[    0.000000] Bootdata ok (command line is root=/dev/sda1 ro quiet splash)
[    0.000000] Linux version 2.6.17-10-generic (root@king) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Dec 5 21:16:35 UTC 2006 (Ubuntu 2.6.17-10.34-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007bff0000 (usable)
[    0.000000]  BIOS-e820: 000000007bff0000 - 000000007bff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007bff3000 - 000000007c000000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007c000000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 GBT                                   ) @ 0x00000000000f6bf0
[    0.000000] ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007bff3000
[    0.000000] ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007bff3040
[    0.000000] ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x000000007bff7a40
[    0.000000] ACPI: MCFG (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007bff7b80
[    0.000000] ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007bff79c0
[    0.000000] ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 1
[    0.000000] Node 0 MemBase 0000000000000000 Limit 000000007bff0000
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Using node hash shift of 63
[    0.000000] Bootmem setup node 0 0000000000000000-000000007bff0000
[    0.000000] On node 0 totalpages: 499496
[    0.000000]   DMA zone: 2591 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 496905 pages, LIFO batch:31
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:15 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[    0.000000] Checking aperture...
[    0.000000] CPU 0: aperture @ 8d2000000 size 32 MB
[    0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[    0.000000] No AGP bridge found
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: root=/dev/sda1 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[    0.000000] time.c: Detected 2210.099 MHz processor.
[   31.496149] Console: colour VGA+ 80x25
[   31.497187] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   31.498828] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   31.517245] Memory: 1988984k/2031552k available (2129k kernel code, 42180k reserved, 1424k data, 188k init)
[   31.595282] Calibrating delay using timer specific routine.. 4423.97 BogoMIPS (lpj=8847954)
[   31.595331] Security Framework v1.0.0 initialized
[   31.595338] SELinux:  Disabled at boot.
[   31.595358] Mount-cache hash table entries: 256
[   31.595487] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   31.595490] CPU: L2 Cache: 512K (64 bytes/line)
[   31.595493] CPU 0/0(1) -> Node 0 -> Core 0
[   31.595509] SMP alternatives: switching to UP code
[   31.595732] checking if image is initramfs... it is
[   32.041938] Freeing initrd memory: 5746k freed
[   32.045044] ACPI: Core revision 20060707
[   32.048253] ACPI: Looking for DSDT ... not found!
[   32.092416] Using local APIC timer interrupts.
[   32.137634] result 12557381
[   32.137635] Detected 12.557 MHz APIC timer.
[   32.138968] Brought up 1 CPUs
[   32.139010] testing NMI watchdog ... OK.
[   32.179051] migration_cost=0
[   32.179272] NET: Registered protocol family 16
[   32.179296] ACPI: bus type pci registered
[   32.182375] PCI: Using MMCONFIG at f0000000
[   32.182403] PCI: No mmconfig possible on device 0:18
[   32.189811] ACPI: Interpreter enabled
[   32.189813] ACPI: Using IOAPIC for interrupt routing
[   32.190245] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   32.190248] PCI: Probing PCI hardware (bus 00)
[   32.193809] Boot video device is 0000:00:05.0
[   32.194098] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0d.0
[   32.194587] PCI: Transparent bridge - 0000:00:10.0
[   32.194615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   32.291383] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   32.292777] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
[   32.293059] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.293342] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
[   32.293627] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.293909] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.294191] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.294475] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 *10 11 14 15)
[   32.294756] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.295054] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[   32.295335] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.295622] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[   32.295903] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.296188] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[   32.296469] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.296751] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.297036] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[   32.297319] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[   32.297604] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   32.297887] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[   32.298169] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[   32.298535] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[   32.298892] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[   32.299246] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[   32.299597] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[   32.299954] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[   32.300309] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[   32.300662] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[   32.301014] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[   32.301369] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[   32.301724] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[   32.302079] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[   32.302436] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[   32.302792] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[   32.303175] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[   32.303529] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[   32.303882] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[   32.304236] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[   32.304589] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[   32.304948] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[   32.305302] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[   32.305656] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[   32.308209] Linux Plug and Play Support v0.97 (c) Adam Belay
[   32.308219] pnp: PnP ACPI init
[   32.313551] pnp: PnP ACPI: found 14 devices
[   32.313600] PCI: Using ACPI for IRQ routing
[   32.313605] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   32.313770] PCI-DMA: Disabling IOMMU.
