[edk2-devel] [PATCH v4 2/2] MdeModulePkg/Bus/Ata/AtaAtapiPassThru: Fix UNUSED_VALUE Coverity issue

[Wu, Hao A]

> -----Original Message-----
> From: Ranbir Singh <rsingh at ventanamicro.com>
> Sent: Monday, July 17, 2023 12:25 PM
> To: devel at edk2.groups.io; rsingh at ventanamicro.com
> Cc: Wu, Hao A <hao.a.wu at intel.com>; Ni, Ray <ray.ni at intel.com>
> Subject: [PATCH v4 2/2] MdeModulePkg/Bus/Ata/AtaAtapiPassThru: Fix
> UNUSED_VALUE Coverity issue
> 
> From: Ranbir Singh <Ranbir.Singh3 at Dell.com>
> 
> The return value stored in Status after call to SetDriveParameters
> is not made of any use thereafter and hence it remains as UNUSED.
> 
> Based on Hao's findings (https://edk2.groups.io/g/devel/message/106844),
> the successful execution of SetDriveParameters() is not mandatory for
> initializing IDE mode of a hard disk device. Hence remove the 'Status'
> assignment of the return value from SetDriveParameters() and instead add
> error checks & DEBUG_WARN level messages within SetDriveParameters()
> function after sending INIT_DRIVE_PARAM & SET_MULTIPLE_MODE ATA
> commands.


Reviewed-by: Hao A Wu <hao.a.wu at intel.com>

Best Regards,
Hao Wu


> 
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4204
> 
> Cc: Hao A Wu <hao.a.wu at intel.com>
> Cc: Ray Ni <ray.ni at intel.com>
> Signed-off-by: Ranbir Singh <Ranbir.Singh3 at Dell.com>
> Signed-off-by: Ranbir Singh <rsingh at ventanamicro.com>
> ---
>  MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c
> b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c
> index 75403886e44a..19d7b4930cb7 100644
> --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c
> +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c
> @@ -1992,6 +1992,10 @@ SetDriveParameters (
>               NULL
> 
>               );
> 
> 
> 
> +  if (EFI_ERROR (Status)) {
> 
> +    DEBUG ((DEBUG_WARN, "Init Drive Parameters Fail, Status = %r\n",
> Status));
> 
> +  }
> 
> +
> 
>    //
> 
>    // Send Set Multiple parameters
> 
>    //
> 
> @@ -2008,6 +2012,10 @@ SetDriveParameters (
>               NULL
> 
>               );
> 
> 
> 
> +  if (EFI_ERROR (Status)) {
> 
> +    DEBUG ((DEBUG_WARN, "Set Multiple Mode Parameters Fail, Status
> = %r\n", Status));
> 
> +  }
> 
> +
> 
>    return Status;
> 
>  }
> 
> 
> 
> @@ -2549,13 +2557,13 @@ DetectAndConfigIdeDevice (
>      //
> 
>      if (DeviceType == EfiIdeHarddisk) {
> 
>        //
> 
> -      // Init driver parameters
> 
> +      // Init drive parameters
> 
>        //
> 
>        DriveParameters.Sector         = (UINT8)((ATA5_IDENTIFY_DATA
> *)(&Buffer.AtaData))->sectors_per_track;
> 
>        DriveParameters.Heads          = (UINT8)(((ATA5_IDENTIFY_DATA
> *)(&Buffer.AtaData))->heads - 1);
> 
>        DriveParameters.MultipleSector = (UINT8)((ATA5_IDENTIFY_DATA
> *)(&Buffer.AtaData))->multi_sector_cmd_max_sct_cnt;
> 
> 
> 
> -      Status = SetDriveParameters (Instance, IdeChannel, IdeDevice,
> &DriveParameters, NULL);
> 
> +      SetDriveParameters (Instance, IdeChannel, IdeDevice, &DriveParameters,
> NULL);
> 
>      }
> 
> 
> 
>      //
> 
> --
> 2.34.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#107388): https://edk2.groups.io/g/devel/message/107388
Mute This Topic: https://groups.io/mt/100212105/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-