EFI_INVALID_PARAMETER Either range depicted by Start, Size
+ or PStart, PSize or both are valid
+ but ignored because aperture pointer
+ is NULL
+ @retval EFI_WARN_BUFFER_TOO_SMALL Aperture pointer is invalid but both
+ ranges are too so no harm.
+**/
+STATIC
+EFI_STATUS
+MergeHostBridgeApertures (
+ IN UINT64 Start,
+ IN UINT64 Size,
+ IN UINT64 PStart,
+ IN UINT64 PSize,
+ IN UINT64 MaxValue,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Aperture
+ )
+{
+ UINT64 PEnd;
+
+ if (Aperture == NULL) {
+ if (!IS_RANGE_INVALID (Start, Size, MaxValue) ||
+ !IS_RANGE_INVALID (PStart, PSize, MaxValue))
+ {
+ //
+ // Report an error to the caller since the range specified in
+ // the host bridge's resources is non-empty but the provided
+ // aperture pointer is null, thus the valid range is ignored.
+ //
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_WARN_BUFFER_TOO_SMALL;
+ }
+
+ //
+ // Start from an empty range (Limit < Base)
+ //
+ InvalidateRootBridgeAperture (Aperture);
+
+ if (!IS_RANGE_INVALID (Start, Size, MaxValue)) {
+ Aperture->Base = Start;
+ Aperture->Limit = Start + Size - 1;
+ }
+
+ if (!IS_RANGE_INVALID (PStart, PSize, MaxValue)) {
+ PEnd = PStart + PSize - 1;
+
+ if (PStart < Aperture->Base) {
+ Aperture->Base = PStart;
+ }
+
+ if (PEnd > Aperture->Limit) {
+ Aperture->Limit = PEnd;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+HardwareInfoPciHostBridgeGetBusNrRange (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ OUT UINTN *BusNrStart,
+ OUT UINTN *BusNrLast
+ )
+{
+ if ((HostBridge == NULL) || (DataSize == 0) ||
+ (BusNrStart == NULL) || (BusNrLast == NULL))
+ {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For now only version 0 is supported
+ //
+ if (HostBridge->Version != 0) {
+ return EFI_INCOMPATIBLE_VERSION;
+ }
+
+ *BusNrStart = HostBridge->BusNrStart;
+ *BusNrLast = HostBridge->BusNrLast;
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+HardwareInfoPciHostBridgeGetApertures (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Io,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Mem,
+ OUT PCI_ROOT_BRIDGE_APERTURE *MemAbove4G,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PMem,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PMemAbove4G,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PcieConfig
+ )
+{
+ EFI_STATUS Status;
+ BOOLEAN StickyError;
+
+ StickyError = FALSE;
+ if ((HostBridge == NULL) || (DataSize == 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For now only version 0 is supported
+ //
+ if (HostBridge->Version != 0) {
+ return EFI_INCOMPATIBLE_VERSION;
+ }
+
+ Status = FillHostBridgeAperture (
+ HostBridge->IoStart,
+ HostBridge->IoSize,
+ MAX_UINT32,
+ Io
+ );
+ StickyError |= EFI_ERROR (Status);
+
+ Status = FillHostBridgeAperture (
+ HostBridge->PcieConfigStart,
+ HostBridge->PcieConfigSize,
+ MAX_UINT64,
+ PcieConfig
+ );
+ StickyError |= EFI_ERROR (Status);
+
+ if (HostBridge->Flags.Bits.CombineMemPMem) {
+ Status = MergeHostBridgeApertures (
+ HostBridge->MemStart,
+ HostBridge->MemSize,
+ HostBridge->PMemStart,
+ HostBridge->PMemSize,
+ MAX_UINT32,
+ Mem
+ );
+ StickyError |= EFI_ERROR (Status);
+
+ Status = MergeHostBridgeApertures (
+ HostBridge->MemAbove4GStart,
+ HostBridge->MemAbove4GSize,
+ HostBridge->PMemAbove4GStart,
+ HostBridge->PMemAbove4GSize,
+ MAX_UINT64,
+ MemAbove4G
+ );
+ StickyError |= EFI_ERROR (Status);
+
+ //
+ // Invalidate unused apertures
+ //
+ InvalidateRootBridgeAperture (PMem);