[   32.314302] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[   32.314305] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[   32.314307] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[   32.314310] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[   32.314312] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[   32.314315] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[   32.314319] pnp: 00:01: ioport range 0x2000-0x207f has been reserved
[   32.314322] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
[   32.314488] PCI: Bridge: 0000:00:02.0
[   32.314490]   IO window: 7000-7fff
[   32.314493]   MEM window: disabled.
[   32.314494]   PREFETCH window: disabled.
[   32.314496] PCI: Bridge: 0000:00:03.0
[   32.314498]   IO window: 8000-8fff
[   32.314500]   MEM window: disabled.
[   32.314501]   PREFETCH window: disabled.
[   32.314503] PCI: Bridge: 0000:00:04.0
[   32.314505]   IO window: 9000-9fff
[   32.314507]   MEM window: disabled.
[   32.314508]   PREFETCH window: disabled.
[   32.314510] PCI: Bridge: 0000:00:10.0
[   32.314512]   IO window: a000-afff
[   32.314515]   MEM window: f5000000-f50fffff
[   32.314518]   PREFETCH window: disabled.
[   32.314527] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   32.314531] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   32.314535] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   32.314541] PCI: Setting latency timer of device 0000:00:10.0 to 64
[   32.314596] NET: Registered protocol family 2
[   32.350829] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[   32.351182] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   32.353471] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   32.354075] TCP: Hash tables configured (established 262144 bind 65536)
[   32.354079] TCP reno registered
[   32.354429] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   32.354729] audit: initializing netlink socket (disabled)
[   32.354739] audit(1170009009.860:1): initialized
[   32.354886] VFS: Disk quotas dquot_6.5.1
[   32.354906] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   32.354950] Initializing Cryptographic API
[   32.354954] io scheduler noop registered
[   32.354960] io scheduler anticipatory registered
[   32.354969] io scheduler deadline registered
[   32.354983] io scheduler cfq registered (default)
[   32.355376] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   32.355380] pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
[   32.355393] assign_interrupt_mode Found MSI capability
[   32.355423] Allocate Port Service[0000:00:02.0:pcie00]
[   32.355452] Allocate Port Service[0000:00:02.0:pcie03]
[   32.355481] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   32.355483] pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
[   32.355496] assign_interrupt_mode Found MSI capability
[   32.355511] Allocate Port Service[0000:00:03.0:pcie00]
[   32.355536] Allocate Port Service[0000:00:03.0:pcie03]
[   32.355563] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   32.355565] pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
[   32.355578] assign_interrupt_mode Found MSI capability
[   32.355592] Allocate Port Service[0000:00:04.0:pcie00]
[   32.355616] Allocate Port Service[0000:00:04.0:pcie03]
[   32.373063] Real Time Clock Driver v1.12ac
[   32.373102] Linux agpgart interface v0.101 (c) Dave Jones
[   32.373105] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   32.373229] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   32.373375] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   32.373784] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   32.373973] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   32.374138] mice: PS/2 mouse device common for all mice
[   32.374576] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   32.374803] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   32.374807] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   32.374982] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   32.936227] serio: i8042 AUX port at 0x60,0x64 irq 12
[   32.937678] serio: i8042 KBD port at 0x60,0x64 irq 1
[   32.937902] TCP bic registered
[   32.937909] NET: Registered protocol family 1
[   32.937915] NET: Registered protocol family 8
[   32.937917] NET: Registered protocol family 20
[   32.945834] ACPI: (supports S0 S1 S4 S5)
[   32.945878] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   32.945896] Freeing unused kernel memory: 188k freed
[   32.985428] input: AT Translated Set 2 keyboard as /class/input/input0
[   33.020671] vga16fb: initializing
[   33.020676] vga16fb: mapped to 0xffff8100000a0000
[   33.207393] Console: switching to colour frame buffer device 80x25
[   33.207398] fb0: VGA16 VGA frame buffer device
[   34.338993] Capability LSM initialized
[   34.367669] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[   34.367675] ACPI: Getting cpuindex for acpiid 0x1
[   34.701741] SCSI subsystem initialized
[   34.704902] libata version 1.20 loaded.
