[edk2-devel] [Patch V4 3/5] UefiCpuPkg: Create MpHandOff.
Yuanhao Xie
yuanhao.xie at intel.com
Wed Jun 28 08:47:22 UTC 2023
Initially, the purpose of the Hob was twofold: it served as a way to
transfer information from PEI to DXE. However, during the DXE phase,
only a few fields from the CPU_MP_DATA which collected in PEI phase were
needed. A new Hob was specifically created to transfer information
to the DXE phase. This new Hob contained only the essential fields
required for reuse in DXE. For instance, instead of directly including
the BspNumber in MpHandOff, the DXE phase introduced the use of
GetBspNumber() to collect the BspNumber from ApicID and CpuCount.
The SaveCpuMpData() function was updated to construct the MP_HAND_OFF
Hob. Additionally, the function introduced the MP_HAND_OFF_SIGNAL,
which solely served the purpose of awakening the APs
and transitioning their context from PEI to DXE. The
WaitLoopExecutionMode field indicated whether the bit mode of PEI
matched that of DXE. Both of them were filled only if the ApLoopMode
was not ApInHltLoop. In the case of ApInHltLoop, it remained necessary
to wake up the APs using the init-sipi-sipi sequence. This improvement
still allow INIT-SIPI-SIPI even APs are wait in Run/Mwait loop mode.
The function GetMpHandOffHob() was added to facilitate access to the
collected MpHandOff in the DXE phase. The CpuMpData in the DXE phase
was updated by gathering information from MpHandOff. Since MpHandOff
replaced the usage of OldCpuMpData and contained essential information
from the PEI phase to the DXE phase. AmdSevUpdateCpuMpData was included
to maintain the original implementation of AmdSev, ensuring that
OldCpuMpData->NewCpuMpData pointed to CpuMpData.
Cc: Gerd Hoffmann <kraxel at redhat.com>
Cc: Eric Dong <eric.dong at intel.com>
Cc: Ray Ni <ray.ni at intel.com>
Cc: Rahul Kumar <rahul1.kumar at intel.com>
Cc: Tom Lendacky <thomas.lendacky at amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie at intel.com>
---
UefiCpuPkg/Library/MpInitLib/AmdSev.c | 17 +++++++++++++++++
UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 1 +
UefiCpuPkg/Library/MpInitLib/MpHandOff.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++
UefiCpuPkg/Library/MpInitLib/MpLib.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------
UefiCpuPkg/Library/MpInitLib/MpLib.h | 19 +++++++++++++++++++
UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 2 +-
UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 32 +++++++++++++++++++++++++++++++-
7 files changed, 186 insertions(+), 15 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/AmdSev.c b/UefiCpuPkg/Library/MpInitLib/AmdSev.c
index ca9bfed7f3..bda4960f6f 100644
--- a/UefiCpuPkg/Library/MpInitLib/AmdSev.c
+++ b/UefiCpuPkg/Library/MpInitLib/AmdSev.c
@@ -260,3 +260,20 @@ FillExchangeInfoDataSevEs (
ExchangeInfo->ExtTopoAvail = !!ExtTopoEbx.Bits.LogicalProcessors;
}
}
+
+/**
+ Get pointer to CPU MP Data structure from GUIDed HOB.
+
+ @param[in] CpuMpData The pointer to CPU MP Data structure.
+**/
+VOID
+AmdSevUpdateCpuMpData (
+ IN CPU_MP_DATA *CpuMpData
+ )
+{
+ CPU_MP_DATA *OldCpuMpData;
+
+ OldCpuMpData = GetCpuMpDataFromGuidedHob ();
+
+ OldCpuMpData->NewCpuMpData = CpuMpData;
+}
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
index 67ebf7254c..7d45d3ad4d 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
@@ -38,6 +38,7 @@
MpLib.c
MpLib.h
Microcode.c
+ MpHandOff.h
[Packages]
MdePkg/MdePkg.dec
diff --git a/UefiCpuPkg/Library/MpInitLib/MpHandOff.h b/UefiCpuPkg/Library/MpInitLib/MpHandOff.h
new file mode 100644
index 0000000000..83e4055ec9
--- /dev/null
+++ b/UefiCpuPkg/Library/MpInitLib/MpHandOff.h
@@ -0,0 +1,47 @@
+/** @file
+ Defines the HOB GUID used to describe the MSEG memory region allocated in PEI.
