[edk2-devel] [PATCH v1 26/34] MdePkg/BasePeCoff: Add LoongArch PE/Coff related code.
Michael D Kinney
michael.d.kinney at intel.com
Fri Sep 9 17:23:00 UTC 2022
Can you add link to spec that defines LOONGARCH PE/COFF relocation types?
Mike
> -----Original Message-----
> From: Chao Li <lichao at loongson.cn>
> Sent: Wednesday, September 7, 2022 9:52 PM
> To: devel at edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Gao, Liming <gaoliming at byosoft.com.cn>; Liu, Zhiguang
> <zhiguang.liu at intel.com>; Baoqi Zhang <zhangbaoqi at loongson.cn>
> Subject: [PATCH v1 26/34] MdePkg/BasePeCoff: Add LoongArch PE/Coff related code.
>
> Add LoongArch image relocation.
>
> Cc: Michael D Kinney <michael.d.kinney at intel.com>
> Cc: Liming Gao <gaoliming at byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu at intel.com>
>
> Signed-off-by: Chao Li <lichao at loongson.cn>
> Co-authored-by: Baoqi Zhang <zhangbaoqi at loongson.cn>
> ---
> MdePkg/Library/BasePeCoffLib/BasePeCoff.c | 3 +-
> .../Library/BasePeCoffLib/BasePeCoffLib.inf | 5 +
> .../Library/BasePeCoffLib/BasePeCoffLib.uni | 2 +
> .../BasePeCoffLib/LoongArch/PeCoffLoaderEx.c | 137 ++++++++++++++++++
> 4 files changed, 146 insertions(+), 1 deletion(-)
> create mode 100644 MdePkg/Library/BasePeCoffLib/LoongArch/PeCoffLoaderEx.c
>
> diff --git a/MdePkg/Library/BasePeCoffLib/BasePeCoff.c b/MdePkg/Library/BasePeCoffLib/BasePeCoff.c
> index 6d8d9faeb8..97a8aaf8c7 100644
> --- a/MdePkg/Library/BasePeCoffLib/BasePeCoff.c
> +++ b/MdePkg/Library/BasePeCoffLib/BasePeCoff.c
> @@ -1,6 +1,6 @@
> /** @file
>
> Base PE/COFF loader supports loading any PE32/PE32+ or TE image, but
>
> - only supports relocating IA32, x64, IPF, ARM, RISC-V and EBC images.
>
> + only supports relocating IA32, x64, IPF, ARM, RISC-V, LoongArch and EBC images.
>
>
>
> Caution: This file requires additional review when modified.
>
> This library will have external input - PE/COFF image.
>
> @@ -18,6 +18,7 @@
> Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
>
> Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
>
> Portions Copyright (c) 2020, Hewlett Packard Enterprise Development LP. All rights reserved.<BR>
>
> + Portions Copyright (c) 2022, Loongson Technology Corporation Limited. All rights reserved.<BR>
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
>
>
> **/
>
> diff --git a/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf b/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> index 110b6d5a09..3b8b8eb191 100644
> --- a/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> +++ b/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
> @@ -4,6 +4,7 @@
> # The IA32 version library support loading IA32, X64 and EBC PE/COFF images.
>
> # The X64 version library support loading IA32, X64 and EBC PE/COFF images.
>
> # The RISC-V version library support loading RISC-V images.
>
> +# The LoongArch version library support loading LoongArch images.
>
> #
>
> # Caution: This module requires additional review when modified.
>
> # This library will have external input - PE/COFF image.
>
> @@ -13,6 +14,7 @@
> # Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
>
> # Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
>
> # Portions Copyright (c) 2020, Hewlett Packard Enterprise Development LP. All rights reserved.<BR>
>
> +# Portions Copyright (c) 2022, Loongson Technology Corporation Limited. All rights reserved.<BR>
>
> #
>
> # SPDX-License-Identifier: BSD-2-Clause-Patent
>
> #
>
> @@ -46,6 +48,9 @@
> [Sources.RISCV64]
>
> RiscV/PeCoffLoaderEx.c
>
>
>
> +[Sources.LOONGARCH64]
>
> + LoongArch/PeCoffLoaderEx.c
>
> +
>
> [Packages]
>
> MdePkg/MdePkg.dec
>
>
>
> diff --git a/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.uni b/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.uni
> index 55417029f2..1f731344e1 100644
> --- a/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.uni
> +++ b/MdePkg/Library/BasePeCoffLib/BasePeCoffLib.uni
> @@ -5,6 +5,7 @@
> // The IA32 version library support loading IA32, X64 and EBC PE/COFF images.