[   34.705866] sata_nv 0000:00:0e.0: version 0.8
[   34.706290] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[   34.706295] GSI 16 sharing vector 0xD1 and IRQ 16
[   34.706298] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 209
[   34.706386] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   34.706460] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 209
[   34.706478] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 209
[   34.912941] ata1: SATA link up 3.0 Gbps (SStatus 123)
[   35.080974] ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4063 85:7469 86:3c41 87:4063 88:407f
[   35.080978] ata1: dev 0 ATA-7, max UDMA/133, 490232639 sectors: LBA48
[   35.092963] ata1: dev 0 configured for UDMA/133
[   35.092966] scsi0 : sata_nv
[   35.300660] ata2: SATA link up 3.0 Gbps (SStatus 123)
[   35.468701] ata2: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4063 85:7469 86:3c41 87:4063 88:407f
[   35.468704] ata2: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48
[   35.480688] ata2: dev 0 configured for UDMA/133
[   35.480691] scsi1 : sata_nv
[   35.481296]   Vendor: ATA       Model: WDC WD2500YS-01S  Rev: 20.0
[   35.481304]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   35.486596]   Vendor: ATA       Model: WDC WD2500YS-01S  Rev: 20.0
[   35.486605]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   35.487102] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[   35.487107] GSI 17 sharing vector 0xD9 and IRQ 17
[   35.487111] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 217
[   35.487200] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[   35.487255] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 217
[   35.487273] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 217
[   35.490045] SCSI device sda: 490232639 512-byte hdwr sectors (250999 MB)
[   35.490056] sda: Write Protect is off
[   35.490058] sda: Mode Sense: 00 3a 00 00
[   35.490069] SCSI device sda: drive cache: write back
[   35.490118] SCSI device sda: 490232639 512-byte hdwr sectors (250999 MB)
[   35.490125] sda: Write Protect is off
[   35.490127] sda: Mode Sense: 00 3a 00 00
[   35.490138] SCSI device sda: drive cache: write back
[   35.490142]  sda: sda1 sda2 < sda5 >
[   35.531089] sd 0:0:0:0: Attached scsi disk sda
[   35.531731] SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB)
[   35.532405] sdb: Write Protect is off
[   35.532408] sdb: Mode Sense: 00 3a 00 00
[   35.532435] SCSI device sdb: drive cache: write back
[   35.532482] SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB)
[   35.532497] sdb: Write Protect is off
[   35.532499] sdb: Mode Sense: 00 3a 00 00
[   35.532510] SCSI device sdb: drive cache: write back
[   35.532513]  sdb: sdb1
[   35.542503] sd 1:0:0:0: Attached scsi disk sdb
[   35.692383] ata3: SATA link down (SStatus 0)
[   35.692389] scsi2 : sata_nv
[   35.896235] ata4: SATA link up 3.0 Gbps (SStatus 123)
[   36.060272] ata4: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4063 85:7469 86:3c41 87:4063 88:407f
[   36.060276] ata4: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48
[   36.072262] ata4: dev 0 configured for UDMA/133
[   36.072265] scsi3 : sata_nv
[   36.072870]   Vendor: ATA       Model: WDC WD2500YS-01S  Rev: 20.0
[   36.072879]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   36.073337] SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
[   36.073347] sdc: Write Protect is off
[   36.073349] sdc: Mode Sense: 00 3a 00 00
[   36.073361] SCSI device sdc: drive cache: write back
[   36.073404] SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
[   36.073411] sdc: Write Protect is off
[   36.073413] sdc: Mode Sense: 00 3a 00 00
[   36.073424] SCSI device sdc: drive cache: write back
[   36.073427]  sdc: sdc1
[   36.077108] sd 3:0:0:0: Attached scsi disk sdc
[   36.077907] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[   36.077926] NFORCE-MCP51: chipset revision 161
[   36.077928] NFORCE-MCP51: not 100% native mode: will probe irqs later
[   36.077931] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
[   36.077935] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[   36.077943]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[   36.077952]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[   36.077959] Probing IDE interface ide0...
