[edk2-devel] [PATCH V2 1/1] MdeModulePkg/XhciDxe: Abort the Address Device cmd when time out
Wu, Hao A
hao.a.wu at intel.com
Mon Sep 25 04:09:57 UTC 2023
Pushed via:
PR - https://github.com/tianocore/edk2/pull/4863
Commit - https://github.com/tianocore/edk2/commit/d11f0ea045f598e08b414eeba4f8a74ac1b4ca0b
Best Regards,
Hao Wu
> -----Original Message-----
> From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Wu, Hao
> A
> Sent: Thursday, September 21, 2023 2:17 PM
> To: Cai, Xianglei <xianglei.cai at intel.com>; devel at edk2.groups.io
> Cc: Ni, Ray <ray.ni at intel.com>; Wang, Jian J <jian.j.wang at intel.com>; Gao,
> Liming <gaoliming at byosoft.com.cn>; Shih, More <more.shih at intel.com>;
> Huang, Jenny <jenny.huang at intel.com>
> Subject: Re: [edk2-devel] [PATCH V2 1/1] MdeModulePkg/XhciDxe: Abort the
> Address Device cmd when time out
>
> Reviewed-by: Hao A Wu <hao.a.wu at intel.com>
>
> Best Regards,
> Hao Wu
>
> > -----Original Message-----
> > From: Cai, Xianglei <xianglei.cai at intel.com>
> > Sent: Thursday, September 21, 2023 11:58 AM
> > To: devel at edk2.groups.io
> > Cc: Cai, Xianglei <xianglei.cai at intel.com>; Wu, Hao A
> <hao.a.wu at intel.com>;
> > Ni, Ray <ray.ni at intel.com>; Wang, Jian J <jian.j.wang at intel.com>; Gao,
> > Liming <gaoliming at byosoft.com.cn>; Shih, More <more.shih at intel.com>;
> > Huang, Jenny <jenny.huang at intel.com>
> > Subject: [PATCH V2 1/1] MdeModulePkg/XhciDxe: Abort the Address Device
> > cmd when time out
> >
> > https://bugzilla.tianocore.org/show_bug.cgi?id=4552
> >
> > Following XHCI spec 4.6.1.2, software may abort the
> > execution of Address Device Command when command failed
> > due to timeout.
> >
> > Cc: Hao A Wu <hao.a.wu at intel.com>
> > Cc: Ray Ni <ray.ni at intel.com>
> > Cc: Jian J Wang <jian.j.wang at intel.com>
> > Cc: Liming Gao <gaoliming at byosoft.com.cn>
> > Cc: More Shih <more.shih at intel.com>
> > Cc: Jenny Huang <jenny.huang at intel.com>
> > Signed-off-by: Xianglei Cai <xianglei.cai at intel.com>
> > ---
> > MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c | 36
> > ++++++++++++++++++++++++
> > 1 file changed, 36 insertions(+)
> >
> > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c
> > b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c
> > index 53421e64a850..f6efcf80f376 100644
> > --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c
> > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c
> > @@ -2121,6 +2121,26 @@ RingIntTransferDoorBell (
> > return EFI_SUCCESS;
> > }
> >
> > +/**
> > + Set Command abort
> > +
> > + @param Xhc The XHCI Instance.
> > + @param SlotId The slot id to be disabled.
> > +
> > +**/
> > +VOID
> > +XhcCmdRingCmdAbort (
> > + IN USB_XHCI_INSTANCE *Xhc,
> > + IN UINT8 SlotId
> > + )
> > +{
> > + //
> > + // Set XHC_CRCR_CA bit in XHC_CRCR_OFFSET to abort command.
> > + //
> > + DEBUG ((DEBUG_INFO, "Command Ring Control set Command Abort,
> > SlotId: %d\n", SlotId));
> > + XhcSetOpRegBit (Xhc, XHC_CRCR_OFFSET, XHC_CRCR_CA);
> > +}
> > +
> > /**
> > Assign and initialize the device slot for a new device.
> >
> > @@ -2331,6 +2351,14 @@ XhcInitializeDeviceSlot (
> > Xhc->UsbDevContext[SlotId].XhciDevAddr = DeviceAddress;
> > } else {
> > DEBUG ((DEBUG_ERROR, " Slot %d address not assigned successfully.
> > Status = %r\n", SlotId, Status));
> > + //
> > + // Software may abort the execution of Address Device Command when
> > command failed
> > + // due to timeout by following XHCI spec. 4.6.1.2.
> > + //
> > + if (Status == EFI_TIMEOUT) {
> > + XhcCmdRingCmdAbort (Xhc, SlotId);
> > + }
> > +
> > XhcDisableSlotCmd (Xhc, SlotId);
> > }
> >
> > @@ -2547,6 +2575,14 @@ XhcInitializeDeviceSlot64 (
> > Xhc->UsbDevContext[SlotId].XhciDevAddr = DeviceAddress;
> > } else {
> > DEBUG ((DEBUG_ERROR, " Slot %d address not assigned successfully.
> > Status = %r\n", SlotId, Status));
> > + //
> > + // Software may abort the execution of Address Device Command when
> > command failed
> > + // due to timeout by following XHCI spec. 4.6.1.2.
> > + //
> > + if (Status == EFI_TIMEOUT) {
> > + XhcCmdRingCmdAbort (Xhc, SlotId);
> > + }
> > +
> > XhcDisableSlotCmd64 (Xhc, SlotId);
> > }
> >
> > --
> > 2.42.0.windows.2
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#109035): https://edk2.groups.io/g/devel/message/109035
Mute This Topic: https://groups.io/mt/101493909/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list