+ InvalidateRootBridgeAperture (PMemAbove4G);
+ } else {
+ Status = FillHostBridgeAperture (
+ HostBridge->MemStart,
+ HostBridge->MemSize,
+ MAX_UINT32,
+ Mem
+ );
+ StickyError |= EFI_ERROR (Status);
+
+ Status = FillHostBridgeAperture (
+ HostBridge->PMemStart,
+ HostBridge->PMemSize,
+ MAX_UINT32,
+ PMem
+ );
+ StickyError |= EFI_ERROR (Status);
+
+ Status = FillHostBridgeAperture (
+ HostBridge->MemAbove4GStart,
+ HostBridge->MemAbove4GSize,
+ MAX_UINT64,
+ MemAbove4G
+ );
+ StickyError |= EFI_ERROR (Status);
+
+ Status = FillHostBridgeAperture (
+ HostBridge->PMemAbove4GStart,
+ HostBridge->PMemAbove4GSize,
+ MAX_UINT64,
+ PMem
+ );
+ StickyError |= EFI_ERROR (Status);
+ }
+
+ if (StickyError) {
+ //
+ // If any function returned an error it is due to a valid range
+ // specified in the host bridge that was ignored due to a NULL
+ // pointer. Translate it to a warning to allow for calling with
+ // only a subset of the apertures.
+ //
+ return EFI_WARN_STALE_DATA;
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+HardwareInfoPciHostBridgeGetFlags (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ OUT UINT64 *Attributes OPTIONAL,
+ OUT BOOLEAN *DmaAbove4G OPTIONAL,
+ OUT BOOLEAN *NoExtendedConfigSpace OPTIONAL,
+ OUT BOOLEAN *CombineMemPMem OPTIONAL
+ )
+{
+ if ((HostBridge == NULL) || (DataSize == 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For now only version 0 is supported
+ //
+ if (HostBridge->Version != 0) {
+ return EFI_INCOMPATIBLE_VERSION;
+ }
+
+ if (Attributes) {
+ *Attributes = HostBridge->Attributes;
+ }
+
+ if (DmaAbove4G) {
+ *DmaAbove4G = !!HostBridge->Flags.Bits.DmaAbove4G;
+ }
+
+ if (NoExtendedConfigSpace) {
+ *NoExtendedConfigSpace = !!HostBridge->Flags.Bits.NoExtendedConfigSpace;
+ }
+
+ if (CombineMemPMem) {
+ *CombineMemPMem = !!HostBridge->Flags.Bits.CombineMemPMem;
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+HardwareInfoPciHostBridgeGet (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ OUT UINTN *BusNrStart,
+ OUT UINTN *BusNrLast,
+ OUT UINT64 *Attributes OPTIONAL,
+ OUT BOOLEAN *DmaAbove4G OPTIONAL,
+ OUT BOOLEAN *NoExtendedConfigSpace OPTIONAL,
+ OUT BOOLEAN *CombineMemPMem OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Io OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Mem OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *MemAbove4G OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PMem OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PMemAbove4G OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PcieConfig OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+
+ Status = HardwareInfoPciHostBridgeGetBusNrRange (
+ HostBridge,
+ DataSize,
+ BusNrStart,
+ BusNrLast
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = HardwareInfoPciHostBridgeGetFlags (
+ HostBridge,
+ DataSize,
+ Attributes,
+ DmaAbove4G,
+ NoExtendedConfigSpace,
+ CombineMemPMem
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = HardwareInfoPciHostBridgeGetApertures (
+ HostBridge,
+ DataSize,
+ Io,
+ Mem,
+ MemAbove4G,
+ PMem,
+ PMemAbove4G,
+ PcieConfig
+ );
+
+ return Status;
+}
diff --git a/OvmfPkg/Library/HardwareInfoLib/HardwareInfoPciHostBridgeLib.h b/OvmfPkg/Library/HardwareInfoLib/HardwareInfoPciHostBridgeLib.h
new file mode 100644
index 0000000000..397c8f8a5d
--- /dev/null
+++ b/OvmfPkg/Library/HardwareInfoLib/HardwareInfoPciHostBridgeLib.h
@@ -0,0 +1,262 @@
+/**@file
+ Hardware info library with types and accessors to parse information about
+ PCI host bridges.