[   36.647699] Probing IDE interface ide1...
[   37.387269] hdc: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
[   38.058850] ide1 at 0x170-0x177,0x376 on irq 15
[   38.067976] hdc: ATAPI 40X DVD-ROM drive, 1725kB Cache, UDMA(66)
[   38.067984] Uniform CD-ROM driver Revision: 3.20
[   38.238666] Probing IDE interface ide0...
[   38.285495] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[   38.285938] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[   38.285943] GSI 18 sharing vector 0xE1 and IRQ 18
[   38.285946] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 225
[   38.285952] PCI: Setting latency timer of device 0000:00:14.0 to 64
[   38.285961] forcedeth: using HIGHDMA
[   38.315630] ieee1394: Initialized config rom entry `ip1394'
[   38.326609] usbcore: registered new driver usbfs
[   38.327088] usbcore: registered new driver hub
[   38.328801] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[   38.806466] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:14.0
[   38.807598] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[   38.807605] GSI 19 sharing vector 0xE9 and IRQ 19
[   38.807608] ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 233
[   38.859395] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[   38.859402] GSI 20 sharing vector 0x32 and IRQ 20
[   38.859405] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 50
[   38.859486] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   38.859491] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[   38.859777] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[   38.872611] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233]  MMIO=[f5004000-f50047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   38.878135] ohci_hcd 0000:00:0b.0: irq 50, io mem 0xf5108000
[   38.936133] usb usb1: configuration #1 chosen from 1 choice
[   38.936153] hub 1-0:1.0: USB hub found
[   38.936162] hub 1-0:1.0: 8 ports detected
[   39.043096] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[   39.043101] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 209
[   39.043212] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[   39.043218] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[   39.043268] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[   39.043299] ehci_hcd 0000:00:0b.1: debug port 1
[   39.043302] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[   39.043310] ehci_hcd 0000:00:0b.1: irq 209, io mem 0xf5104000
[   39.043317] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   39.043370] usb usb2: configuration #1 chosen from 1 choice
[   39.043388] hub 2-0:1.0: USB hub found
[   39.043394] hub 2-0:1.0: 8 ports detected
[   39.201731] Attempting manual resume
[   39.214265] EXT3-fs: INFO: recovery required on readonly filesystem.
[   39.214269] EXT3-fs: write access will be enabled during recovery.
[   40.145868] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0016e60000c4946a]
[   41.526826] kjournald starting.  Commit interval 5 seconds
[   41.526843] EXT3-fs: sda1: orphan cleanup on readonly fs
[   41.526850] ext3_orphan_cleanup: deleting unreferenced inode 6733864
[   41.543718] ext3_orphan_cleanup: deleting unreferenced inode 6733844
[   41.545229] EXT3-fs: sda1: 2 orphan inodes deleted
[   41.545231] EXT3-fs: recovery complete.
[   41.595936] EXT3-fs: mounted filesystem with ordered data mode.
[   48.043276] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   48.046129] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   48.738455] 8139too Fast Ethernet driver 0.9.27
[   48.740097] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   48.740103] GSI 21 sharing vector 0x3A and IRQ 21
[   48.740107] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58
[   48.740751] eth1: RealTek RTL8139 at 0xffffc200100a0000, 00:08:a1:57:6b:94, IRQ 58
[   48.740754] eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
[   48.757936] input: PC Speaker as /class/input/input1
[   48.882038] parport: PnPBIOS parport detected.
[   48.882091] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   48.991870] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   48.993303] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   48.994835] sd 3:0:0:0: Attached scsi generic sg2 type 0
[   49.005289] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[   49.075184] logips2pp: Detected unknown logitech mouse model 1
[   49.141054] Floppy drive(s): fd0 is 1.44M
[   49.146273] eth1: link down
[   49.162474] FDC 0 is a post-1991 82077
[   49.249735] input: PS/2 Logitech Mouse as /class/input/input2
[   49.280645] ts: Compaq touchscreen protocol output
[   49.401221] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   49.401226] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 217
[   49.401306] PCI: Setting latency timer of device 0000:00:10.1 to 64
[   49.786372] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   50.125046] NET: Registered protocol family 17
[   50.159471] lp0: using parport0 (interrupt-driven).