+ Copyright (c) 2015 - 2023, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef MP_HANDOFF_H_
+#define MP_HANDOFF_H_
+
+#define MP_HANDOFF_GUID \
+ { \
+ 0x11e2bd88, 0xed38, 0x4abd, {0xa3, 0x99, 0x21, 0xf2, 0x5f, 0xd0, 0x7a, 0x60 } \
+ }
+
+extern EFI_GUID mMpHandOffGuid;
+
+//
+// The information required to transfer from the PEI phase to the
+// DXE phase is contained within the MP_HAND_OFF and PROCESSOR_HAND_OFF.
+// If the SizeOfPointer (WaitLoopExecutionMode) of both phases are equal,
+// and the APs is not in halt mode,
+// then the APs can be awakened by triggering the start-up
+// signal, rather than using INIT-SIPI-SIPI.
+// To trigger the start-up signal, BSP writes the specified
+// StartupSignalValue to the StartupSignalAddress of each processor.
+// This address is monitored by the APs.
+//
+typedef struct {
+ UINT32 ApicId;
+ UINT32 Health;
+ UINT64 StartupSignalAddress;
+ UINT64 StartupProcedureAddress;
+} PROCESSOR_HAND_OFF;
+
+typedef struct {
+ //
+ // The ProcessorIndex indicates the range of processors. If it is set to 0, it signifies
+ // processors from 0 to CpuCount - 1. Multiple instances in the HOB list describe
+ // processors from ProcessorIndex to ProcessorIndex + CpuCount - 1.
+ //
+ UINT32 ProcessorIndex;
+ UINT32 CpuCount;
+ UINT32 WaitLoopExecutionMode;
+ UINT32 StartupSignalValue;
+ PROCESSOR_HAND_OFF Info[];
+} MP_HAND_OFF;
+#endif
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index e8dd640f9b..ccc01859f0 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -14,6 +14,7 @@
#include <Register/Amd/Ghcb.h>
EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;
+EFI_GUID mMpHandOffGuid = MP_HANDOFF_GUID;
/**
Save the volatile registers required to be restored following INIT IPI.
@@ -1814,6 +1815,59 @@ CheckAllAPs (
return EFI_NOT_READY;
}
+/**
+ This function Get BspNumber.
+
+ @param[in] MpHandOff Pointer to MpHandOff
+ @return BspNumber
+**/
+UINT32
+GetBspNumber (
+ IN CONST MP_HAND_OFF *MpHandOff
+ )
+{
+ UINT32 ApicId;
+ UINT32 BspNumber;
+ UINT32 Index;
+
+ //
+ // Get the processor number for the BSP
+ //
+ BspNumber = MAX_UINT32;
+ ApicId = GetInitialApicId ();
+ for (Index = 0; Index < MpHandOff->CpuCount; Index++) {
+ if (MpHandOff->Info[Index].ApicId == ApicId) {
+ BspNumber = Index;
+ }
+ }
+
+ ASSERT (BspNumber != MAX_UINT32);
+
+ return BspNumber;
+}
+
+/**
+ Get pointer to MP_HAND_OFF GUIDed HOB.
+
+ @return The pointer to MP_HAND_OFF structure.
