[edk2-devel] [edk2-platforms][PATCH V1 09/16] Platform/Loongson: Add PciCpuIoDxe driver.
xianglai
lixianglai at loongson.cn
Fri Sep 9 03:12:05 UTC 2022
Add PCI CpuIo protocol.there is no fix translation
offset between I/O port accesses and MMIO accesses.
Add PciCpuIo2Dxe driver to implement EFI_CPU_IO2_PROTOCOL
to add the translation for IO access.
Signed-off-by: xianglai li <lixianglai at loongson.cn>
---
.../Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c | 548 ++++++++++++++++++
.../Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h | 219 +++++++
.../Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf | 40 ++
3 files changed, 807 insertions(+)
create mode 100644 Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c
create mode 100644 Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h
create mode 100644 Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf
diff --git a/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c
new file mode 100644
index 0000000000..f5154eea7a
--- /dev/null
+++ b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c
@@ -0,0 +1,548 @@
+/** @file
+ Produces the CPU I/O 2 Protocol.
+
+ Copyright (c) 2021 Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <PiDxe.h>
+
+#include <Protocol/CpuIo2.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include "PciCpuIo2Dxe.h"
+
+//
+// Handle for the CPU I/O 2 Protocol
+//
+STATIC EFI_HANDLE mHandle = NULL;
+
+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mInStride[] = {
+ 1, // EfiCpuIoWidthUint8
+ 2, // EfiCpuIoWidthUint16
+ 4, // EfiCpuIoWidthUint32
+ 8, // EfiCpuIoWidthUint64
+ 0, // EfiCpuIoWidthFifoUint8
+ 0, // EfiCpuIoWidthFifoUint16
+ 0, // EfiCpuIoWidthFifoUint32
+ 0, // EfiCpuIoWidthFifoUint64
+ 1, // EfiCpuIoWidthFillUint8
+ 2, // EfiCpuIoWidthFillUint16
+ 4, // EfiCpuIoWidthFillUint32
+ 8 // EfiCpuIoWidthFillUint64
+};
+
+//
+// Lookup table for increment values based on transfer widths
+//
+STATIC CONST UINT8 mOutStride[] = {
+ 1, // EfiCpuIoWidthUint8
+ 2, // EfiCpuIoWidthUint16
+ 4, // EfiCpuIoWidthUint32
+ 8, // EfiCpuIoWidthUint64
+ 1, // EfiCpuIoWidthFifoUint8
+ 2, // EfiCpuIoWidthFifoUint16
+ 4, // EfiCpuIoWidthFifoUint32
+ 8, // EfiCpuIoWidthFifoUint64
+ 0, // EfiCpuIoWidthFillUint8
+ 0, // EfiCpuIoWidthFillUint16
+ 0, // EfiCpuIoWidthFillUint32
+ 0 // EfiCpuIoWidthFillUint64
+};
+
+/**
+ Check parameters to a CPU I/O 2 Protocol service request.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The parameters for this request pass the checks.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+CpuIoCheckParameter (
+ IN BOOLEAN MmioOperation,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ UINT64 MaxCount;
+ UINT64 Limit;
+
+ //
+ // Check to see if Buffer is NULL
+ //
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Width is in the valid range
+ //
+ if ((UINT32)Width >= EfiCpuIoWidthMaximum) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // For FIFO type, the target address won't increase during the access,
+ // so treat Count as 1
+ //
+ if ((Width >= EfiCpuIoWidthFifoUint8)
+ && (Width <= EfiCpuIoWidthFifoUint64))
+ {
+ Count = 1;
+ }
+
+ //
+ // Check to see if Width is in the valid range for I/O Port operations
+ //
+ Width = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ if ((!MmioOperation)
+ && (Width == EfiCpuIoWidthUint64))
+ {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check to see if Address is aligned
+ //
+ if ((Address & (UINT64) (mInStride[Width] - 1)) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Check to see if any address associated with this transfer exceeds the maximum
+ // allowed address. The maximum address implied by the parameters passed in is
+ // Address + Size * Count. If the following condition is met, then the transfer
+ // is not supported.
+ //
+ // Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1
+ //
+ // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
+ // can also be the maximum integer value supported by the CPU, this range
+ // check must be adjusted to avoid all overflow conditions.
