[edk2-devel] [Patch V4 8/8] UefiCpuPkg: Move AsmRelocateApLoopStart from Mpfuncs.nasm to AmdSev.nasm
Yuanhao Xie
yuanhao.xie at intel.com
Wed Mar 1 06:09:54 UTC 2023
Cc: Guo Dong <guo.dong at intel.com>
Cc: Ray Ni <ray.ni at intel.com>
Cc: Sean Rhodes <sean at starlabs.systems>
Cc: James Lu <james.lu at intel.com>
Cc: Gua Guo <gua.guo at intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie at intel.com>
---
UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm | 170 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 169 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2 files changed, 170 insertions(+), 169 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
index 7c2469f9c5..2efa3cb104 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.nasm
@@ -346,3 +346,173 @@ PM16Mode:
iret
SwitchToRealProcEnd:
+
+;-------------------------------------------------------------------------------------
+; AsmRelocateApLoopAmdSev (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish, Pm16CodeSegment, SevEsAPJumpTable, WakeupBuffer);
+;-------------------------------------------------------------------------------------
+
+AsmRelocateApLoopAmdSevStart:
+BITS 64
+ cmp qword [rsp + 56], 0 ; SevEsAPJumpTable
+ je NoSevEsAmdSev
+
+ ;
+ ; Perform some SEV-ES related setup before leaving 64-bit mode
+ ;
+ push rcx
+ push rdx
+
+ ;
+ ; Get the RDX reset value using CPUID
+ ;
+ mov rax, 1
+ cpuid
+ mov rsi, rax ; Save off the reset value for RDX
+
+ ;
+ ; Prepare the GHCB for the AP_HLT_LOOP VMGEXIT call
+ ; - Must be done while in 64-bit long mode so that writes to
+ ; the GHCB memory will be unencrypted.
+ ; - No NAE events can be generated once this is set otherwise
+ ; the AP_RESET_HOLD SW_EXITCODE will be overwritten.
+ ;
+ mov rcx, 0xc0010130
+ rdmsr ; Retrieve current GHCB address
+ shl rdx, 32
+ or rdx, rax
+
+ mov rdi, rdx
+ xor rax, rax
+ mov rcx, 0x800
+ shr rcx, 3
+ rep stosq ; Clear the GHCB
+
+ mov rax, 0x80000004 ; VMGEXIT AP_RESET_HOLD
+ mov [rdx + 0x390], rax
+ mov rax, 114 ; Set SwExitCode valid bit
+ bts [rdx + 0x3f0], rax
+ inc rax ; Set SwExitInfo1 valid bit
+ bts [rdx + 0x3f0], rax
+ inc rax ; Set SwExitInfo2 valid bit
+ bts [rdx + 0x3f0], rax
+
+ pop rdx
+ pop rcx
+
+NoSevEsAmdSev:
+ cli ; Disable interrupt before switching to 32-bit mode
+ mov rax, [rsp + 40] ; CountTofinish
+ lock dec dword [rax] ; (*CountTofinish)--
+
+ mov r10, [rsp + 48] ; Pm16CodeSegment
+ mov rax, [rsp + 56] ; SevEsAPJumpTable
+ mov rbx, [rsp + 64] ; WakeupBuffer
+ mov rsp, r9 ; TopOfApStack
+
+ push rax ; Save SevEsAPJumpTable
+ push rbx ; Save WakeupBuffer
+ push r10 ; Save Pm16CodeSegment
+ push rcx ; Save MwaitSupport
+ push rdx ; Save ApTargetCState
+
+ lea rax, [PmEntryAmdSev] ; rax <- The start address of transition code