+
+ Copyright 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ **/
+
+#ifndef __HARDWARE_INFO_PCI_HOST_BRIDGE_LIB_H__
+#define __HARDWARE_INFO_PCI_HOST_BRIDGE_LIB_H__
+
+#include <Uefi/UefiBaseType.h>
+#include <Uefi/UefiSpec.h>
+#include <Library/PciHostBridgeLib.h>
+
+//
+// Host Bridge resources information
+//
+#pragma pack(1)
+typedef struct {
+ //
+ // Feature tracking, initially 0
+ //
+ UINT64 Version;
+
+ //
+ // Host bridge enabled attributes (EFI_PCI_ATTRIBUTE_*)
+ //
+ UINT64 Attributes;
+
+ union {
+ UINT64 Uint64;
+ struct {
+ UINT64 DmaAbove4G : 1;
+ UINT64 NoExtendedConfigSpace : 1;
+ UINT64 CombineMemPMem : 1;
+ UINT64 Reserved : 61;
+ } Bits;
+ } Flags;
+
+ //
+ // Bus number range
+ //
+ UINT8 BusNrStart;
+ UINT8 BusNrLast;
+
+ UINT8 Padding[6];
+
+ //
+ // IO aperture
+ //
+ UINT64 IoStart;
+ UINT64 IoSize;
+
+ //
+ // 32-bit MMIO aperture
+ //
+ UINT64 MemStart;
+ UINT64 MemSize;
+
+ //
+ // 32-bit prefetchable MMIO aperture
+ //
+ UINT64 PMemStart;
+ UINT64 PMemSize;
+
+ //
+ // 64-bit MMIO aperture
+ //
+ UINT64 MemAbove4GStart;
+ UINT64 MemAbove4GSize;
+
+ //
+ // 64-bit prefetchable MMIO aperture
+ //
+ UINT64 PMemAbove4GStart;
+ UINT64 PMemAbove4GSize;
+
+ //
+ // MMIO accessible PCIe config space (ECAM)
+ //
+ UINT64 PcieConfigStart;
+ UINT64 PcieConfigSize;
+} HOST_BRIDGE_INFO;
+#pragma pack()
+
+/**
+ Extract the last MMIO address, either from high (64-bit) or low (32-bit)
+ memory used by the HostBridge's apertures.
+
+ @param[in] HostBridge Root bridge's resources specification
+ @param[in] DataSize Size in bytes of the actually filled
+ data available in the HostBridge object
+ @param[in] HighMem 64-bit (true) or 32-bit (false) MMIO
+ address
+ @param[out] LastMmioAddress Pointer to last MMIO address
+
+ @retval EFI_SUCCESS Operation succeeded
+ @retval EFI_INVALID_PARAMETER One or more pointer parameters are
+ invalid
+ @retval EFI_INCOMPATIBLE_VERSION HostBridge information belongs to
+ an unsupported version
+**/
+EFI_STATUS
+HardwareInfoPciHostBridgeLastMmioAddress (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ IN BOOLEAN HighMem,
+ OUT UINT64 *LastMmioAddress
+ );
+
+/**
+ Interpret the HostBridge resources and extact the bus number
+ range.
+
+ @param[in] HostBridge Root bridge's resources specification
+ @param[in] DataSize Size in bytes of the actually filled
+ data available in the HostBridge object
+ @param[out] BusNrStart Pointer to the Bus Number range start
+ @param[out] BusNrLast Pointer to the Bus Number range end
+
+ @retval EFI_SUCCESS Retrieved the bus number range
+ without any issues.