+**/
+MP_HAND_OFF *
+GetMpHandOffHob (
+ VOID
+ )
+{
+ EFI_HOB_GUID_TYPE *GuidHob;
+ MP_HAND_OFF *MpHandOff;
+
+ MpHandOff = NULL;
+ GuidHob = GetFirstGuidHob (&mMpHandOffGuid);
+ if (GuidHob != NULL) {
+ MpHandOff = (MP_HAND_OFF *)GET_GUID_HOB_DATA (GuidHob);
+ }
+
+ return MpHandOff;
+}
+
/**
MP Initialize Library initialization.
@@ -1833,7 +1887,7 @@ MpInitLibInitialize (
VOID
)
{
- CPU_MP_DATA *OldCpuMpData;
+ MP_HAND_OFF *MpHandOff;
CPU_INFO_IN_HOB *CpuInfoInHob;
UINT32 MaxLogicalProcessorNumber;
UINT32 ApStackSize;
@@ -1852,11 +1906,11 @@ MpInitLibInitialize (
UINTN BackupBufferAddr;
UINTN ApIdtBase;
- OldCpuMpData = GetCpuMpDataFromGuidedHob ();
- if (OldCpuMpData == NULL) {
+ MpHandOff = GetMpHandOffHob ();
+ if (MpHandOff == NULL) {
MaxLogicalProcessorNumber = PcdGet32 (PcdCpuMaxLogicalProcessorNumber);
} else {
- MaxLogicalProcessorNumber = OldCpuMpData->CpuCount;
+ MaxLogicalProcessorNumber = MpHandOff->CpuCount;
}
ASSERT (MaxLogicalProcessorNumber != 0);
@@ -2000,7 +2054,7 @@ MpInitLibInitialize (
//
ProgramVirtualWireMode ();
- if (OldCpuMpData == NULL) {
+ if (MpHandOff == NULL) {
if (MaxLogicalProcessorNumber > 1) {
//
// Wakeup all APs and calculate the processor count in system
@@ -2012,15 +2066,18 @@ MpInitLibInitialize (
// APs have been wakeup before, just get the CPU Information
// from HOB
//
- OldCpuMpData->NewCpuMpData = CpuMpData;
- CpuMpData->CpuCount = OldCpuMpData->CpuCount;
- CpuMpData->BspNumber = OldCpuMpData->BspNumber;
- CpuMpData->CpuInfoInHob = OldCpuMpData->CpuInfoInHob;
- CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;
+ AmdSevUpdateCpuMpData (CpuMpData);
+ CpuMpData->CpuCount = MpHandOff->CpuCount;
+ CpuMpData->BspNumber = GetBspNumber (MpHandOff);
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;
for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
InitializeSpinLock (&CpuMpData->CpuData[Index].ApLock);
- CpuMpData->CpuData[Index].CpuHealthy = (CpuInfoInHob[Index].Health == 0) ? TRUE : FALSE;
+ CpuMpData->CpuData[Index].CpuHealthy = (MpHandOff->Info[Index].Health == 0) ? TRUE : FALSE;
CpuMpData->CpuData[Index].ApFunction = 0;
+ CpuInfoInHob[Index].InitialApicId = MpHandOff->Info[Index].ApicId;
+ CpuInfoInHob[Index].ApTopOfStack = CpuMpData->Buffer + (Index + 1) * CpuMpData->CpuApStackSize;
+ CpuInfoInHob[Index].ApicId = MpHandOff->Info[Index].ApicId;
+ CpuInfoInHob[Index].Health = MpHandOff->Info[Index].Health;
}
}
@@ -2049,7 +2106,7 @@ MpInitLibInitialize (
// Wakeup APs to do some AP initialize sync (Microcode & MTRR)
//
if (CpuMpData->CpuCount > 1) {
- if (OldCpuMpData != NULL) {
+ if (MpHandOff != NULL) {
//
// Only needs to use this flag for DXE phase to update the wake up
// buffer. Wakeup buffer allocated in PEI phase is no longer valid
@@ -2066,7 +2123,7 @@ MpInitLibInitialize (
CpuPause ();
}
- if (OldCpuMpData != NULL) {
+ if (MpHandOff != NULL) {
CpuMpData->InitFlag = ApInitDone;
}
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index b694c7b40f..a7f36d323b 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -39,8 +39,17 @@
#include <Register/Amd/Ghcb.h>
#include <Guid/MicrocodePatchHob.h>
+#include "MpHandOff.h"
#define WAKEUP_AP_SIGNAL SIGNATURE_32 ('S', 'T', 'A', 'P')
+//
+// To trigger the start-up signal, BSP writes the specified
+// StartupSignalValue to the StartupSignalAddress of each processor.