>
> // The X64 version library support loading IA32, X64 and EBC PE/COFF images.
>
> // The RISC-V version library support loading RISC-V32 and RISC-V64 PE/COFF images.
>
> +// The LoongArch version library support loading LoongArch32 and LoongArch64 PE/COFF images.
>
> //
>
> // Caution: This module requires additional review when modified.
>
> // This library will have external input - PE/COFF image.
>
> @@ -14,6 +15,7 @@
> // Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
>
> // Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
>
> // Portions Copyright (c) 2020, Hewlett Packard Enterprise Development LP. All rights reserved.<BR>
>
> +// Portions Copyright (c) 2022, Loongson Technology Corporation Limited. All rights reserved.<BR>
>
> //
>
> // SPDX-License-Identifier: BSD-2-Clause-Patent
>
> //
>
> diff --git a/MdePkg/Library/BasePeCoffLib/LoongArch/PeCoffLoaderEx.c b/MdePkg/Library/BasePeCoffLib/LoongArch/PeCoffLoaderEx.c
> new file mode 100644
> index 0000000000..417096f334
> --- /dev/null
> +++ b/MdePkg/Library/BasePeCoffLib/LoongArch/PeCoffLoaderEx.c
> @@ -0,0 +1,137 @@
> +/** @file
>
> + PE/Coff loader for LoongArch PE image
>
> +
>
> + Copyright (c) 2022, Loongson Technology Corporation Limited. All rights reserved.<BR>
>
> +
>
> + SPDX-License-Identifier: BSD-2-Clause-Patent
>
> +**/
>
> +
>
> +#include "BasePeCoffLibInternals.h"
>
> +#include <Library/BaseLib.h>
>
> +
>
> +/**
>
> + Performs an LoongArch specific relocation fixup and is a no-op on other
>
> + instruction sets.
>
> +
>
> + @param[in] Reloc Pointer to the relocation record.
>
> + @param[in, out] Fixup Pointer to the address to fix up.
>
> + @param[in, out] FixupData Pointer to a buffer to log the fixups.
>
> + @param[in] Adjust The offset to adjust the fixup.
>
> +
>
> + @return Status code.
>
> +
>
> +**/
>
> +RETURN_STATUS
>
> +PeCoffLoaderRelocateImageEx (
>
> + IN UINT16 *Reloc,
>
> + IN OUT CHAR8 *Fixup,
>
> + IN OUT CHAR8 **FixupData,
>
> + IN UINT64 Adjust
>
> + )
>
> +{
>
> + UINT8 RelocType;
>
> + UINT64 Value;
>
> + UINT64 Tmp1;
>
> + UINT64 Tmp2;
>
> +
>
> + RelocType = (*Reloc) >> 12;
>
> + Value = 0;
>
> + Tmp1 = 0;
>
> + Tmp2 = 0;
>
> +
>
> + switch (RelocType) {
>
> + case EFI_IMAGE_REL_BASED_LOONGARCH64_MARK_LA:
>
> + // The next four instructions are used to load a 64 bit address, relocate all of them
>
> + Value = (*(UINT32 *)Fixup & 0x1ffffe0) << 7 | // lu12i.w 20bits from bit5
>
> + (*((UINT32 *)Fixup + 1) & 0x3ffc00) >> 10; // ori 12bits from bit10
>
> + Tmp1 = *((UINT32 *)Fixup + 2) & 0x1ffffe0; // lu32i.d 20bits from bit5
>
> + Tmp2 = *((UINT32 *)Fixup + 3) & 0x3ffc00; // lu52i.d 12bits from bit10
>
> + Value = Value | (Tmp1 << 27) | (Tmp2 << 42);
>
> + Value += Adjust;
>
> +
>
> + *(UINT32 *)Fixup = (*(UINT32 *)Fixup & ~0x1ffffe0) | (((Value >> 12) & 0xfffff) << 5);
>
> + if (*FixupData != NULL) {
>
> + *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT32));