+
+ push r8
+ push rax
+
+ ;
+ ; Clear R8 - R15, for reset, before going into 32-bit mode
+ ;
+ xor r8, r8
+ xor r9, r9
+ xor r10, r10
+ xor r11, r11
+ xor r12, r12
+ xor r13, r13
+ xor r14, r14
+ xor r15, r15
+
+ ;
+ ; Far return into 32-bit mode
+ ;
+o64 retf
+
+BITS 32
+PmEntryAmdSev:
+ mov eax, cr0
+ btr eax, 31 ; Clear CR0.PG
+ mov cr0, eax ; Disable paging and caches
+
+ mov ecx, 0xc0000080
+ rdmsr
+ and ah, ~ 1 ; Clear LME
+ wrmsr
+ mov eax, cr4
+ and al, ~ (1 << 5) ; Clear PAE
+ mov cr4, eax
+
+ pop edx
+ add esp, 4
+ pop ecx,
+ add esp, 4
+
+MwaitCheckAmdSev:
+ cmp cl, 1 ; Check mwait-monitor support
+ jnz HltLoopAmdSev
+ mov ebx, edx ; Save C-State to ebx
+MwaitLoopAmdSev:
+ cli
+ mov eax, esp ; Set Monitor Address
+ xor ecx, ecx ; ecx = 0
+ xor edx, edx ; edx = 0
+ monitor
+ mov eax, ebx ; Mwait Cx, Target C-State per eax[7:4]
+ shl eax, 4
+ mwait
+ jmp MwaitLoopAmdSev
+
+HltLoopAmdSev:
+ pop edx ; PM16CodeSegment
+ add esp, 4
+ pop ebx ; WakeupBuffer
+ add esp, 4
+ pop eax ; SevEsAPJumpTable
+ add esp, 4
+ cmp eax, 0 ; Check for SEV-ES
+ je DoHltAmdSev
+
+ cli
+ ;
+ ; SEV-ES is enabled, use VMGEXIT (GHCB information already
+ ; set by caller)
+ ;
+BITS 64
+ rep vmmcall
+BITS 32
+
+ ;
+ ; Back from VMGEXIT AP_HLT_LOOP
+ ; Push the FLAGS/CS/IP values to use
+ ;
+ push word 0x0002 ; EFLAGS
+ xor ecx, ecx
+ mov cx, [eax + 2] ; CS
+ push cx
+ mov cx, [eax] ; IP
+ push cx
+ push word 0x0000 ; For alignment, will be discarded
+
+ push edx
+ push ebx
+
+ mov edx, esi ; Restore RDX reset value
+
+ retf
+
+DoHltAmdSev:
+ cli
+ hlt
+ jmp DoHltAmdSev
+
+BITS 64
+AsmRelocateApLoopAmdSevEnd:
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
index 1a64d5681f..9ebe31795b 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
@@ -277,175 +277,6 @@ CProcedureInvoke:
%include "AmdSev.nasm"
RendezvousFunnelProcEnd:
-;-------------------------------------------------------------------------------------
-; AsmRelocateApLoopAmdSev (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish, Pm16CodeSegment, SevEsAPJumpTable, WakeupBuffer);
-;-------------------------------------------------------------------------------------
-
-AsmRelocateApLoopAmdSevStart:
-BITS 64
- cmp qword [rsp + 56], 0 ; SevEsAPJumpTable
- je NoSevEsAmdSev
-
- ;
- ; Perform some SEV-ES related setup before leaving 64-bit mode
- ;
- push rcx
- push rdx
-
- ;
- ; Get the RDX reset value using CPUID
- ;
- mov rax, 1
- cpuid
- mov rsi, rax ; Save off the reset value for RDX
-
- ;
- ; Prepare the GHCB for the AP_HLT_LOOP VMGEXIT call
- ; - Must be done while in 64-bit long mode so that writes to
- ; the GHCB memory will be unencrypted.
- ; - No NAE events can be generated once this is set otherwise
- ; the AP_RESET_HOLD SW_EXITCODE will be overwritten.