+ @retval EFI_INVALID_PARAMETER One of the parameters is invalid,
+ either NULL pointer or size 0
+ @retval EFI_INCOMPATIBLE_VERSION HostBridge data of unsupported
+ version
+**/
+EFI_STATUS
+HardwareInfoPciHostBridgeGetBusNrRange (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ OUT UINTN *BusNrStart,
+ OUT UINTN *BusNrLast
+ );
+
+/**
+ Interpret the MMIO resources in HostBridge and set the apertures
+ in 32-bit space (Mem), 64-bit space (MemAbove4G), PIO (IO) and
+ ECAM (PcieConfig) accordingly.
+
+ The 2 types of apertures in each MMIO space (prefetchable and
+ non-prefetchable) may be merged into a single window, hence if both
+ types of apertures are defined while the CombineMemPMem flag is set,
+ the ranges must be contiguous.
+
+ @param[in] HostBridge Root bridge's resources specification
+ @param[in] DataSize Size in bytes of the actually filled
+ data available in the HostBridge object
+ @param[out] Mem Pointer to 32-bit MMIO aperture
+ @param[out] MemAbove4G Pointer to 64-bit MMIO aperture
+ @param[out] PMem Pointer to the 32-bit prefetchable MMIO aperture
+ @param[out] PMemAbove4G Pointer to the 64-bit prefetchable MMIO aperture
+ @param[out] PcieConfig Pointer to MMIO mapped PCIe config aperture (ECAM)
+
+ @retval EFI_INVALID_PARAMETER HostBridge object is invalid
+ @retval EFI_INCOMPATIBLE_VERSION HostBridge information belongs to
+ an unsupported version
+ @retval EFI_WARN_STALE_DATA One or more valid aperture in the
+ HostBridge's resources were ignored
+ because corresponding aperture pointer
+ is NULL.
+ @retval EFI_SUCCESS Operation executed cleanly, all valid
+ ranges were parsed into the corresponding
+ aperture object.
+**/
+EFI_STATUS
+HardwareInfoPciHostBridgeGetApertures (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Io,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Mem,
+ OUT PCI_ROOT_BRIDGE_APERTURE *MemAbove4G,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PMem,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PMemAbove4G,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PcieConfig
+ );
+
+/**
+ Retrieve all flags and attributes of a host bridge describing the
+ resources and capabilities.
+
+ @param[in] HostBridge Host bridge information object
+ @param[in] DataSize Size in bytes of the actually filled
+ data available in the HostBridge object
+ @param[out] Attributes Pointer to the host bridge's attributes
+ @param[out] DmaAbove4G Pointer to the DMA Above 4G flag
+ @param[out] NoExtendedConfigSpace Pointer to the Extended Config Space flag
+ @param[out] CombineMemPMem Pointer to the Combine Mem and PMem flag
+
+ @retval EFI_INVALID_PARAMETER HostBridge object is invalid
+ @retval EFI_INCOMPATIBLE_VERSION HostBridge information belongs to
+ an unsupported version
+ @retval EFI_SUCCESS Operation executed cleanly
+**/
+EFI_STATUS
+HardwareInfoPciHostBridgeGetFlags (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ OUT UINT64 *Attributes OPTIONAL,
+ OUT BOOLEAN *DmaAbove4G OPTIONAL,
+ OUT BOOLEAN *NoExtendedConfigSpace OPTIONAL,
+ OUT BOOLEAN *CombineMemPMem OPTIONAL
+ );
+
+/**
+ Getter that parses information from a HOST_BRIDGE_INFO object
+ into smaller chunks of types handled by the PciHostBridgeLib.
