[edk2-devel] [PATCH 6/6] SimicsOpenBoardPkg: Disable DriverBindingSupport perf logging

[Ni, Ray]

Sending to correct address of Zhiguang.

> -----Original Message-----
> From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Ni, Ray
> Sent: Wednesday, May 24, 2023 8:29 PM
> To: devel at edk2.groups.io
> Cc: Desimone, Nathaniel L <nathaniel.l.desimone at intel.com>; Zhiguang Liu
> <zhiguang at liu@intel.com>; Kinney, Michael D <michael.d.kinney at intel.com>
> Subject: [edk2-devel] [PATCH 6/6] SimicsOpenBoardPkg: Disable
> DriverBindingSupport perf logging
> 
> DriverBindingSupport() is called lots of time during post.
> If it's also included in the perf logging, it's very easy to use all
> the FPDT table memory pre-allocated at EndOfDxe because the
> driver binding connect process happens after EndOfDxe.
> 
> PcdExtFpdtBootRecordPadSize was added for holding the
> perf-logging records after EndOfDxe. But the DriverBindingSupport
> records are just too many. For example, SimicsOpenBoardPkg has
> to set this PCD to almost 100x bigger than the default value in order
> to hold all the perf-logging records.
> 
> Platform developers are usually not aware of missing some records
> after EndOfDxe because those records are all about driverbinding
> support/start/stop. But if we add more perf-logging inside SMM,
> those SMM records will be missed in the final FPDT table because
> DxeCorePerformanceLib collects those SMM records at ReadyToBoot
> event. Since the FPDT cannot hold all driverbinding records, it
> definitely cannot hold those SMM records as well.
> 
> So in order to hold all SMM perf loggings, either platform should
> set PcdExtFpdtBootRecordPadSize to a large enough value, or
> as what this patch does, to disable the driverbinding support
> perf-logging.
> 
> Signed-off-by: Ray Ni <ray.ni at intel.com>
> Cc: Nate DeSimone <nathaniel.l.desimone at intel.com>
> Cc: Zhiguang Liu <zhiguang at liu@intel.com>
> Cc: Michael D Kinney <michael.d.kinney at intel.com>
> ---
>  .../BoardX58Ich10/OpenBoardPkgPcd.dsc                 | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git
> a/Platform/Intel/SimicsOpenBoardPkg/BoardX58Ich10/OpenBoardPkgPcd.ds
> c
> b/Platform/Intel/SimicsOpenBoardPkg/BoardX58Ich10/OpenBoardPkgPcd.ds
> c
> index b6672d1a78..6b969ab1f5 100644
> ---
> a/Platform/Intel/SimicsOpenBoardPkg/BoardX58Ich10/OpenBoardPkgPcd.ds
> c
> +++
> b/Platform/Intel/SimicsOpenBoardPkg/BoardX58Ich10/OpenBoardPkgPcd.ds
> c
> @@ -132,7 +132,16 @@
>    gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x10
> 
>    gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|0x0
> 
>  !if gMinPlatformPkgTokenSpaceGuid.PcdPerformanceEnable == TRUE
> 
> -  gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|0x1
> 
> +  #  BIT0 - Enable Performance Measurement.<BR>
> 
> +  #  BIT1 - Disable Start Image Logging.<BR>
> 
> +  #  BIT2 - Disable Load Image logging.<BR>
> 
> +  #  BIT3 - Disable Binding Support logging.<BR>
> 
> +  #  BIT4 - Disable Binding Start logging.<BR>
> 
> +  #  BIT5 - Disable Binding Stop logging.<BR>
> 
> +  #  BIT6 - Disable all other general Perfs.<BR>
> 
> +  #  BIT1-BIT6 are evaluated when BIT0 is set.<BR>
> 
> +  #  Enable performance measurement but disable driver binding support
> logging.
> 
> +  gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|0x09
> 
>  !endif
> 
>  !if $(TARGET) == "RELEASE"
> 
>    gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x03
> 
> --
> 2.39.1.windows.1
> 
> 
> 
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#105235):
> https://edk2.groups.io/g/devel/message/105235
> Mute This Topic: https://groups.io/mt/99107262/1712937
> Group Owner: devel+owner at edk2.groups.io
> Unsubscribe:
> https://edk2.groups.io/g/devel/leave/3759105/1712937/893644498/xyzzy
> [ray.ni at intel.com]
> -=-=-=-=-=-=
> 



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#105293): https://edk2.groups.io/g/devel/message/105293
Mute This Topic: https://groups.io/mt/99122387/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/leave/3943202/1813853/130120423/xyzzy [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-