<DIV>Problem Definition:<BR>I have the following server system Configuration.<BR>Red Hat Linux release 7.3 (Valhalla)<BR>Kernel 2.4.18-27.7.xsmp on an i686<BR>There are two local scsi disc drives on the system configured as RAID 1<BR>using the onboard Hardware RAID Controller. </DIV>
<DIV> </DIV>
<DIV>All the basic linux volumes(partitions) i.e<BR></DIV>
<DIV>/, / root, /boot, /home, /usr, /var, /tmp, /dev/shm </DIV>
<DIV> </DIV>
<DIV>are mounted of the above local hard drive RAID 1 configuration as /dev/sdb1 thro /dev/sdb8.</DIV>
<DIV> </DIV>
<DIV>In addition to the above i have another volume dedicated to an <BR>application which is mounted of a SAN storage device via a emulex fiber channel <BR>link which is mounted as /dev/sda1.</DIV>
<DIV><BR>The problem is whenever the system mounts this particular volume of the <BR>SAN, the system generates the following error messages on the console.</DIV>
<DIV> </DIV>
<DIV>"ext3-fs warning : ext3_block_to_path block <0 "</DIV>
<DIV> </DIV>
<DIV>This messages continues to be generated, and is once in approx 2 months causing the system to crash. <BR></DIV>
<DIV>The problem is such that the system cannot be logged into even from the<BR>console. Only a powercycle of the system works.  Interestingly i have<BR>another system with the same hardware and software configuration and <BR>setup which works perfectly fine.</DIV>
<DIV> </DIV>
<DIV>Though i am not sure it seems to be an issue with a specific file or <BR>block on the mount device. However your suggestions or advice on how to go <BR>about and fix the above problem as soon as possible would be more than <BR>helpful and really appreciated.</DIV>
<DIV> </DIV>
<DIV>Sincerely<BR>Deepan.</DIV><p>
                <hr size=1><font face=arial size=-1>Do you Yahoo!?<br>
Yahoo! Photos: <a href="http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=23765/*http://photos.yahoo.c
om/ph/print_splash">High-quality 4x6 digital prints for 25¢</a>