+ //
+ // The following form of the range check is equivalent but assumes that
+ // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
+ //
+ Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS);
+ if (Count == 0) {
+ if (Address > Limit) {
+ return EFI_UNSUPPORTED;
+ }
+ } else {
+ MaxCount = RShiftU64 (Limit, Width);
+ if (MaxCount < (Count - 1)) {
+ return EFI_UNSUPPORTED;
+ }
+ if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
+ return EFI_UNSUPPORTED;
+ }
+ }
+
+ //
+ // Check to see if Buffer is aligned
+ //
+ if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width]) - 1))) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+ Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Writes memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint64) {
+ MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
+ }
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Reads I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuIoServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Address += PcdGet64 (PcdPciIoTranslation);
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+
+ for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ *Uint8Buffer = MmioRead8 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Write I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuIoServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINT8 InStride;
+ UINT8 OutStride;
+ EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth;
+ UINT8 *Uint8Buffer;
+
+ //
+ // Make sure the parameters are valid
+ //
+ Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Address += PcdGet64 (PcdPciIoTranslation);
+
+ //
+ // Select loop based on the width of the transfer
+ //
+ InStride = mInStride[Width];
+ OutStride = mOutStride[Width];
+ OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03);
+
+ for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
+ if (OperationWidth == EfiCpuIoWidthUint8) {
+ MmioWrite8 ((UINTN)Address, *Uint8Buffer);
+ } else if (OperationWidth == EfiCpuIoWidthUint16) {
+ MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
+ } else if (OperationWidth == EfiCpuIoWidthUint32) {
+ MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+//
+// CPU I/O 2 Protocol instance
+//
+STATIC EFI_CPU_IO2_PROTOCOL mCpuIo2 = {
+ {
+ CpuMemoryServiceRead,
+ CpuMemoryServiceWrite
+ },
+ {
+ CpuIoServiceRead,
+ CpuIoServiceWrite
+ }
+};
+
+
+/**
+ The user Entry Point for module CpuIo2Dxe. The user code starts with this function.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval other Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+PciCpuIo2Initialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid);
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &mHandle,
+ &gEfiCpuIo2ProtocolGuid, &mCpuIo2,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
diff --git a/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h
new file mode 100644
index 0000000000..a3f8cf7cbb
--- /dev/null
+++ b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h
@@ -0,0 +1,219 @@
+/** @file
+ Internal include file for the CPU I/O 2 Protocol.
+
+Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef PCI_CPU_IO2_DXE_H_
+#define PCI_CPU_IO2_DXE_H_
+
+//#include <PiDxe.h>
+//
+//#include <Protocol/CpuIo2.h>
+//
+//#include <Library/BaseLib.h>
+//#include <Library/DebugLib.h>
+//#include <Library/IoLib.h>
+//#include <Library/UefiBootServicesTableLib.h>
+
+#define MAX_IO_PORT_ADDRESS 0xFFFF
+
+/**
+ Reads memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+/**
+ Writes memory-mapped registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuMemoryServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ );
+
+/**
+ Reads I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[out] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuIoServiceRead (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ OUT VOID *Buffer
+ );
+
+/**
+ Write I/O registers.
+
+ The I/O operations are carried out exactly as requested. The caller is responsible
+ for satisfying any alignment and I/O width restrictions that a PI System on a
+ platform might require. For example on some platforms, width requests of
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
+ be handled by the driver.
+
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32,
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for
+ each of the Count operations that is performed.
+
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16,
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times on the same Address.
+
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16,
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is
+ incremented for each of the Count operations that is performed. The read or
+ write operation is performed Count times from the first element of Buffer.
+
+ @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance.
+ @param[in] Width Signifies the width of the I/O or Memory operation.
+ @param[in] Address The base address of the I/O operation.
+ @param[in] Count The number of I/O operations to perform. The number of
+ bytes moved is Width size * Count, starting at Address.
+ @param[in] Buffer For read operations, the destination buffer to store the results.
+ For write operations, the source buffer from which to write data.
+
+ @retval EFI_SUCCESS The data was read from or written to the PI system.
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width,
+ and Count is not valid for this PI system.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuIoServiceWrite (
+ IN EFI_CPU_IO2_PROTOCOL *This,
+ IN EFI_CPU_IO_PROTOCOL_WIDTH Width,
+ IN UINT64 Address,
+ IN UINTN Count,
+ IN VOID *Buffer
+ );
+
+#endif
diff --git a/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf
new file mode 100644
index 0000000000..9fb7160ae7
--- /dev/null
+++ b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf
@@ -0,0 +1,40 @@
+## @file
+# Produces the CPU I/O 2 Protocol by using the services of the I/O Library.
+#
+# Copyright (c) 2021 Loongson Technology Corporation Limited. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = PciCpuIo2Dxe
+ FILE_GUID = 168D1A6E-F4A5-448A-9E95-795661BB3067
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = PciCpuIo2Initialize
+
+[Sources]
+ PciCpuIo2Dxe.c
+
+[Packages]
+ Platform/Loongson/LoongArchQemuPkg/Loongson.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+ BaseLib
+ DebugLib
+ IoLib
+ PcdLib
+ UefiBootServicesTableLib
+
+[Pcd]
+ gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation
+
+[Protocols]
+ gEfiCpuIo2ProtocolGuid ## PRODUCES
+
+[Depex]
+ TRUE
--
2.31.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#93563): https://edk2.groups.io/g/devel/message/93563
Mute This Topic: https://groups.io/mt/93565586/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list