[   50.189138] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[   50.189142] ieee1394: sbp2: Try serialize_io=0 for better performance
[   50.224998] Adding 5839588k swap on /dev/disk/by-uuid/1e988424-bef9-4a9b-9d24-51e00ac983b5.  Priority:-1 extents:1 across:5839588k
[   50.267573] EXT3 FS on sda1, internal journal
[   52.172004] NET: Registered protocol family 10
[   52.172101] lo: Disabled Privacy Extensions
[   52.172429] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   52.172454] IPv6 over IPv4 tunneling driver
[   55.335702] ACPI: Power Button (FF) [PWRF]
[   55.335711] ACPI: Power Button (CM) [PWRB]
[   55.429620] ibm_acpi: ec object not found
[   55.455323] pcc_acpi: loading...
[   55.727774] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[   55.727816] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
[   55.727818] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
[   55.727821] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
[   55.727823] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[   55.727827] cpu_init done, current fid 0xe, vid 0x8
[   60.487093] Bluetooth: Core ver 2.8
[   60.487099] NET: Registered protocol family 31
[   60.487101] Bluetooth: HCI device and connection manager initialized
[   60.487122] Bluetooth: HCI socket layer initialized
[   60.497734] Bluetooth: L2CAP ver 2.8
[   60.497738] Bluetooth: L2CAP socket layer initialized
[   60.515848] Bluetooth: RFCOMM socket layer initialized
[   60.515864] Bluetooth: RFCOMM TTY layer initialized
[   60.515866] Bluetooth: RFCOMM ver 1.7
[   61.990726] eth0: no IPv6 routers present
[ 2359.626088] kjournald starting.  Commit interval 5 seconds
[ 2359.632237] EXT3 FS on sdb1, internal journal
[ 2359.632361] EXT3-fs: mounted filesystem with ordered data mode.
[ 2865.865755] eth0: Promiscuous mode enabled.
[ 2865.865811] device eth0 entered promiscuous mode
[ 2865.865817] audit(1170015114.575:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
[ 2869.058057] device eth0 left promiscuous mode
[ 2869.058065] audit(1170015121.603:3): dev=eth0 prom=0 old_prom=256 auid=4294967295
[ 5057.960058] EXT3-fs error (device sdb1): ext3_free_blocks_sb: bit already cleared for block 52174318
[ 5057.960065] Aborting journal on device sdb1.
[ 5057.964432] EXT3-fs error (device sdb1) in ext3_free_blocks_sb: Journal has aborted
[ 5057.964686] EXT3-fs error (device sdb1) in ext3_free_blocks_sb: Journal has aborted
[ 5057.964930] EXT3-fs error (device sdb1) in ext3_reserve_inode_write: Journal has aborted
[ 5057.965181] EXT3-fs error (device sdb1) in ext3_truncate: Journal has aborted
[ 5057.965433] EXT3-fs error (device sdb1) in ext3_reserve_inode_write: Journal has aborted
[ 5057.965682] EXT3-fs error (device sdb1) in ext3_orphan_del: Journal has aborted
[ 5057.965916] EXT3-fs error (device sdb1) in ext3_reserve_inode_write: Journal has aborted
[ 5057.966167] EXT3-fs error (device sdb1) in ext3_delete_inode: Journal has aborted
[ 5057.966385] __journal_remove_journal_head: freeing b_committed_data
[ 5057.966392] __journal_remove_journal_head: freeing b_committed_data
[ 5057.966397] __journal_remove_journal_head: freeing b_committed_data
[ 5057.966853] ext3_abort called.
[ 5057.966856] EXT3-fs error (device sdb1): ext3_journal_start_sb: Detected aborted journal
[ 5057.966859] Remounting filesystem read-only
