[edk2-devel] [AddResetEnd v1] ShellPkg/DpDynamicCommand: Add ResetEnd support in DP command

[Gao, Zhichao]

Reviewed-by: Zhichao Gao <zhichao.gao at intel.com>

Thanks,
Zhichao

> -----Original Message-----
> From: Yang, Zhenhua <zhenhua.yang at intel.com>
> Sent: Monday, November 21, 2022 5:35 PM
> To: devel at edk2.groups.io
> Cc: Ni, Ray <ray.ni at intel.com>; Gao, Zhichao <zhichao.gao at intel.com>; Zeng,
> Star <star.zeng at intel.com>
> Subject: [AddResetEnd v1] ShellPkg/DpDynamicCommand: Add ResetEnd
> support in DP command
> 
> From: zhenhuay <zhenhua.yang at intel.com>
> 
> DP command should be able to parse the FPDT ACPI table and dump the
> ResetEnd which was logged at the beginning of the firmware image
> execution. So that DP can calculate SEC phase time duration start from the
> beginning of firmware image execution.
> 
> Cc: Ray Ni <ray.ni at intel.com>
> Cc: Zhichao Gao <zhichao.gao at intel.com>
> Cc: Star Zeng <star.zeng at intel.com>
> Signed-off-by: zhenhuay <zhenhua.yang at intel.com>
> ---
>  ShellPkg/DynamicCommand/DpDynamicCommand/Dp.c         | 14
> ++++++++++++++
>  ShellPkg/DynamicCommand/DpDynamicCommand/DpTrace.c    |  9
> +++++++++
>  ShellPkg/DynamicCommand/DpDynamicCommand/Dp.uni       |  1 +
>  ShellPkg/DynamicCommand/DpDynamicCommand/DpInternal.h |  1 +
>  4 files changed, 25 insertions(+)
> 
> diff --git a/ShellPkg/DynamicCommand/DpDynamicCommand/Dp.c
> b/ShellPkg/DynamicCommand/DpDynamicCommand/Dp.c
> index 1799ab176a..512a146da6 100644
> --- a/ShellPkg/DynamicCommand/DpDynamicCommand/Dp.c
> +++ b/ShellPkg/DynamicCommand/DpDynamicCommand/Dp.c
> @@ -57,6 +57,7 @@ UINT8    *mBootPerformanceTable;
>  UINTN    mBootPerformanceTableSize; BOOLEAN  mPeiPhase = FALSE;
> BOOLEAN  mDxePhase = FALSE;+UINT64   mResetEnd = 0;
> PERF_SUMMARY_DATA   SummaryData       = { 0 }; ///< Create the
> SummaryData structure and init. to ZERO. MEASUREMENT_RECORD
> *mMeasurementList = NULL;@@ -542,6 +543,8 @@ BuildMeasurementList (
>  {   EFI_ACPI_5_0_FPDT_PERFORMANCE_RECORD_HEADER  *RecordHeader;
> UINT8                                        *PerformanceTablePtr;+  UINT8
> *BasicBootTablePtr;+  UINT64                                       ResetEnd;   UINT16
> StartProgressId;   UINTN                                        TableLength;   UINT8
> *StartRecordEvent;@@ -552,6 +555,17 @@ BuildMeasurementList (
>      return EFI_OUT_OF_RESOURCES;   } +  //+  // Update the ResetEnd which
> was logged at the beginning of firmware image execution+  //+  TableLength
> = sizeof (EFI_ACPI_5_0_FPDT_PERFORMANCE_TABLE_HEADER);+
> BasicBootTablePtr = (mBootPerformanceTable + TableLength);+  ResetEnd
> = ((EFI_ACPI_5_0_FPDT_FIRMWARE_BASIC_BOOT_RECORD
> *)BasicBootTablePtr)->ResetEnd;++  if (ResetEnd > 0) {+    mResetEnd =
> ResetEnd;+  }+   TableLength         = sizeof (BOOT_PERFORMANCE_TABLE);
> PerformanceTablePtr = (mBootPerformanceTable + TableLength); diff --git
> a/ShellPkg/DynamicCommand/DpDynamicCommand/DpTrace.c
> b/ShellPkg/DynamicCommand/DpDynamicCommand/DpTrace.c
> index 0abb8797ec..9c0a9a06a1 100644
> --- a/ShellPkg/DynamicCommand/DpDynamicCommand/DpTrace.c
> +++ b/ShellPkg/DynamicCommand/DpDynamicCommand/DpTrace.c
> @@ -548,6 +548,15 @@ ProcessPhases (
>     Total = 0; +  // print Reset End if it's valid+  //+  if (SecTime > mResetEnd) {+
> SecTime     = SecTime - mResetEnd;                // Calculate sec time duration
> start from the beginning of firmware image execution+    ElapsedTime =
> DurationInMicroSeconds (mResetEnd); // Calculate elapsed time in
> microseconds+    Total      += DivU64x32 (ElapsedTime, 1000);      // Accumulate
> time in milliseconds+    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN
> (STR_DP_RESET_END), mDpHiiHandle, ElapsedTime);+  }+   // print SEC phase
> duration time   //   if (SecTime > 0) {diff --git
> a/ShellPkg/DynamicCommand/DpDynamicCommand/Dp.uni
> b/ShellPkg/DynamicCommand/DpDynamicCommand/Dp.uni
> index 8d8700573e..ef2e7708b8 100644
> --- a/ShellPkg/DynamicCommand/DpDynamicCommand/Dp.uni
> +++ b/ShellPkg/DynamicCommand/DpDynamicCommand/Dp.uni
> @@ -41,6 +41,7 @@
>  #string STR_DP_TIMER_PROPERTIES        #language en-US  "System
> Performance Timer counts %s from 0x%Lx to 0x%Lx\n" #string
> STR_DP_VERBOSE_THRESHOLD       #language en-US  "Measurements less
> than %,Ld microseconds are not displayed.\n" #string
> STR_DP_SECTION_PHASES          #language en-US  "Major Phases"+#string
> STR_DP_RESET_END               #language en-US  "  Reset End:               %L8d
> (us)\n" #string STR_DP_SEC_PHASE               #language en-US  "  SEC Phase
> Duration:      %L8d (us)\n" #string STR_DP_PHASE_BDSTO             #language
> en-US  "         BDS Timeout:   %L8d (ms) included in BDS Duration\n" #string
> STR_DP_PHASE_DURATION          #language en-US  "%5a Phase
> Duration:   %L8d (ms)\n"diff --git
> a/ShellPkg/DynamicCommand/DpDynamicCommand/DpInternal.h
> b/ShellPkg/DynamicCommand/DpDynamicCommand/DpInternal.h
> index 39878c6085..97f47f2960 100644
> --- a/ShellPkg/DynamicCommand/DpDynamicCommand/DpInternal.h
> +++ b/ShellPkg/DynamicCommand/DpDynamicCommand/DpInternal.h
> @@ -28,6 +28,7 @@ extern UINT8               *mBootPerformanceTable;
>  extern UINTN               mBootPerformanceTableLength; extern
> MEASUREMENT_RECORD  *mMeasurementList; extern UINTN
> mMeasurementNum;+extern UINT64              mResetEnd;  extern
> PERF_SUMMARY_DATA  SummaryData;    ///< Create the SummaryData
> structure and init. to ZERO. --
> 2.31.1.windows.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#96622): https://edk2.groups.io/g/devel/message/96622
Mute This Topic: https://groups.io/mt/95182514/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-