[edk2-devel] [PATCH v2 0/2] dp command without ACPI

[Jeff Brasen via groups.io]

Anything else needed on this to get it merged?

Thanks,
Jeff

> -----Original Message-----
> From: gaoliming <gaoliming at byosoft.com.cn>
> Sent: Tuesday, September 12, 2023 6:59 AM
> To: Jeff Brasen <jbrasen at nvidia.com>; devel at edk2.groups.io
> Cc: jian.j.wang at intel.com; dandan.bi at intel.com; zhichao.gao at intel.com
> Subject: 回复: [PATCH v2 0/2] dp command without ACPI
> 
> External email: Use caution opening links or attachments
> 
> 
> For the change in MdeModulePkg, Reviewed-by: Liming Gao
> <gaoliming at byosoft.com.cn>
> 
> > -----邮件原件-----
> > 发件人: Jeff Brasen <jbrasen at nvidia.com>
> > 发送时间: 2023年9月12日 4:39
> > 收件人: devel at edk2.groups.io
> > 抄送: jian.j.wang at intel.com; gaoliming at byosoft.com.cn;
> > dandan.bi at intel.com; zhichao.gao at intel.com
> > 主题: RE: [PATCH v2 0/2] dp command without ACPI
> >
> >
> > Any additional thoughts/feedback on this patch series?
> >
> > Thanks,
> > Jeff
> >
> >
> > > -----Original Message-----
> > > From: Jeff Brasen <jbrasen at nvidia.com>
> > > Sent: Friday, June 30, 2023 11:30 AM
> > > To: devel at edk2.groups.io
> > > Cc: jian.j.wang at intel.com; gaoliming at byosoft.com.cn;
> > dandan.bi at intel.com;
> > > zhichao.gao at intel.com; Jeff Brasen <jbrasen at nvidia.com>
> > > Subject: [PATCH v2 0/2] dp command without ACPI
> > >
> > > Systems that do not boot with ACPI (system that use device tree for
> > example)
> > > can not use the shell dp command. This patch adds this to the
> configuration
> > > table so that dp command can get this without the FPDT table.
> > >
> > > I am open to other ways for this to be passed if desired (Installed
> protocol,
> > > handler of the status code, etc) but wanted to post this to at least
> > > get thoughts on this.
> > >
> > > Change Log
> > > v2 - Fix missing cast for IA32 builds
> > >
> > > -Jeff
> > >
> > > Jeff Brasen (2):
> > >   MdeModulePkg/DxeCorePerformanceLib: Install BPDT in config table
> > >   ShellPkg/Dp: Allow dp command to work without ACPI
> > >
> > >  ShellPkg/DynamicCommand/DpDynamicCommand/DpApp.inf    |  1 +
> > >  .../DpDynamicCommand/DpDynamicCommand.inf             |  1 +
> > >  .../DxeCorePerformanceLib/DxeCorePerformanceLib.c     |  2 ++
> > >  ShellPkg/DynamicCommand/DpDynamicCommand/Dp.c         | 11
> > ++++++++-
> > > --
> > >  4 files changed, 12 insertions(+), 3 deletions(-)
> > >
> > > --
> > > 2.25.1
> 
> 



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#109318): https://edk2.groups.io/g/devel/message/109318
Mute This Topic: https://groups.io/mt/101756432/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-