+
+ @param[in] HostBridge Host bridge information object
+ @param[in] DataSize Size in bytes of the actually filled
+ data available in the HostBridge object
+ @param[out] BusNrStart Pointer to the Bus Number range start
+ @param[out] BusNrLast Pointer to the Bus Number range end
+ @param[out] Attributes Pointer to the host bridge's attributes
+ @param[out] DmaAbove4G Pointer to the DMA Above 4G flag
+ @param[out] NoExtendedConfigSpace Pointer to the Extended Config Space flag
+ @param[out] CombineMemPMem Pointer to the Combine Mem and PMem flag
+ @param[out] Io Pointer to the PIO aperture object
+ @param[out] Mem Pointer to the 32-bit MMIO aperture object
+ @param[out] MemAbove4G Pointer to the 64-bit MMIO aperture object
+ @param[out] PMem Pointer to the 32-bit prefetchable MMIO
+ aperture object
+ @param[out] PMemAbove4G Pointer to the 64-bit prefetchable MMIO
+ aperture object
+ @param[out] PcieConfig MMIO mapped PCIe config aperture (ECAM)
+
+ @retval EFI_SUCCESS Whole operation succeeded
+ @retval EFI_INVALID_PARAMETER HostBridge object and/or non-optional
+ output parameters are invalid
+ @retval EFI_INCOMPATIBLE_VERSION HostBridge information provided belongs to
+ and unsupported version
+ @retval EFI_WARN_STALE_DATA One or more apertures having valid ranges
+ in the HostBridge info were ignored because
+ the correspnding aperture pointer is NULL
+**/
+EFI_STATUS
+HardwareInfoPciHostBridgeGet (
+ IN CONST HOST_BRIDGE_INFO *HostBridge,
+ IN UINTN DataSize,
+ OUT UINTN *BusNrStart,
+ OUT UINTN *BusNrLast,
+ OUT UINT64 *Attributes OPTIONAL,
+ OUT BOOLEAN *DmaAbove4G OPTIONAL,
+ OUT BOOLEAN *NoExtendedConfigSpace OPTIONAL,
+ OUT BOOLEAN *CombineMemPMem OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Io OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *Mem OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *MemAbove4G OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PMem OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PMemAbove4G OPTIONAL,
+ OUT PCI_ROOT_BRIDGE_APERTURE *PcieConfig OPTIONAL
+ );
+
+#endif // __HARDWARE_INFO_PCI_HOST_BRIDGE_LIB_H__
diff --git a/OvmfPkg/Library/HardwareInfoLib/HardwareInfoTypesLib.h b/OvmfPkg/Library/HardwareInfoLib/HardwareInfoTypesLib.h
new file mode 100644
index 0000000000..84edd1c6ac
--- /dev/null
+++ b/OvmfPkg/Library/HardwareInfoLib/HardwareInfoTypesLib.h
@@ -0,0 +1,64 @@
+/**@file
+ Hardware info types' definitions.
+
+ General hardware info types to parse the binary data
+
+ Copyright 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ **/
+
+#ifndef __HARDWARE_INFO_TYPES_LIB_H__
+#define __HARDWARE_INFO_TYPES_LIB_H__
+
+// Specific hardware types:
+#include "HardwareInfoPciHostBridgeLib.h"
+
+//
+// Hardware info types enumeration listing the supported
+// types which have an associated type definition
+//
+typedef enum {
+ HardwareInfoTypeUndefined = 0,
+ HardwareInfoTypeHostBridge = 1,
+} HARDWARE_INFO_TYPE;
+
+//
+// Header format preceding and describing an associated hardware
+// info element
+//
+#pragma pack(1)
+typedef struct {
+ union {
+ UINT64 Uint64;
+ HARDWARE_INFO_TYPE Value;
+ } Type;
+ UINT64 Size;
+} HARDWARE_INFO_HEADER;
+#pragma pack()
+
+//
+// Generic data structure to access any supported hardware type
+// resource definition
+//
+#pragma pack(1)
+typedef struct {
+ LIST_ENTRY Link;
+ HARDWARE_INFO_HEADER Header;
+ union {
+ UINT8 *Raw;
+ HOST_BRIDGE_INFO *PciHostBridge;
+ } Data;
+} HARDWARE_INFO;
+#pragma pack()
+
+#define HARDWARE_INFO_FROM_LINK(a) \
+ BASE_CR (a, HARDWARE_INFO, Link)
+
+#endif // __HARDWARE_INFO_TYPES_LIB_H__
--
2.17.1
Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Jonathan Weiss
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#86378): https://edk2.groups.io/g/devel/message/86378
Mute This Topic: https://groups.io/mt/88892980/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list