- ;
- mov rcx, 0xc0010130
- rdmsr ; Retrieve current GHCB address
- shl rdx, 32
- or rdx, rax
-
- mov rdi, rdx
- xor rax, rax
- mov rcx, 0x800
- shr rcx, 3
- rep stosq ; Clear the GHCB
-
- mov rax, 0x80000004 ; VMGEXIT AP_RESET_HOLD
- mov [rdx + 0x390], rax
- mov rax, 114 ; Set SwExitCode valid bit
- bts [rdx + 0x3f0], rax
- inc rax ; Set SwExitInfo1 valid bit
- bts [rdx + 0x3f0], rax
- inc rax ; Set SwExitInfo2 valid bit
- bts [rdx + 0x3f0], rax
-
- pop rdx
- pop rcx
-
-NoSevEsAmdSev:
- cli ; Disable interrupt before switching to 32-bit mode
- mov rax, [rsp + 40] ; CountTofinish
- lock dec dword [rax] ; (*CountTofinish)--
-
- mov r10, [rsp + 48] ; Pm16CodeSegment
- mov rax, [rsp + 56] ; SevEsAPJumpTable
- mov rbx, [rsp + 64] ; WakeupBuffer
- mov rsp, r9 ; TopOfApStack
-
- push rax ; Save SevEsAPJumpTable
- push rbx ; Save WakeupBuffer
- push r10 ; Save Pm16CodeSegment
- push rcx ; Save MwaitSupport
- push rdx ; Save ApTargetCState
-
- lea rax, [PmEntryAmdSev] ; rax <- The start address of transition code
-
- push r8
- push rax
-
- ;
- ; Clear R8 - R15, for reset, before going into 32-bit mode
- ;
- xor r8, r8
- xor r9, r9
- xor r10, r10
- xor r11, r11
- xor r12, r12
- xor r13, r13
- xor r14, r14
- xor r15, r15
-
- ;
- ; Far return into 32-bit mode
- ;
-o64 retf
-
-BITS 32
-PmEntryAmdSev:
- mov eax, cr0
- btr eax, 31 ; Clear CR0.PG
- mov cr0, eax ; Disable paging and caches
-
- mov ecx, 0xc0000080
- rdmsr
- and ah, ~ 1 ; Clear LME
- wrmsr
- mov eax, cr4
- and al, ~ (1 << 5) ; Clear PAE
- mov cr4, eax
-
- pop edx
- add esp, 4
- pop ecx,
- add esp, 4
-
-MwaitCheckAmdSev:
- cmp cl, 1 ; Check mwait-monitor support
- jnz HltLoopAmdSev
- mov ebx, edx ; Save C-State to ebx
-MwaitLoopAmdSev:
- cli
- mov eax, esp ; Set Monitor Address
- xor ecx, ecx ; ecx = 0
- xor edx, edx ; edx = 0
- monitor
- mov eax, ebx ; Mwait Cx, Target C-State per eax[7:4]
- shl eax, 4
- mwait
- jmp MwaitLoopAmdSev
-
-HltLoopAmdSev:
- pop edx ; PM16CodeSegment
- add esp, 4
- pop ebx ; WakeupBuffer
- add esp, 4
- pop eax ; SevEsAPJumpTable
- add esp, 4
- cmp eax, 0 ; Check for SEV-ES
- je DoHltAmdSev
-
- cli
- ;
- ; SEV-ES is enabled, use VMGEXIT (GHCB information already
- ; set by caller)
- ;
-BITS 64
- rep vmmcall
-BITS 32
-
- ;
- ; Back from VMGEXIT AP_HLT_LOOP
- ; Push the FLAGS/CS/IP values to use
- ;
- push word 0x0002 ; EFLAGS
- xor ecx, ecx
- mov cx, [eax + 2] ; CS
- push cx
- mov cx, [eax] ; IP
- push cx
- push word 0x0000 ; For alignment, will be discarded
-
- push edx
- push ebx
-
- mov edx, esi ; Restore RDX reset value
-
- retf
-
-DoHltAmdSev:
- cli
- hlt
- jmp DoHltAmdSev
-
-BITS 64
-AsmRelocateApLoopAmdSevEnd:
;-------------------------------------------------------------------------------------
; AsmRelocateApLoop (MwaitSupport, ApTargetCState, TopOfApStack, CountTofinish, Cr3);
--
2.36.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#100579): https://edk2.groups.io/g/devel/message/100579
Mute This Topic: https://groups.io/mt/97309040/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list