>
> + *(UINT32 *)(*FixupData) = *(UINT32 *)Fixup;
>
> + *FixupData = *FixupData + sizeof (UINT32);
>
> + }
>
> +
>
> + Fixup += sizeof (UINT32);
>
> + *(UINT32 *)Fixup = (*(UINT32 *)Fixup & ~0x3ffc00) | ((Value & 0xfff) << 10);
>
> + if (*FixupData != NULL) {
>
> + *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT32));
>
> + *(UINT32 *)(*FixupData) = *(UINT32 *)Fixup;
>
> + *FixupData = *FixupData + sizeof (UINT32);
>
> + }
>
> +
>
> + Fixup += sizeof (UINT32);
>
> + *(UINT32 *)Fixup = (*(UINT32 *)Fixup & ~0x1ffffe0) | (((Value >> 32) & 0xfffff) << 5);
>
> + if (*FixupData != NULL) {
>
> + *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT32));
>
> + *(UINT32 *)(*FixupData) = *(UINT32 *)Fixup;
>
> + *FixupData = *FixupData + sizeof (UINT32);
>
> + }
>
> +
>
> + Fixup += sizeof (UINT32);
>
> + *(UINT32 *)Fixup = (*(UINT32 *)Fixup & ~0x3ffc00) | (((Value >> 52) & 0xfff) << 10);
>
> + if (*FixupData != NULL) {
>
> + *FixupData = ALIGN_POINTER (*FixupData, sizeof (UINT32));
>
> + *(UINT32 *)(*FixupData) = *(UINT32 *)Fixup;
>
> + *FixupData = *FixupData + sizeof (UINT32);
>
> + }
>
> +
>
> + break;
>
> + default:
>
> + return RETURN_UNSUPPORTED;
>
> + }
>
> +
>
> + return RETURN_SUCCESS;
>
> +}
>
> +
>
> +/**
>
> + Returns TRUE if the machine type of PE/COFF image is supported. Supported
>
> + does not mean the image can be executed it means the PE/COFF loader supports
>
> + loading and relocating of the image type. It's up to the caller to support
>
> + the entry point.
>
> +
>
> + @param[in] Machine Machine type from the PE Header.
>
> +
>
> + @return TRUE if this PE/COFF loader can load the image
>
> +
>
> +**/
>
> +BOOLEAN
>
> +PeCoffLoaderImageFormatSupported (
>
> + IN UINT16 Machine
>
> + )
>
> +{
>
> + if (Machine == IMAGE_FILE_MACHINE_LOONGARCH64) {
>
> + return TRUE;
>
> + }
>
> +
>
> + return FALSE;
>
> +}
>
> +
>
> +/**
>
> + Performs an LOONGARCH-based specific re-relocation fixup and is a no-op on other
>
> + instruction sets. This is used to re-relocated the image into the EFI virtual
>
> + space for runtime calls.
>
> +
>
> + @param[in] Reloc The pointer to the relocation record.
>
> + @param[in, out] Fixup The pointer to the address to fix up.
>
> + @param[in, out] FixupData The pointer to a buffer to log the fixups.
>
> + @param[in] Adjust The offset to adjust the fixup.
>
> +
>
> + @return Status code.
>
> +
>
> +**/
>
> +RETURN_STATUS
>
> +PeHotRelocateImageEx (
>
> + IN UINT16 *Reloc,
>
> + IN OUT CHAR8 *Fixup,
>
> + IN OUT CHAR8 **FixupData,
>
> + IN UINT64 Adjust
>
> + )
>
> +{
>
> + // To check
>
> + return PeCoffLoaderRelocateImageEx (Reloc, Fixup, FixupData, Adjust);
>
> +}
>
> --
> 2.27.0
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#93601): https://edk2.groups.io/g/devel/message/93601
Mute This Topic: https://groups.io/mt/93542560/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list