+// This address is monitored by the APs, and as soon as they receive
+// the value that matches the MP_HAND_OFF_SIGNAL, they will wake up
+// and switch the context from PEI to DXE phase.
+//
+#define MP_HAND_OFF_SIGNAL SIGNATURE_32 ('M', 'P', 'H', 'O')
#define CPU_INIT_MP_LIB_HOB_GUID \
{ \
@@ -891,4 +900,14 @@ SevSnpCreateAP (
IN INTN ProcessorNumber
);
+/**
+ Get pointer to CPU MP Data structure from GUIDed HOB.
+
+ @param[in] CpuMpData The pointer to CPU MP Data structure.
+**/
+VOID
+AmdSevUpdateCpuMpData (
+ IN CPU_MP_DATA *CpuMpData
+ );
+
#endif
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
index 78eded96bf..83e9028d0f 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
@@ -36,7 +36,7 @@
MpLib.c
MpLib.h
Microcode.c
-
+ MpHandOff.h
[Packages]
MdePkg/MdePkg.dec
UefiCpuPkg/UefiCpuPkg.dec
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
index 013f89b197..f80e00edcf 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
@@ -126,7 +126,37 @@ SaveCpuMpData (
IN CPU_MP_DATA *CpuMpData
)
{
- UINT64 Data64;
+ UINT64 Data64;
+ UINTN Index;
+ CPU_INFO_IN_HOB *CpuInfoInHob;
+ MP_HAND_OFF *MpHandOff;
+ UINTN MpHandOffSize;
+
+ //
+ // When APs are in a state that can be waken up by a store operation to a memory address,
+ // report the MP_HAND_OFF data for DXE to use.
+ //
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;
+ MpHandOffSize = sizeof (MP_HAND_OFF) + sizeof (PROCESSOR_HAND_OFF) * CpuMpData->CpuCount;
+ MpHandOff = (MP_HAND_OFF *)BuildGuidHob (&mMpHandOffGuid, MpHandOffSize);
+ ASSERT (MpHandOff != NULL);
+ ZeroMem (MpHandOff, MpHandOffSize);
+ MpHandOff->ProcessorIndex = 0;
+
+ MpHandOff->CpuCount = CpuMpData->CpuCount;
+ if (CpuMpData->ApLoopMode != ApInHltLoop) {
+ MpHandOff->StartupSignalValue = MP_HAND_OFF_SIGNAL;
+ MpHandOff->WaitLoopExecutionMode = sizeof (VOID *);
+ }
+
+ for (Index = 0; Index < MpHandOff->CpuCount; Index++) {
+ MpHandOff->Info[Index].ApicId = CpuInfoInHob[Index].ApicId;
+ MpHandOff->Info[Index].Health = CpuInfoInHob[Index].Health;
+ if (CpuMpData->ApLoopMode != ApInHltLoop) {
+ MpHandOff->Info[Index].StartupSignalAddress = (UINT64)(UINTN)CpuMpData->CpuData[Index].StartupApSignal;
+ MpHandOff->Info[Index].StartupProcedureAddress = (UINT64)(UINTN)&CpuMpData->CpuData[Index].ApFunction;
+ }
+ }
//
// Build location of CPU MP DATA buffer in HOB
--
2.36.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#106462): https://edk2.groups.io/g/devel/message/106462
Mute This Topic: https://groups.io/mt/99826557/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list